Dicolor & Novastar--How to Calibrate(Calibration) screen(cabinet) manually used novalct (In English)

Used Novalct(Novastar) calibrate(calibration) module, cabinet or panel and screen by manually.
No need the professional calibrate camera, just adjust in Novastar Control System software, the problem of brightness and color inconsistencies between cabinets and modules/panels will be solved! you can make any LED screen more pleasing to your eye in a matter of minutes.

[@beto9348]

Excelente explicación, muchas gracias.

[@vdjraghuchandigarh6193]

Today I have learned this type of setting for the first time. Thank you so much for learning

[@samzhou8510]

🙂

[@nhalam2037]

I can't color correct the indoor and outdoor led screen so is there anything else I hope you can help me with. thank you! 

[@samzhou8510]

@@nhalam2037 At present, manual calibration can help you to improve the brightness or color difference. It is more helpful for products of the same model and the same batch. But for different products or different manufacturers, even with professional calibration equipment, it is impossible to make them completely consistent, because the wavelength and visual angle of the lamp beads cannot be changed. I hope my reply can help you.

[@nhalam2037]

@@samzhou8510 thank you for your reply your videos are awesome thank you for that. Wishing you a lot of health and success in life! 

[@ZulqaderKhan]

Hi

[@holbylarsen]

Thank you!

[@ngoprek_waechanel3230]

Nice tks

[@onebandman8106]

Do you have to do this everytime? Or just one time?

[@sonidojunior8137]

How do you move the color window??

[@ugurarda7518]

Thank you for the valuable information you have provided. Is this problem related to the receiving card? Although very rare, this kind of problem has happened to us several times. It disappeared after replacing the buyer card. But we couldn't understand why it suddenly appeared. I don't know if it is related to receiver board failure. Is it possible to repair the card if it is related to the card?

[@samzhou8510]

Most of the time, if this problem occurs during use, it may be because the firmware of the receiving card is inconsistent, some receiving cards are not controlled when adjusting the brightness, or you can try to turn off the correction function. Sometimes the correction factor affects this phenomenon

[@cvlarisciptasejahtera4897]

Hi, you use what camera and lense for calibrate? And what are the best camera and lense for calibrate?

[@samzhou8510]

cv laris cipta sejahtera that is manually calibration. No need camera and lense

[@user-lr1qd5ql1q]

Hello, thanks for the setup info. If you know how to increase the display area on the novastar msd600 board. Not a small corner from the top left, but a full screen.

[@samzhou8510]

MSD600 no have video processor function. i think you said it's scale function. but MSD600 just a sender. you can creat a windows. and that window the resolution same with screen. so it(video or picture) can be full display on screen. or used extend mode. make MSD in second monitor . and setting MSD600 resolution same with screen.

[@elmeracuna3327]

hi the screen is not clear together with the image what will i adjust..

[@mpmaxanator]

hi how would i go out of a free view box into a novastar

[@RockLander818]

Hi Sam!!! How are you?! Thank you

[@ledtech-lightinganddisplay3149]

If use 1no.different drive IC module in a cabinet then how to do configuration

[@AbdelkrimBouguettaya-sk3nx]

Hello, do thé problèm disappear if we change thé cabinet ?

[@mubasharfiaz9628]

Hi SAM for Manually Calibration what things we need to have with us ' I mean Camera or anything we need ......

[@samzhou8510]

Camera and key dogs . Key dog from novastar or other control system company. Depend what’s control system you used.

[@user-pj7hb2kr7v]

hi, thanks for info. you know linsn led software set this function ?

[@samzhou8510]

linsn also can be ok, but it's different operation;

[@audioledguatemalaqr4902]

funciona para pantallas de lotes diferentes???

[@JuanJosedos-vq3bm]

Creo que sí

[@robertoyague4655]

How to rotate the module?

[@PROSLV]

Pull the module out and rotate manually

[@samzhou8510]

@@PROSLV 🤣i think he is ask how to rotate the module display(rotate image display).

[@tachobarba6647]

Hola, muy buenas! Podéis hacer un vídeo traducido al español? O alguien sabe de algún vídeo de calibración para tarjetas novastar en español! Saludos Cordiales

[@samzhou8510]

Es posible que no pueda responder a esta pregunta porque no hablo español;

[@technicienelectronique1552]

I have a probléme , ,,, the rectified coefficient of the reception card is not reasonable, please settel after having ,,

[@samzhou8510]

Some modules have built-in lamp board FLASH, which will store the brightness parameter value and correction coefficient of each lamp bead, which can be read and used by software. The premise is that the display manufacturer must do point-to-point calibration and store the data in In the module FLASH, if the module itself is relatively low-end and does not have this function, it is necessary to re-calibrate the display;

[@technicienelectronique1552]

thank you for Réponse

[@goodday5405]

Hi

[@ZulqaderKhan]

Can you please help me

[@samzhou8510]

？？？

[@ZulqaderKhan]

I need rcfg file

[@ZulqaderKhan]

Hi

[@ZulqaderKhan]

@@samzhou8510 I need rcfg file

[@ZulqaderKhan]

Hi

[@user-rf5qi9ze5h]

Hi

[@samzhou8510]

Hi