Diagnosing & Fixing SAAB MISFIRE Issues

In this video I show how to diagnose and fix misfire issues on any Saab with the 2.8L turbo V6. You don't always need a tech 2 scanner to diagnose/fix but certainly helps! Either way, I'm sure this video will educate you on a few different methods to save money while resolving a misfire issue. Thanks for watching! Please consider liking, sharing, and subscribing!!
Contact: [e-mail]

[@jeppejac]

Dear Saab enthusiast. I live in Scandinavia, and I have just got myself a car from 2006 for a very good price, and you have really contributed to making this my very best experience in used vehicles ever. I really must congratulate you on your pedagogical approach to making all this accessible within reach of the average DIY person. All from junkyard scrapping to fine tuning the maddest hardware. You are the shit. Many thanks!

[@WeakestofWeeks]

Thanks friend!

[@TBD3.0]

Best video out there on this topic #1👍🏻 bar none.

[@wofy1970]

Hi, i had the same problems logicaly, i have always changed them with the original Bosch parts they would last for about a year or a bit more, but i listened to a guy saying that Beru coils were great so i decided to change them as i was really tierd of changing coils so i did with 6 new Beru ZSE174 coils, well it has been 5 years now never had a problem anymore. Cheers fron Italy

[@behemot199]

I have a problem with missfire on cold start. Changed plugs, coils, even timming chain. Missfire are full randomly, checked cylinders pressure and the only one worst was 9,5 bar's. Injectors clear and when car is hot sometimes had a little missfire on cylider 6 and car shakes very light, hard to feel. Any ideas? :( after cold start procedure missfires disapeard..

[@austenfiedler8783]

I have a very similar issue. Random miss on cold start, seems to affect cylinders 1-3 the most. Smoothes itself out after 5-10 seconds. No issues while driving or while engine is warm. Cannot figure it out.

[@behemot199]

​@@austenfiedler8783 Tell me, have you done a increase power with chip tuning some time ago?

[@user-cz1ex7kf2g]

I had random misfires on cold starts and it ended up being the MAF sensor.

[@behemot199]

@@user-cz1ex7kf2g Thanks! I'll check this.

[@wofy1970]

Hi again, i had the same issues, changed with Bosch coils but they do fail after a year o so, i have rechanged all of them with BERU ZSE174 coils, they are on for four years now no more issues with them. Money well spent i'd say. One more thing, Bosch coils made in Germany are lets say ok, the ones made in Slovenia, Hungery or China are junk

[@mustardstain504d6]

Like clockwork. I don't do one either.

[@DerekChabrow]

PCV valve? I had same problem on hwy turned out to be bad PCV valve that was sucking in oil into cylinder 1&2. Peeking into intake manifold to see if there's excess oil is a good first check.

[@matebary]

Hello, would Tech2 detect failing spark plugs, not only the coils? I've recently visited my friend with Tech2 with similar symptoms (jerky acceleration) but there were no misfires.

[@WeakestofWeeks]

It wouldn't necessarily detect failing spark plugs, just which cylinder is causing misfires. Sometimes it can be tricky to track down as some coils work fine then when they get hot fail. If it's been awhile since your last tune up I'd recommend replacing all of the plugs, and wouldn't be a bad idea to put all new coils in the back 3 cylinders closet to the firewall. Ideally you'd want to replace them all but to save money and hassle you can sometimes get away with just doing half. Then if one of the used fronts is bad it's an easy replacement. Also misfires can be caused by numerous other things. If you still have poor acceleration after a tune up I'd look into the fuel system and injectors.

[@tyrachel]

Thank you for clearing up my 2006 93 Aero 2.8. I’ll buy a tech 2.

[@michaelelkin9542]

I have Bluetooth ODB II reader. I have apps that can monitor the engine, but no codes. Is there an app I can use that will give me misfire information? Thank you.

[@andrewmcleod6016]

Hi I've got a saab 93 aero 2 ltr turbo 2002/3 , unfortunately I've a P0300 & an o2 sensor one bank one , the symptoms are flashing engine warning light (normally permanently on ) about 20seconds into idling , ive chainged plugs n coils & cleaned the lamdar , shes started (last two weeks ) to drink more oil , I opened the air intake by the filter box n it was dry but when I opened the lifetime filter it was sodden with oil !!! thats where I am just now , would you go for the turbo or towards the head First ? They can be a pain , but I love them . Thanks Andy

[@waynegood9233]

Drive it up a steep hill change the spark plugs also fuel filter and pcv valve the cheap things first later coil packs also blown fuse ?????

