DeWalt Combi Drill review - DCD778

  Рет қаралды 31,054

Gosforth Handyman

Gosforth Handyman

Күн бұрын

This is a review of the DeWalt DCD772 combi drill. Am I switching from Makita to DeWalt? And what do DeWalt model numbers mean?
Help me make more sponsor-free videos - join at:
members.gosfor...
Don't forget to follow on X / Twitter:
x.com/gosforth...
Join the Gosforth Handyman mailing list:
gosforthhandym...
Not bothered about extra stuff? Support the channel via Patreon:
/ gosforthhandyman
Official merch including Gosforth Handyman tape measure:
gosforthhandym...
TOOLS & PRODUCTS I USE: gosforthhandym...
INSTA: / gosforthhandyman
CORRECTIONS: gosforthhandym...
All content on this channel is exclusively owned by MacLellan Creative Limited. Copyright (c) 2023. All rights reserved.
#diy #construction #powertools

Пікірлер: 203
@TheKurtgerber
@TheKurtgerber 11 ай бұрын
Great review, thank you. I have the De Walt Impact driver and it has changed my life. FYI - I just ordered an 8m metric tape measure, I can’t wait to try it out!
@robthewaywardwoodworker9956
@robthewaywardwoodworker9956 10 ай бұрын
I started my cordless journey with the really old 12V drill and then a few years later with the 18V Dewalt 5 piece combo kit when I did an addition to a house many years ago. I had been using corded tools on the jobsite for a couple of decades before that. Once those started to fail I moved up to the 20V Dewalt units and it's been a great change. The 20V batteries have lasted without fail for almost 8 years; the 18V batteries started failing within a couple of years. Really like my Dewalts, you will too.I just bought the 20V Pruner, I think its the DCPR320B, and you would likely love that in your back garden! My shop is very "black and yellow" what with the Dewalt, Stanley, Stabila, etc. I just built new shelves in the garage and decided to go all in and paint them black and yellow. LOL Cheers, Andy!
@alexandercarder2281
@alexandercarder2281 4 күн бұрын
Hello there, I just purchased mine 3 days ago from B&Q for just £120. It’s on offer here in Great Yarmouth cut down from £150 to £120. Love it. Mine is M1T model and only came with 1 battery.
@raydriver7300
@raydriver7300 11 ай бұрын
Hi again Andy. A few years ago a friend of mine turned up with a DeWalt screw driver and I was so impressed I bought a case containing a DeWalt DCK296 MS drill and a DCF 815 driver with two 18v and two 10.8v batteries. Having left them in France I bought a DCD 795 drill and a DCF 886 driver. Having been reunited with my first case I now use all of them; the 10.8 drill for light work and the 18v for driving screws through sleepers. Great kit. Keep keeping up the good work 🌞
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Great stuff - sounds like a nice collection Ray! 👍😎
@georgeprout42
@georgeprout42 11 ай бұрын
Model numbers really frustrate me, Currys are the worst. They promise to price match, but will claim ABC123-CURRYS, ABC123-JOHNLEWIS and ABC123-WHOEVER are completely different models. So they will price match, but only with themselves and the public get scammed into thinking they have a bargain with that price promise!
@v88krb
@v88krb 11 ай бұрын
Andy, I'm a senior and just dabble in DIY these days but my battery combi came from Screwfix many years ago. I followed the recommendation of the guy at the counter. He asked about my expectations and likely usage and sold me a model for, I believe, £100. It has been excellent, well behaved, does what I need, 2 batteries and it was definitely £100 very well spent.
@mcdon2401
@mcdon2401 10 ай бұрын
I bought the 776 as a combo with the 885 impact driver a few years back, and they've been bombproof for all my diy projects. Have also built up a small collection of Aldi and Lidl stuff for things I need less often, mostly saws. Decent quality for not a load of cash.
@AdamJee923
@AdamJee923 4 ай бұрын
Great video, just bought this myself from B&Q as my handed down Parker drill battery was fizzing and blew smoke lol 😆 I watched many videos, browsed the toolstation catalogue, looked around the Web understanding the different types of drills, powers, sizes etc and B&Q had this on the shelf. Already seems way more solid and wanted a DIY drill with teeth that will last me and my partner for a long time in our new home 🏡 👍
@Yahatacooky
@Yahatacooky 11 ай бұрын
Hi Andy, Thanks for the subliminal reminder that Christmas will be with us soon! Great vid by the way.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
My sparkly lights? Ha ha - nowhere near ready! 😂
@seanoreilly6551
@seanoreilly6551 11 ай бұрын
Got 2 of them years ago and were well used when i got them. Still going strong. Hammer action isn't great so got and SDS for that. Torque is great for IKEA stuff! Sometimes connectors rust out so maybe open the handle in the Makita one. The makita multi tool is a beast IMO.
@tlangdon12
@tlangdon12 11 ай бұрын
I deliberately chose the non-hammer version of this drill to preserve its life. I’ve got a corded Bosch SDS drill and not having any hammer action on my cordless drill makes sure I use the SDS anytime I need a hammer action.
@stevebosun7410
@stevebosun7410 11 ай бұрын
Hi Andy, great review as always. That old dilemma, "tools you need" vs "tools you want".
@iaingovan85
@iaingovan85 11 ай бұрын
Great content as always. I’ve had a dcd778 for a few years and it’s done everything I’ve asked of it. Interestingly the front chuck housing on mine is fluted plastic, not metal as yours is - they must have changed the manufacturing run at some point. Keep teaching us 👍
@davewright9312
@davewright9312 11 ай бұрын
I have several DeWalt drills and the one with the metal chuck is actually more difficult to tighten as it's a bit slippery....got one recently from b and q complete with battery and charger for £60..they had three on sale..I would have had all 3 but a bloke behind me wanted one.😁 Admittedly the battery was only a 2ah but I just chucked that on my torch
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
That's interesting about having a different chuck!
