DigiExpress - iPod Touch 4 Screen Installation

  Рет қаралды 915,040

DigiExpress

DigiExpress

Күн бұрын

WARNING!!! - THIS DEMONSTRATION IS BEING PERFORMED BY AN EXPERIENCED TECHNICIAN. ANY ATTEMPT TO REPAIR AN ELECTRONIC DEVICE CARRIES AN INHERENT RISK OF PERSONAL INJURY AND/OR SERIOUS DAMAGE TO THE DEVICE. USE THE INFORMATION INCLUDED IN THIS VIDEO AT YOUR OWN RISK!!!
Visit us at www.DigiExpress.us ##
For Tools, Parts and Professional Installation Services.
Repair and replacement of the iPod Touch 4th generation screen assembly. (Works for original black screen and new white screen).
PARTS: www.digiexpress...
SERVICES: www.digiexpress...
PHONE: 1-800-440-4693

Пікірлер: 1 000
@thedodgeballmanyo
@thedodgeballmanyo 11 жыл бұрын
Now this is a great company, DigiExpress even takes their time and answers peoples questions on here! respect.
@puckoXL
@puckoXL 13 жыл бұрын
repaired two ipods with this fantastic video, howver an important omission is the fact that u need to start by pressing in the upper part of the screen and then clip in the bottom, did the inverse and it broke the screen in 2 in the very final step of the replacement... Anyways good luck to all u watching this!
@01sevee
@01sevee 13 жыл бұрын
I finally got my parts from China. I had already taken the screen off...so i followed the video from that point. I FOLLOWED this video exactly how it shows! EXACTLY. i went slowly and took extra care. I'm glad i did b/c there are lost of little things i could have screwed up. Anyways, I did it all and put it all back together, and it works....PERFECTLY. Thanks to the posters of this video.
@RSIMONIX
@RSIMONIX 12 жыл бұрын
Perfect demo. With your help I was able to make two boys happy by replacing their broken screens. Many thanks.
@ardkeenan
@ardkeenan 13 жыл бұрын
Got to be fair and say that this is the most comprehensive screen replacement tutorial on youtube as it actually shows the reassembly as well as the disassembly. However if I break my ipod when following this guide I am sooooo suing you!!!! My main point of defence will be (as pointed out by MootPoon817) the ridiculously hypnotic porn music accompanying the instructions!
@HazyIndustries
@HazyIndustries 11 жыл бұрын
Few things different with my sons iPod touch that i had to carefully figure out how to get round (probably a difference in the country specs as I'm in the UK) but all in all a great tutorial, got me home and dry P.S. 217 people clearly failed to follow your instructions lol
@afletcher44
@afletcher44 12 жыл бұрын
I just ordered the kit to fix this. I will be watching this video to do my step-by-step, I hope it works. My kit should be here Thursday.
@norbclementerodrig1
@norbclementerodrig1 11 жыл бұрын
Followed CAREFULLY and step by step this video, screen successfully replaced in my first try. THANKS A LOT!!!!!
@DigiExpress
@DigiExpress 11 жыл бұрын
This is the best and most proper way to do this. It seems like a lot and like it can take a while. However, the more electronics repair experience you have, the less time it takes. If you're not exactly sure on what you're doing, take your time and be very careful. Anything not done properly can make the device completely unusable and unrepairable.
@DigiExpress
@DigiExpress 12 жыл бұрын
It takes a lot of patience. Our techs have been doing this for years, that's why they make it look so easy in the video.
@afletcher44
@afletcher44 12 жыл бұрын
Attaching the LCD connector was by far the hardest part. I had to walk away and do something else for awhile it irritated me so much. Finally, after attaching it correctly and following the rest of the video I've completed the repair and it works perfectly. The only thing that I wish was a bit different is that the screen sticks out a bit more than what it used to. Unsure how to fix that, if I even can. I'm too afraid to open the whole iPod back up again to try. Thank-you for this tutorial.
@MrMaddoxd
@MrMaddoxd 13 жыл бұрын
Good instruction. He did forget about the metal clip. Followed it carefully, got the gray screen as some have described. Pressed 'lock' + 'home key' + 'up volume', & icon screen came up! Took me about 4 hours, since I took it apart twice. Some of the screws are different lengths, so keep them in order.
@Jaagerboomb
@Jaagerboomb 12 жыл бұрын
This video was excellent! I followed it exactly once I bought the parts and the fix worked perfectly!
@rignadkistn
@rignadkistn 11 жыл бұрын
Busted my Ipod Touch 4th gen screen... Bought a new screen from DigiExpress... Followed the video, did the repair... IT WORKS! Thanks DigiExpress!! But... this is not for the faint-of-heart -- it takes some serious dexterity, lots of patience, and a verrry gentle touch. Did need that hard reset, would be nice if that was in the video. Only bad thing -- that drumbeat drone on the video is ANNOYING !!! Oh well it works so I'm happy!
