Different Pipe fit-up and aligment techniques.विभिन्न पाइप फिट-अप और संरेखण तकनीकें।

[@andrewmckeown6721]

Great demonstration on the use of squares and how they can help, and how to use the measurement scales to get a 45°, I even learnt a thing also. In the day I even drilled and bolted squares together to achieve various angles when working alone. Even made a set of flange squares which are good and quick to use. Think my favorite tool was a digital magnetic square for piping set ups, so long as the battery didn't go flat, and if it did then out would come the squares, lol, excellent quality video

[@technicalstudies.]

Dear McKeown, thank you for the excellent comment. And sharing a super idea. Hope for more comments in the future. Thank you.

[@juniormachado5444]

Sou brasileiro e os seu vídeos está me ajudando demais...parabéns pelo seu trabalho.

[@technicalstudies.]

Obrigado, irmão. Com amor da Índia.

[@upscmotivation9114]

Thanks a lot dear ❤️....bht achi jankari di he is vdo ke through...life me hmesa kam aayegi ...

[@technicalstudies.]

Thank you Bro.

[@6pointchris]

I like how my son's kindergarten pasta projects look similar to work I do. He's 6, and I showed him this, surprisingly he love this kinda stuff. Documentaries and stuff. After he saw he asked if we could do Mac and cheese for dinner. I absolutely said of course.

[@technicalstudies.]

That is awesome!

[@welding17]

Nice idea 👍

[@technicalstudies.]

Thank you Bro.

[@alecj9227]

really appreciate you putting this info out here

[@technicalstudies.]

My pleasure!

[@johnjacobjingle8302]

Even thou I appreciate what you are trying to demonstrate.. and yes most of this works.. trying to hold 2 squares on a 45 and taking measurement while trying to keep the fitting in line and rolled correctly, to get the tacks in.. you need 5 hands to pull it off or a crap load of expensive clamps... the videos are nice because it's all ready tacked up in the video and physics arent being applied.. in real life you would only fit up a pup on a 45 in the air if you where a masochist.. and realistically you would also just use a speed square or level with a 45..

[@technicalstudies.]

Thank you Mr John, you liked this video, whatever may be the reason. this is one of my best performing videos. I dont think the viewers follow the methods, exactly as i had shown. May be some viewers enjoy watching this video. Regards.

[@mdmusaddiq1270]

@@technicalstudies. Brother You are doing great.. Keep going..

[@heathbuckner4614]

I’m doing one of those 45s just like your video only rolled on it’s side in the air. We don’t always get to choose how or where we fit/weld. Great video

[@venkateswararaoadabala8205]

Good video,comparing water level Square is 10000% accurate

[@technicalstudies.]

Glad you think so!

[@MajeesTechnicalServices]

Excellent videos.

[@technicalstudies.]

Thank you bro

[@farnhamclose11]

Saved it to my favourites. Good video.

[@technicalstudies.]

Thank you Bro.

[@Ary-tb3sd]

Sin lugar a dudas muy buen video de demostración de sobre el uso de escuadras en presentaciones sobre cañerías de alta presión. saludo cordiales desde Argentina.

[@technicalstudies.]

Gracias hermano. Saludos desde la India.

[@muntajurrahaman1861]

Most useful video,thak you so much sir

[@technicalstudies.]

Thank you Bro.

[@manofstilllee9183]

i realy like ds vidio...thants for sharing...👍👍👍👍👍

[@technicalstudies.]

Thank you Bro.

[@ancasanjaya]

Good job 👍

[@technicalstudies.]

Thanks Bro.

[@zahirsoualmi2041]

Tank you

[@technicalstudies.]

Thank you.

[@rheapillai3298]

Amazing work😻

[@technicalstudies.]

Thank you.

[@rojorojo3754]

👍

[@HurtigeHelene]

I like your demonstrations. Some of them have helped me. But most of the techniques shown is not worth anything in practice. If my boss saw 5 guys trying to hold all these squares and rulers, he would get a heart attack. 40$ x 5 is absolutely insane. No. If you cant fit up and weld pipes by yourself, your not worth much. Im currently working on 20" spools. Doing it all one mann. Cutting the pipes, grinding, fitting, welding. Using only a digital level. QC on everything and 100% visual, 10% magnetic, 10% xray on every spool. No problems at all. But all respect to you for the videoes. They are absolutely correct and the methods shown are sometimes making me say, hm, im gonna try that. Then i try to get 5 of my co workers to help holding squares. Not always easy 😅

[@technicalstudies.]

Dont worry Bro. Work hard and try to learn more methods. One day you will be able to use these methods easily.

[@HurtigeHelene]

@@technicalstudies. How will i be able to use them with only 2 hands? And why do you refer to me as bro? You dont even know me.

[@technicalstudies.]

@@HurtigeHelene You may need to use your brain also. I am sorry, I referred you as bro.

[@er5722]

I like the 45 method, sometimes in the field you might loose or drop a lvl and cant or don’t wanna make the trip couple feet down to get a new one

[@technicalstudies.]

Bro, I am happy, you found something useful in my video. Thank you.