@White_Rose_Al
@White_Rose_Al 10 ай бұрын
Exactly that, for me, the metal one was a step backwards,I actually returned one due to the poor tightening grip. The plastic version for me, is far better
@theripper121
@theripper121 10 ай бұрын
My Dcd778 from the States also does not have a metal chuck but a plastic one....Strange stuff
@hardlyb
@hardlyb 10 ай бұрын
I have quite a few 12v and 18v Makita tools, several 12v Milwaukee, some 18v and 40v Ryobia, and the old 14.4v Dewalt (for some tools I rarely use, but am not ready to get rid of). I think buying the tool you need based on total price is probably the best choice, as no platform has everything and all the major brands seem about the same. I love my Makita stuff, but I started on Ryobi just for the hot glue gun (which is the best glue gun I've ever used), and now have a variety of odd tools in the brand, all of which I like. For 12v Milwaukee, I wanted tools for Pex-A and a lantern, but I also have a heated jacket, electric screwdriver, and a few other things, and I love them all (except the little underpowered cutoff tool). I got my dad a Dewalt kit a while back, and he is thrilled with the tools, so I think I could have gone that way as easily, and been just as satisfied. I have three different Makita drills, and the mid-size hammer drill is plenty powerful, while the big one can rip itself out of your grip if you don't put the extra handle on it. I will say I have a Makita variable impact driver which has plenty of settings, and while it's not as powerful as some, it's never failed to drive anything I wanted it to, and with the lower settings I no longer drive screws though things.
@headleshydra
@headleshydra 7 ай бұрын
I have lots of Dewalt, Makita, Milwaukee, and Bosch tools. I also have a parkside Plunge saw and Wired SDS hammer drill(bought mainly to use as a breaker) - The Parkside tools have been great! No complaints at all. The Parkside as a breaker has saved me a few times! Couldn't really ask for more from either(The one negative of the Parkside plunge saw is that it doesn't come with enough track to cut a full length of board, which is basically it's purpose)
@scalewarmachines
@scalewarmachines 11 ай бұрын
I go for Dewalt and Ryobi as my two platforms for cordless tools and my choice is based on budget thinking and price points, if I need a tool but can’t justify a Dewalt, I go Ryobi and they often do deals via their mailing list. I mostly tend to go yellow. Also, the platforms are somewhat interchangeable via an adapter (Dewalt batteries to Ryobi tools). I’ve never ever been disappointed with Dewalt, Ryobi has some great tools but they are a bit hit and miss and some are poor. I’m also not a pro so they don’t get constant use day in day out. Red always seems at a marginally higher price point, so I stick to Dewalt and have been happy so far.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
👍👍
@vaalrus
@vaalrus 11 ай бұрын
I’ve had good luck repairing a few “smoked” blue tools, with a simple brush and/or brush holder replacement. I don’t know about in the UK, but in Canada, parts are pretty easily available and inexpensive, even if the batteries themselves are extortionately priced. I’ve a pair of (heavily abused) combi drills waiting for parts, that will need about $100CAD to fix the pair. There was a window when buying a drill+impact combo, you could get two tools and a charger for about the cost of the batteries, so I have an embarrassment of choice when picking up an impact. Now, just a 3Ah battery starts around $120CAD, unless you can spot a sale.
@chrisjones5192
@chrisjones5192 11 ай бұрын
I use both blue which I bought & yellow which are provided by work. My blue impact driver is great I think, but the combi drill I find is a glorified screw driver not much more use than that. However the yellow combi drill I do find is much better than the blue.
@johnrutherford4042
@johnrutherford4042 23 күн бұрын
Hi I got the combi drill and the impact driver 2 x4ah batterys and charger for £149.99 that's a bargain, good video by the way keep up the good work
@m0aze611
@m0aze611 11 ай бұрын
My original combination and impact drill were Makita but were more suited for DIY. When I needed something above that level my cousin had Dewalt and s we were working in my son’s salon I purchases Dewalt. Very pleased and over the years have bought body only cordless tools and have quite an extensive range. Combi drill gave out smoke and was replaced with the same model you have. Can’t complain at all about reliability or durability as they really have had a lot of use and continue to do so. Purchased additional batteries when I find an offer.
@frederickwood9116
@frederickwood9116 11 ай бұрын
Thanks for sharing. Re SDS. I am impressed with the Evolution unit. It’s so light and yet goes through anything like butter with apparently no hand vibration. You might have more experience so be able to criticise it more.
@Marcus1954s
@Marcus1954s 10 ай бұрын
I had the 778 for 4 years and it was an excellent medium sized lighter household DIY drill, handy for around the house; though chuck had to be replaced for a decent Rohm. Problem was when I worked it hard as a pro-tool, as shortly after it started smoking and then the clutch went. I know someone who bought the drill with 2ah batteries and regretted it, as they just didn't last. If I just needed one drill for occasional jobs around the house then I would buy it again.
@TonyLeach-airguntech
@TonyLeach-airguntech 11 ай бұрын
The 778 is always being discounted, I have one , I bought it for the 2x 5Ah batteries and charger it came with...it's not bad. If you really want a nice drill, try the DCD 805, some nice deals around tool only and it will drop right in the case the 778 comes with and just move the 778 body on. The 805 is quite the beast compared while being actually shorter in length.
