How To Make: 93-02 Trans Am "Halo" Tail Lights

[@TyrantTitan.]

Wow, I made that photoshop a long time ago on LS1Tech D; Nice to see someone actually produced it.

[@sterlingcollins3077]

What tail lights did you use in the photoshop?

[@GsStyleModsAndSpecs]

Just ran across your channel due to looking for stand out ideas for a 2001 Transam ws6, that I just purchased for $400. Dude, you're awesome when it comes to this stuff. You have definitely earned a new subscriber.

[@Devon_Lewis]

Thanks man!!

[@robertwales9926]

The sign material is called coroplast.

[@drewjohn8554]

That is the sexiest rear end iv seen in awhile

[@JamesThomas-rl9mo]

Just finished my set and got them installed, thanks for the video!!!

[@FiveJiggawatts]

Make a video of em

[@alexnance4954]

Look good, maybe spread the two lights out more to use more of the space in the tail lights and won’t have a big empty spot. Could make the signals be the rings flashing

[@SummitRacing]

Great video!

[@Devon_Lewis]

Summit Racing thank you!! Wasn’t expecting y’all to comment on my video lol.

[@yuppppppl]

@@Devon_Lewis I need this done 🤷🏾‍♂️

[@Devon_Lewis]

@@yuppppppl I made a video lol so get to putting them together 😂

[@yuppppppl]

@@Devon_Lewis 🤣🤣🤣🤣

[@Stylez-13]

@@Devon_Lewis make some for selling you could make some good money on ebay

[@glennporteous8755]

That sign material is called polycor, plastic cardboard. Love your channel.

[@Devon_Lewis]

Thanks man 👌

[@sholan]

You are very creative. I enjoy your content

[@brewsterred5861]

Cool man. Thanks for sharing this info. I'm going to apply this technique to other vehicles as well.

[@drewwurtz8824]

Love the video man..ive been waiting for this video for awhile 😂

[@michaelzambrano3148]

Badass man! I have a 99 TA I plan on doing this on, and this video helps a lot. Appreciate it!

[@Devon_Lewis]

Michael Zambrano thanks man!

[@dnicioramirez7591]

So I just found your video and I’m wondering if this same set up is possible for me 2004 impala ss. Trying to up date the rear tail lights since they don’t sale any for it.

[@Devon_Lewis]

Possibly? Just have to think outside the box!

[@thehellbird8946]

Have you wired any of these up to the car, I can't find any forums, I spliced the tail light harness and the Red wire left is hooked to the yellow wire, and right red is hooked to dark green, Black to brown and White to black. And for some reason the lights are getting a constant source of power, so they stay on when I turn the car off, and when I hit the turning signal they don't blink like I expected, that side just goes out, vise versa. I wonder if I have to get a sequential flasher to make the tailights flash.. I'm lost.. and it's a must cause I can't drive it like that 😂

[@Devon_Lewis]

I haven’t but I’ve had 2-3 guys that have! If you can message me on instagram @TheCamaroMan_96 I’ll put you in contact with a guy that wired them!

[@thehellbird8946]

@@Devon_Lewis I sent you a message on there 👍

[@lincolnls0416]

Ok what about the 3rd light in the corner.?? Not the reverse light. They have 3 lights plus the reverse light.

[@timothythomas2685]

Would love to see a set of custom taillights for the 00+ Pontiac Bonneville.. Awesome work!..

[@ivanruiz771]

Thanks now I can make some for my Camaro have a good idea on how to make em now

[@Devon_Lewis]

StreetCar Garage this process is not how you make them for Camaro. This only works for Trans Am. The Camaro halos is a totally different and easier process

[@romero.4089]

Devon Lewis tutorial then?

[@LTJohn]

Those are awesome!! Thank you for showing us this!! 😁👍

[@Devon_Lewis]

LTJohn no problem man!

[@kemalkurbanov6205]

Bro I living in Turkmenistan. I have a 96 trans am firebird and I want to converse front & end to 99 model. Can you help me, where I can get this parts in America?

