DHCP Server Configuration Tutorial With Multiple Switches using CISCO Packet Tracer

[@Bigmax313]

This video was very informative. Thanks! 💞

[@mattbop]

Was troubleshooting for 1 hour, cound't find a solution. I just forgot to put the defalut gateway to the DHCP server. What a dumbass i am. Thank you for the help!

[@angel_010]

damn u just solved the issue i had for 3 hours

[@dariuslaurinavicius1455]

Your video is not working. First. How does the CLI know the "g0/0" parameter. It is not assigned anywhere. It tells me that such a parameter does not exist. Second. The second Switch only sees the Server but does not see the computers. I did everything step by step according to your video :)

[@rusaikmufthi3761]

Can you make a video by using a multilayer switch instead of a router in this video, and with those 2 switches, put another switch as the 3rd and enable all 3 as separate vlans with 1 DHCP server. please

[@CHRISRAYMOND98]

What does it mean when an ip overlaps

[@fish947]

same ip address is used on another device I guess

[@BOOSTEDDUDE]

Another great tutorial. Nice one!

[@Breezy-Codes]

Glad you liked it!

[@pejuemmanuel2137]

Thanks so much for this video, can you explain why pinging a switch 2 device from switch 1 failed?

[@patsley]

I am having the same experience.

[@patsley]

I was able to rectify the issue. Use a multilayer switch as the core router to route traffic from one switch to the other.

[@pejuemmanuel2137]

@@patsley Oh, thank you! I will try this

[@satyamanikanta2818]

@@patsleycan you let me know how can we overcome this pinging problem without using l3 switch I just want to get devices from both subnets pinged each other just with the router with the same layout used in video

[@patsley]

@@satyamanikanta2818 I don’t really know how to do this, but try configuring the cables connecting to the switches as trunk interfaces. This could enable inter-VLAN communication. Search for videos on YT on how to do this.

[@KLNYC]

Nice! can you do Layer 3 switch? tx

[@CocoBold]

Thank you sooooooo much!

[@Breezy-Codes]

You're welcome!

[@alawodeoluwabukola5318]

Thank you

[@Breezy-Codes]

You're welcome

[@satyamanikanta2818]

I couldn’t ping pc’s connected to right side switch with the pc’s connected to the left side switch. Can anyone out there help me with the problem i am facing? Also I don’t want to use any l3 switch I just want to get this fixed with out interfering with the same layout used in video 🙂

[@ruy123ofserenity]

I have the same problem

[@freddysandoval2549]

On the DHCP settings on the server you can try setting the default gateway on serverpool to the same you use for the others. It might solve the problem as I did.