@_vladas
@_vladas 10 ай бұрын
Hey Tony, Thank you for your advice. Just ordered one from Toolstation with £10 voucher comes at £129.98 Cant be any happier! 🙌💪🏼
@whomadethatsaltysoup
@whomadethatsaltysoup 11 ай бұрын
Interesting review. My first cordless tool was the 9.6 Makita drill/driver. I purchased it on a trip to the States way back when. Since then, I've owned tools from whichever brand had the best tool at a decent price. Of course, when pretty much everything was corded, it didn't really matter what colour they were - only that they worked well and fitted into your budget. At one point, I owned mainly Hitachi cordless tools. The price/performance balance was good, and working onsite, they were less likely to go walkies than the more popular brands. Since then, I've purchased cordless tools from Makita, Ryobi, Bosch, and, yes, even Lidl and Aldi. Okay, the Aldi and Lidl tools probably wouldn't last long on a building site, but when you see a cordless grinder and a multitool for under a tenner - on a special - well, it would be rude not too.
@barryford7135
@barryford7135 10 ай бұрын
Andy you can get adapters from one platform from another.! Which is handy. 👍
@ianfinch1522
@ianfinch1522 11 ай бұрын
I’ve had makita for years and moved over to dewalt for newer purchases and extremely satisfied. I gone through two makita drills ( smoked on anything tough) the angle grinder would overheat and switch off. A multi tool great for a year or so the packed up. All replaced with dewalt and going strong working hard every day. Love the impact driver and multi tool ( lever blade change fantastic) oh and dewalt reciprocating saw a beast. Makita jigsaw has been great as has 36v mitre saw. Festool plunge saw amazing ( will replace with cordless at some point. Cordless really has moved forward making main’s powered outdated.
@andyc972
@andyc972 11 ай бұрын
Thanks Andy, interesting to hear your views on this, trying to pick a range of tools on a single platform is a nightmare and you never know what's coming down the line, so you sort of just have to do a little research and get on with it and hope for the best ! I too am on multiple platforms and even within brand and range like the Bosch 12v ( was 10.8v ) there are different chargers for the larger capacity batteries. I really like this compact range but it is still fairly limited and some of the devices are really pricey compared to competitors. It gets even more confusing when you add garden tools into the mix !
@dbat3291
@dbat3291 10 ай бұрын
I like the idea of having battery adapters for different makes. Or even a battery pack round the shoulder and an adapter cord to the tool so it'll be lighter too. A sort of corded cordless!!!!!
@tonysutch2053
@tonysutch2053 11 ай бұрын
Bought my first Dewalt combi 15 years ago and it's still going strong. I've tried both Aldi and Lidl battery tools but they have never performed well for me. You get what you pay for most of the time. Old adage but true!
@leewalerzak
@leewalerzak 10 ай бұрын
Iv has the same drill and impact driver equivalent for about 7 years now they've took a beating and used daily and still going
@quirkygreece
@quirkygreece 11 ай бұрын
I have four different battery platforms for different tool makes, but as 95% of my work is done in the workshop it just means I give up a little extra space in the corner of the shop. My motto is always to get the best tool for the job that you can afford - different batteries or not. Most of my battery tools are DeWalt, but I also use Bosch plus a couple of Parkside (Lidl) tools and a couple of Budget tools with their own rechargeable batteries. On a side note I originally bought a Budget (brand) drill for about €10about five years ago just to get me out of a jam, it obviously doesn’t have all the features or the power of a more well-known branded tool, but the battery lasts forever and I use it every day for light work - it’s possibly the best €10 I’ve ever spent on a tool and since then I’ve added a few others simply because they are so cheap that they are almost disposable, although they are all plodding on and all get used regularly!
@bobuilt10
@bobuilt10 10 ай бұрын
I swapped to team yellow a few years ago and have found the DCB118 rapid charger reduces the number of batteries you need. It's a fan cooled unit and charges from blinky light to full in around 15mins. I'm not a fan of leaving lithium batteries unattended when charging so the speed of this charger allows me to charge one battery whilst I'm using the second.
@wezist
@wezist 11 ай бұрын
I have been in the engineering trade for over 25 years and used every brand of cordless tools in anger... With my own money I buy Yellow....... Had to use the warranty a few times and it was hassle free and very fast....
@paulprescott7913
@paulprescott7913 11 ай бұрын
Im perfectly happy with my Makita 18v tools. Though in fairness they dont see the useage that yours perhaps have had. Have even got a hedge trimmer and strimmer for the garden. The best one i have is a recep saw though. Personally i would just replace like for like. But thats just me. Great vid Andy.
@animal79thecat
@animal79thecat 10 ай бұрын
These 778s are famous for the notorious chuck wobble
@kendom33
@kendom33 11 ай бұрын
Hi Andy. I've got all blue, however my son bought yellow and sadly I have to say it is much better balanced than the blue one plus it has a light
@xxDADDYDAYCARExx
@xxDADDYDAYCARExx 10 ай бұрын
There are black & gold limited edition makita s I was told the black and white was more DIY level just like the green Bosch’s whereas the blue Bosch like makita are more PRO level.
@Rolandpgbrooks
@Rolandpgbrooks 10 ай бұрын
I'm in the middle of a large renovation / extension. I've gone almost entirely Makita purely for battery compatability. but my wired tools are based on the amount of use it will get. I bough a Titan concrete breaker 20 years ago, it was cheap (about the sane as a days hire ) has seen quite a bit of hard work but still going very strong. I was interested about what you said about Evolution and can support their customer service as second to none. to the extent that if I was buying a battery drill etc. I would have a really good look at those too.
