LED Screen Module Repair&Dicolor&DEA&NovaStar&NovaLCT

How to find and fix the problem from LED screen Module(P2.9 & P3.9 & IC exchange)

[@JLOFlix]

Great job!! This was very informative!! Thank you!!

[@vdjraghuchandigarh6193]

Your work is awesome, your hands finishing is very good and your cameraman is 2gud. Thanks for this video

[@rajubrtech448]

Very nice I learn so much knowledge.lot of thanks

[@The4disco]

Good eyes,good hands, large experience, 👍👍👍

[@miicelltechnosv7395]

Tks for sharing your great job fixing led pannels.

[@tecnovaio]

Muchas gracias por darte tu tiempo y hacer este espectacular video soy tecnico y estoy comenzando en el mundo de los paneles gracias

[@meharhassan6031]

its really helpful.thankx

[@EpicLed]

Awesome Ben looking for content like this

[@renatoortega7998]

Thank you for very informative video. ❤❤❤

[@MrAndreaSimms]

Good shit....Love the insight.

[@CarlTripulca]

Nice very good we have your product in Philippines nearby house and that's my goal too for rental

[@vanan97]

Very good video, keep it up.

[@thebake77]

Where can I purchase the plastic "mask", "mesh" that goes in between the pixels? P5 Resolution. Your video is great!!

[@stevehowell673]

Thanks a lot for the video

[@JS-oc2im]

Very informative. Appreciate your work. Not to be offensive, the cameraman needs to practice a lot.

[@andrewzhangx]

You work is brilliant thank you! Could you please advise what temperature you've set for the hot air gun?

[@samzhou8510]

Depend what’s the pixel pitch (lamps size)you do the repair.2020 for P3.9 can be adjusted to 300-320. 1010 for P1.2-P1.8 suggestion to 280.

[@andrewzhangx]

@@samzhou8510 Thank you so much!

[@ssbbdtv]

very nice repairing

[@maliknadeem3074]

Good job my friend ❤😍😍😍😍😍💯💯💯💯💯

[@ugurarda7518]

You explained great, thank you. In LED screen installations, in some cases, the lines of the pixels break in the card and give a worm error due to this. Although the pixels are solid, that line of the circuit can break due to voltage. A new line is drawn to the relevant pixel with the help of a wire over the chip. Can you explain which chipset will draw the line from which leg for this new line. I explained it a bit complicated, but you know what I mean. Finally, it would be great if you could explain the functions of the chipsets and related chipsets, and which leg controls which line and its function.

[@samzhou8510]

I see what you mean. We call this phenomenon a caterpillar. The reason is that a lamp bead is damaged and the current leaks to other lamp beads. This is related to the PCB design and the scanning method we often say. The reason why the display screen can display images is that it displays each line at a high speed. Because it is very fast, we can see continuous images, which are actually displayed line by line, If a lamp bead in the row is damaged, a caterpillar will appear in the column where the lamp bead is located. To repair this problem, just find the damaged lamp bead and replace it. Now many driver chips have been eliminated, such as ICN2153+5958;

[@hamim2.s3hy]

its really helpful. If i change a dot/ ic,what is the perfect temperature of heat gun?

[@samzhou8510]

Depends the lamps size. From 280-320

[@los5deltinaco]

good job!!

[@azeezazee4954]

Ur brilliant. Salute.

[@wimadehi8116]

Good job my friend ❤

[@samzhou8510]

Thank you. 😀

[@Chematus1]

Thanks for the video What brand and model of welder and tin do you use? Thanks in advance

[@samzhou8510]

BAKON BK3200

[@vickyganbakoled8348]

We BAKO use BK936 60W with tin

[@cjayvllmr1313]

Hi are you supplying pixel dot i would like to try to repair our module smae like you do i am having problema were i can buy pls help

[@kolawoleolusayero7149]

my processor is displaying ERR and RCE and is not working. what should i do? thanks for your help

[@user-od2fl4mw3u]

What is the name of the tool for removing the module?

[@alexmag5735]

MBI LED driver usually controls an area of 16 by 8 pixels.

[@samzhou8510]

Depend the PCB design. Have 1/2 scan for control 16*2 or 8*4 ，1/16 scan control 16*16 or 8*32. Lot of designs.

[@Dortokamaisu]

👌👌👌

[@neeleshrana4719]

My friend you can check the ic which is blue or red simple short the r-ext resistors and one of the colour cluster is bright this is the true ic you find. Thanks

[@samzhou8510]

yes, you are smart.😄

[@user-zl7rm6tk4v]

Hi sir,can you give a specs or model about your soldering equipment and also your air heater,..thank you .❤❤

[@samzhou8510]

There are many brands and models in China. The soldering we commonly use is “BAKON BK3200"”, and the hot air gun is"ANLIXIN ".

[@joelcarreon3011]

I have a problem with my 1 panel p3 there is a blue color square did not follow to the program pls help to repair

[@samzhou8510]

it should be this area the blue drive ic have problem. do the exchange will be fixed.

[@joelcarreon3011]

Got it thanks

[@vijayvishwakarma3147]

About in modual ic supply

[@mdaslamknl]

Great Where can i buy led Thanks

[@samzhou8510]

You mean lamps or screen?

[@user-cl9gr8qs5s]

Siz pixl,?

[@redriot884]

can i know what song is that? it stuck in my head haha

[@boboytiu2917]

Where can i order ic nd bulb

[@samzhou8510]

ask for who sales taht screen to you the guys

[@ameenmuhammad9123]

Hallo sir i am led wall sarvieser but i don't know all can u teach me

[@jaircosta736]

comprei painel da dicolor e não veio as placas reservas como foi acordado

[@samzhou8510]

Maybe you bought too little, so they didn't give it away. Generally, there are 1% spare modules. If you only buy 10 square meters or 20 square meters, it is very likely that there will be no spare modules; you need to Buy;

[@dannyboy8365]

where can i purchase pixels

[@samzhou8510]

maybe you can ask for led screen factory. because not easy buy from lamps factory. because they just sell to factory.each time maybe 1000000000.like that. Non retail

[@princedhawan7913]

screen showing color errors 😢

[@inba1035]

I need 40x10 p3 led wall can you supply

[@inba1035]

40x10 feet

[@samzhou8510]

can be 39.37*9.84 feet; it's 10M*3M. also If your hands-on ability is strong, you can choose modules and frames to assemble by yourself, which is a common practice for low-end LED screen;

[@shadem1]

Where are you

[@yitbo1]

what is name of the cabinet name for testing sir?

[@samzhou8510]

Dicolor UC series

[@samzhou8510]

Dicolor UC series

[@mukundparmar4750]

Led module riparing in Gujarat

[@juberpatel007]

Need p 3.91 led strips

[@juberpatel007]

Need 300 sq ft wall in maharashtra

[@samzhou8510]

thank you. pls give me maill. [e-mail]

[@juberpatel007]

@@samzhou8510 [e-mail]

[@princedhawan7913]

pls help

[@samzhou8510]

WhatsApp：[phone]

[@neeleshrana4719]

I am not smart my friend. I have. 12 years of experience in led screen repearing.

[@sunilchaudhari1794]

Lad screen modul buy

[@samzhou8510]

How many and what pixel pitch you need?

[@tempsx92]

It’s poorly filmed!