Chinese Diesel Heater New Controller Q & As

[@johndeere1174]

Thank You for making these videos. You explain how to use a diesel heater better than any other video I've seen on KZbin. The "instruction" manuals that come with the heater are useless, and some of the other people who post videos on here about diesel heaters don't explain things as accurately as you do.

[@2005mic]

Thank you. Nice to get this type of feedback

[@RealfishingNL]

Woooow amazing video. No clickbait no ads spamming. A great intro with the times explained. I just knew this was not kid that made this video. Very very very nice. Straight to the point. Great explanation. ❤👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍. Realy these days u dont find a lot of videos like this. Great job 👍

[@vintageretro2562]

thank you for making this vid - i have 2 heaters heating my home ( well the 2 rooms the 2 of us use 90% of the time) - one is the older version and the other is this one - i prefer the older version as you can use secret menus to adjust fan , pump speeds etc etc ...... the new one has none of this ..... but saying that this one works just fine ......... i have it set to minimum all the time , thats all it needs to keep me warm - same for herself downstairs - all good - looking at mixing in filtered used engine oil but will probably make a duel fuel system with a selector valve between tank a and tank b - start up on pure kerosene , after at running temp switch over to 60/40 keresone / oil mix on tank b , and go back to tank a for 10 min before shuidown to burn off all the carbon ....... great vid man , well done

[@heidithomas2229]

Have you a way to synchronize the remote control on in this style of controller panel?

[@TheBioniXman]

I have this type of controller and would like to say thanks for this video. I have modified my controller to work with Amazon Alexa to be able to turn it on and off. May sound basic but it allows me to turn it on with my phone before I get home.

[@2005mic]

Thanks for the reply. I'd love to know what your method is to connect Alexa. I gather you connected a wireless unit to the power button.

[@TheBioniXman]

@@2005mic I used a bit of soldering and some mechanical knowledge. I have tried to document it on my old Ducati blog so that others can benefit from it. I'll give you the link, feel free to copy any of it, including the pictures if you want, for your KZbin channel. I am not an electrician but have a little mechanical knowledge so most people should be able to do the same. ducatistbike.wordpress.com/wp-admin/post.php?post=706&action=edit is the blog post.

[@snow633]

Thank you for posting this, a big help for the diesel heater I just purchased. Would love to see a heater maintenance video.

[@Chimel31]

Quick note about the remote's battery: "27A" stands for the format (more accurately "A27" or "MN27"), not 27 amperes, which would be one hell of a revolution in the small battery world. The "A" stands for "Alkaline" (I think). The A27 is about the same diameter as the AAAA battery but much shorter, and holds only 20-22mAh of capacity, 28 times less than a 1.5V AAAA battery. The higher voltage makes it last longer on low usage.

[@2005mic]

Thanks for the info

[@hangtough503]

Beautiful videos on this. You saved the nightmare of an eBay heater from being returned! Got it all running now. Thank you. D🤙🙏

[@codyschwoch5451]

The first mode that this guy did when it was on those who don’t know it actually did do some thing it turned on a light with a gear circle and inside the gear circle is the thermometer so it’s telling you the inside temperature and it’s to protect the inside temperature, so if it goes to a certain temperature, it’ll shut off without catastrophic failure

[@MrGaw3n]

Great advice you give . My question is my heater turns it self on without touching any thing .I sometimes open my van and it's on draining my battery ? I have change control unit ?

[@2005mic]

If it doing weird things like that I would assume the controller is faulty

[@richardhughes2988]

Cheers pal just got mine up and running in 10mins thanks to your tutorial 👍

[@wesst86]

Thank you very much for this video - theyre not the most intuitive unit. Im curious to know your thoughts on the safety of these units, especially from the persepctive of the checks it go thorugh to monitor for faults, be it during start up or operation. I am considering plumbing the pickup into my vehicles deisel tank, but would like to have a better understanding of any potential risks first.

