Detailed function introduction of popular color meters

Model Number:NC-81F
Application: Electirc Bike
Controller system matching：YF Controller
Voltage:36V/48V/52V
Meter function：
①Battery power display ②Speed display ③Pas Lever ④Single Mileage
⑤Total Mileage ⑥Max Speed
If you want to know more information you can log on to our website.
www.ncyclebike.com/Product/81...
#electricbicycle #ecofriendly #meter #Display

[@Old_Man_Pete]

I've just got a kit with this display, thank you for a detailed video 👍

[@NCyclebikeCoLtd]

Ok, if you have other questions, or your friends want to buy kits,☺ you can log in to this website ncycle.en.alibaba.com/?spm=a2700.galleryofferlist.wending_right.3.639c1637vRkEjr

[@dg9bfc]

number 14 is not useless ... it is the max current of the controller ... so if your controller and battery can push more as what is set there you can increase it

[@yota_blaster5030]

Thank you!

[@clairethomas5141]

I got a kit with this display, but it just shows my battery as full, when its at about half charge. Nothing in the manual or online seems to be able to tell me how to troubleshoot lol.

[@dave84346]

Hi Can you help i tried setting the pass number in section 16 could not get the screen to return to main page then screen went off and will not power back up any help appreciated

[@orgonist]

How can we change the mode to eco or sport and so on? They all show up after starting up the bike

i got the nc81f display i dont get the 1-3, 1-5, 1-9. anymore first i could get does, but now i can only select 0-3, 0-5, 0-9. i want to put the power assist pas levels, so i can put it on pas 1 say 20% power pas 2 40% pas 3 60% power pas 4 80% pas 5 on 100% but i only get the 0-3, -05, 0-9 in the screen. how do i get it back so i can see them all ? and then change the power/pas levels ?

[@pablox11NEW]

What controllers does support? tx rx

[@partridgejoshad]

Please post a link to the table show at the end of the video, need access to the setting guide.

[@ExclUsive_Rmx]

Hello. I completely understand this display, but I can not figure out how to turn on the "cruise control" mode? (Spetime K6)

[@NCyclebikeCoLtd]

You can log on to our website, we have the most professional staff to give you solutions www.alibaba.com/product-detail/36V-48V-52V-Bicycle-Computer-Wired_1600660897192.html?spm=a2700.shop_plgr.41413.12.783020fdMZiz5e

[@NCyclebikeCoLtd]

Press down button some seconds to get the cruise control mode

[@ExclUsive_Rmx]

@@NCyclebikeCoLtd I did this, it means cruise is not supported by my controller(

[@marcindziegielewski6806]

Ustaw predkosc manetka gazu i jednocześnie przytrzymaj ,,minus,, przez 3 sekundy do momentu aż wlaczy się tempomat.

[@ExclUsive_Rmx]

​​@@marcindziegielewski6806 This is the first thing I did. The function does not work and is not supported by my controller.

[@enjoythegameandmore]

Si può vedere la % della batteria ?

[@elvinvelazquez1679]

Is there to reset the 16p password because 1212 in not working and the display still shows locked.

[@NCyclebikeCoLtd]

please try 1234

[@centralbrawlstarsi5990]

I still have a problem I do not know how to delete the daily mileage?. How to reset trip kilometers??

[@NCyclebikeCoLtd]

Ok, if you have other questions, or your friends want to buy kits,☺ you can log in to this website ncycle.en.alibaba.com/?spm=a2700.galleryofferlist.wending_right.3.639c1637vRkEjr

[@chantelleb507]

hold both side buttons

[@maykonpalacios797]

How to reset to factory settings?

[@centralbrawlstarsi5990]

Hi I have this display, which may be broken does not display the speed and kilometers traveled

[@NCyclebikeCoLtd]

Hi, do you change the settings of lcd display?

[@centralbrawlstarsi5990]

yes a colleague switched in the settings is already well shows the speed

[@MultiBloxx]

I have the same display but I press +&- I get SPp with 4 zero's no options to adjust speed or anything can anybody please help me .

[@NCyclebikeCoLtd]

is it the password? please check 1234 password

[@MultiBloxx]

@@NCyclebikeCoLtd thank you ,can you change the pedal assist percentage in this display

[@MrVideos1000]

i typed in the password 1212 and how do you submit it i leave it and nothing is happening

[@ZevenBoneZDowding]

Press the info button

[@MrHeijerman]

My bike keeps booting up to 16P 0000. No idea what it is asking and 1212 press and hold input doesn’t work

[@lawsonpaolini9049]

Did you purposely lie about setting 14 being current controller limit?

[@ZevenBoneZDowding]

I think it's real ludicrous that you would have to sit there and read the small print to figure out what this guy's trying to do in the commercial in this video.And why instead of talking.He plays this music and he doesn't really even tell you how to do anything ash nine video

[@StonebrakerDoesStuff]

These numbers r diff than mine

[@chantelleb507]

I forgot my password!!!!, is there a reset code!!!???

[@willems7454]

I have no way to help but did you fix it?

[@MrHeijerman]

I’d like to know if there is a way too! I must have set a password by accident? Can’t figure out how to get past the screen.

[@BrunoBBK]

Why lie about p14?