@steve_wins83
@steve_wins83 11 ай бұрын
I bought the DeWalt drill/impact driver set with 2x4ah batteries for £200 and they’re spot on but only had light use. Getting the 2 batteries i then bought the Jigsaw bare tool and its compact and powerful but a lot of the effectiveness is in the blades as with most saws. I’ve been on site with it a week fitting and its not skipped a beat.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Nice one - could do with the jigsaw!
@MK-yo4jn
@MK-yo4jn 11 ай бұрын
Thanks Andy. I needed a new drill. Soo will be buying this. I also need an impact and SDS drill as well as multi tool. So waiting for your video to tell me what to buy 😂. You should get some commission for this
@stephencave187
@stephencave187 11 ай бұрын
After years of aldi and own brand tools i decided to treat myself and have several Dewalt 18v tools now. (Even tho the bulk of my renovation days are over). Great tools and the lithium batteries are amazing. Charging time i think depends on the charger model number. I have a 113 and a couple of 115's and they have different output currents.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Great tools! 👍
@freetolook3727
@freetolook3727 11 ай бұрын
Btw, there are battery converters out there so you can still use your existing batteries on a new tool line. The trade off is they can be cumbersome and weighty. So, if you're a pro, then that extra weight will weigh on you by the end of the day. That's the reason why they make aluminum pipe wrenches!
@llljustcallhimdave
@llljustcallhimdave 11 ай бұрын
I got the same kit as you Andy a few years back, now have load of yellow stuff because of the batteries. Also got the 5ah set at the beginning of the year just to get the 2x5ah batteries as it was cheaper than buying just the batteries. Edit to add the dewalt impact driver will probably be half price at ScrewFix during black Friday, has been the past few years
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
There can be some great combo deals including the batteries!
@szeroki77
@szeroki77 11 ай бұрын
Hi I don't know if anyone mention but I think you are missing belt hook and magnetic bit holder on the side of that DeWalt. You can get them on the auction site I don't use the hook that much so I got magnetic bit holder on both sides of the drill otherwise its a good drill. Thanks and I'm looking forward to next review.
@multirevelator
@multirevelator 11 ай бұрын
great vid, would also recommend a newbie to get a lighter duty drill (10.8/12v etc) if they see one at a good price as they are easier on the wrist, smaller and will do alot of day to day jobs
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Good tip!
@Bigroomboy
@Bigroomboy 11 ай бұрын
That Makita drill is the cheapest home gamer option. Not a fair comparison but the DeWalt looks like a decent drill. I also had that same impact and recently upgraded to the top end Makita. Night and day, by far the most used option is the lowest power mode! Oh also to add Makita charge faster but you need to have the rapid charger.
@bread-gz3rl
@bread-gz3rl 11 ай бұрын
That dewalt is also the cheap shitty one
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Both are budget pro / semi-pro but defo not 'home gamer' options and both are around the same price! 👍
@manceconomist
@manceconomist 11 ай бұрын
Both firms make decent tools at a range if prices and levels. Having batteries for both is ideal if not lugging around all day. Can then pick and choose the best tools from each brand. The 887 is the impact driver to go for. They have a cheaper one, but the 887 has three torque settings, so it can be used on fairly delicate screws as well. My 725 is also still going strong after 14 years of DIY use.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
887 - noted - cheers!
@jessefurqueron5555
@jessefurqueron5555 11 ай бұрын
Natural progression for me…Yellow (Dewalt) to Blue (Bosch)..then Yellow+Blue = Green (Festool). Still have about 8 or so 1617EVSs. Stationary tools went Grey(old Delta not the new stuff eg 2003+) now tan (Some Jet) & mostly Gold (PM) except 1 Yellow (Dewalt planer w Byrd head). Colors are fun!
@MKRM27
@MKRM27 11 ай бұрын
Kidding yourself if you thought Bosch was progress.
@jessefurqueron5555
@jessefurqueron5555 11 ай бұрын
@@MKRM27 Not at all. Though will say, never did care for B’s sanders, they sit in a cabinet unused. The 1617s, 12v & 18v drivers & impacts yep those were a step up over Dewalt of the time and team Blue is (knock on wood) still going strong after many years of use/abuse in the shop and on job sites. Will say, for the house…not the biz shop, did recently purchase a Dewalt 20v pole trimmer & 20v work light theyre “ok”. I was in a pinch & needed the trimmer and it was the only one in stock locally. It’s starting to show its “weaknesses” after less than a year. Same w work light, light won’t stay in position (rachet mechanism) and no way to adjust. I like it, but wouldn’t buy again. Bosch, stopped buying, other than 1617s. As I get older, don’t like changing bits/setups. For what they do, hard to justify a ton of Green’s routers over the 1617s. We do have a couple of 1010s and a 1400 in the shop and like them a lot. But 1617s, are the “workhorses” in the shop. Best Dewalt tool we’ve had experience w is the DW735 (w add on Byrd), IMHO, best tool D ever made. But still, for us, Yellow->Blue->Green. Only regret w team Green is not jumping on the bandwagon sooner, but…don’t care for their drills. Buddy of mine has several of em, and personal pref I just haven’t gotten to like’em so far. Mother couple of years if I’m still kicking, may change my mind. Now if you wanta talk about biggest disappointment over the decades (ok, let’s leave Porter Cable/Delta off the list), Hitachi. First tool from them was a PR12. Best (non-Helical) portable planer we ever used, bar non. Got into their hand power tool line. The love didn’t last long. They went downhill fast. Not a single Hitachi tool left in the shop nor the house, they just broke or wore out w no replacement parts etc. Same thing happened w their hard drives after they were sold off. Mind you, I used to work for Hitachi (telecomm) and I stopped buying their products even when I worked