[@jlindell6532]

great no nonsense . common sense approach video. helped me on my new chinese heater . but mine has an oil pump button above the ok button . it says it the manual it oils the pump but hard to understand the instructions or infact if it does anything

[@Brian-mb9ez]

Very good video for this new controller, thanks for sharing

[@poolyboy81]

Excellent informative video. I was on the verge of goin to check into the nutty ward before i found your vudeo an realised I'd bought a heater with the new but looks the same controller. Much Love 😂

[@jeremywinkfield8523]

Fantastic vid,much more confident with my new heater.Many thanks for this and your previous vidio.

[@MGDooby]

What does the red circle with the red dash mean?

[@kellygb9278]

Power is available but unit is off

[@clever-option5707]

Can the heater also be set to turn off when the desired temperature is reached, and turn on again when the temperature in the room has dropped too far?

[@marcp4313]

No

[@bernswonger57]

No, it can only be shut off by the timer. Or manually shut off with off button.

[@bernswonger57]

I'm looking for a way to change voltage from 12 to 24.

[@jamesfritzinger5622]

Thank you for your response. I am still having a problem with the heater running too hot and not responding to the set temperature. The controller is set at 20° and the room temperature is 24. This is been set for over three hours. I am roasting.

[@seb42]

I have the same issue. Did you find a fix?

[@bernswonger57]

The heater will run at a lower temperature,on mountain mode. To do this press set,and ok at the same time for two seconds.the blue mountain will appear, on the screen, then press down button to lowest speed, fuel will last for three days on this setting.

[@Madbiscuit25]

Came here to say similar. I expected the temperature to be controlled automatically by the thermostat. If I want 19 deg c and ambient temp drops say at night the unit responds by firing up then goes back to idle once at 19deg c.

[@thesurvivalist.]

There are 3 or 4 firmwares! I have the same firmware on my blue panel, as you have on your black panel! The remote also allow button combinations too!

[@Gazgrace]

How do you update the firmware

[@MegaEverythingElse]

Something to mention, i think these units auto regulate fuel and air to maintain a 150C case temperature. I have been testing if these units will run on waste oils, and they do. I tested with used motor oil mixed with 30% gasoline, this mixture runs fine around 145C and the machine will start on it just fine. a 20% gas mixture ran fine but the start up was rough in 4C ambient temp, took 2 tries to start, and smoked a whole lot, with this mix id recommend starting and stopping on diesel to get combustion temp up. I also tested 10% gasoline and 90% used motor oil, this ran fine around 140C but eventually i think it made it to close to 150C, i did not try starting on this mix, as i feared it would not start and i would have to re-prime my lines with diesel. I think this unit auto regulates air and fuel because if left long enough, the oil gas mix will reach close to 150C case temperature, even though it starts out lower. I also ran this heater on straight diesel and on setting 6 i only got the case temp to about 150C. HOWEVER, after running my 10% gasoline mix i switched the fuel back to straight diesel and once it went through all the lines i was able to see 190C case temp, then it slowly lowered back down to around 160C. I think this unit attempts to auto compensate for different grades of fuel and it tries its best to get the case temp to be stable at 150C, this process is slow, but i think that is what it is doing. I am trying vegetable oil in this heater next.

[@2005mic]

Very interesting. Keep me informed of your results

[@fredfred2363]

Thanks for the fuel mix data 👍🏻😀🇬🇧

[@dr_jaymz]

I too think that this model does something different than the previous models with the red digits. With those, you have to mess with injection frequency for a given fan speed - but thats a bit silly, if you know the fan speed and case temperature and you can adjust the fuelling then that is far better than putting in bingo values and hoping for the best. Mine runs on diesel only and runs far leaner than the ones other people mess with - and I don't have to mess with it, it runs clean as a whistle almost no deposits at all. So the other day I ran it when it was already warm inside, I noticed it quickly warmed to 200C and then you can audibly hear the fuel rate decrease but the fan stays as it was, the outflow temperature was around 100 and it regulated at around that. I'm not sure if the older designs do that - or at least do it quite as well. From the videos I have seen, people seem to be running them way way too rich just because they can adjust the fuel frequency. You don't want stochiometric ratio, that only applies to fixed volume rather than a flame in a windy tube, besides if they see black smoke or soot build up its obviously too rich.

