The setting you were not sure about is the number of hours you can set the heater to run, great video, we have this one
@wyattthomas20112 жыл бұрын
So you can set it to run for 999 hours?
@davejhanssens2 жыл бұрын
Do you know how to program the remote?
@TermoneenyCC2 жыл бұрын
@@davejhanssens Press the Power and Down Buttons together for 3sec, this should enter the remote programming/pairing, then operate your remote buttons.
@davejhanssens2 жыл бұрын
@@TermoneenyCC I have tried this and no go unfortunately
@davidsnelson37452 жыл бұрын
@@davejhanssens hi dave. try on and down when the unit is not running. I'm just trying to learn this unit as well. Programing the remote worked perfectly.
@neilfoster814 Жыл бұрын
This model of controller has all of the "secret" menu items deleted, you cannot access them by typing in a code like you could the previous model. All it has is Temp control, On/Off, Timer and that's it! With the previous model you could alter the fan speed, link to you phone and Afterburner app, pump pulse rate and voltage range. If you want the earlier style control LCD, you also have to change the ECU board too as they are different protocols for controlling the heater. The 'older' style LCD has the WiFi symbol at the top of the display, the newer one does not.
@brahoy Жыл бұрын
This is the reply I was looking for but not looking for 😂. I really need to adjust the pulse rate as mine runs rich. Guess I will have to just run it in high alt mode. 😢
@moomoomlik997 ай бұрын
So there is no way to adjust it?
@neilfoster8147 ай бұрын
@@moomoomlik99 No, unfortunately not.
@wilddevon31222 жыл бұрын
Fantastic, I've been struggling with my controller & finding a video for the same controller as yourself, life saver, thanks :-)
@philcross73153 жыл бұрын
I've just got a couple of these heaters. Like you, I haven't got a clue how to set the timer. The "Chinglish" instructions are almost useless. One thing I have found, is to prime the diesel pump, press and hold the up and down buttons at the same time, and the pump will start priming. It does however need you to hold the buttons or it cuts out. Not ideal if you're trying to prime your new install on your own. If you or anyone gets any more info on this controller, please post it here, I'd love to know. Overall though, I'm impressed. It's warmed the space we have it in very quickly, and really didn't burn that much fuel. Thanks for the video. 👍
@collarbone1003 жыл бұрын
Yes thanks for your comments will be trying mine out tomorrow with all the info on your video, Thanks again Russ 👍
@garylamb78743 жыл бұрын
Activating the Timer Start/Stop function Press Settings and decrease buttons at the same time for 2 seconds. Timer active indicator will turn on (clock face) If activated while unit is shut down, this will schedule a start operation, and ON will flash next to the timer icon. If activated while unit is running, this will schedule a stop operation, and OFF will flash next to the timer icon. At any time while the timer function is active press the settings button to see the remaining time to ON or OFF. Setting the Timer Delay Press OK and Decrease buttons at the same time for 2 seconds. Timer active indicator will flash. Press On/Offbutton to select the digits to adjust. Use the increase and decrease buttons to adjust time delay up to 24 hours. Press the OK button to save the settings and exit the interface .. or press the Settings button to exit without saving.
@Snailmailtrucker3 жыл бұрын
@@garylamb7874 Thanks for that info... I'll give it a try !
@selfian85113 жыл бұрын
@@garylamb7874 thanks a lot. It is working. On my I think I have problems with temp sensor, because I set it on 20 grad and he not stop when reach 20 and he continues to heat up non stop and never shut down .
@anthonyjenkins3812 жыл бұрын
@@selfian8511 it will go up to around 180c this is the temp it is blowing out, in order to get the space to the desired temp. Hope this helps
@Snailmailtrucker3 жыл бұрын
YAY I finally found someone else that has the same controller as mine ! Mine has that circle with the negative sign in the middle and my Settings button doesn't do Squat ! Mine came without any instructions too ! ALPINE Mode...I just learned what the hell that icon was ! My lowest Pulse rate was about 120 beats per minute before...with the Alpine mode it is down to about 80 beats per minute...Perfect ! Liked/Subscribed !