for them. At this point in our shop I’m very comfortable w a color-mix. Try to pick the best tool in each category for us and our use cases. So Bosch and Festool for hand power tools, some Woodpecker red (love those Paolini’s &their stainless bladed tools), lots of Jessem. Stationary & misc: Some ooollldd Delta, some Jet (their cast iron rusts faster than any other brand), lots of PMatic, Oneida Vortex components, Cal Air tools (several from 1gal upto 60gal), PCable nailers, Castle, Massca (threw out Kreg), Bessey, Wilton, Lie Nielsen, Veritas, Mirka, Fisch, Pfeil, Mitutoyo calipers/mics/h & d Gauges, Haas, Mitsu-Trane, Noga, Orange, Hardinge, Harvey, Whiteside, Amana, Tekton, Gearwrench, Wera, some Wiha, Vessel, Goodyear air hoses, Prusa, Iwata, Harder & Steinbeck,etc etc. Those are some of brands who have a tool or category of tools that we’ve found work for us, not on a “for months” basis, but for “many years” basis. All those listed I would not hesitate to repurchase the same type of tool/tooling from and would also be willing to try other categories or types of tool/tooling from. Delivery guy’s here, new Epilog (Team Blue-White) just showed up, gotta run. So pardon any misspellings etc. Have a good’un and enjoy whatcha do! As always, YMMV. Just sharing. Nothing more. Nothing less. Not associated w any mfgs mentioned other than as a paying customer. Exception as noted above - Hitachi.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
👍👍
@SentinelSays
@SentinelSays 3 ай бұрын
In all honesty, I’ve been all in with Makita for a good decade or so, but I’m starting to move away from them. The main reason is because a lot of the new tools are just not lasting. I had a blue SDS which was absolutely bombproof but my apprentice accidentally dropped it off a ladder, it happens. I replaced it with a near top of the range blue SDS drill and within 3 months it needed a warranty repair. It came back and the clutch went about 2 weeks later. Sent back and came back completely inoperable. Had issues with a fairly new impact driver too where it just keeps refusing to turn unless you shake it vigorously beforehand! I’m a professional and I need my tools to just work; true things do break and go wrong, but if I’m sending of a tool every few weeks because something has gone pop, it’s not really viable to keep doing so. Now I’m being slightly more diverse with it. Continuing to use my Makita tools that are still working, as they give up are being replaced with DeWalt and Milwaukee. As a lot of my batteries are due for replacement soon anyway, it seems like good timing.
@dwalsh3469
@dwalsh3469 10 ай бұрын
It’s £149.99 with 2 5Ah batteries today. The makita equivalent (not sure of the exact drill spec) is £179.99 with 2Ah batteries. The Milwaukee offer is, I think the same price as the makita but with 2 4Ah batteries.
@dwalsh3469
@dwalsh3469 10 ай бұрын
In Screwdix
@FaBs227
@FaBs227 11 ай бұрын
The Makita DHP453 you did have is better suited to a DIY user, to be fair I’m surprised it lasted you so long. The Makita that you need would be the DHP481/DHP486 these are much more powerful and better suited to your working needs. Black and white Makita tools are limited edition aka legacy edition tools.
@shaun30-3-mg9zs
@shaun30-3-mg9zs 11 ай бұрын
Hi Andy, as always a good honest review, I only have one battery drill (Black and Decker) it is a good one and very handy for working outside, but being in the workshop I use main's powered tools I have 20 double sockets on a ring main, all around me they are spaced out every metre so no trailing flexes or extension lead's. My be one day I might buy some battery tools. Great video, take care👍
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Cheers! 👍👍
@inflamable1977
@inflamable1977 11 ай бұрын
Gosforth AVE?? Take it apart Andy. Good vid, interesting seeing that pricing structure.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Ha ha - tempting! 😂
@shamuso1596
@shamuso1596 11 ай бұрын
I have everything from bosh to festool, I have a few makita tools ( nibbler, biscuit jointer and planner ) we used to run makita drills but found them really easy to break. A slight fall/ drop and they break in half. The drills are fragile. Dewalt are OK but prefer milwakee now.
@dougsaunders8109
@dougsaunders8109 11 ай бұрын
Wow Andy changing from one colour to another…… plus annoying the red army all in one video! 😂 I have stuck to one battery platform to make sure I don’t find my self short of magic pixies the make them go. Happens to be yellow and black. Corded stuff I buy best for the job including Bosch and Festool I have the 996 battery combi, very powerful but torque settings are rubbish on the lower end they don’t cut in soon enough. Try FFX for your tools next day delivery when ordered up to six night before, good price excellent service. No sponsored just happy impressed customer server all times over. Good luck with the shouty comments on this one 😂
@davewright9312
@davewright9312 11 ай бұрын
It is quite funny that some folk think that the tools they buy are the best and are better than any other brand and get quite defensive about it...at the end of the day I mainly stick with one brand due to interchangeable batteries and my tools have to work hard and help me earn money so need to be reliable...with good easy warranty if required... There is little to no difference with site tools between the brands..
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Only reason I use Screwfix is since I'm impatient and can collect it straight away. 👍😂
@ch1proy60
@ch1proy60 11 ай бұрын
I go for dewalt and ryobi but I only use dewalt batteries I have 3or4 badaptors and they work just fine for me. Whatever tool I want to use I always hav a battery avilable.
@chrisgavin342
@chrisgavin342 11 ай бұрын
Hi mate, only subbed to you a few weeks ago so I'm a newbie to your channel. Not sure if you and your subscribers are aware, but if you manually tighten the chuck with your hands, then turn it back one click it locks the chuck. I have found this to be most effective whilst using hole saws as they can tend to come loose and release the arbour. Just a quick tip 🙂👍
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Welcome on board! Good tip!