[@2005mic]

@@dr_jaymz thanks for the info. I'm thinking of doing a video on this issue. The more info I can get the better

[@andrewbrown6522]

I find my 8kw likes tobe at around 190 and thought that was the norm?

[@nixonsmateruby1]

Got mine working but is there a setting that is the best heat for fuel ratio?

[@abdulrahmanbham2138]

Hi what does the - - - v mean ? I’ve plugged diesel heater in a Bluetti with 💯 battery and this symbol keeps coming on. It’s worked many times before but suddenly it’s locked out with the above symbol. I can’t seem to do anything with the buttons. Nothing works atm. Thank you

[@2005mic]

@@abdulrahmanbham2138 try resetting by turning off all power supply for 30 minutes

[@andrewtitcombe8378]

I have an ebespacher heater in my van. If the van reaches temperature the heater slows down until it stops injecting fuel. And just gently runs the blower. My partner has this Chinese version of heater. And it slows down but does not stop the burner . This means it gets to warm in the van. Its a shame there is not a setting to stop the fuel pump at temperature. And start the ignition of the burner when it gets to cold in the van.

[@2005mic]

@@andrewtitcombe8378 that’s one difference between a $2,000 and a $150 heater

[@philprice760]

Do these new controllers not display the time? Also can you set these nee controllers to turn the machine on and off like the old units . Thanks

[@2005mic]

@@philprice760 NO to both questions

[@thomasinnis2370]

Can you/ they make the thermostat control more confusing please?

[@2005mic]

@thomasinnis2370 I can't but they can.... no real thermostat control on these cheap heaters, just a constant heat control low to high. If it gets too hot open a window

[@thomasinnis2370]

@2005mic I'll suggest that to my dogs when I'm away.

[@thomasinnis2370]

​@@2005micI'm genuinely trying to figure out how to get mine into automatic mode. It's stuck in 'manual' and doesn't regulate at all. It's the white housing blue display and it won't let me set a target temp.

[@2005mic]

@thomasinnis2370 not on these cheap heaters

[@2005mic]

@ it won’t regulate a temp. Just runs by constant temp at setting 1,2,3,4,5

[@Deiseboi]

Thank you for yet another great video...I watched your last one with the timer setting but cant seem to work it out..what your saying is, ie set for 12hrs at 9am should come on at 9pm..and set to run 1-2hrs..could you do another video just on timer setting please.

[@2005mic]

Thanks. Will do a timer video soon. If you set the timer it will either come on after the hours set ie 12 hours OR turn off after the set time. Only 1 timer program can be set at a time

[@Mr.Schitzengigglez]

Just got mine running on this newer board, and controller. Runs fine on 24v. Seems to be automatic. Always reads 12v on the controller, but, it doesn't seem to care. I started it with 1 12v battery, and reconnected the positive of my other battery. The heater never even flinched.

[@2005mic]

@@Mr.Schitzengigglez good to hear, thanks

[@backdoc94]

Thank you for the great video. Am I correct in assuming that I cannot set the on timer and the off timer to work in succession. For example, I want the heater to come on in 1 hour for then turn off an hour later when I am away from my caravan. I might want to do this if I know it will be freezing tonight and I want to heat up the interior for a little while in the middle of the night. It looks like I can only activate the on time timer when it is not running and the off time timer when it is running but I need to activate each of these manually.

[@2005mic]

@@backdoc94 that is correct

[@the_sinkthrower]

My temp on the top left stay 34C try lower down using manual but won’t change to 19C. Any help much appreciated.

[@Mike-c6o2y]

My diesel heater has a red controller that went out. Will the black one work on this diesel heater?

