How to: Yamaha Grizzly 550 Starting System Troubleshooting and Repair

[@seanbalch7563]

Great step by step. I need a multimeter and looks super easy. Ty

[@hotburnymustard]

Thanks dude...very helpful. We use our 550 extensively on the farm & of course...wife said it wouldn't start in the middle of the pasture today.

[@baydoe121]

i love you tube.. a video for literally everything! Thank you for taking the time to do this!

[@braddsn]

Thanks for making this video. I am getting ready to change mine out, and I am using this as my guide!

[@WilsonsRec]

Brad Dawson glad you like it. Please subscribe for more!

[@colbyking6797]

This video helped me out alot! Thank you very much.

[@veronicadoody5915]

Excellent video, very helpful thanks

[@doughewitt3362]

Great job on the video! Thank you!

[@tim2468]

This should help. Thanks for making the video.

[@robertdentico9154]

Hey Corey, Great info here. Our 550 has experienced intermittent starting, or not starting actually. Would this still be a replay problem..? Battery is good @ 13.4 and the relay tests out the same way that you illustrate. I have checked connections thinking that it might just have a poor contact, all good. Well, I have not gotten down to the starter yet, the plastics fasteners have me baffled. Thanks much, Rob in Wiscasset

[@birdpersonbirdpersonnz7894]

Cheers for the vid, can confirm my solenoid is no good!

[@WilsonsRec]

Hard Holders NZ glad it was helpful! Please show some love by subscribing!

[@jetdr]

I have a 2010, never had a single issue. 1,075 miles and this happened. Everyone I talked too told me it was a starter relay, so being the Jet Mech I am I tested everything.

[@milesmorrison3145]

Thanks man

[@mapleridgefarm1026]

Hi thanks for sharing. Im trying to figure out what the issue is on my 2017 Griiz that i just bought as it dosent want to start when cold. When i say cold i mean just -5 and its in the garage!! Have you ever seen this issue? Any info would help thanks.

[@forevertera0000]

-5 😯

[@theboggarage479]

Hey I live locally and i have the same fourwheeler, having starting issues, all its doing is clicking at two different points, one at the starter relay and another from the other side

[@jayroc4123]

Do you have a video of a spark plug change on this model?

[@williamroy2502]

if my selenoid sparks when i try to bypass it means that i need a new relay?

[@frederickcatling7627]

Sure could use you guys help really bad

[@michaelyates6331]

My unit has power to the starter but I have a code 12 is it the starter or something else?

[@nealagem20]

it's most likely the starter relay. it was on mine with the error 12.

[@MrJoints4u]

I'm getting power to the starter. And it doesn't fire. How much power should I see ?

[@garygeorge5093]

I have a problem with my 550 starting, when I turn the key on the eps light comes on along with the back light of the dash. Nothing else. The starter will turn over but won't start. What do I check first?

[@rickhadfield1097]

I’m dealing with same issue did you ever find out the cause

[@rickhadfield1097]

Did you ever discover the problem

[@bakervinci163]

How do you find the wire harness for these ?

[@bakervinci163]

Rather where can you purchase them? They don’t come with the solenoid or the starters.

[@hmarin6824]

i install a bew starter on my but ot doesnt turn on now . the starter only make a noise like if i was.connecting it.on battery.

[@andriss1234]

How ECU history can be cleared on grizzly?

[@matthewallen4929]

Did you end up getting error code 10.

[@frederickcatling7627]

My 660 grizzly won’t start and is backfiring when I try to crank it up carburetor is leaking gas out of the bottom of it had oil in gas changed oil and spark plug

[@WilsonsRec]

If there is fuel leaking from the bottom it is almost always a stuck float in the carb. The float needs to be replaced or you need to buy a new aftermarket carb.

[@frederickcatling7627]

Corey Wilson ok thank you cause I’m about to give up it was cranking before it leaked gas in my oil I’m just lost right about now

[@buffykiller12]

So if I can’t bypass then your telling me it’s the starter

[@andriss1234]

Could anyone tell me hoe to delete fault code on grizzly 700. I get fault code 14 (air preasure sensor), but i don't know how erase it. I will try to do step by step from repair manual but unsuccessfully. I try to do this: kzbin.info/www/bejne/eKfcqHqketpmetE Deleting fault codes To delete fault codes, ground the EPS self-diagnosis signal connector 3 or more times within 5 seconds while the present or past malfunction mode is activated.