@DigiExpress
@DigiExpress 13 жыл бұрын
@WorldlySurvivor The copper is used to aid in cooling the iPod. The copper is used on either side of the battery. It is attached to the backplate underneath the battery, with a small "heat sink" (made of some poly material). On the top side of the battery, where you are working, it is used to simply help cool the battery. If you cut it, as shown in the video, you still retain the copper. You'll probably want to keep the copper and reuse it. Hope this helps, thanks for viewing
@DigiExpress
@DigiExpress 11 жыл бұрын
No problem. Glad we were able to help out!
@JackSimsen
@JackSimsen 12 жыл бұрын
Followed your instructions, a few fiddly parts but Ipod working perfectly!!! Thanks man :)
@playaman1337
@playaman1337 11 жыл бұрын
i had that experience before i took it to an i repair kiosk and they said that the person working there said that it the adhesive that keeps the screen connected to the ipod wasn't installed firmly enough. He also said that the screws ( you'll see at 3:40 there are screws along each side inside of the iPod) weren't screwed in all the way and that had effected it as well.
@DigiExpress
@DigiExpress 11 жыл бұрын
Glad we were able to help.
@vargasbill2
@vargasbill2 11 жыл бұрын
Thanks a lot! I was a little nervous but with this video I can fixed my iPod
@DigiExpress
@DigiExpress 11 жыл бұрын
You're welcome!
@DigiExpress
@DigiExpress 11 жыл бұрын
Thank you for the kind words. As for your question, we have companies that come in and take our damaged parts for just that purpose, but no one here performs that. The screen replacement we sell and use is actually the same one that Apple uses. We get it from the same manufacturer as Apple, and the screen and lcd come as one molded component.
@DigiExpress
@DigiExpress 11 жыл бұрын
You're Welcome!!! Glad we could help.
@DigiExpress
@DigiExpress 11 жыл бұрын
You're very welcome! Glad we could help!
@narkeishiajohnson722
@narkeishiajohnson722 11 жыл бұрын
Thank you for your reply. I am not sure what the problem is but hoping it is only the battery. I went to your website and paid for the Ipod Diagnosis and Repair Service so I can know before I order.
@live2skate4
@live2skate4 12 жыл бұрын
Thank you so much for this video. It was incredibly helpful for me. Do you know why the top lock button and side volume up/down buttons don't work for me now though? Thanks in advance!
@FrostyBallz493
@FrostyBallz493 12 жыл бұрын
@DigiExpress you guys are awesome .your repair prices are cheap
@brr404
@brr404 12 жыл бұрын
Thanks for the video! My screen is now flawless :)
@backhowell
@backhowell 11 жыл бұрын
Hi, great video (I love the patience you have for some questions). I purchased a screen only off ebay. Is there a way I can remove the LCD from the current cracked screen and put it on my new glass?
@DigiExpress
@DigiExpress 12 жыл бұрын
If it's turning on and shutting right back off, make sure you didn't damage any other cables or the logic board itself. Sometimes with white screens like you're describing, a hard reboot is all that is needed to make it work. That is done by holding the home and power button down together until the device powers off and continue holding until the apple logo appears. Also, verify that all of your connections are tight. If those don't work, we can take a look at it for a $25 fee.
@DigiExpress
@DigiExpress 12 жыл бұрын
It's possible that there is something under there, a small piece of glass or old tape or something. It's also possible that the screen could be a little warped and lifting up in the corner. No matter where you get the parts, some screens may end up like that. The other option could be to try a stronger adhesive or tape in that corner to hold it down.
@DigiExpress
@DigiExpress 13 жыл бұрын
@niraj007pant Between 11:00 and 11:30 the technician shows the metal shield that you must screw into place first. Then you apply your double sided adhesive strips to that same metal shield as well as the edges and corners. Peel back the remaining paper to expose the adhesive. There is no snapping for this model, the adhesive is the only thing holding the screen to the device. The back plate does have a plastic surround, but that surround is not removed or replaced when installing a screen.
@TheJonasN
@TheJonasN 13 жыл бұрын
Hi good afternoon friend, I would like to know about some of the double-sided adhesive .. how it works? because you remove them and close the ipod without? I could not hear because I have hearing problem and not clear to me .. You put on the adhesive and remove glue residue from getting well? Or do you just removed because it was a demo video?
@DigiExpress
@DigiExpress 12 жыл бұрын
Yes, you are correct. Most of the 'screens' on ebay are just the digitizer which are not the correct replacement part for your iPod. The iPod Touch 4th gen requires a complete screen assembly (LCD + digitizer) , unfortunately people order these 'dummy' pieces of glass and can't get their money back. The complete assembly is $49.99 because it includes the glass digitizer and the 'retina' LCD screen, the parts on ebay are mostly defective or incorrect replacements.