[@2005mic]

The screen and motherboard need to be matched si you may need to replace both

[@juliebest8760]

Any thoughts on why my power on off switch won’t work. I have to keep insert /remove the battery to start /stop👎 I used to on off with the remote but since changing the battery in the remote the remote doesn’t seem to talk to the main controller

[@juliebest8760]

Don’t mean the battery I mean I have to insert or remove the fuse to start stop

[@2005mic]

See my other video. It explains how yo pair the remote

[@miltondejesus2076]

How do I change the fuel pump volume? I have this same display

[@2005mic]

@miltondejesus2076 you need to cover it. Wrap it with some sound proof material

[@miltondejesus2076]

@@2005micgood one-

[@duncanmunday4735]

On this type of controller do you know how to put it into Hz mode as i need to connect it to a separate water heater controller

[@2005mic]

See my other video

[@nico_no8597]

Hi, Can the heating stop by itself ? No sound when I reach the correct temperature ?

[@2005mic]

It should regulate and keep at the set temp but won’t turn off when it reaches a certain temperature

[@NewLife-qj9mx]

Omg ive been pulling my hair out trying to figure out why i cant figure out my controller - didnt know until i found your video that theres a newer model that looks the same but operates differently 😣 Thank you so much for posting this 🙏

[@captainsensible3570]

Same control panel as I've just received, did you manage to pair the remote please as I'm having no joy what so ever 🤔

[@captainsensible3570]

Found it in your other video 😂 thanks mate as all up and running now 👌

[@2005mic]

@captainsensible3570 no worries im pleased the video helped

[@sibfishingadventuresuk1558]

​@@captainsensible3570 what video 😅 same problem

[@yunp2449]

Hey i cant figure out how to set an automatic timer, is that even possible with these new controllers? I hwve exactly the same as you

[@2005mic]

It's explained in my other video. Only 1 timer function can be set

[@tarsneyisleestrelas4659]

Hi the heater i have is the upright all in one,its up and running but i, struggling to set the thermostat so it switches off at say 20c, help cheers.

[@2005mic]

Can only switch off after a set time, not available for temp switch off

[@tarsneyisleestrelas4659]

@@2005mic ok so I need to set the clock and use the timer to turn it on and off at set times. Thank you have to set the clock first. Cheers for your help 👍.

[@2005mic]

You can only set 1 timer. Either on timer OR off timer. Not both

[@bernswonger57]

​@@tarsneyisleestrelas4659 this model has no clock, just a timer. You can only set it to go off after a set amount of time, if its running. Or to come on if its not running, but not to come on, then off, only one at a time, I know!!

[@mikeminderlein297]

Does the remote need to be programmed prior to use?

[@2005mic]

No. Should work out of the box

[@erikheladagen796]

if I want to order a new control for my burner, (3 years old) does the new type of control have a type number and how do I know that it fits the burner?//Erik

[@2005mic]

Best off buying a matched motherboard and controller only a couple of $ more. As Could be the mother board

[@erikheladagen796]

@@2005mic That is the disadvantage of ordering from "wish" you do not get information about the type and number of what you are buying, in this case the diesel heater and the control.//Erik

[@2005mic]

@@erikheladagen796 go to Aliexpress.com and search "diesel heater controller" just buy a matching motherboard and controller. They should all work with the heater itself.

[@coco9004]

I would like to know why my controller do not show the voltage? I only see 3 bars and that it? also I tried to push the buttons for diesel pumping and then after i tried to start. it doesn't work. I cannot see anything moving. I cannot browse the menu. The only time I see something was CO-1 for remote control pairing and that all. The battery is fully charged and it is a deep cycle battery for rv and not used at the moment. and it is a 95 amps hour deep cucle group 31D. also the engine and diesel pump does not any noise. is it deffective unit ?

[@2005mic]

Probably the controller motherboard is defective. There have been many defective motherboard

[@CjTriker]

hi , how long did you have to prime before the fuel reached the pump ?….also I have the blue controller and it appears to do exactly the same functions as your black one and the little blue icon by the air intake is exactly the same as yours but there are other blue controllers that function differently with a slightly different icon .

[@2005mic]

They self don't prime that well. You need to get the fuel to the pump, then prime from pump to heater

[@johnwilson1620]

Can you fine tune the fuel/ fan ratio on this controller?