[@d4ve587]

On saab you need to use dielectric grease on the packs. Stops the pack issues. Most people no clue or dealers do on your service 👍

[@WeakestofWeeks]

Yes that is a good idea!

[@mustardstain504d6]

The coils have dielectric grease in the boot from the manufacturer. Bosch coils are garbage. The Standard ignition Blue Streak coils are great. Dielectric grease only keeps the boot from sticking to the plug.

[@JoK3Z3Mpror]

I got a misfire on cylinder 4 of an 08 2.0T ... Swapped coil out with a new one; new spark plug; switched injectors; compression is good, but I still have a misfire... Any thoughts on what it might be... I'm aware of the valve issue on the 2.0T, but if this were the case why do I have compression on that cylinder? Is this an ECM issue, car has only 130000km

[@marsdahustler]

1-check the air intake hose going to turbo for cracks 2-check the "L" shaped vacuum line under the oil dip stick

[@JoK3Z3Mpror]

_madebyMARS thanks, will check and see if there's a problem there

[@pedrx_v9323]

Did you ever solve this? I’m currently having the same issue on cylinder 4 and fixed it before by replacing both spark and coil but won’t go away now

[@krisradic6288]

Hi, thanks for posting this! Quick question, where did you buy your tech 2 from? Been searching online and not really sure which is the right one.

[@BassheadTony_9-3]

Mine the missfire change the cylinder many any time i clear code

[@caesar170988]

They were all oem coils . The saab part number is the short one on the bottom left . Guessing the ngk ones are just rebranded bosch . Thing to note : 06 ones made in Germany , later ones Slovenia. Gotta love that famed slovenian quality

[@WeakestofWeeks]

Good to know! Thank you for the info!!

[@1768ify]

Do you really need to clear misfire counters? On mine, I don’t get any history, I have to catch them real time.

[@WeakestofWeeks]

So that will be one major difference between the tech 2 and a cheaper code reader. IF you're getting a misfire code then you can use the cheaper scanner to clear, switch to coil to dif cylinder then see if another misfire code appears in the switched cylinder. However, if no misfire code is present (like in my situation) then you will need scanner like a tech 2 to see real time misfires.

[@hyrulejourney1205]

Even if all coils on these cars will eventually fail, the Bosch ones have been proven to last longer than any other OEM alternative. So you should definitely only use Bosch coils.

[@marsdahustler]

where you buy those wheels?

[@WeakestofWeeks]

They're Andro Spec J wheels with Saab center cap stickers: m.tirerack.com/wheels/WheelCloseUpServlet?target=runWheelSearch&initialPartNumber=J1880511042MS&wheelMake=ANDROS&wheelModel=Spec+J&wheelFinish=Matte+Silver+Painted&showRear=no&autoMake=Saab&autoModel=9-3+Aero+Sedan&autoYear=2008&autoModClar=FWD

[@1768ify]

Will that cheap OBD reader show misfires?

[@shakalpb1164]

Mike Edwards no

[@mustardstain504d6]

The 2.8 doesn't store the codes. It's frustrating.

[@inigomontoya6806]

You must have heard me yelling at you to put the oil cap back on. If there is a way to screw up, I have done it.

[@wackysparrow1768]

I've never had issues with cylinder 2, 4 or 6. It's ALWAYS 1, 3 or 5.

[@TaurionMartell]

i got misfires in all cylinders. thaught it was the coilpack but it was the fuel pump failing. acted real funky

[@TaurionMartell]

saab 9-5 aero 2006 btw

[@herrmann1423]

Hey mate is there a chance to contact you via email or smth it doesn’t work via KZbin

[@WeakestofWeeks]

Yes, you can email me at: [e-mail]

[@mustardstain504d6]

Stay away from Bosch new or used. Standard Ignition Blue Streak Coils are the answer ti frequent failures.

[@WeakestofWeeks]

I've actually heard that before. I think it was from Brian at Vermont tuning. I've seen the blue streaks for sale on rockauto.com and I'm thinking of picking up a set.

[@EyezOfTheBeholder]

@@WeakestofWeeks Ever end up trying the Blue Streak coils? I'm looking to replace my oem coils which only last about two years.

[@lykkesteinen]

How about some lighting in the garage, that doesn’t look like an flickering albanian Hospital’s light? Thanks in advance.

[@justinkuchma2421]

Your car is slow hahaha