[@khosrosafaie9761]

Great 👍🌹🎉

[@technicalstudies.]

Thank you Bro.

[@jorgehenriquegabrieldecarv4433]

Muito boa essa troca de conhecimento compartilhado. Bravo!!

[@technicalstudies.]

Thank you Bro.

[@cegaiyabdool9260]

I like the Stabila

[@technicalstudies.]

My favourit.

[@vinodram6296]

Good 👍

[@technicalstudies.]

Thanks

[@kangsupriclp1895]

Good idies

[@technicalstudies.]

Thank you.

[@muhammadsolahuddin997]

thank you

[@technicalstudies.]

Thank you.

[@oo-qq3eh]

👍good妤

[@technicalstudies.]

Thank you.

[@niranjankumarsingh3594]

E sab video me dikha uska formula bataiye

[@technicalstudies.]

@@niranjankumarsingh3594 Bhai, ye tho subse simple thareekha hei, formula kiskeliye hei. kzbin.info/door/hFPnQNAYou-SzqJU5QbepQvideos

[@niranjankumarsingh3594]

@@technicalstudies. Sir hamko chahiye all pipe formula

[@nguyenuchuan3206]

Cám ơn bạn video đầy ý nghĩa

[@technicalstudies.]

Gracias hermano

[@Allegedly2right]

Can tell he has never left the class room haha.The welder pulled it was right when he got his hands on it.Heard that one before.🏴󠁧󠁢󠁳󠁣󠁴󠁿

[@technicalstudies.]

Bro, I made this video to impress the pipe fitters and inspectors, and the reaction is wonderful. Viewers like this video very much.

[@Allegedly2right]

@@technicalstudies. Make them have it haha I like the bright lights that’s why I weld.

[@dharmendarsah8125]

Good

[@technicalstudies.]

Thank you Bro.

[@charlesgauldin8010]

Cool video 😎

[@technicalstudies.]

Thank you.

[@MdWaheed-hx3xl]

Zbrdst video

[@technicalstudies.]

Thank you Brother.

[@ahmadbasirun1105]

45° what number at the angle rules?

[@kingdjaouad7692]

good video 👍

[@technicalstudies.]

Thank you.

[@Badshah1916Badshah]

Nice vedio sir

[@technicalstudies.]

Thank you.

[@5phutsangtao-iQ]

💁💝

[@technicalstudies.]

Thank you.

[@yoschanel194]

Thank you sir,very good tutorial.i like

[@technicalstudies.]

Thank you bro.

[@pushpapanicker8547]

Good job👌👌👍👍

[@technicalstudies.]

Thank you

[@GeormarieDGPROD]

I like it. So what can I do to work there?

[@The_kushinagar_classes]

Very nice

[@technicalstudies.]

Thank you.

[@valentinlishkov9540]

cylinder intersect elbow

[@WELDERITOYTV]

Good job

[@technicalstudies.]

Thank you.

[@heaventoys]

good👌🏼

[@technicalstudies.]

Thank you

[@sumantapaikray9309]

Good concept

[@technicalstudies.]

Thank you.

[@chandrashekharpanicker7152]

Wohuuu😈😈

[@technicalstudies.]

What is wrong Bro?

[@nguyenuchuan3206]

Rất hữu ích,cảm ơn bạn @

[@technicalstudies.]

cám ơn anh

[@dartele1]

Show sua ideia, como tem pessoas sem estudo e humilde basta ter criatividade

[@technicalstudies.]

Thank you Bro.

[@vijayrayray7680]

Super

[@technicalstudies.]

Thanks

[@ashwathipanicker7592]

Fantastic

[@technicalstudies.]

Thank you so much 😀

[@gabriellacasse8463]

i really like your videos!!! saved and subbed

[@technicalstudies.]

Thank you Bro.

[@yep-yayaeasypipes5045]

Good jod... Thank's😉😎

[@technicalstudies.]

Thanks bro.

[@rojorojo3754]

Good

[@technicalstudies.]

Thank you

[@nktel8427]

I am from Iraq

[@technicalstudies.]

Welcome Bro.

[@md4uh]

nice work. what graphics software was used?

[@technicalstudies.]

Thank you Bro. Trimble sketchup

[@md4uh]

I thought so. Do you share any models in the 3D warehouse?

[@technicalstudies.]

@@md4uh yes. i used to share before. not nowadays.

[@nsemekeasuquo]

🎉😂❤😢 Nice work

[@technicalstudies.]

Thank you.

[@sultonbekurinboev7565]

hello, what kind of program is this, is there an android phone format for it?

[@technicalstudies.]

Skethcup. Phone version is there, but i don't know, how to use.

[@sultonbekurinboev7565]

@@technicalstudies. thank you

[@TV-io1cb]

Can you really do that?

[@technicalstudies.]

I am sure about that. Specially, these methods are good for inspection, after, and before welding.

[@buuchaev]

Что за программа? what is the program?

[@technicalstudies.]

Trimble sketchup.

[@valentinlishkov9540]

Plugin development

[@technicalstudies.]

I dont understand Bro.

[@al-aminkhan9781]

Tnx u so much

[@technicalstudies.]