[@2005mic]

No you cant

[@andrewbrown6522]

Im looking for an icon guide for this unit.

[@my_carp_life3424]

Alpine mode or a 16ml pump might help with tuning these for less fuel to help with less soot in the burn chamber.

[@eianmathieson5499]

I have what i think is this new controller but my fan blade image does not rotate- but heater works well- have you come across this?

[@2005mic]

No i haven't but anything is possible with these heaters. As long as it works

[@jasonspowart371]

I recently purchased a diesel heater, but I can’t work out how to prepare the remote to it and it’s got the circle with a lightning like that one you showed on display

[@2005mic]

The video explains how to pair the remote

[@2005mic]

It's in my other video about diesel heaters

[@tessandmax1]

hi have u had any problem with the controller going faulty and doing in the fuel pumps as i have had a near new pump go faulty so replaced with new one and it has stopped working as well so tryed new controller and pump and all seams ok . would love feed back on this problem and if i can replace controller with old stile unit .

[@2005mic]

Mother board and screen are matched so can't swap different with ones but most matched pairs should work with most heaters

[@tessandmax1]

@@2005mic thanks for replying, but do u think that a controle panel could make 2 pumps go faulty , i am baffled by this problem, i have had heaters with the older controlers and had no problems at all.

[@2005mic]

@tessandmax1 the quality of the new controllers I don't think is the best. Most work just fine but lot of people have issues and strange ones at that so I wouldn't be surprised if it caused your issues with pump

[@nixonsmateruby1]

So if you have it on H3 can you put it in alpine also, to slow fuel use?

[@2005mic]

Yes

[@jamesmott3196]

After priming, I turn the power on and then it shuts down and powers off after a few seconds. Any thoughts?

[@2005mic]

That’s a new one. Any error codes come up?

[@jamesmott3196]

No error codes. I primed the pump, hit the power button then tuned off after a couple of seconds

[@rathsacks]

Had the same problem because my 12V battery was VERY old and too weak to power the heater. Bought a new 12V and the problem was resolved.

[@AD-dx7lr]

We have this controller and your vids are so helpful. Do you still need to start this heater on high to burn off any residue? I’m a little confused as I know it starts up in manual mode then we switch over to auto.

[@2005mic]

Probably best to do so upon start up

[@ScottandJodi]

VERY useful, thank you. How does the "Alpine Mode" function for actual alpine altitudes--6,000--9,000 ft? In the USA mountain West, such altitudes are common. Thanks!

[@FrostyFingers]

So, on the new one I cant adjust max/min fan speed, hertz pump etc????

[@2005mic]

No we can't

[@jamesfritzinger5622]

How do I get my heater to stop at the set temperature? In manual or automatic the heater continues to pump fuel and heat. 6:10

[@2005mic]

They are slow to react. It auto mode it will probably go over temp but then slow down about 5 minutes later

[@robertoroby4507]

Hello , for this tipe of contoller i have an error E-2. COULD YOU TELL ME PLEASE HOW TO FIX IT? THANKS

[@2005mic]

E2 is a voltage error. the heater is not getting the correct volts. Volts could be to high or to low. Make sure it is 12v and your cables are large enough and short enough so there is no voltage drop. Check with multimeter when trying to start heater

[@bdstores826]

Hi what is the symbol that is circled In the picture on the video before you start

[@2005mic]

It's just an identification symbol. Doesn't really do or mean anything

[@aust4105]

One option for a controller is simply a rotary knob with an LED on top for errors. But I did not realize that the lowest it will go is 2 hz, or I would have gone for this controller. At the temperatures I am in, I only need 1 hz, so 2 hz is using twice the fuel I need to use.

[@patricgrape7458]

do you know if there's a way to reprogram the heater down to 1 Hz?

[@tomyocom5886]

Hi, Have you ever gotten 3 lines and a smal v.......... like this. - - - v On this controller. Just lights up when i connect to battery and no buttons are responsive. Instead of P12 v it show the lines and v. So I can not use the heater at all. Suggestions? thanks so much.

