Devilbiss DV1s v Walcom Ego 190 HTE Mini Spray Guns, The Most Expensive Mini Guns There Is

[@HPAcustomriflesandcerakote]

I use to run all Walcom guns and an ego 190 0.7mm hte for cerakote that got used constantly since a lot of my business is cerakoting firearms. It lasted one year thats it. Worked great until it started leaking air and the rebuild kit wouldn't fix it. I switched all my guns over to Devilbiss DV1 and a DV1s 0.7mm/0.9mm for cerakote and like those dv1 guns so much better. Finer atomization, less air pressure and so much less overspray and my 360 Walcoms were even hte

[@peteshobbies5383]

Hi William, I haven't had problems with my Walcoms, but I do suspect that's because I don't use then that much, I'm painting most of the time but have a huge amount to choose from. The DV1 series is a good solid tool. I particularly like the DV1S , as you say, they really are very fine atomisation and should be reliable. cheers buddy, I appreciate the comments 👍

[@bryankelley6687]

You mentioned that the clears don’t do the guns any favors, that’s good, shows how well the guns perform. Thank you, keep ‘em coming

[@peteshobbies5383]

Hi Bryan, Yes, it's a cheap Upol clear coat , I doesn't flow out like many of the better clears so is harder to obtain a flat finish. I obviously think like you as I agree it shows the guns can perform even if materials aren't so willing, Thanks for watching

[@diamonddetails9445]

DV1S 🎉🎉🎉is definitely the champ

[@GigDriving]

Keep them coming. Love It. Pete, what mask do you use for your limited prot to 2K can you link it with replacement filters at all so I can grab the mask and replacement filters when needed. Cheers

[@peteshobbies5383]

Hi Steve and thanks, these are the masks I use, these days I mostly use the Moldex mask kzbin.info/www/bejne/mISpnXymhdR5gdk

[@GigDriving]

@@peteshobbies5383 I never knew that video existed. Great job Thanks a lot ! Ordered

[@peteshobbies5383]

Your welcome mate, the video is a bit old now but nothing has changed

[@deanbrown7643]

Totally bias love devilbis me Pete thanks for the vid😊😊😊😊😊😊

[@peteshobbies5383]

I thought you might mate, they are lovely little gun's although I still can't get over the price of the things even if you do get 2 tips, cheers Dean

[@fromaustralia8871]

Hi pere Try using the DV1S 5 bar in base coat with 1.0 tip and you will get an incredible finish

[@peteshobbies5383]

Hi buddy, 5 bar! , I haven't tried it anywhere near that, doesn't the fan separate top and bottom at that temperature?

[@fromaustralia8871]

@@peteshobbies5383 The fan must be closed more than halfway

[@fromaustralia8871]

@@peteshobbies5383 You will get a small fan but a nice picture

[@peteshobbies5383]

@@fromaustralia8871 Ok, I'll give it a try

[@olegmurillo2585]

Здравствуйте, один человек с большим опытом, сравнил DeVilbiss DV1 smart repair 1S+ 1.2 с Walcom EGO Carbonio HALO ( HTE ) 1.2 . Результат такой - DV1 1S+ 1.2 больше подходит для лака и на базе хорошо работает, Walcom EGO Carbonio HTE 1.2 лучше подходит для базы и для быстрыго лака . В результате этот человек выбрал два EGO HTE 1.4 для лака и EGO HTE 1.2 для базы . Я тоже купил себе EGO HTE 1.2 , но думаю куплю и DeVilbiss DV1 smart repair.

[@peteshobbies5383]

Hi Mate, I know a lot of people like the Walcom Ego, I'm not one of them, imo the Devilbiss is a much better gun and now that its available in 1.4 also, it makes it a better clear coat gun.

