Dexter Axle Torflex Lift Kit Installation - 2018 Forest River Rockwood Mini Lite Travel Trailer

[@lepar119]

Does lifting your travel trailer increase roll over risk or compromise highway stability??

[@etrailer]

Generally speaking, anytime you change the trailer's suspension geometry by raising it, you run the risk of making the trailer more top heavy which can increase the risk of increased body roll and somewhat reduce stability. The greater you're raising the trailer height, the greater the risk. There are many variables involved, so it's not possible to say how tall is too tall, but if you're only raising by an inch or three, you shouldn't have a problem. www.etrailer.com/Trailer-Leaf-Spring-Suspension/Dexter/K71-707-02.html

[@jackwright580]

How do I find out what size /# for my 2020 Forest river Wildwood ?

[@etrailer]

This lift kit is designed for a # 10 Torflex torsion axle. If you send us a clear photo of the tag/sticker on your axle, we can determine which axle it's equipped with and find if there's a lift kit available for it. We'll look forward to hearing back from you! www.etrailer.com/Trailer-Leaf-Spring-Suspension/Dexter/K71-707-02.html

[@TristanSeamans-do8hz]

Do you loosen both sides of the axle or leave one side completley tight while working on the other side ?

[@etrailer]

You'll want both sides loose, but still connected. Then, remove the hardware on the side you're starting on. www.etrailer.com/Trailer-Leaf-Spring-Suspension/Dexter/K71-707-02.html

[@EverydayIsSaturday2]

Can use my floor jack under the dexter axel to lift my Lance travel trailer? Or is it better to jack the TT frame?

[@etrailer]

It is better to lift from the frame because the axle is not designed to be lifted on. www.etrailer.com/Accessories-and-Parts/Dexter-Axle/K71-707-02.html

[@joeb.8625]

I believe my RV has Lippert axles will i be to lift it like the video above?

[@etrailer]

This kit is compatible with #10 Torflex axles with 2,300 to 4,000-lb capacities. You can find this information by finding the part number on your axle. www.etrailer.com/Accessories-and-Parts/Dexter-Axle/K71-707-02.html

[@FrustratedFisher]

Thanks for the vid ,I would like to know wear do you find the part number for the axel IE # 9 10 11 or 12 Thank you

[@etrailer]

The axle number is usually stamped near the end of the axle or on a tag that is stuck to the axle. You may also be able to look up the axle information by looking up the year make and model of your trailer. www.etrailer.com/Accessories-and-Parts/Dexter-Axle/K71-707-02.html

[@allenkunihiro9081]

what size wire did you use for the brakes????

[@etrailer]

We used a 10 gauge brake wire in this installation. www.etrailer.com/Wiring/Deka/10-1-1.html www.etrailer.com/Trailer-Leaf-Spring-Suspension/Dexter-Axle/K71-707-02.html

[@michaellavinder1191]

After installing the lift kit, is it necessary to get a wheel alignment?

[@etrailer]

After installing this kit, you are not required to do an alignment. It is not a bad idea to check it while you're under the trailer. You just need to measure from the coupler on the trailer to the end of the axle and do this for both ends of each axle. This measurement should be the same distance. www.etrailer.com/Accessories-and-Parts/Dexter-Axle/K71-707-02.html www.etrailer.com/question-248359.html