2K Primer in "A CAN!"

My new favorite 2K primer in a can. How to use it and how it works.
Spray Max primer 3680031amzn.to/3lNEj80
3M face mask 6800 amzn.to/3Auprj4
Organic Vapor cartridges amzn.to/2Vx1Dw7
Dupli-Color wax and grease remover: amzn.to/3uRa3uo
Assorted wet dry sandpaper amzn.to/3fMPFFc
My Video Gear:
Panasonic GH5 amzn.to/35ZeQgp
Panasonic GH4 with lens amzn.to/2Nb5B7b
Panasonic Lumix 14-140 lens amzn.to/2FOxYmi
PANASONIC LUMIX G X Vario Power Zoom Lens, 14-42MM Power O.I.S
amzn.to/2J3KsJH
Manfrotto 244 Variable Friction Magic Arm: amzn.to/2X7YwIT
Manfrotto 035RL Super Clamp: amzn.to/3dbPWyf
Headphones Sony MDR7506: amzn.to/2ycntIV
Samsung 128Gb MicoSD card with adapter
amzn.to/2CcEFzW
Zhiyun Crane V2 3 Axis Brushless Handheld Gimbal Stabilizer
amzn.to/2NKp2kz
Pergear Tripod Tabletop Stand for the Zhiyun Handheld Gimbal Stabilizer
amzn.to/2NaKWjK
My Audio Gear:
MXL 990, XLR Connector Condenser Microphone: amzn.to/3elRw1K
Shure MVi Digital Audio Interface XLR to USB: amzn.to/2VzjgYa
USB-C to Micro usb cable: amzn.to/3cfcrSb
My Hardware:
Apple 16" MacBook Pro: amzn.to/2VrAI0C
Apple Thunderbolt 3 cable: amzn.to/3clTwVV
G-RAID with Thunderbolt 3 amzn.to/2uQppFx
LG 27UK850-W 27" 4K Monitor: amzn.to/3elxpk7
Apple iPad Pro 12.9-inch: amzn.to/2K5qwp7
Apple pencil 2nd gen: amzn.to/3elyisX
Apple iPad Mini 5: amzn.to/2VrJzPP
Slope stand by whip labs: amzn.to/2APaDSt
Extreme pro SD card USB-C reader: amzn.to/3e4bNb1
Apple USB-C to SD Card Reader: amzn.to/3cgGXeo
ThinkTank Shapeshifter 15" Backpack: amzn.to/2Cc6U1F
.03 styrene white www.ebay.com/i...
.03 styrene black www.ebay.com/i...
.06 styrene black www.ebay.com/i...
.06 styrene white www.ebay.com/i...
Luer lock bottles with needles
www.ebay.com/i...
Music: end credits Rurlyok
rurlyok.bandca...
Contact me through www.botzen.com for design work,
you can follow me on:
Twitter: at / botzendesign (@botzendesign)
Facebook: / botzendesign
Instagram: / botzendesign @botzendesign
Botzen Design Inc.
Industrial Design and Product Visualization
www.botzen.com

[@omunoz9485]

i use this in the automotive collision field and it works amazing! a little tip for people who dont know, if you stick this can in a fridge you can get a week out of it. just be sure to let the can come back up to temp otherwise you will clog the tip

[@EricStrebel]

Great tip! Thanks for sharing, much appreciated

[@terrythomas790]

Put it in the back , where the wifey doesnt see it.

[@machughes3369]

Nice!

[@mortenfransrud7676]

You will risk that the hardener will be degraded because of the low temperature. The supplier we have does not want any customers to put the 2k products in their fridge as ut will not be as effective anymore. The 2k will not function as it should. Just want to throw that in as well.

[@michaelmakemore633]

Specific and technical insights make me very happy. Thanks!

[@Tarbard]

What a smart product. Watching it cover surfaces is very satisfying.

[@robh3267]

I painted cars for a living for over 25 years and some big advantages to 2K primers is better adhesion, little to no shrinkage and the harder surface of the primer helps prevent die back of your topcoats especially over time, they also have the same thing in a clear coat, if applied correctly you can produce some excellent results from a spray can.