@jasonsaville13613 жыл бұрын
That's actually called "Plateau" mode, its basically an econo mode to balance fuel\air ratios. It's one of the few things my manual did have in it.
@darrenhenderson18493 жыл бұрын
just wired up same controller, all lights up but displays no error just circle negative symbol and 3 dashes no numbers & will no turn on HELP!! liked and subscribed
@andrewgamwell21813 жыл бұрын
Loving the newly found Plateau mode, thanks for the info. Perfect for night time to keep the chill off in my T5.
@lukebarton39743 жыл бұрын
Yeah great finally someone with same controller I was worried when mine went to 180 c as well but looks like they all do or close to it
@stal0232 жыл бұрын
@@darrenhenderson1849 Did you long press the power button?
@douglundy57552 жыл бұрын
finally, this is my model and doesnt match most tutorials. Finally on the same page and hope this shares all the functions.
@douglundy57552 жыл бұрын
okay hitting the OK button shifted it to temp display modes, sometimes...then it turned it off! Hope to find something that sorts out this controller style.
@garylamb78743 жыл бұрын
Activating the Timer Start/Stop function Press Settings and decrease buttons at the same time for 2 seconds. Timer active indicator will turn on (clock face) If activated while unit is shut down, this will schedule a start operation, and ON will flash next to the timer icon. If activated while unit is running, this will schedule a stop operation, and OFF will flash next to the timer icon. At any time while the timer function is active press the settings button to see the remaining time to ON or OFF. Setting the Timer Delay Press OK and Decrease buttons at the same time for 2 seconds. Timer active indicator will flash. Press On/Offbutton to select the digits to adjust. Use the increase and decrease buttons to adjust time delay up to 24 hours. Press the OK button to save the settings and exit the interface .. or press the Settings button to exit without saving.
@Snailmailtrucker3 жыл бұрын
You Rock dude !
@Joseph-dt2ez3 жыл бұрын
Thank you for this. Needed to know if I could set a timer on mine. Does it also do a clock function?
@colinberry41873 жыл бұрын
Do you know if you there is a clock/time feature on this style. Really helpful instructions.
@ZerHour3 жыл бұрын
The mystery goes on ..I can set the time to go off etc but as soon as press ok button a to save the settings it doesn't save them any idea ?
@cevineg12 жыл бұрын
@@ZerHour I don't think you are setting a specific time for it to come on. I think it is you are setting the number of hours before it does come on. eg. In 8 Hours time
@mickypful2 жыл бұрын
Thanks for this info. I thought I was going mad as I couldn't make head nor tail of other you tube vids. This has been a life saver.
@artyarty54983 жыл бұрын
I lost my booklet and am having trouble finding info on this particular model. I do remember that if you hold up and down arrows at the same time it activates the pump to prime system.