@ianpearse4480
@ianpearse4480 11 ай бұрын
Evolution, well done. Interesting.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Yup - really impressed!
@ianmcbain898
@ianmcbain898 11 ай бұрын
Hi Andy I agree a good combi drill will last you a very long time. I have a Makita DHP 458 which is not brushless but it easily handles all my needs and best of all the chuck runs true with no wobble at all. A little heavy but it's bombproof lol. The 453 model you had was not the budget one but the entry level of the LXT range. The budget range is actually the G series which has different style battery so not compatible with LXT. Your new Dewalt looks decent and the chuck looks true which is not always the case with Dewalt. I'm not a professional but a reasonably advanced DIYer. Good video mate keep them coming.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Cheers - good info!
@ianmcbain898
@ianmcbain898 11 ай бұрын
@GosforthHandyman You are welcome. Also forgot to mention if you go for a dewalt impact check out the chuck first. A lot of play and wobble. I got a DCF 887 which to be fair was a good powerful machine but the wobble let it down. I returned it and later got the Makita DTD 154 which has 3 modes and plenty power and chuck is much better and fairly true and will tackle a wide variety of needs. Best of luck whatever you pick Andy 👍
@edwardcowan6346
@edwardcowan6346 11 ай бұрын
Some older batteries don't have charge indication on them.
@davidhull2060
@davidhull2060 11 ай бұрын
When it comes to batteries, I've got more platforms than St. Pancras. I started out with Dewalt, and now I've got just about every colour under the sun except the Hikoki 36 volt. I promised myself that enough is enough, no more .....and then the blighters come out with a 36 volt 1/2 inch router!
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
"more platforms than St. Pancras" 🤣🤣 I'm stealing that. 👍👍😎
@bamaprepper
@bamaprepper 11 ай бұрын
good video
@ottofumbler7267
@ottofumbler7267 11 ай бұрын
I spent the past couple of years adding to my power tools, and was doing okay for a while buying body only (naked) models. It got to a point where I was in need of more and bigger batteries. Then I saw the SF deal with 2x 5Ah batts for £150. Considering the batts alone would have cost £100 a pair, for just £50 more I was getting a 2nd drill, case, and upgrade charger. No brainer. I did consider the replica batts at one time, but all the negative reviews seemed to suggest there are a lot of faulty DoA batts, and I couldn't be bothered with a returns process. I don't have any corded DeWalt tools, as they seem overpriced. Titan, Einhell, Parkside are all fine for plug-in work at a fraction of the cost. Parkside cordless tools are fine to begin with, but the batts brick themselves after just a couple of years. Bit of a false economy.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Yeah, I've had really bad experiences with replica batteries. I never buy batteries from Amazon now. Just don't know if they're fake. 👍
@michaelplays2449
@michaelplays2449 11 ай бұрын
Great video !!! thanks
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
No worries!
@stobbsy67
@stobbsy67 10 ай бұрын
I find that the Erbauer tools from screw fix are not that bad they are around about the same price as any other brand
@davideyres955
@davideyres955 11 ай бұрын
Black Friday is coming up so keep an eye out peeps. Also have a look the dewalt 54volt sds drill it goes through bricks like they arnt there. I’ve invested in 54volt batteries for the 54v and that works on the 18v tools too and basically doubles the runtime. The 54v reciprocating saw is great as well. Hacked through a 6inch tree stump and took it out with no stress at all. The 18v can also have adaptors so you can use dewalt batteries on makita and the other way round. It is the same company that owns dewalt and makita.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
The 54V must be a beast! 👍😮
@SteveAndAlexBuild
@SteveAndAlexBuild 11 ай бұрын
When you get the new rattler a nice bit of red would look nice . The Milwaukee 12v cordless tools are absolute pocket rockets and really compact . I’m not saying this because they are our amazing sponsor but because they really are that good . One of our regulars on our premieres every Monday and Thursday called Skaterguy is a very loyal teal power tool owner but does have some red 12v tools because they are so good and compact. A bit of red would go well on the bench 😉🟥⬛️🤙🏽🧱👍🏼
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Cheers Steve! Who knows, they might send me some 😉. Never tried red but heard many good things!
@TheKruizr
@TheKruizr 11 ай бұрын
I had Makita tools for years, now they're mostly DeWalt, they work great and I have a lot of batteries that fit all the tools, but one battery lasts for days in normal use.
@m0aze611
@m0aze611 11 ай бұрын
P.S. MY DEWALT SDS has been a complete workhorse.
@benriley324
@benriley324 11 ай бұрын
I’m still a makita guy but have found the chucks on Dewalt are generally more centred and have less run out than other makes. Bosch blue are the worst in my opinion
@MARTINA-gc3tq
@MARTINA-gc3tq 9 ай бұрын
Dewalt is just a Stanley/black and decker ?
@ricos1497
@ricos1497 11 ай бұрын
I have the cheaper version of the dewalt combi with the plastic chuck and it suffers from all the problems you mention the Makita has. It's not packed in though, and it's about 8 years old, although it has felt like it's on the verge of going South for about 7 of those years. I've not replaced it because I'm actually intrigued just how long it'll go on for.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Interesting! 👍
@preacher031163
@preacher031163 6 ай бұрын
I recently switched to HERCULES...these brushless tools r every bit as good as anyone elses...and bout half the price
@jackfretwell7280
@jackfretwell7280 10 ай бұрын
Have you seen that Screwfix have a DeWalt impact driver now on sale at £49.99? Might be worth getting to try?