@banksamm
@banksamm 8 жыл бұрын
Hey tnx for this - just enough clear detail & instruction to give the replacement a try (was lucky to have 2 units, one with a working screen but fried circuit board - the other only a cracked screen so perfect for the screen swap)...appreciate the help :-)
@dragonking700
@dragonking700 13 жыл бұрын
do you need to add more adhesive, or could you just heat up the previously used adhesive to put the new screen on?
@KHerget74
@KHerget74 12 жыл бұрын
My son has an iPod 4G and his screen is shattered / cracked some on the top left side corner of the iPod. Everything still works great on it and he still uses it. I just wanted to know what all am I needing just to replace the glass and tools to do it if needed? Thank You
@DigiExpress
@DigiExpress 12 жыл бұрын
The thin cable near the volume buttons is the Power / Volume flex cable. When removing the metal mid-plate you do need to take care. The plastic tool should be inserted above the cable, but below the metal mid-plate. Then rock it back and forth gently, this will separate the metal plate from the cable. Once separated you will then see the adhesive strips on the logic board that were keeping the metal plate held down. Also, the adhesive holding the metal plate to he loudspeaker is very tough.
@janiceamar580
@janiceamar580 11 жыл бұрын
i had experienced it and brought it to an apple repair center, they fixed it and said its about the electrical aspects.. if its under basic warranty, 1 yr after purchased, its free of charge
@Francoxyzm
@Francoxyzm 13 жыл бұрын
Hi, the copper wire that covers the digitizer connector, does that do any function or is it for protection of the connector. My i pod does not seem to have that. Can i purchase just that? Also do you have any tips on connecting the LCD connector. Thank you, your help is much appreciated.
@DigiExpress
@DigiExpress 12 жыл бұрын
Great question. The answer is yes, the screens are the same and fit the same, the only difference is color. And the great thing with the iPod Touch 4 is we actually carry a line of alternate color screens that work the same way. The colors are listed on our website under the iPod Touch 4 parts section. Our website is in the video. The color screens cost the same as the standard white and black, $49.99. If interested, we can also do the install for an additional $25 and have it back in a week.
@DigiExpress
@DigiExpress 13 жыл бұрын
@cerealandtoast make sure your metal shield (mid-plate) is not off center. There is a lip near the LCD port that could stop you from seating the cable, a little push with a spudger (plastic tool) should do it for you.
@jeramemedina4088
@jeramemedina4088 9 жыл бұрын
At 5:35 I happened to tear the ribbon cable and idea what ribbon cable that is and is it an easy fix
@OneCupOfCoffee204
@OneCupOfCoffee204 8 жыл бұрын
As usual, these videos give you just enough information to get you in trouble. Unintentional as it may be. There is no mention of the plastic strip around the outside of the screen between the metal case and the glass. Stay on the inside of the plastic with your tool but be careful not to go in between the glass and the LCD as they are sandwiched together. Great video though. Keep up the good work.
@WorldlySurvivor
@WorldlySurvivor 13 жыл бұрын
What is the copper sheet on the bottom of the metal shield shown at 5:47? It is connected to the motherboard and you seem to tear it free when you take the the shield off. All of the instructional videos ive seen dont discuss this item and everyone seems to tear it apart.
@RandomStonerGirl
@RandomStonerGirl 11 жыл бұрын
it's been a week since it arrived to you guys. I don't even get to have it on my birthday. Hope it gets home soon :( @DigiExpress
@DigiExpress
@DigiExpress 13 жыл бұрын
@natnalexfan11 The microphone is attached directly to the logic board itself. There are no leads for wires, it is surface mount solder that holds it in place. We currently do not stock the part, but the microphone is located on the "underside" of the logic board near the connection port for the front facing camera.
@DigiExpress
@DigiExpress 12 жыл бұрын
Great to hear! Thank you for watching!
@DrowsyBean
@DrowsyBean 12 жыл бұрын
without adhesive won't the new glass come off? or do replacements have a different way of staying on?
@DigiExpress
@DigiExpress 13 жыл бұрын
@ntsuabvaj1 I think you may be mistaken. The Apple warranty does not cover physical damage. If your iPod has a manufacturing defect, then they may replace it within the warranty period, but any physical or water damage voids the warranty.
@DigiExpress
@DigiExpress 13 жыл бұрын
@MACs4GoodPeople The screen assembly (includes as one unit, the glass, digitizer and LCD) can be removed from the backplate withouth scratching the backplate. Inside the iPod Touch 4th gen, there is a mid-frame made of plastic that lines the inside of the backplate. This mid-frame is not removable from the backplate, however it sits about 2 mm above the backplate. So if you have a device with a defective internal part, we can replace the internal part without damage to the backplate.