@kolbolt2 жыл бұрын
Exactly the information I needed! Thank you
@GloucesterLGB Жыл бұрын
I have this control on the 3rd 5KW all-in-one (red slim case) I bought in January 2023 from VEVOR. The two physically identical heaters I bought before in 2021 and 2022 had what was called "new Blue-style controller" with the elapsed- time. I do not like this control - NOT because it's in any way difficult to use, but because it connects to completely differently-programmed controller! This controller start-up routine idles the fan super low, and turns on the glow plug. When the plug reaches temp, it does a fan pulse with 3-shoots of fuel from the pump and then drops the fan speed back again. Then starts pumping the normal H3 pump rate before gradually increasing the fan speed to a high rate. This results in too much fuel and white smoke during start up and a fuel smell escaping from the air intake for about 5-10 seconds - until the flame in the burner can be heard noticeably increased and the glow plug goes out. After that, the fan comes up to a mid-range blowing lukewarm air until it reaches operating temp at H3 by default and the blower settles in. At shutdown the glowplug comes back on and the fan is slowed to almost stop - running at idle for about a minute or so - apparently with the idea of allowing the additional the burner chamber to burn off more unburned fuel residue. Then after hearing the exhaust pipe ticking from the heat, the fan finally comes back up to a useable speed to complete the cooldown. The identical unit with the earlier "New Blue Controller" did not attempt to reach near overheat conditions by virtually shutting off the fan on an already hot burner chamber with a lit glowplug. Instead it turned the glowplug on with the blower going immediately to a high speed until cooldown was completed. During startup, the fan ran at a slow but still functional CFM while the glowplug was on. On reaching ignition temperature the pump was started at a high rate, the fuel ignited and the fan speed was increased to force more air through the chamber. The result was no exhaust backflow and faster operating temperature air discharged from the outlet. I do not prefer this new style controller at all. However, it is both the controller and controlboard (and possibly the harness wiring) that would have to be retrofit to convert it to the timer-type Blue controller. (Unfortunately this same controller format with "H3" on the display is also being sold in the original blue controller shell! It is not to be confused with the black or blue "00:00" ones!) The start-up and shutdown procedures programmed into this "H3" controller do not compare favorably against the "00:00". This was not an improvement.
@gunnaralv Жыл бұрын
For initial priming of fuel - hold in up and down buttons at the same time for 2 sec.
@muthafuckaiwazgetnchanged8251 Жыл бұрын
If you feel with you're finger in-between the illumination button and the ok button in-between there is a button if you hold it down for 3 second you can get the fuel pump to prime it's self well it just runs the pump untill it gets fuel
@kman6482 Жыл бұрын
Yes my controller is the same. I think this comes with the variable heat heater. Like you said it isn't as common as the other style controller. Any how you showed how the Plateau works. It is dropping the heat down which is great. I also think the Celsius reading isn't 126deg but 26. You just leave the number 1 Off. Cheers.
@joshf2867 Жыл бұрын
That number is the internet temperature
@laurieraphael92613 жыл бұрын
Awesome. The instructions aren’t able to be followed by what they give you. Good man
@offgridscotland10 ай бұрын
So glad I found this video this controller has been a pain to figure out!
@burntorangeak Жыл бұрын
Real life learning. I'm three years, and two generations into these things.
@jeffclark50247 ай бұрын
I just got one of these about a week ago and it’s a near identical controller but it had a fuel pump prime button between the ok and settings button on the left
@jond15362 жыл бұрын
I also have this controller, figured out most of the settings, I am looking for how to get into the deeper menus/setting, I want to adjust the pulse rate and or the Fan Speed to lean this thing out, ( no soot buildup i can tell). On regular mode it easily gets to 206 C and plateau mode (aka high Altitude reducing fuel for lower oxygen content in higher altitudes) it runs about 145-155 C. I know either speeding up the fan (for greater cooling and more air into the combustor) or lowering the pulse rate to reduce fuel will bring that 206 C down to a manageable rate say 176-189 C. Any one know anything more about this style of controller? Thanks in advance if someone does ,
@Chops002 жыл бұрын
How hot is too hot for these things?
@douglundy57552 жыл бұрын
this one has a lot of info on the two different controllers and how to use the one that we have, kzbin.info/www/bejne/oaC1d4GIbJumgs0
@traceyflanders2 жыл бұрын
@@Chops00 230 Celsius. Wouldn’t go above 190 celsius
@alanjm12342 жыл бұрын
I've been running mine in Plateau mode at sea level to reduce smoke and soot. Seems to work ok. I haven't seen anywhere that shows how to get into the deeper menus. Maybe an Afterburner control unit would be an option if you really want that capability.
@premierexterior87202 жыл бұрын
Brilliant!.. couldn't find the instructions for the controller anywhere.
@DanielOplinger2 жыл бұрын
I installed a heater recently with this controller. It came with some limited instructions. Including how to set the countdown timer for on and off. Anyone interested in photocopy of that?