[@thehellbird8946]

I think they might be a little too close together. If those photos are real working tailights. They should be spaced abit further apart. When I go to install them I want them to look like the concept. But I'm going to change it up a little bit. Instead of semi lights I'm going to Use red infinity lights.

[@89imp03]

That's some nice work man 💯

[@Devon_Lewis]

89imp03 thanks man!

[@-itsrobbie-7860]

Soooo since you dont have a TA, could i buy the ones you made already lol

[@-itsrobbie-7860]

Damn, i didnt finish watching the video to see that you wont sell them

[@brandenlove3216]

You never showed how you got the taillights secured are they supposed to free float in the bucket or did you some how bolt them in

[@Devon_Lewis]

You just run a bolt through them to hold them together. Then just bolt the tail lights back in the car like factory

[@jamesburkes987]

Any of them front bumper covers for sale 02 ws6 Trans am . Mine is autographed by smokey and the

[@2001pontiacta]

There cool as hell man, the only thing that would worry me. Is the halos are so bright, I’d be Afraid the people behind me wouldn’t see my brake lights.

[@Devon_Lewis]

WOLFIE true! Lol you can get different ones or halos that light up with the brakes etc.. a ton of options you can do!

[@Zeusifer_]

How would you go about doing the Camaro lights like this

[@Devon_Lewis]

It’s way easier to do Camaros!

[@Zeusifer_]

@@Devon_Lewis is there a post on how to do them?

[@the.reel.mccoy.]

Awesome vid Devon!

[@romero.4089]

The thumbnail is nice

[@ryanrapier4569]

Hey,what panel peice between the tail lights

[@belazsoltlakatos5707]

Perfect!

[@colbycrackcorn5517]

My question is does the one u made look good on the car

[@Devon_Lewis]

I say they probably do.

[@ShannonLewis]

My favorite part is me dead in the back

[@Devon_Lewis]

Shannon Martin ya ya ya lol

[@Arlenerae07]

Great work

[@robbygray9562]

Would you do these for resale? Id buy a set

[@Devon_Lewis]

No! I no longer make parts for people! I used to but never again lol

[@nofinidea5262]

Do you think you would ever make em and sell them for people who have trans ams but not the workspace or tools to assemble them

[@Devon_Lewis]

Nope lol! I used to sell and make custom parts! Worst mistake I ever made! That’s why I make videos showing people how to do stuff

[@1999TransAmWS6]

Nice video

[@Chapaveli5959]

Very dope

[@dakuwolf2514]

Question could i buy the covers break the original front off and replace them with the covers to act like the lense?? I have a 97 grid style

[@Devon_Lewis]

Basically what I did? Lol but you need the honeycombs they are bigger inside

[@dakuwolf2514]

Right but im not wanting to change the internals i was wondering if id be able to keep the grid inside.

[@Devon_Lewis]

@@dakuwolf2514 no you can’t unless you paint some lines or something on the covers. If you leave the grids you won’t be able to see the halos.

[@dakuwolf2514]

Right but im not wanting the halos lol. I wanna keep the grid style

[@MegaMg007]

Thanks for sharing!!!

[@Devon_Lewis]

MegaMg007 no problem I hope it helps💪

[@piercemccauley7079]

i wonder how it would look with the honey combs still threr

[@Devon_Lewis]

You wouldn’t be able to see the halos lol

[@piercemccauley7079]

@@Devon_Lewis would they not shine through the honey comb, or are they like angled so the whole thing shines

[@Devon_Lewis]

@@piercemccauley7079 wouldn’t shine through

[@jasonoviedo1049]

Is the process for a camaro the same? Those would look great on camaro.

[@Devon_Lewis]

Jason Oviedo no totally different process in making the ones for camaro

[@jasonoviedo1049]

You mind giving me some suggestions?? Lol I love those halos on them. By the way great videos.

[@Devon_Lewis]

Jason Oviedo thanks man! And I may make a video showing how to do them. Idk yet only reason I haven’t yet is a buddy of mine sells them.

[@jasonoviedo1049]

Gotcha. If he sells I’m willing to buy. Don’t know if he ships. Maybe you can send me info. Thx by the way for replying.