[@EricStrebel]

Thanks for your insight, much appreciated!

[@kevinm3751]

I think for the price it is a great deal and having a 24 hour pot life makes it even more valuable. Thanks for the heads up, I know I can use this for sure and ordering 6 cans today...;)

[@WestKyCrime]

Very helpful Human Factors on the spray pattern width adjustability! Few KZbinrs understand this element in content creation and less actually include closeup, stills, and voice over that are technically helpful! Very well done! Thank You Eric, I'm now Subscribed!

[@EricStrebel]

Thanks!

[@midnitebo]

Their 2K Glamour Clear is amazing stuff as well.

[@ddegn]

Any suggestions on what sort of paint to use to add color?

[@machughes3369]

Absolutely! Huge fan of the spray Max 2k, it hardly needs wet sanding and buffing afterwards as well! Very minimal orange Peel if any , but if you get a bum can which I have back in 2021 it will have a Tad orange Peel, but that was with the old tip design

[@75tranzam]

Excellent video, clear and concise and valuable knowledge shared by you. Thanks for posting this!

[@PhonePhone-sf8te]

Thanks for showing this, I've used the clear and this looks like a good addition.

[@blakeschreurs]

I'll be sure to check this out next time I have a project I want to finish well! Would have loved some side-by-side comparisons of primer coats between this and the standard rattle can.

[@DaveMakes]

What good timing, I have a project on the go right now that could use this. Unfortunately I couldn't find anything remotely like this at my local hardware store, so I ended up using wood filler. Going to keep an eye out for this in the future though.

[@EricStrebel]

You won't find this product at your local hardware store you will need to go to a paint supply store if you want to find something like this locally, or you can purchase it online I have a link below in the description

[@PhonePhone-sf8te]

your local paint supply store probably carries it.

[@noampitlik2332]

I use that product. It is very convenient. They make a primer/filler, too.

[@garagemonkeysan]

Great video. Super useful. Did a good job of hiding layer lines. Thanks for putting your life on the line by cutting open the can. : ) Mahalo for sharing! : )

[@EricStrebel]

Lol, thanks! 😄👍🤘

[@yavrielsechelle7431]

Good stuff. Thanks for the product review, and for bringing this kind of tool to light for us.

[@PJ-ee5mc]

Nice video. Eric. Thanks! If you happen you know: When I read about other 2k Epoxy Primers they will often state that one can then paint a regular 2K primer or top coat directly over the epoxy primer without the need to sand or scuff up the epoxy first if this is done within 24 hours. Is this still true with this epoxy primer? You seemed pretty sure about the need to sand it first. Thanks again.

[@EricStrebel]

I use a 2K urethane primer in the video, don't know anything about the epoxy primer

[@PJ-ee5mc]

@@EricStrebel I'm sorry, Eric. My mistake.

[@PatTheRiot]

Im thinking of using the 2k beige epoxy primer to do a set of wheels for a red suv (winter wheels). Do you think the dept in the primer pigment is good enough to clearcoat it directly? I kind of love these basic primer colors, sage green, light grey, beige. Reminds me of vintage wheels.

[@flightsimguides]

i couldn't get the red topper thing to stay in the bottom so I just held it there for a quick test project. Hope that still did the trick. Feel like I wasted a can, though, it wasn't a huge project and I was just testing the epoxy primer. I had 3680032 which says it's an epoxy primer right in the title.

[@BreezyBrickyard]

You is the red cap to just push in the bottom to release the second component and then you don't need it to stay in or to use it again 5:36

[@SpaceLint]

Thanks. Ordered some and excited to try it out. Also picked up some of the DUPO prep stuff. Do you have a recommendation for a 2k primer if one ends up needing a spray gun or for larger projects?

[@EricStrebel]

No, not currently

[@SpaceLint]

@@EricStrebel Thanks for replying. Had to ask 🙂. Love the videos.

[@terrythomas790]

Look up SPI, Southern Polyurethanes Inc. Great primers, paints, and good prices.

[@SpaceLint]

@@terrythomas790 Thanks!

