Turbine Blade - Fusion 360 Tutorial

This video show step by step how to create the 3D model of the turbine blade, i used the coil to captured the sipral 3D path for guide to create the blade.
Disclaimer :
this video just to show the method to create the 3D model, the design and dimensions itself doesn't reflect on the real turbine blade.
=================================================================================
Help me to spread the knowledge by donating to my paypal account:
paypal.me/DidiWidyaUtama
=================================================================================

[@amiralibagherzadeh560]

Didi, your tutorials are amazing!! Learned a lot from you so far. Please continue making awesome content.

[@DidiWidyaUtama]

Thank you, I will

[@vitymp007]

Thanks Didi; always learning a lot from you.

[@DidiWidyaUtama]

U’re welcome

[@CTR3D]

I learned a lot while doing the tutorial. Thank you.

[@DidiWidyaUtama]

Great to hear!

[@EnigmaverseElysium]

awesome video, exactly what i was looking for!! If I may ask, given this configuration, which way will the impeller spin? thanks.

[@AbuBakar-me1tp]

This is really helpfull for me. Love your tutorials .keep making such tutorials plz

[@DidiWidyaUtama]

Thanks, I will

[@limboe6030]

Awesome Tutorial, you need to know the bsics of Fusion to follow, but than its great. You can learn a lot. Thanks for sharing

[@DidiWidyaUtama]

Thanks

[@chris009able]

i am locked into a full rotation how do i only get the partial arc

[@robotboy3525]

Ingenious!!

[@DidiWidyaUtama]

thanks, please hit the like button and share my videos

[@bylolo4964]

Merci super vidéo !

[@DidiWidyaUtama]

Thanks

[@benjamingrandon5562]

thanks!!!

[@jeffreygong9821]

Thank you for the video. I’m having trouble at 2:57 where I cannot set revolutions to 0. The 0 I entered would turn red and I was not able to create the coils. I have all the dimensions right and followed all your steps correctly. Maybe there’s something wrong in my settings? Any help is appreciated. I am a solidworks user trying to learn fusion 360 and this is the first video that I watched and tried to follow along. Thank you for the tutorial.

[@anikarozeboom2093]

I'm having the same problem

[@anikarozeboom2093]

If you look at the pitch parameter when he switches to height and pitch it gives you a value of 152 which you can use instead of the revolution parameter.

[@samit9789]

instead of setting it to 0, set it to 0.25 since he got a quarter of a rotation

[@nachgebaut4176]

Thank you for the toturial. Can you please make a video about designing a housing of a turbo charger, that would be awesome.

[@DidiWidyaUtama]

Thanks for the idea!

[@siddhantkadam4002]

hi I'm engineering student i want to make dough kneading machine blade but i don't know how to start and which parameters should be taken to design the machine please can you help me?

[@bernicdewaal4314]

Would it be possible for you to create a simultaneous 5 axis toolpath for this turbine blade?

[@DidiWidyaUtama]

I would give a try soon, thanks

[@ibnutryansarpurba8621]

Do you have any reference how to analyze the aerodynamic of that turbine sir?

[@DidiWidyaUtama]

You can use any CFd software to do it

[@ianm1898]

keren mas, saya liat dari FB fusioner makasi ya mas,salam kenal

[@DidiWidyaUtama]

Makasih, semoga bermanfaat, salam kenal juga

[@ianm1898]

@@DidiWidyaUtama sama sama mas, oiya mas sebenernya kalo fusion itu ngga bisa ngelakuin apa ya mas dibanding inventor saat ini saya pake inventor 2019, tp pengen pindah ke fusion,karna fusion banyak banget tutorialnya,terlebih fitur freeformnya lebih mudah dibanding freeformnya inventor gitu, terus jg gatau kenapa yg ngebahas generative design(topology optimalization) di inventor lebih sedikit gitu mas, **saya coba cari di forum autodesk academy cuma ada 2 agak sedih gitu mas soalnya denger denger fitur invntor lebih banyak untuk dipake dilapangan,tp buat saya yg pemula agak kewalahan mau belajar hehe boleh minta saran ndak ya mas? makasiii

[@DidiWidyaUtama]

Inventor dan Fusion beda kelas dan juga beda harga, dimana inventor memang lebih kaya fitur terutama untuk tahap manufacturing di Industry dan tentunya penggunaannya lebih kompleks. Di sisi lain Fusion lebih mudah penggunaannya dan memiliki fitur yang saling melengkapi terhadap inventor, terkadang di Fusion bisa, tapi inventor tidak, dan sebaliknya dan memang Fusion lebih cocok ke aplikasi product development hingga prototyping dimana kolaborasi tim menjadi fitur yang inventor tidak sepraktis fusion untuk hal ini. Inventor sampai saat ini belum memiliki fitur generative design seperti di Fusion. Inventor pakainya topology optimization dimana ini berbeda dengan generative design ( banyak orang anggap ini sama saja/mirip2 padahal beda jauh). Fusion memang saat ini banyak tutorialnya karena memang sejak diciptakan perkembangan jumlah usernya melesat dan banyak sekali digunakan oleh para hobbist di sisi lain Inventor digunakan oleh orang2 industri dengan komunitas yang juga tidak sedikit namun beda karakter dalam bersosial media. semoga memberikan pencerahan. terimakasih (saran saya belajar dua-duanya dan tetap semangat)

[@ianm1898]

@@DidiWidyaUtama waaahhh makasi banyak banget mas didi atas jawabanya,sepertinya saya akan belajarin dua duanya seperti saran mas didi hehe, makasi mas setuju banget si mas,mungkin golongan profesional jarang yang diexpose ke sosial media ya,salut banget mas saya sama mas hehe mungkin kalo mas punya rekomendasi belajar boleh minta tolong ya mas,mungkin buku atau apa sejauh ini baru liat liat yutubnya TFI Cad dan 3D Parametric Solid Model Drawing jujur saat ini belum pernah mengeksplor yang part nya sampe puluhan hehe makasi mas

[@bellobello4633]

What kind of turbine is it?

[@DidiWidyaUtama]

this doesn't relate to exact actual dimensions and shape of a turbine, just similar shape and dimensions to the 4 stroke vehicle engine turbine.

[@freddyrosenberg9288]

I think you could have spent more time at the beginning of the video explaining the reasons for the steps you made to create the shape. That is the important part of the tutorial, not how to click and add fillets.