Devilbiss GTI / PRI / PRO LITE Fluttery Spray Fan Rectification

[@josearmandoromerorios]

Soy de México df ya tengo más de 35 años en el oficio y veo vídeos de esto desde que existe you tube Y es primera ves que veo la correcta técnica para desarmar y armar una pistola Felicidades

[@RepairRefinishTV]

Muchas gracias!

[@wojciechzyczkowski1321]

Świetny pistolet do podkładu;-) bardzo prosty, intuicyjny, łatwo nim pracować! Pozdrawiam:-)

[@RepairRefinishTV]

+WOJCIECH ŻYCZKOWSKI Jest to świetna broń! Dzięki za oglądanie!

[@josecordova896]

Cual es precio de una de la pistola devilbi en chile

[@latouselatrec]

nice camera , I could actually see the gasket was deformed

[@humbertoestrada231]

My gun (tekna prolite) has an air leak between the trigger and needle, when I half way press the trigger it stop but it leaks air , what do I do ? Or get to fix it ?

[@edwardzx7]

Check your manual for the replacement parts. What ever that packing nut is that operates the trigger needs to be replaced.

[@hafeez87official]

where i can find seals devilbiss gti prolite?

[@StinkyDog1971]

any issues with bubbles in the cup? Seems my new Pri primer gun either has a defective cap seal or the baffle plate or spray head has something going on

[@RepairRefinishTV]

+StinkyDog1971 have you made sure the fluid tip is tight enough? If not is the white seal ok? Cheers, Jordan

[@eksine]

Just cut the frayed parts on the hole and reuse gasket. No need to get a new gasket

[@RepairRefinishTV]

The gaskets are cheap for a pack of 5 so its really not worth messing around with them 🙂

[@mattcook160285]

Regards air caps and fluid tips from a GTi Pro will they fit the Pri Pro? Cheers

[@RepairRefinishTV]

+Matthew Cook yes they will fit

[@RepairRefinishTV]

+Matthew Cook yes they will fit

[@mattcook160285]

That's brilliant news thank you

[@michaelclarke647]

Yes but needle is different. All other parts are interchangeable.

[@satamanschmidt3428]

This is why I buy Iwata spray guns. No gaskets so this problem never occurs.

[@CJ-bm9sh]

Funny, I would have taken you for a sata man....

[@NitroAuto77]

@@CJ-bm9sh hahahaha

[@jaykrom7639]

I have never had to replace that gasket...

[@michaeldurdaii7864]

Do you have a part number for these white seals?

[@RepairRefinishTV]

No sorry. Check the devilbiss website. Thanks!

[@michaeldurdaii7864]

Found it Spray Head Seal Devilbiss Number 702726