[@olegmurillo2585]

​@@peteshobbies5383 спасибо, я не знал что DeVilbiss DV1 smart repair 1S+ есть с головой 1.4 . У нас на рынке много фирм Iwata, SATA , DeVilbiss, Walcom, Sagola, ANI но самая популярная Walcom. У меня был Walcom X light HTE 1.3 , он мне стал не нужен, в последнее время я стал смотреть на DeVilbiss.

[@Алекс-г8д6д]

Walcom Ego mini 1,2 HTE 🔥!)

[@peteshobbies5383]

Hi buddy, I know many people like them, but of all the Walcoms, I own it's by far the most disappointing for me especially considering the price, in the UK anyway 👍

[@slevinkelevra8696]

Clear dv1s, base ego 190 halo!!

[@peteshobbies5383]

Hi Mate, It sounds like you prefer the Walcom to the DV1S for basecoat?

[@slevinkelevra8696]

@@peteshobbies5383 I find Walcom much more precise on the color especially on particular metallic paints where the color tone depends on the quantity of paint applied, and Walcom applies precisely and quite slowly!!

[@peteshobbies5383]

@slevinkelevra8696 Yeah, I can understand that, the Devilbiss has a huge fan, although the S2 cap is better and is really the base coat cap. The LPH80 is an excellent gun for more precise applications with the W300WB and LPH300 being better for bigger areas Thanks mate 👍

[@JohnWD40TC02]

Hi Pete, a very very good comparison as both guns are the top of the range from both manufactures, I've always been on the fence with the/any Walcom gun as I can't get past the look of them, they just look cheap and plasticky which was confirmed when I won the Slim Kombat but don't get me wrong as it sprays fine but I feel like I'm using a toy spray gun🤔 You can see in the video that both guns give a great finish so either gun would probably be fine if you are looking for a high quality mini gun but for me the DV1S is the gun to go for as it's nice to hold and use, I can tell in the video that the DV1S is slower than the 190 but IMO it's a small price to pay, sorry to all Walcom fans but I'm just a Devilbiss fanboy😁😅 Great video mate and both tanks look superb👌👍

[@peteshobbies5383]

Hi John, I like the Walcom range especially the Carbon 360 HTE and the Ego isn't bad, there are cases in which it is better and may be as an all rounder for some, but the DV1S has definitely got something above the Walcom when it comes to atomisation, cheers mate

[@rogerstephens8980]

Walcom the same as geo

[@peteshobbies5383]

Hi Roger, The ego is a mini gun. The Geo is a full-size gun and quite different

[@rogerstephens8980]

I have 5 or 6 big geo guns usual use my sata rps need a small gun now and then what do think about the large geos I have one new in the box.

[@peteshobbies5383]

I've not used the geo only the HTE versions, which I like

[@jstuart5430]

good video pete been a deviliss user for years jga gfg flg gti cant go past my pro lite te 10/20 have thought about a dv1 s for smart repairs think your vid has made my mind up thanks

[@peteshobbies5383]

Hi Mate, they are a good tool especially for smart repairs, they spray really fine so make blending areas much easier particularly on silvers where you can just edge it out nicely. I was talking to a chap the other day and he was saying he prefers his Sata minijet, when I asked a bit more he was doing mainy bigger areas with it and the DV1s was too slow, in cases like that the Walcom would be better but if you have a resonable bit to do most would use a full size gun. Cheers buddy and thank you

[@jstuart5430]

@@peteshobbies5383 thanks for replying always thought sata was a bit of a cannon for paint for me at least happy with a slower style pro lite suits me liked the dv1 c1/c2 cap video will start with a dv1 s see how i go thanks bud

[@peteshobbies5383]

@@jstuart5430 Your welcome mate, be interesting to hear what you think

[@jstuart5430]

@@peteshobbies5383 will update when i get it thanks

[@saifulamri1829]

😍😍😍😍😍

[@peteshobbies5383]

Thanks buddy 👍

[@nayeemnay9987]

😘😘🇧🇩

[@peteshobbies5383]

Thanks buddy!