@dbg2644
@dbg2644 10 ай бұрын
For me it does not make sense to change platforms due to the battery being proprietary
@sonycarp8271
@sonycarp8271 11 ай бұрын
Grab yourself a dcf887 bare tool, black friday is coming up, is an older tool but still good, 👍
@MrZimmaframe
@MrZimmaframe 6 ай бұрын
What is an “amper hour”? Do you mean amp hour?
@0skar9193
@0skar9193 11 ай бұрын
I'm invested in dewalt. Have multi 18v batteries so it makes sense for me to buy more tools from the range. And dewalt is good stuff, yes it has its flaws but any manufacturer has flaws.
@0skar9193
@0skar9193 11 ай бұрын
One thing I will add about this particular drill, it's useless for 1.5mm drill bits.
@RGEnduro
@RGEnduro 11 ай бұрын
I use dewalt so really have no issue with you bashing Makita but the theme seems to be that you don’t like Makitas cheaper ranges. Not really apples to apples with the two drills and the sds is the cheapest they do with multiple better options
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
My old Makita and new DeWalt are similar prices. 👍
@Pete.Ty1
@Pete.Ty1 11 ай бұрын
👍👍👍.Thank you
@edover50
@edover50 11 ай бұрын
Good for you buying what you want, the days of colour loyalty are gone with the use of cheap battery adapters. It’s all about what works best for you and your price point.
@keithprice5208
@keithprice5208 10 ай бұрын
Which angle grinder would you recommend for cutting down ULEZ cameras?
@parrot340
@parrot340 11 ай бұрын
Not got one but Yes what I have seen Dewalt impact drivers are the best!! they look so compact to. aldies Impact drivers are AMAZING!!! I have 2. got a spare for like £12. can not fault them. so AMAZING!!!
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
I need to give an Aldi one a try!
@parrot340
@parrot340 11 ай бұрын
@@GosforthHandyman Yep I screwed 2 4x2s together with 4" screws no pilot hole at all on any of the wood. drilled it no problem at all :)
@websurfer1585
@websurfer1585 11 ай бұрын
Iv never found cordless drills very good for drilling into brick walls, i find it hard going and always resort to my mains sds.
@davewright9312
@davewright9312 11 ай бұрын
Why go for mains ...get a cordless SDS..re brick walls it depends on the block work...if you are drilling into aerated block you certainly don't need a SDS..
@TheDoosh79
@TheDoosh79 11 ай бұрын
I've migrated away from a combi drill, for things hammer action I prefer to use the SDS as most of the time the hammer on a combi is pretty lame. So I've ended up with a drill driver and the SDS for when I need hammer. I used to use the torque settings on my old combi for screwdriving.
@dkspringer
@dkspringer 11 ай бұрын
It's a bit strange that these companies have so many combi models and have much less choice for drill drivers. If you need it, use an SDS. I'd rather have a lighter, less complicated drill driver.
@templar2058
@templar2058 11 ай бұрын
E❤
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
I mainly use the SDS for brick... or if I'm doing a lot of holes in concrete block etc.
@Lee2k4
@Lee2k4 11 ай бұрын
Milwaukee guy myself
@juyhfrty
@juyhfrty 11 ай бұрын
Really interesting your combi drill died, I have loads of Makita stuff over 12 years old, and the only item that has died is the same combi (in blue). Bought replacement last year, was drilling with a hole saw and smoke started pouring out of the back. So now I’m careful with it and nurse it a bit. Theres clearly a design or production issue with them.
@Whoop0
@Whoop0 11 ай бұрын
Real question is, if you care about cost why didn't you go for Ryobi?
@MKRM27
@MKRM27 11 ай бұрын
That’s your question, it’s not “the real” question.
@Whoop0
@Whoop0 11 ай бұрын
@@MKRM27 it’s a figure of speech, don’t read too much into it.
@bigutubefan2738
@bigutubefan2738 11 ай бұрын
Watch the video. Screwfix don't stock Ryobi, the last time I checked.
@bread-gz3rl
@bread-gz3rl 11 ай бұрын
They're junk, I have all ryobi and the batteries are garbage I'm going dewalt
@davewright9312
@davewright9312 11 ай бұрын
​@@bigutubefan2738bizarrely b and q do and they are the same company
@Indonesia01ian
@Indonesia01ian 5 ай бұрын
Hi is 2.0 Ah enough for home use?
@benriley324
@benriley324 11 ай бұрын
The white is no different to the blue of the model numbers are the same. You had the 453 combi drill which is the entry level one. The Dewalt you have now is more midrange so comparable to the makita DHP485 I think.
@Ed_Shaw
@Ed_Shaw 11 ай бұрын
Whatever happened to Black & Decker? 😂 A fave for DIYers in the seventies. Before your time, though, Andy Mac. 😊
@manceconomist
@manceconomist 11 ай бұрын
B&D own DeWalt. As far as I am aware they wanted to create a trade/premium brand because their own name and reputation had fallen. Had a cheap B&D impact driver. Needed a spare part and it was a DeWalt part.
@dkspringer
@dkspringer 11 ай бұрын
Same company now as Stanley I think. No B & D but watch out for the cheapest DeWalt if you're expecting professional grade tools.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
😎
@Ed_Shaw
@Ed_Shaw 11 ай бұрын
Whatever happened to Black & Decker? 😂 A fave for DIYers in the seventies.