Thank you.

[@sultonbekurinboev7565]

If the phone is Android format, please write the name

[@technicalstudies.]

I dont know Bro.

[@rjxskillzz598]

Hello, I’m confused on the pipe with the 45 degree bends why has there been 2 squares used ???

[@technicalstudies.]

Bro, is it possible to do with one elbow?

[@rameshji7873]

👍👍👍

[@technicalstudies.]

Thank you.

[@tonybarracuda3505]

@4:45 the spirit level is completely redundant

[@technicalstudies.]

Yes you are right.

[@kralgemicim]

I am preparing a textbook for students. Would you allow me to take information and images from your videos and add them to the book? I will write the name of your page in the bibliography section of the book.

[@technicalstudies.]

Go ahead!

[@technicalstudies.]

Please send me a copy of the book

[@mumtazalam5760]

I m not clear about 60 digree can u plzzz explain it's

[@technicalstudies.]

Bro, I think, please watch my previous videos. Anyway, i will make a video on this topic. Thank you for the suggestion

[@4uomni]

which animation - software name used

[@technicalstudies.]

Sketchup.

[@chahatparween986]

Sir how to fitup 30,40,55 degrees elbow

[@technicalstudies.]

I will make a video on this subject. Thank you for your suggestion.

[@SohelRana-ji9li]

Thanks sir

[@technicalstudies.]

Thank you.

[@gregorioramos4778]

A piece of cake.

[@technicalstudies.]

Thank you.

[@mohands5669]

Thanks

[@technicalstudies.]

Welcome

[@stevestubberfield3528]

Nice animation but nothing new and in reality some of those methods would take to many people or pairs of hands to hold all the squares tape measures and to tack the pipe

[@technicalstudies.]

Thank you. My friend, fabrication is a teamwork. Not only the fitters and welders, Safety officers, Quality Inspectors etc.

[@mahmoudmoussa9687]

Maybes nothing new to u my friend but for me something new and me happy for learning

[@stevestubberfield3528]

@@technicalstudies. fair enough comment but again in reality it would be only a welder and his mate. No way would a safety officer a quality inspector lend a hand or even get them dirty and it’s not often they would be present on site all the time job depending. I’m not slating your video it’s a good animation and technique but this is all taught at apprenticeship level or later in life training.

[@MrAjjordan]

@@stevestubberfield3528 lmao I don't know where you work but I want to work there. Most my life and the norm is you layout, cut, fit, tact and lay rod all by yourself. If you work with a side hand enjoy it why you can.

[@stevestubberfield3528]

@@MrAjjordan On sites in the uk. You have to have a helper to carry the pipe etc and set the equipment up plus they act as fire watch when working in roof voids above factories.

[@opensourceecon]

How the hell do you hold all those measurement tools while measuring?

[@technicalstudies.]

Bro, Fabrication is a teamwork.

[@fabiocavalcante5694]

Top maravilhoso. Muito bom.

[@technicalstudies.]

Gracias hermano

[@АйбекНасиев-у4о]

Рахмет рахмет рахмет.

[@technicalstudies.]

Could you please suggest a topic

[@lauzunkounga9520]

Formidable

[@technicalstudies.]

Thank you Bro.

[@pasindukumaradesilva8587]

Tan kue mi sir lanka

[@technicalstudies.]

Thank you Bro.

[@anilsurendran6626]

Y brange

[@technicalstudies.]

OK. I will.

[@cliffdariff74]

Dude, why the annoying music

[@technicalstudies.]

Bro, actually, this is one of my old videos, and for me, this is my hit video. Believe me, my latest videos are better. 😂😂😂

[@MrPoundfopound]

After almost 20 years of pipe fitting this is prob the worse video on fitting I’ve ever watched….. almost every fit you made could’ve been 10000000 times easier with a level that has a 45* bubble and plain level bubble

[@technicalstudies.]

Having 35 years experience, I make these videos. I made this video, referring one of the best piping book in the world. Please dont be overconfident.

[@YG-lb1sd]

@@technicalstudies. Having 2 months of pipe fitting, I love this video :).

[@technicalstudies.]

@@YG-lb1sd Thank you Bro.

[@alexmattimore766]

this is a great video, especially for beginners. no need to bash the technical way of doing it.

[@goldCrystalhaze]

@@technicalstudies. please, could you share with me the title of the book? I'm new in pipe fitting and I really like this job, but I feel stressed and overwhelmed from lack of knowledge...I would be grateful if you could help me..

[@MoradKhalaileh-o6w]

HI Sir>>> Can i call you or chat pleas

[@technicalstudies.]

Regarding what Bro.

[@oseniassilva6221]

Show 😅

[@technicalstudies.]

Thank you.

[@antaresko1]

good video

[@technicalstudies.]

Glad you enjoyed

[@fahadalrashid8411]

Good job

[@technicalstudies.]

Thank you.

[@ponnadaprasad7465]

Superb

[@technicalstudies.]

Thank you.

[@saebfaghih6406]

fantastic

[@technicalstudies.]

Thanks Bro.

[@sheelagupta2988]

Superb

[@technicalstudies.]

Thank you.