this is how to enter diagnostic mode on a yamaha grizzly and check values. This video also shows what the values mean.
Пікірлер: 18
@bellarmine334 ай бұрын
Thanks for the info Devin! Great video and instruction, your note page was a big help! You've sure done your homework! Now I can check all the codes and see what's wrong. Also regarding your spark issue, obvious but don't forget to change your spark plug. Mine developed hard starting and no idle, would drive around 1/4 to full throttle fine. Changed the plug and problem gone! Same with my lawn tractor, very hard to start but would run and idle all day, new plug and now starts up easy every time. Hope this helps and you get 'er running Devin - Cheers!~ Bellarmine
@pdloder4 ай бұрын
What do you mean the lean angle was back to front from what you had written down? Maybe your LA sensor is buggered and that's why there's no ignition. Mine is showing 1.0 and I have ignition.
@EricLorenzen-y2y Жыл бұрын
I have the exact going on with my 550, did you find the cause of no spark?
@aidenmurphy29972 жыл бұрын
Do those numbers Change as you ride the bike automatically or is this something you have to check every day on your own?
@williamhusseyjr11433 жыл бұрын
I am curious as I know I seen a video how to test the idle air sensor - Isn’t there a way to make that exercise as well?
@carlball85903 жыл бұрын
My cluster is showing a E . Is there any place to have it repaired
@johnhutchinson53982 жыл бұрын
Check your incoming spark plug wire. A guy who worked on mine grabbed the wire and not the boot and it cracked the inside carbon wire and it didn’t have a spark. I changed it and it cranked right up.
@John-viheavyequipment3 жыл бұрын
can you check rpm in test mode? and also how do you get out of test mode?
@Siouxperman2 жыл бұрын
Same way, hold the 2 buttons at the same time.
@Siouxperman2 жыл бұрын
Or just turn the key off.
@wyattgillingham41344 ай бұрын
How do you clear a code?
@Siouxperman2 жыл бұрын
Good shyt brotha
@cristiannino4066 Жыл бұрын
What does a code 39 mean
@UNKLEWHEELIESON3 жыл бұрын
Helped me
@rodneythefirst9233 жыл бұрын
What does the codes mean on d 61
@devinkaatz24453 жыл бұрын
That is what fault code you are tripping. Example crankshaft sensor is #12