@b0b0- Жыл бұрын
The Alpine or plateau setting is for when you are using the unit at high altitudes. I don't believe you should use it at lower altitudes as it's an incorrect fuel air ratio. Alpine and plateau are just terrible Chinese translations for " high altitude "
@MickeyFourZeroFour2 жыл бұрын
Great advice.. I needed this, got too much heat at program 1 in the Night.
@paulhughes44342 жыл бұрын
I think the code is 168 after pressing ok and on together . Heater 5 to 8 kw heater should be set to 7hz and fan at 5000 rpm from doing some research .
@mattsmith20512 жыл бұрын
Do you have any more information of possible codes for this setting? I am able to prompt the 3 zeros but 168 is not the code and I am unclear if an advance settings menu exists for this controller? I am having a problem with my glow plug wattage only getting 4.5V but when used in my mates heater it gave a full 8V. HELP PLEASE!,
@howardsinclairjr5682 жыл бұрын
The screen you're not sure about is for programming remote control thank you for you're help
@josefcopf3 жыл бұрын
Hi, can you please advise me? How to switch to 24V voltage? The old model was PIN 1688. I don't know how to get to the service menu.
@danishbacongoespz2 жыл бұрын
Anyone found a way to change hrz and enter hidden menu on this "new" model ?
@allenmaddux76112 жыл бұрын
I have this unit too. It worked great for about 3 months, just broke today. Still checking it through. The controller went black. I checked all the electrical wires and connections, all checks ok. If only I could catch somebody on their phone number, maybe have a better idea what broke.
@twisttwister8254 Жыл бұрын
I have the same heater and couldn't figure out the controls. No instructions. . Works great thou
@TedBean2 жыл бұрын
To adjust the temperature, just open a window. If it still gets hot, open another window...
@awakekiwi2 жыл бұрын
ya but extremely wasteful of fuel
@TedBean2 жыл бұрын
@@awakekiwi it is but the temp out of the heater does not go below 96C so can get quite hot inside...
@seb42 Жыл бұрын
@@TedBean It is really stupid that the heater doesn't turn off when target temp is reached... It should stop pumping fuel when target temp is reached. Then when temp drops 2-3 degrees below setting it should turn on again.
@Golo19492 жыл бұрын
Thanks, just bought one and it looks like my controller is like this. I haven't set it up yet so it will be interesting to see what it looks like. my instructions show a screen like yours.
@Golo19492 жыл бұрын
Hi, I have just fitted mine temporarily ( just have to drill my garage wall for the exhaust and air inlet). I hadn't noticed before but my controller is like yours but it has 3 buttons on either side? The instructions dont show it, any ideas?
@Golo19492 жыл бұрын
The button has an icon of a fuel filler nozzle and it is lit?
@Golo19492 жыл бұрын
Am I the only one with this type of controller? searching the web has brought no joy.
@twisttwister8254 Жыл бұрын
Just what i was looking for. Thanks 🎉
@Listivo3 жыл бұрын
Are there any updates on this LCD controllers functions? Just installed mine yesterday.
@douglundy57552 жыл бұрын
also in need of this. mine seems defective but works on manual mode, will not prime. Im trying to get a replacement out of wal-mart and they refer me to vevor and make excuses and promises.
@seb42 Жыл бұрын
My heater does not stop when it gets to set temperature. For example: 1) Trailer is at 14C 2) I set temperature to 20C. Heater turns on and heats 3) Trailer reaches 20C. Heater goes to minimum setting but does NOT stop 4) Trailer temperature keeps rising to 25C+, very uncomfortable. How can we have the heater turn off or run fan alone when reach desired temperature?
@chrisoneill67472 жыл бұрын
I've just installed the same model. I wish the controller was like the old style. I tried hooking up an older style controller but it just gave an error code E-07. Incompatible it seems :(
@rocknsnowryan9400 Жыл бұрын
i think someone mentioned that it might have a different mother board. i got the same error code with just swapping the heater out and using my old controller/ wiring harness. I might try that again but try using old mother board. if not then afterburner controller
@gilesbyford37732 жыл бұрын
Thank you - perfectly made and judged vid👍
@ColtonLoberg3 жыл бұрын
FINALLY
@jimsarranadventures30053 жыл бұрын
Hi. Thanks, finally found the controller that was shipped with my unit. I like this one, simple and easy to use. Do you know how interchangeable these controllers are as my portable unit with 4 heating ports is not doing what I need. Cheers.Jim.