[@Devon_Lewis]

Jason Oviedo you can look up @ smokey_lsx on Instagram he makes them. I’ve heard he is getting behind or don’t do them as much so if he don’t i will probably make a video later on down the road.

[@partizanovacpartizanovcic2018]

bravo bravo bravo king

[@it0816]

Is it the same process for the camaro taillights

[@Devon_Lewis]

Luis Gonzalez no it’s a totally different process!

[@MrTVBOi]

Where are you from???

[@maldo72]

Great stuff just subbed to your channel

[@Devon_Lewis]

maldo72 thanks man!

[@romero.4089]

What year was the thumbnail looks great

[@Devon_Lewis]

Romero what do you mean?

[@captaindragonslayerking3913]

The video of the lights don't even look like the thumb nail

[@Devon_Lewis]

Captain Dragon Slayer King because the thumbnail is photoshopped that a buddy of mine done and it’s been floating around the internet for years. I don’t have a Trans Am to fit them on but I know of about 5 people that has done them since my video and they look like my thumbnail.

[@captaindragonslayerking3913]

@@Devon_Lewis can you tell me how I really want to do them like that

[@Devon_Lewis]

Captain Dragon Slayer King watch my video? It shows you how to make them.

[@JC-hh7dk]

Is that white trans am yours? I was hoping to get some information on the rear wing and any other pictures from the rear and side?

[@Devon_Lewis]

Jorge Chediak no the car is photoshopped that pic has been going around the internet for years and everyone loved the tail lights but nobody knew how to do them. Which is why I made this video lol

[@JC-hh7dk]

@@Devon_Lewis Ahh OK .thank you for replying.... great video by the way ... well done ...take care

[@victorkirby7652]

Pro tip, USE HEADLIGHT SEALANT NOT SILICONE. if you ever need to pull them back apart, you're not gonna be able to if you use silicone

[@cadenhicks3136]

How you get that rear end?

[@maldo72]

Question how do you wire in the lights to the car ? That would make a good video also

[@Devon_Lewis]

maldo72 should be pretty easy just ground wire. Then there should be 3 wires that go to the bulb already one ground then running and brake/turn. So wire the semi tails to the brake/turn wire and the halos to the running lights then ground it

[@maldo72]

@@Devon_Lewis awesome thank you ,,,, It would be great for you to make anther video explaining all of this which would help stupid people like me 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

[@JonathanTorres-ri6mi]

@@maldo72 did the wire go well because I’m done with the tail lights but I’ve been having my car parked for several days because the fuses keep burning if you have lmk how you did them please would really help a lot !

[@Andretti839TV]

How much u charge to do a set of taillights

[@Devon_Lewis]

I don’t make parts for people.

[@Andretti839TV]

@@Devon_Lewis what about the other guy u mentioned in video

[@Devon_Lewis]

@@Andretti839TV don’t think he does either lol

[@DirtyBird01]

@Devon Lewis do you have any for sale

[@Devon_Lewis]

Mason Wheatley I don’t man

[@terrycroom4716]

Would u make them for customers

[@Devon_Lewis]

Nope I don’t sell parts to people anymore

[@terrycroom4716]

@@Devon_Lewis ok thanks

[@wenguedea]

Can you give this to my self

[@jacobschmidt8556]

Will a third light fit in the corner?

[@Devon_Lewis]

Jacob Schmidt oh ya you can put a 3rd there

[@gorfano]

Where can I see that whole car?

[@Devon_Lewis]

The car in the tumbnail is photoshopped

[@Cheeseburgerperson141]

Is there a link for clear tail light lens? I've looked around but I cant seem to find any

[@Devon_Lewis]

Dave Rodriguez no they are no longer made. I can get them made but it takes about 5 months to get give or take it’s a process lol

[@Cheeseburgerperson141]

@@Devon_Lewis I figured lol I heard theres also another way to get clears but it involves alot of wetsanding and stuff cause you need lt1 tail lights with black grid you can take off the red lens and remove grid but I heard it's a pain in the ass to remove due to that wet sanding and all that

[@Devon_Lewis]

Dave Rodriguez oh ya you can take the lenses off take the red off and take the grid off like you said it’s just a lot of steps and takes awhile. Anything custom especially for fbodies takes so long lol

[@Cheeseburgerperson141]

@@Devon_Lewis so true all that work just for custom led sets lol

[@neighborhoodkids2000]

fantastic video thanks for the info bro im definitely going to give this a go

[@visible6976]

Do you sell this ?