[@kazzr1]

Do you know how to fix E-02 over voltage?

[@2005mic]

Could be a faulty temperature sensor, otherwise a faulty motherboard. Have a look through the following link. myrigadventures.com/chinese-diesel-heater-problems/

[@lucacavallini561]

how i can reset the remote control pair for use in another identical display?

[@2005mic]

Just pair it on the new one

[@oliver90owner]

A very useful video. On mine I just use the timer settings, mostly. Usually the auto turn-off after the set time. It allows me to run it for the set time after leaving the area. Good for a heat boost on a cold night with just a quick trip to the heater to start it, select pump speed (usually H 6) and select the timing mode (a one hour run has been adequate thus far). Then lock up and leave. Top two buttons on the controller (I think, but not sure) select the timer mode when running. They must have programmed the minimum pump speed (5000 strokes per hour seems usual - 50 strokes in 36s or 1.4Hz) and the maximum stroke rate, along with the associated fan speeds somewhere. I am wondering if the motherboard has any means of re-programming these settings? Or maybe the smaller heater is simply fitted with a smaller capacity pump? I have a 2kW ‘small body’ heater which I have not checked out much.. That it works is a bonus, with these heaters.🙂

[@miket6205]

⁸⁸

[@rogerpennington5784]

How do you change from Celsius to Fahrenheit

[@2005mic]

No setting to change. Celsius only

[@taylorknutson1133]

I stumbled upon mine changing to F by holding the up and down at the same time

[@ryanberthelette7926]

Mine was power and up simultaneously

[@CmteGrana]

Please, how to pair the digital remote to the controller?

[@2005mic]

@CmteGrana see my other video. It explaines it

[@SuperrichtSuprt]

I really wish that you had shown how to pair the remote.

[@2005mic]

@@SuperrichtSuprt I think it’s in my other video

[@2005mic]

@@SuperrichtSuprt kzbin.info/www/bejne/fKndhn6eecp8f5Isi=9dyE9-DrNv6iNrg-

[@brownh2orat211]

Is it possible to change it from °C to °F ?

[@2005mic]

Unfortunately not

[@ryanberthelette7926]

Yes! Power and up simultaneously!

[@joshuajaynes88]

What is the circle with the red line

[@kellygb9278]

Power available, unit off

[@claritywithteekay]

Legend! Thank you so much for this man! So so helpful!

[@normanaubrey8485]

Thanks for the excellent update Mic. Your first video sorted me and my new heater. Do you know if this" new controller", can be changed for older or blue controller without changing the mother board( ECU)? Also I noted that in all your video answers you had alpine mode on. Was this necessary? Thanks. N

[@2005mic]

No, it's not compatible with other motherboards. If you want to change controllers, both need to be changed. No reason for alpine mode being on. Thanks for the compliment

[@DirtRoadAuto]

E-2 error. my first battery wasn't strong enough for the glow plug. i switched to a big car battery and no error. hope this helps.

[@stephenkeevins773]

Hi I have the exact same controller but when I try to prime using up and down button screen goes blank and won come on....😢 any ideas ....help appreciated

[@Aileron90]

this means your battery voltage is too low.

[@RayDesmarais]

Got a E8 code. Pump is pumping Diesel. I removed and checked the glow plug and it got very hot. Primed to a point that raw fuel is coming out of exhaust and still shutting down on E8. Screen on glow plug is clean...HELP PLEASE...

[@2005mic]

Check that the fan is spinning freely and magnets are in place and being picked up by the motherboard

[@IcyUuUu]

E8 is also a fuel consistency issue if you have incremental issues with the pump not giving the acceptable flow rate over time air builds up in the lines and you have to do a mini prime to get it going up to temp again

[@CALLAGHAN489]

I have primed my unit after not been using it during the summer ,plenty of air bubbles in the fuel line , it took a while to release them . The unit is starting up , running & pumping out cold air & the exhaust putting out white smoke. It will then put E8 on the display. Is it possible I’ve over primed it ? Any tips to rectify this please Great video , well presented.