@Snailmailtrucker3 жыл бұрын
As long as they have the same type of connector...they are supposed to be interchangable.
@philcross73153 жыл бұрын
Some of the older versions have a different motherboard, which is much more functional apparently. The plugs on them are the same, but the plugs are in different positions on the motherboard, so you'll have to work out how to plug it in correctly. There is an aftermarket controller called an "afterburner" which does everything, and more. Google that, and there is some good info on which motherboards work with which controllers.
@mattsmith20512 жыл бұрын
Has anyone been able to workout the password for advance setting to get past the three 000? Is there an advance menu for this model that can be accessed?
@joshf2867 Жыл бұрын
Lmk if you found out the code for advanced menu. Also what is the key combo?
@jontaylor5895 Жыл бұрын
@@joshf2867 hold ok and on/off. Nobody can get the code.
@imthebestpotato58142 жыл бұрын
I have the same controller, couldn't work much out but before I knew it diesel was going though line & warm air was coming out,im talking about 1min.is this to quick?.also the exhaust pipe was bloody hot to hot to touch,
@julianwebb8712 Жыл бұрын
Can you just swap this out with the more common style or is it matched in some way with the main board in the heater itself. ?
@MrTestpilot72 жыл бұрын
great video can you tell me where to buy an extra lcd controller for back up purposes.like this one.
@douglundy57552 жыл бұрын
no end of controllers available on ebay, just google the unit. Under $20.
@Joshjj32123 жыл бұрын
Any updates on this controller? the hidden password protected settings in particular?
@glennbuller70363 жыл бұрын
That's what am looking for Aswell
@joshf2867 Жыл бұрын
Any word on this?
@Appalachia02 Жыл бұрын
How low does the internal temperature drop too when in the H1 setting? I saw you set the temp down to 15C does it drop down and maintain the temp at 15C.
@seb42 Жыл бұрын
When in the auto mode, and I set it to a temp, will it automatically adjust fan speed AND fuel rate? If I set the temp to one lower than ambient, will the fan just run on its own?
@eldorado19543 жыл бұрын
I need this model of controller. Where to get it? The other model shows e-7, wrong controller. Need same as you have.
@johncavacini9951 Жыл бұрын
Do you happen to know what the function does when you hold the down button and power at same time?
@specialk1287 Жыл бұрын
Thanks, saved me
@fixcars50932 жыл бұрын
i have this also,could not get it to prime ,so i just hit the start on and it did start! the two blinking lights that indicate air in exhaust out , only the air in is working ! i could also not get any response from display! is the display bad or the isu?
@johnwilson16202 жыл бұрын
Might that last setting be a timer to off that you can set??
@pcarlson19792 жыл бұрын
Thank you 👍
@garyreed3543 жыл бұрын
That's the timer you can get it to shut off or turn on
@Snailmailtrucker3 жыл бұрын
I want to buy one of the other style that looks exactly like this one...but how will I know what one to order? I don't want another one like this one !
@philcross73153 жыл бұрын
EBay has the older motherboard, and the controllers that work with them. They're about £15 each. One thing, the boards have identical plugs, but in different positions. There is a KZbin video of how to spot the differences. If I get round to it, I might do a video to help others.
@alanjm12342 жыл бұрын
The picture of the fan on the new style has 3 blades, the old style has 6. I guess look for the 6 bladed fan on the ads?
@gregbobrowich72 жыл бұрын
Did you ever find instructions. Mine came with some.
@simonadams41123 жыл бұрын
Has anyone found if there are advance settings ,if so what is the pin .TIA
@glumpy10243 жыл бұрын
Looking how to get into them as well!