[@handyrams4664]

I don't like the difference between running lights and brake...it's not distinguished enough. Like, I want the brake lights to be a LOT brighter than the running lights.

[@Devon_Lewis]

Handy Rams the reason why is because these are very cheap semi trailer lights I used just for this video as I have no use for these lights lol if you get the better quality lights there is a big difference

[@rudygarcia1677]

Do you have any for sale ???

[@Devon_Lewis]

I don’t! That’s why I made this video so you can make your own 👌

[@christopherdutton8565]

How did you wire them up?

[@Devon_Lewis]

Chris Dutton I don’t have a car to wire them up to. But the halos for my car I used the outside smaller light to run the halos, then for the brake and turn signal basically wire it up to factory harness should be 3 wires ground, turn/brake and running lights. Wire it to the turn/brake and clip the wire for the running lights because you don’t need that for the semi lights.

[@anakinyorel3000gt]

Tuning Pontiac firebird trans am 1998 please

[@jaydenluth6094]

Damnit I’m a year late the items outa stock, ik another website that makes the plastic lense but I’m not tryna pay 200+ for them does anyone know where to get the lense at for cheap?

[@Devon_Lewis]

I made these with tail light covers you don’t need the clear lenses but it does help!

[@JamesThomas-rl9mo]

Go to AVS and order from there website, I ordered from them about a week ago and they came in within the next week

[@JamesThomas-rl9mo]

Jayden the lenses from AVS (the company that makes them)are only like $80 and they do have them in stock right now

[@DreamerSouls]

Would this work some how for the 1979 make?

[@Devon_Lewis]

FireXDragon007 it might I have no idea.

[@nelsonvaliente1748]

How much for you to make me a pair?

[@Devon_Lewis]

I don’t sell them lol only show people how to do them

[@blacksupersport8311]

I got a cheap ebay set to do that instead of using my stock lights.

[@wenguedea]

GTO

[@thewholething8360]

How much

[@Devon_Lewis]

I don’t make and sell stuff to people anymore which is why I made this video to walk you step by step on how to build your own!

[@Swanlord05]

Do what u did and put the honey comb back on

[@Devon_Lewis]

Jim Pittman then you can’t see the halos?

[@Swanlord05]

@@Devon_Lewis really?

[@josephgreco1454]

It looks like it is hard to see when the brake lights come on

[@Devon_Lewis]

Joseph Greco because these are cheap lights if you get the more expensive ones they will be brighter I have a good set but it didn’t have the mounting flange on them

[@wenguedea]

Can you give them to my uncle Lewis

[@dakuwolf2514]

Can i buy the honey comb lenses lol

[@Devon_Lewis]

No lol

[@chadhickey9527]

Dude you could have talked while working. I wanted to watch you work not talk. Now with led lights they are so low voltage they make lights blink fast. Did you have to use resistors?

[@djvinylriche]

Can i ship them to you so you can make them for me and how much would you charge me

[@djvinylriche]

Never mind just saw the end lol

[@DominicMaliksi]

Thumbnail looks like FD RX7 tails

[@wanderoutdoors6094]

Sacrilegious

[@Arlenerae07]

Make me a set for my trans am

[@bluegreenish3394]

This is why you pay 1k for custom leds lights

[@Devon_Lewis]

Yep lol

[@-ouv]

The time lapse of you pulling the cover was nauseating

[@N8tron22]

I think the only thing that you could have done to make it a little nicer is to use ABS plastic instead of the sign material and no painting is required either

[@Devon_Lewis]

I tried that. It’s a lot more work and hard as hell to bend.

[@N8tron22]

Maybe .040 or .050 thick black aluminum sheet metal. Cool video bud keep up the good work