[@terrythomas790]

@@SpaceLint No problem . I just tried out one of these 2k epoxy cans, and not to thrilled with them. No comparison to using an actual gun , where you can control the fluid, and the pressure, to get a smooth wet coat of primer, without being in a heavy cloud. lol. The can sprays so hard the theres a ton of paint fog in the air (too much pressure), and the finish kind of sucked, even if it is just a primer. I just had a small thing to spray so instead of mixing up a batch of primer, and dealing with the pia cleaning of the gun,. I gave this can a try. I wouldn't recommend it for anything other than a small job

[@carlreeves9762]

Eastwood has 2k clear and primer that isn't single use. From 1 can can be used multiple times even weeks apart with less waste.

[@EricStrebel]

Cool

[@sbond1963]

It’s probably like Rust oleum. They put the words 2K on the bottle but it’s not an epoxy primer.

[@spraymax]

Thank you for the great Video! 💯

[@alejandroochoa3541]

I have a question, you said you used the Duplicolor Primer i wanted to use that but was afraid of getting reactions. You think i’ll be ok if i use the Duplicolor if i’ll be using Urethane Sealer and Urethane top coat?

[@EricStrebel]

Yes, but always good to test first

[@jphalip]

Thanks for the video. Would this product work well on a 3d printed part, and would the print layer lines still show afterwards? Or should the lines be sanded before application?

[@EricStrebel]

How is a good idea to send a little bit first, but yes it would work well for a 3D printed part of course

[@ddegn]

*Edit: The clearcoat is two for $37.* Apparently you can get two cans for $37 *(I'm wrong about this).* I'm going to get a set of two and try it out. Any idea if it can be used on foam? I'm particularly interested in protecting EPO. Thanks for sharing the video with us.

[@dj0100]

Do you know if the Spraymax 2k Filler or Epoxy Primers contain isocyanate? Great channel!!

[@EricStrebel]

Yup, sure does

[@TalkingGIJoe]

Looks interesting! Thanks for sharing!

[@zippyholland3001]

Thanks 👍

[@captain6198]

Got 2 questions. 1- Is it any big deal keeping the mixed rattle can after filling in with the accelerator (or whatever is it inside the red cap) ? Is there any expiration date? 2- How are the results with FDM printed parts where sanding is a big pain in the ass due to the small size or details of the printed object? I'm looking for a solution to cover the printing lines of the figures I print in my Ender 3 v2 printer.

[@EricStrebel]

Expiration on the can and supposed to be used within 24-48 hrs once opened. Primer won't change or fix any scale issues.

[@terrythomas790]

ITS a big deal! Its hardener in there that gets mixed with the primer, Once its mixed, it starts to harden ,even inside, but slower. after 24hrs if activated, it wont spray.

[@simonac688.]

Love this channel 👍🌟👍

[@TailEndCustoms]

Love some spraymax 2k

[@YTRocketMan]

Thank you!

[@kenmastersmaster]

Robert miles 🎶

[@TheRealJerseyJoe]

Nice !

[@terrigelbaum8066]

You are so intense about this product you're making want to try it..........

[@EricStrebel]

Good stuff

[@sbond1963]

Can I paint right over this with touchup paint like if I’m doing a door jamb?

[@EricStrebel]

Yeah, I guess, try and experiment and see.

[@rorypirie4357]

Has anyone used this product for a primer for raptor bedliner? Cheers

[@masive_ua6197]

Can use this on a plastic bumper??

[@EricStrebel]

Dunno, have to test it out and see, good luck

[@jamesbrown2375]

I have asked a lot of people and no one has responded back. I’m painting my motorcycle plastic . Will that particular one work on plastic please respond back. The primer that is in the video.

[@EricStrebel]

Depends on the plastic, best to do a test.

[@ericrodriguez4090]

Has anyone tried this on foam?

[@IronMan-yg4qw]

BUT DOES IT COME IN A CAN?

[@EricStrebel]

😄

[@glenfisher728]

Game changer

[@EricStrebel]

Bahaha

[@dale3645]

Can says 3 year life, but will last longer.

[@terrythomas790]

I wouldnt use (buy) anything to old. Activators weaken over time, meaning it wont harden . Dont ask me how I found this out the hard way! lol