[@dodtaylor4975]

I have an e: 01 code coming up every now and again what’s the problem?

[@2005mic]

www.aclsretail.com/support-request/heater-error-codes

[@kenso.1]

Can you point me to, or do a video of how many controller iterations there are or have been and their respective timelines. If I ever want to upgrade I would like to know which may be compatible without rewiring the board, or how-to rewire the controller.

[@2005mic]

I'm working on it

[@rbleegrip]

Hi great video although my controller is exactly the same I do not have a picture of the mountain you have too right of display ?, also ambient temperature says 31c, but it’s not it’s only 22c outside 🤷‍♂️

[@clever-option5707]

I set the controller to oc1 but the attached remote control does not make contact. Does anyone recognize this problem?

[@cfh4201969]

I noticed on this newer heater the fuel pump pulses fast no matter what temperature I set it. And consumes twice the amount of fuel my older heater does. ??

[@2005mic]

Mine slows and speeds up as required. May be faulty

[@deursloten]

Hallo het rode stekkertje zichtbaar op mijn controller wat betekend dat?

[@paulcairns5702]

Can you turn bluetooth on in controller

[@2005mic]

@@paulcairns5702 doesn't have bluetooth

[@davidkelly2405]

How do you change language on controller; as mine is in Chinese

[@Propelled]

I wish it were programmable for time of day use for automatic temp and run times.

Really helpful video. Just installed our new heater and could work out how to turn on and off but nothing else. This has helped tremendously 🙌🏻👏🏼

[@pj11633]

Great information, can you show how to set the time/clock and the timers? Thanks

[@2005mic]

Timers are explained in my 1st video. There is no settable clock on this controller

[@2005mic]

kzbin.info/www/bejne/fKndhn6eecp8f5I

[@ilpiccolodiavolo-o6f]

😈👍...Hi..I bought it for my garage, it works great,.thank you.!!

[@imnoexpert1736]

Hi very detailed explanation thankyou..just fitted heater and get error 2.. its connection to 12v battery

[@joshcrawford4296]

I have this same problem. Did you ever figure out a solution to this issue

[@fathergratwick]

Increase the voltage or battery size the "P" setting has to be 12 not 11 or it will error out in a minute or so. Battery also must be capable of outputting at least 8 amps

[@182Outdoors]

How do you get to the "p"menu?

[@markirish7599]

I have one of these heater control panel and i cant pair the remote .any help would be greatly appreciated

[@2005mic]

Have a look at my other video. It explains how to pair remote, timers, etc

[@markirish7599]

@@2005mic thank you. I watched your video and my remote is working perfectly. Much appreciated 👍

[@stepan113]

Hello, it melts to a maximum of 90-95 degrees Celsius. I don't know what to do, I can't set anything. i At full power it seems that the fan is running at full speed but the fuel pump is running slowly .. Thanks for the ideas

[@Gazgrace]

Mine scrolls past 1-6 never a heat temperature. It just cycles straight through. Wish it would stop on 1 or 6 when using the remote i never know what setting its on without looking

[@meirionthomas9114]

How do you pair the remote please?

[@2005mic]

My other video explained it

[@seb42]

My heater does not stop when it gets to set temperature. For example: 1) Trailer is at 14C 2) I set temperature to 20C. Heater turns on and heats 3) Trailer reaches 20C. Heater goes to minimum setting but does NOT stop 4) Trailer temperature keeps rising to 25C+, very uncomfortable. How can we have the heater turn off or run fan alone when reach desired temperature?

[@2005mic]

The heater won’t turn off until you turn it off. It is quite slow to react to temps so try setting to a lower temp

[@seb42]

@@2005mic ah that's the issue then. Even when in the minimum setting, it's too much heat. I was hoping heater would auto turn on/off as needed

[@sicktattoobro]

​@@seb42 leave a window partially open

[@DomDom-mo9wo]

Hello, super vidéo Avez-vous trouvé le code pour rentrer dans les paramètres ? MERCI 🙏

[@magdkhelaly7049]

My heater gives me an E08 code, it starts and then stops working with the code, how can i fix it?