@sendintheclowns73052 жыл бұрын
Any luck with PIN?
@simonadams41122 жыл бұрын
I changed the board in the heater and the controller to the common type ,only cost£12 for them both.
@RhysOrwin2 жыл бұрын
@@simonadams4112 Does yours now turn on and off based on temperature. The problem I've got is that it just stays on past the set temperature.
@simonadams41122 жыл бұрын
@@RhysOrwin yes mine does to change it from temp control to manually controlling the pump speed ,press the Both top button one on right and one on left you now can control the pump speed ,to return to temp control press both top button again.
@andrewbrown652210 ай бұрын
Im trying to find an icon guide for these.
@kerrygrozier74642 жыл бұрын
Thanks for your attempt to decipher BUT you only got part of it right and should note that the instructions I recieved with my heater recieved a month ago warn NOT to use the "Alpine setting often" its referred to as Plateau setting. It says that you can damage the system .......... no idea why???? They seem to be good little heaters for the $ but the support side is abysmal especially the instructions ....................... your better without. This controller we have is obvioulsy the cheap one as my friend purchased a different style same $ range but has a controller that is far more intuitive with better options and settings. You get what you get when you go Chinese. Really too bad when they have what appears to be a great product but extremely disappointing support.
@mattsmith20512 жыл бұрын
It says to use the plateau mode “carefully”, whatever that means. It does not warn to not use often. All it does it reduce the pump pulse rate and the fan speed is automatic which adjusts and compensates for the oxygen levels if experiencing high altitudes. I don’t believe there is any reason for alarm as long as you occasionally do a higher temperature burn to reduce and remove any possible build up.
@ru4reel20143 жыл бұрын
Best explanation ever. Cheers luv, from 🇦🇺. I started mine up before seeing vids, and when it was getting to 160 plus Celsius I was scared and shut it down. Now I know , that’s the heat of the heater. So I will try set my room temp , and take it from there. These LCD screens that come with d/heater, are set to 12volt already I believe. I think 🤔 u can adjust the volts, … works beautifully, just concerned with the exhaust, the amount of heat it has. I have wrapped it with exhaust wrap, so I don’t know maybe with the smell due to 1st time use. Can u help me with this. Is this normal.?cheers
@AngryBritain2 жыл бұрын
Exactly what I did this weekend when I thought it was trying to boil us to death.
@daviddollard38453 жыл бұрын
Thank you
@MrTestpilot72 жыл бұрын
great video ugly topper,i have the same problem with my new heater the lcd screen is different. and i have no idea how to prime,set temp,and the hzh mode.can i buy one of the other lcd moniter screen and plug it in will that fix the problem.if not can you make a video showing how to set all of the functions on this one thanks alot i was about to give up on this little heater before it even run.
@ZerHour2 жыл бұрын
Someone mentioned this controller is the old style but I think these are the new type ? Any answers ?
@greghall_The_TechEditor2 жыл бұрын
It is the new style. the older style has the same look but the white type is smaller on the new style.
@collarbone1003 жыл бұрын
Hi there I have the same diesel heater controller, Do you know how to prime the pump? Thanks Russell
@Snailmailtrucker3 жыл бұрын
Pretty sure you hold down the Up and Down buttons at the same time.
@michael7350143 жыл бұрын
I need to know that cheers
@collarbone1003 жыл бұрын
I found out its the on button and down button at the same time. You have to hold it all the time till the fuel comes through to the diesel heater. Hope this helps
@collarbone1003 жыл бұрын
Sorry you was right it's the up and down buttons at the same time if you let go it will stop priming
@selfian85113 жыл бұрын
I have same model. I had installed in a service in Romania, but now I am in Holland and mine is not stop on automatic mode . I had set it on 20 grade and he heat up the car till 40 and still not stop. Maybe is a problem with temperature sensor. Do you have same problem? He go on lever 1 and still bring heating but not stop totally.
@kennethnoisewater15022 жыл бұрын
This is normal they will reduce heat output to lowest but not stop completely.
