Devilbiss PRI applying Glasurit wet on wet primer

In this video we will be showing you how to apply a Glasurit wet on wet primer.
The spray gun used is a 1.4 Devilbiss PRI with a P1 aircap
Preparing panel for paint
Mixing ratios for wet on wet
How to apply wet on wet
How to overcoat wet on wet
Note: Half mask is used for this demonstration only. Airfed masks should be worn when operating in a spray booth.
Video contains products and/or logos from Devilbiss.com or glasurit.com methods are of my own and will not be liable for any damages caused. Any music on this channel is copy right free and are from www.bensound.com or machinimasound.com/ Kevin Mcleod

[@ReverseGear]

Thanks. Just what I was looking for. First time shoot wet on wet. And shot went south.

[@lewigas290]

Thanks for responding. I was undecided but will take the Sata route now. I was torn between the 1.8 v 1.6 set up for the 100 brp but you've covered that for me too. Keep them vids coming. Any chance you could do a primer vid with the Sata and talk us through gun set up and what not. Thank you in advance.

[@RepairRefinishTV]

Yea sure will mate thanks for the feedback!

[@user-sm8wo3dj5z]

But its only 1 coat or two? Thanks.

[@lewigas290]

Very informative videos with great content and delivery. Learning loads. Quick question regarding the Pri. Do you prefer the Pri to the Sata 100 brp for your priming and why. Notice you use Sata for base and clears though. If you have both primer guns could you do a review of both against each other. Reason for asking is that I'm undecided which gun to go for. Cheers Jordan.

[@RepairRefinishTV]

Hi mate, I have a sata 1.8 primer gun but not a 1.4 setup for wet on wet. The 1.8 sata is a great gun and really lays the primer down super smooth yet still giving that build you need. As for the Devilbiss, its still a great gun and i do use them but I find with primers it leaves a more orange peel finish therefore, resulting in more time sanding primer. I'll look into doing a video soon using both sata and devilbiss. Hope this helps Jordan

[@adamhawkins9751]

What PSI do you have your gun at when spraying this primer?

[@RepairRefinishTV]

2.0bar 32psi. Thanks!

[@jrallyeb1846]

Great video, what size fluid needle are you using?

[@RepairRefinishTV]

+jrallyeb18 Hi, its a 1.4 Devilbiss PRI with the P1 aircap on. Thanks