[@mikecafik6500]

Thats a fan code. Most likely the ecu which has the magnet sensor is not clipped in properly on both sides or the fan blade and needs to be adjusted closer - hope this helps

[@DirtKillerNI]

Setting button is not working on mine. What can i do?? It is totally without function.

[@TEM00ccc]

The new remote control with OLED display has 2 x AAA 1.5V Micro LR03 cells. WTF A27 or A23 that annoys everyone. OLED display remote control (433Mhz) should be / is compatible with the new controller according to the operating instructions. It is cheaper to buy an OLED display remote control than A27 batteries. I use two old 1,2V Ni-MH... Thank You for the Video!

[@wilvandendoel6782]

This controller is worth nothing, at full power the housing gets to 210 degrees and than it starts to derate te pump frequency in an irratic way to limit the temperature, not a very elegant way. I swapped the motherboard and controller with the old type and adjusted the advanced settings, runs perfectly fine now. May be the factory is able to tune the heater with this controller, mine was not properly tuned, way to much fuel.

[@dr_jaymz]

what do you mean erratic? Mine adjusts it to keep between 200 and 210C. It seems to be spot on without any soot so its obviously not too rich. I live at 300ft above sea level (which may affect the ratio) and perhaps the single most important thing is the high difference between the fuel and the heater. Mine is about 3ft. I mention that last thing because if you activate the pump at 3ft for a 28ml pump you get 28ml of fuel for 1000 ticks. If you have more than 3ft you get less and below 3ft you get more fuel. If you gave -3ft the fuel actually doesn't stop and floods it. The newer unit certainly does auto regulate and if you think about it it really does have to because there are so many factors. It doesn't really have any excuse, it knows the temperature of the casing and it knows fuel amount and fan speed so the only thing it can't know is how much restriction there is on the inlet and outlet.

[@wilvandendoel6782]

Yes , it is doing that, it changes the frequency all the time to keep the temperature in that range, yes, you get the maximum amount of power, but thats not always wat you want, if you don’t need that, its nice if you can lower the amount of fuel to your needs, the heater also burns cleaner this way if I look at the amount of CO, thats why I like the old controller more. For the rest, it works fine as it is, there you are right.

[@oliver90owner]

@@wilvandendoel6782 the pump speed and fan speed must be correlated, or the carbon monoxide or excess air would be all over the place. The temperature in the casing is not a control sensor, per se. It is a feed-back to the ECU to determine flame or flame-failure and as a top limit to prevent heater damage, nothing (much) more.

[@hawk1481]

What is your elevation? I think that might be your problem.

[@ijsman52]

The heater with this display seems not to get any hotter than 184 Celcius. I've got two more of these heaters, bought 2 months ago, they have blue displays. These heat up to 212 Celcius, of which I'm very satisfied. How can I crank this new one op to at least 200 Celcius??

[@2005mic]

These controllers don't allow for changes in temp settings.

[@ijsman52]

@@2005mic Thank you for your response! So I have to buy a new set of controller plus PCB?

[@2005mic]

@ijsman52 yes. They are not interchangeable. Motherboard and controller are paired units

[@linadsenoj]

I have a heater with the same display H4 or higher gets me over 200C. Running regular diesel.

[@IcyUuUu]

I’ve gotten the new one up to 208 on diesel but when running on petrol it will only max out at 152

[@lucienhikingdroneflying2543]

It’s really helpful 👍👍👍

[@craig-robinson]

This is so helpful. Thank you.

[@DolphinDiver808]

My heater doesn’t display anything unless I hit the on button and then tries to start up heating can’t stop it.

[@luc743officiel]

Hey, i'm still looking for the admin password (3 pin), does anyone have information about it ??

[@2005mic]

W codes, 678 & 987 but neither do anything

[@hollywoodstarrider177]

What if your display is not working at all. Brand new battery. I'm stumped

[@2005mic]

@hollywoodstarrider177 probably a faulty display, I had the same. Screen and motherboard with replaced