@seb42 Жыл бұрын
I have same issue. VERY frustrating, so hot. I don't understand why is not stopping when reach target temperature. Mare prostie
@marianmarinescu4443 Жыл бұрын
Please, please tell me how to pair temote on this kind o controller.... Clasic eays dont work!!!! Pleaseeee cant find any tutorual that works!
@graemeboese14052 жыл бұрын
I got one summer to that but do not know how to pair the remote to it do you no thank you
@darrenhenderson18493 жыл бұрын
just wired up same controller, all lights up but displays no error just circle negative symbol and 3 dashes no numbers & will no turn on HELP!! liked and subscribed , buttons do not seem to operate
@Refertech1012 жыл бұрын
Look inside your controller for a bad solder joint on the controllers board, I had this exact same issue, I just re-soldered the blue wire and 100% functional
@jennypatacsil98212 жыл бұрын
any ideas how to use the remote that comes with it?
@Golo19492 жыл бұрын
I would like to know also, mine doesn't appear to have the wifi icon that other videos say you need to connect it to.
@Golo19492 жыл бұрын
Found it in the instructions
@rubens69312 жыл бұрын
@@Golo1949 where did you find it I've been looking in the booklet it came with can't find it
@mattsmith20512 жыл бұрын
Does your unit mounting plate get quite hot during operation?
@fredfred2363 Жыл бұрын
Yep, sure does. Too much air blowing through the combstion chamber means the exhaust gets too hot. Choking the combustion air feed (at max fan) actually cleans up the burn, increases heat output and reduces exhaust temps. Makes the whole unit more efficient 👍🏻😀🇬🇧
@mattsmith2051 Жыл бұрын
@@fredfred2363 what do you mean choking?
@jimmurphy47032 жыл бұрын
I have this controller but when I turn it on it doesn’t display the 12 v. It has 3 dashes where the 12v should be displayed
@juliogonzo27182 жыл бұрын
Maybe it thinks battery is low and it doesn't like it. It is the voltage I've seen mine go down to 11 while the glow plug was on. Does it run?
@MrPsh-xs7ul2 жыл бұрын
I got this heater. Mine seems to go through fuel faster than I thought it would. I can’t figure out how to prime my pump nor set the clock or anything else. Psh
@dirtyburty6828352 жыл бұрын
Up and down together and hold
@patrykcwik8863 Жыл бұрын
hi what are the codes? because I see you entered 125 and it warms less
@Colorado2Bangkok2 жыл бұрын
Has anyone confirmed a 3 digit password?
@mattsmith20512 жыл бұрын
Does anyone here understand how to select between 12V and 24V on this controller manually? Or is it not possible and auto select is the only preference available?
@mickridley4409 Жыл бұрын
Hi Matt did you get anywhere with this I had same issue
@chiccoka3 жыл бұрын
i tried today to pair with my remote but no luck. Wrote to the seller to provide some info.
@jimmurphy47032 жыл бұрын
I have this controller and I need to tell it 12v how do I h do that .
@anikopasztor10472 жыл бұрын
Helo, how to set the machine to turn off at a certain temperature? Thanks
@kennethnoisewater15022 жыл бұрын
There is no way. Only a "throttle" once the heater achieves the set temperature as described in the video it will reduce heat output to lowest but not turn off completely.
@johnmcmahon31353 жыл бұрын
Does anyone know how to set the temperature with this controller? Mine seems to increase as the heater runs.
@selfian85113 жыл бұрын
I have same problem. You must set on automatic hold the settings 2 sec like in video and can set temp but on mine is heating not stop and never stop. Even I set on 20 degrees he warm up to 40 degrees... anyone have a solution ? Maybe temperature sensor not working?
@stal0232 жыл бұрын
@@selfian8511 I have the same issue so doubtful it is your sensor.
@jond15362 жыл бұрын
Auto mode has what looks like a old style thermometer (remember the glass ones) manual mode has a weird gear looking icon. if you push the up button the setting after the "6" is the auto mode the press OK and then you can set the temperature.