@davewright9312
@davewright9312 11 ай бұрын
​@@christopher2001black and decker DeWalt and Stanley all the same company...I am seeing black and decker again at DIY centres
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Wish I still had some B&D stuff!! Sure there was a factory near here... 🤔
@matthewcalder4351
@matthewcalder4351 11 ай бұрын
I have makita but used dewalt and found dewalt just have more GRUNT! 👍
@freetolook3727
@freetolook3727 11 ай бұрын
Btw, battery chargers have no value outside of if you don't have one. A lot of combos are cheaper to buy if you need another battery, it's sometimes just as viable to buy a combo. Batteries are the highest expense of cordless tool sets. So, you end up with an extra drill and charger for the basement tool bench so you don't have to run back and forth to and from the garage with cordless tools! 😂
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
👍
@jcoul1sc
@jcoul1sc 11 ай бұрын
Think makita used to be white for home gamers but now available in all colours, especially the japanese versions
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Not sure! It's the same model number as a blue one - think you can still get it!
@jcoul1sc
@jcoul1sc 11 ай бұрын
@@GosforthHandyman push the boat out and get some of the Japanese Makita, there's a little circular saw that's very nice, lxt, very powerful and has all colours. But maybe 300 quid
@therichardhorton
@therichardhorton 11 ай бұрын
Dewalt also make an adapter for their older system to use the new batteries 🔋
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Nice one!
@jcoul1sc
@jcoul1sc 11 ай бұрын
Aldi and lidl dont always have the batteries in stock thats why I dont buy them.
@stephenhudson3496
@stephenhudson3496 10 ай бұрын
Like with apple usb charging its about time these manufacturers were forced to standardise battery connections for environmental reasons and to drive competition come on EU legislate
@GosforthHandyman
@GosforthHandyman 10 ай бұрын
It's coming! Check out www.powerforall-alliance.com/en/
@FLOSSYTREADWELL
@FLOSSYTREADWELL 10 ай бұрын
At last explanations of the letters for dunces like me :-)
@freetolook3727
@freetolook3727 11 ай бұрын
You buy into a system. If you're starting out buy the best combo deal of cordless tools possible in your price range that you'll use and then just get whatever else you need as you go along.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Defo!
@knightbeat
@knightbeat 11 ай бұрын
Do you also have Erbauer tools? Any comparisons or opinions? It's very affordable compared to the good brands like Makita and DeWalt. But I'm not sure how the experience differs.
@ricos1497
@ricos1497 11 ай бұрын
I've had a couple of erbauer tools. Both broke fairly quickly! The impact was good while it lasted, but that was about two renovation jobs. I've been happy enough with their drill bits.
@alexthomson7465
@alexthomson7465 11 ай бұрын
I have a set of erbauer - combi, jigsaw, orbital sander and multi tool and they are great. I bought a DeWalt combi this week and I have to say, other than extra torque I really prefer the erbauer. More comfy to hold, and even feels a bit smoother somehow. Erbauer is a great brand
@ricos1497
@ricos1497 11 ай бұрын
@@alexthomson7465 that's a good point about the erbauer, it was comfortable to use.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Had generally good experiences with Erbauer!
@freetolook3727
@freetolook3727 11 ай бұрын
A couple of decades ago, Makita was the go to tool of choice for contractors and pros. Now, the title has definitely been passed down to Milwaukee tools. Every test I've seen has Milwaukee coming out on top being top rated. It will change in the future, I'm sure. Btw, I bought my share of DeWalt over the years and been happy with them too.
@michaelregulski6496
@michaelregulski6496 11 ай бұрын
Drivel…
@mikeb1417
@mikeb1417 11 ай бұрын
Milwaukee Is all fur coat and no knickers its failure rate is ridiculous there's always parts going in them yet they have this reputation as being the porn star of the brands I was going to change over to Milwaukee but glad i didn't inside its cheap hollow rubbish from what iv been told tho Milwaukee used to be supreme quality power tools but like most things nowadays chines made crap gets added to everything.
@GosforthHandyman
@GosforthHandyman 11 ай бұрын
Never owned any red tools, yet!
When To Use an Impact Driver VS Drill: The ULTIMATE Guide
13:28
LRN2DIY
Рет қаралды 2,7 МЛН
Not Just Fake but Counterfeit Power Tools
17:09
Torque Test Channel
Рет қаралды 402 М.
Офицер, я всё объясню
01:00
История одного вокалиста
Рет қаралды 5 МЛН
Spongebob ate Michael Jackson 😱 #meme #spongebob #gmod
00:14
Mr. LoLo
Рет қаралды 10 МЛН
Why are Pozidriv screws better than Phillips?
11:07
Gosforth Handyman
Рет қаралды 158 М.
Cordless Drills: Is Buying Top Models Even Worth It These Days?
14:46
Torque Test Channel
Рет қаралды 159 М.
The DeWalt Toughsystem 2.0 DXL Organised THE BEST WAY!
42:09
Shadow Foam
Рет қаралды 61 М.
Cordless JIGSAW review - Evolution R90JGS
24:21
Gosforth Handyman
Рет қаралды 8 М.
DeWalt DCD 100 vs DCD 796: The Ultimate 18V Combi Showdown!
2:18
Dewalt's Insanely Complex Drill Lineup!
15:00
Tinker With Tools
Рет қаралды 77 М.
Are electric plate compactors any good? Evolution Hulk Electro!
15:42
Gosforth Handyman
Рет қаралды 32 М.
You will NEVER learn to Plaster until you can do this.
10:59
On The Trowel
Рет қаралды 1,1 МЛН
Swift Programming Tutorial for Beginners (Full Tutorial)
3:22:45
CodeWithChris
Рет қаралды 7 МЛН
Are more expensive drills really worth it?
25:15
DIY Montreal
Рет қаралды 448 М.