DID THE UPGRADES IMPROVE THE MN78 OR WAS IT A WASTE?

Finally finished with the upgrades for the MN78 and it is looking promising. It seems to have more power and for some strange reason it seems to have more wheel speed. Upgrades installed included: 370 motor swap, MN86s ESC, metal shocks, metal transmission gears, metal pinion gear, metal steering rod, and bigger wheels. This thing should perform much better than stock. Thanks for watching and be safe.
Parts list links below.
s.click.aliexp...
s.click.aliexp...
s.click.aliexp...
s.click.aliexp...
s.click.aliexp...
s.click.aliexp...

[@SimplyRC]

Nice. I have question: Increasing batteries power will burn the mother bord ?

[@PJsElectricRCAdventures]

Unfortunately, with the stock esc, it is very possible that it will burn. The esc is very small and is not capable of a lot of power. You can get more power & speed out of it with the 370 motor conversion. The esc can handle that power from the motor upgrade with the stock battery still being in use.

[@Rc_Alex_76]

My metal axle binds when at full lock is this normal or did i buy the cheap ones i thought all were same but some were more expensive thanks

[@PJsElectricRCAdventures]

@Rc_Alex_76 the axles or the shafs? are you using the stock wheels?

[@Rc_Alex_76]

@PJsElectricRCAdventures the shafts bind so bad because the design don't know I the more expensive ones are better ?

[@PJsElectricRCAdventures]

@Rc_Alex_76 don't if the more expensive ones are better but I do believe you might have received a bad one out the bunch. I haven't had an issue with the cheaper metal shafts.