@greghall_The_TechEditor2 жыл бұрын
@@stal023 Same with my 5K all in one. I set to 20 and the temp reached 27 and it was still operating with full bars. I don't think this controller has a thermostat function that works! It may show the set temp but it ignores it.
@AngryBritain2 жыл бұрын
I also have this issue
@MsGIJew2 жыл бұрын
How do you pair the remote to this style? SOS
@majdidah2 жыл бұрын
Press on and down bottoms OCR1 will appear after that press + on the remote control . Hope this will work with you.
@garyreed3542 жыл бұрын
I have four different kinds. there's not 2 the same even if they look the same
@mattsmith20512 жыл бұрын
Can you turn the controller led off?
@Toob41 Жыл бұрын
Only if you fit your own switch on the power line.
@breclohesy99892 жыл бұрын
i have this unit bugger all out there on it, anyone have a manual (that was not the one it came with it)
@Snailmailtrucker3 жыл бұрын
I finally got a replacement Display/Controller unit for my Diesel Air Heater... It came with the E 07 Error Code and only Beeps when hooked up to my heater....my old controller still works, I just wanted the one that I could program. So, I got the Seller to send me a Replacement Controller/Display unit. It has the E 07 Error Code too and only Beeps. I ordered another Complete Chinese Diesel Air Heater too.... It came with a Display/Controller with the E 07 Error Code and only Beeps ! I have a total of 2 Chinese Diesel Air Heaters, 6 Display/Controllers and only 1 complete Unit that works ! *HOW THE F DO THESE PEOPLE STAY IN BUSINESS ?*
@juliogonzo27182 жыл бұрын
I guess there are new and old versions and they have different control boards on the heater. The controllers are not interchangeable.
@oliver90owner2 жыл бұрын
Likely the mother boards are not compatible with the controllers. The mother board for the H 1- H6 is not compatible with the more usual controller on the ‘net.
@alanjm12342 жыл бұрын
How do they stay in business? Their competition costs 10 times as much.
@jasonsaville13613 жыл бұрын
Has anyone figured out how to pair the remote to this style controller?
@Snailmailtrucker3 жыл бұрын
My 4 button Remote doesn't pair to my Display at all !
@jasonsaville13613 жыл бұрын
Ok guess Im not the only one. LOL Also my internal temp and voltage do not display when unit is running. Any thoughts?
@markeaston74613 жыл бұрын
@@Snailmailtrucker check battery,mine came without one,didnt need to pair with heater,just worked.
@markeaston74613 жыл бұрын
@@Snailmailtrucker check the battery
@seanaitken57343 жыл бұрын
Hi I have this control panel too. I cant get the remote to work
@drayduffy31212 жыл бұрын
How do u set time on this lcd display
@stal0232 жыл бұрын
Would love to know this answer as well as I am not having any luck.
@sendintheclowns73052 жыл бұрын
There is no clock, only a timed start and stop. Start in *x* hours or shut off in *x* hours.
@SpikeRess Жыл бұрын
Thank you, there is more info here - kzbin.info/www/bejne/fKndhn6eecp8f5I
@Popeyethesailormk2 жыл бұрын
Has anyone confirmed a 3 digit password for advanced settings?
@reactstuffreact4500 Жыл бұрын
how can there be no password ? seriously. i need to increase fan rpm on the lowest heat setting. this really sucks
@zetamale Жыл бұрын
@@reactstuffreact4500 me too!
@janmessek1826 Жыл бұрын
press the left two buttons for Alpine mode the mountain peaks show up ... this lowers the injection rate of the fuel so you can burn less and at a lower temperature. 1 liter for 10 hours! I also crushed the intake combustion air tube to reduce the combustion air flow and mixture and got it running hotter at the lower fuel rate 106-120C in a cold room. I have lots of heat loss so I made a loop in the exhaust pipe and draw air past it with the room intake hose so that heat doesn't go out the window.