Been following your car itself for a long time. Always wanted to get your stuff when you were building it but always had money going in other places. Truly excited to start doing this stuff. Can't wait to see the Z done and ready. Really hope this takes off my dude. Liked and subbed by me!
@Devon_Lewis5 жыл бұрын
tbash96 thanks man I really appreciate it!
@rgeller562 жыл бұрын
Tail light bulbs I already did the headlights and fog lights just like you did they work great
@Hoonmaro3 жыл бұрын
I had this idea but I had no idea how to execute without it looking like shit so huge thanks man! Just stumbled across your channel and found this
@Devon_Lewis3 жыл бұрын
Appreciate it man! Ya I made my first one when I was 15 lol
@Gixxer22475 жыл бұрын
Thanks for sharing, Devon!
@suaveridez5953 жыл бұрын
I subbed man n got that bell going but love if could give info on how u sell them I got a 93 camaro
@Devon_Lewis3 жыл бұрын
I no longer sell them! Just make videos to help people out
@bobd99112 жыл бұрын
great video... I cut my letters out the hard way with a dremel.... I still have not finish mine. its only been 3 yrs lol.. but going to get back on it and was looking to see if there was any new led opt.,, and ran across this
@daryllmroberts79583 жыл бұрын
cant figure out why you wouldnt put a towel,,or a anything down before setting panel down,,setting on rocks???????
@Devon_Lewis3 жыл бұрын
Because this panel is junk I have about 30 of them. If I made one for a customer I usually set it in grass on a towel.
@shownuff4real36010 ай бұрын
Excellent
@aries84082 жыл бұрын
That's sick, I have to try this
@Gioandgoose Жыл бұрын
Nice!! Thanks 🙏
@bennysgarage39272 жыл бұрын
You snapped !
@Devon_Lewis2 жыл бұрын
What?
@skipmoretti7782 Жыл бұрын
Great video bro !
@ShannonLewis5 жыл бұрын
Were you able to get more 3M tape??
@Devon_Lewis5 жыл бұрын
Shannon Martin no lol
@markjackson43853 жыл бұрын
nail file would clean them up nice.
@ethanballard35153 жыл бұрын
Hey Devon I was interested in making these myself soon, but I have a question. What LED light bar did you use for the Camaro in the old video that change colors? And how did you wire them? I've been searching for hours trying to look for the right stuff but need some help. Thanks.
@Devon_Lewis2 жыл бұрын
Just seen this but look up “nightrider LED” on eBay it’s like $20 comes with a little remote and stuff and just wire it to the battery with a inline fuse
@TheMadawg672 жыл бұрын
liked and subbed ty
@jerzee-bullie-da-collector509210 ай бұрын
Hey what’s your info for eBay to get these tail lights
@rgeller562 жыл бұрын
Devin I want to put LED headlights bulbs in what do you suggest what brand
@KingStudio6453 жыл бұрын
Dude you are hella smart
@Devon_Lewis3 жыл бұрын
I wouldn’t say smart 😂 I just get bored and find things to make cool
@KingStudio6453 жыл бұрын
@@Devon_Lewis I dig it
@chrispeak3613 Жыл бұрын
Where did you get the light plz
@gamingempireofficial5780 Жыл бұрын
What did you use to make the bar turn red and flash when you hit the brakes on the video about 3 years before this one
@Devon_Lewis Жыл бұрын
Look up on eBay “knightrider 22 inch led bar” I believe it was 22 inch.
@kennethmurphy61094 жыл бұрын
Hey do u still sell the Berger panels
@Devon_Lewis4 жыл бұрын
Kenneth Murphy I don’t sell parts to people anymore just make how to videos lol
@kennethmurphy61094 жыл бұрын
@@Devon_Lewis ok thanks I will watch the vids,I just brought a 1997 F body camero
@ThatNoFbody-ch9ky2 жыл бұрын
Damn bro I really wish u would make these for sale at least for custom orders or something I want one so bad for my Z 😭
@Devon_Lewis2 жыл бұрын
That’s why I made this video lol to show people how to make them!
@YungNate224 жыл бұрын
What’s the grit for the flap disc?
@Devon_Lewis4 жыл бұрын
Nate mitchell don’t really know just got one from harbor freight lol. Sure any of them will work
@rgeller562 жыл бұрын
I got 120 grit
@almeslat5 жыл бұрын
👍🏼❤️
@Cheeseburgerperson1415 жыл бұрын
Would this be similar for trans am?
@Devon_Lewis5 жыл бұрын
Dave Rodriguez the Trans Ams bumper is like a rubber it’ll melt if you do it this way.
@Affordabuilt5 жыл бұрын
What do you secure the light to?
@Devon_Lewis5 жыл бұрын
George Wink kzbin.info/www/bejne/a2HNopyXi5yhlck video on how to install the led
@me_mike6597 Жыл бұрын
I know you taught us how to make them but I don’t have the tool or time is there anyone that can make me one?
@Devon_Lewis Жыл бұрын
All you need is tape, spray paint/plasti dip and a razor lol. Takes like an hour to do! You can get everything at Walmart.
@me_mike6597 Жыл бұрын
@@Devon_Lewisthank you!
@rgeller562 жыл бұрын
Hay bro what grit flap weel I'm at harbor freight
@Devon_Lewis2 жыл бұрын
40 grit will work!
@rgeller562 жыл бұрын
I got 120 just to be safe I can always go and get that 40 only three bucks for the wheel
@Devon_Lewis2 жыл бұрын
@@rgeller56 that will work it don’t really matter tbh!
@loganh6623 жыл бұрын
Link to led strip?
@Devon_Lewis3 жыл бұрын
I left a link you’ll have to email them and get a custom length made! Think it’s 22 inch
@bitchard2153 жыл бұрын
o hellna im not using that 2 side tape shit
@ThatNoFbody-ch9ky2 жыл бұрын
U weren’t gonna put the work in to do it regardless lol
@alanvazquez83925 жыл бұрын
Man I bought this when you still used glue and couldn’t control it from your phone lol
@Devon_Lewis5 жыл бұрын
Alan Vazquez lol long time ago
@christophergreen7286 Жыл бұрын
Quick ? Can u make a 3.8 fast I know u going to laugh I just got a 1998 Camaro
@Devon_Lewis Жыл бұрын
You can make anything fast with enough money 💪
@smbaker845 жыл бұрын
Could you not dremel out the letters form the outside ? Make bad edges?
@Devon_Lewis5 жыл бұрын
stephen baker you can but the edges will be terrible unless you have a insane steady hand. Also with a grinder it takes about 30 mins to cut the first panel I ever done was with a dremel and took about 2 hours to do.
@smbaker845 жыл бұрын
Cool I kinda thought the edges would be hard to keep clean and maybe your method left them painted where Dremel w ouldnt. Thanks for info..i will be doing this soon..just got my 4th gen not long ago..was on my list to buy one...awesome for the info..
@llcoolj37783 жыл бұрын
I got fiberglass all over my face...and eyes, mouth, tongue, stomach, lungs, bloodstream, kidneys....