@bubbles4good
@bubbles4good 13 жыл бұрын
How much would it cost to replace the screen? It still works fine, i just have a hole in the upper left hand corner. Your website says $25, but is that for a replacement screen or for a diagnosis? Thank you
@DigiExpress
@DigiExpress 13 жыл бұрын
@MrSlamhappy That is your loudspeaker. The blue wire is neg and the red wire is pos. If you replace the loudspeaker, you should be fine. The adhesive Apple uses when manufacturing the devices seems to be getting "stronger". We sell the loudspeaker for $19.99 (currently) and can install it for you for $25.00, though generally you just need to remove the rest of the logic board and battery; then you can get access to the area that needs to be soldered.
@DigiExpress
@DigiExpress 12 жыл бұрын
You also need a pry tool. Something very thin, yet strong to seperate the screen from the device. Some of our technicians use a putty knife. Others actually use a specific tool for this repair. But you have to be very delicate with it so you don't damage anything internally. Also, with a blow dryer, you're going to need to heat the edges a little longer than what you would with a heat gun, just because it doesn't produce as much heat.
@DigiExpress
@DigiExpress 13 жыл бұрын
@TristanRHeitkemper the screw driver is just a recommendation, if you would like to use a straight blade then you could do that as well. Even a plastic spudger would work, if it is brand new. There have been over 70,000 people who have used our service to repair any Apple iDevice, of which the iPod Touch 4th generation screen repair is our most popular repair. Probably because of the way the iPod Touch 4th gen is designed, seems to be a bit more fragile than the previous generations.
@DigiExpress
@DigiExpress 13 жыл бұрын
@anthonyhigdon422 the iPod Touch 4th generation has a screen assembly that contains the Glass, Digitizer and LCD. The glass is a just a heavy duty surface, the digitizer is what translate the location of touch and the LCD produces the images. The screen assembly contains these parts as one unit.
@DigiExpress
@DigiExpress 11 жыл бұрын
Was the old screen just broken, or did it go black and that caused you to change out the screen? If it was a cracked screen and working before, then it sounds like the new one, and even the old one, when you put it in, it could either be a bad connection, or the board may have been damaged.
@DigiExpress
@DigiExpress 13 жыл бұрын
@eag402home You'll have to re check your ribbon cable connections for the display assembly. You may have not connected the ends to each other, or loosely connected. It is difficult to re attach the ribbon cables on this unit but you may find this to resolve the issue. When you are checking the connections, inspect the copper colored pieces as well as the logic board itself. The port to which the display assembly connectes may have a gold pin removed or bent. There is no fix for bent pins.
@millertimeny11
@millertimeny11 13 жыл бұрын
Thanks for the great video. Although i messed up and accidently broke the blue wire to the loud speaker. Looks like many people have made this mistake but no fixes . Any idea on how to fix this. I know it needs to be soldered But its on the underside. Thanks for any help , Milton
@giantraven10
@giantraven10 12 жыл бұрын
what was the sticky stuff you peeled off near the end? Is it essential to have that sticky stuff? Thanks though. I am buying a cracked iPod touch 4th gen from my friend and I want to get it fixed.
@Videos2worshipv2w
@Videos2worshipv2w 13 жыл бұрын
Great tutorial...just replaced the broken screen on my ipod 4
@DigiExpress
@DigiExpress 13 жыл бұрын
@250wanter the white screen can be a couple of things, the first is that the screen is installed incorrectly. Ensure the connections are made properly from the display to the logic board as well as the "copper" tape being complete (this is the ground for certain parts). You can try doing a hard reset then connecting to the USB of a computer, you may see a message to restore the device; which should fix the issue.
@anthonyhigdon422
@anthonyhigdon422 13 жыл бұрын
So You do replace the touch screen right? like the screen In side the iPod?
@DigiExpress
@DigiExpress 12 жыл бұрын
No problem. Glad we could help.
@TheJonasN
@TheJonasN 13 жыл бұрын
Thanks for responding. I get it. now could you tell me how you managed to patch the sides? is required by this adhesive on the sides? I get confused and one I've seen several videos and end of all the video tutor just closes the ipod touch 4 with no patch simply presses. This really works? Thank you and sorry for so many questions
@donut1234ful
@donut1234ful 13 жыл бұрын
do you need to use the heat gun or can you just continue the procedure without the heat gun please reply
@jshcad12
@jshcad12 13 жыл бұрын
what else besides a heat gun and the screen do i need to replace the screen and how much would the tools and screen cost on your website
@DigiExpress
@DigiExpress 11 жыл бұрын
Thank you for the compliment. It's greatly appreciated.
@RasHamz
@RasHamz 10 жыл бұрын
Hey just a quick question, the adhesive tape roll is it the 3M tape that you used in the video or is it something else?
@DigiExpress
@DigiExpress 10 жыл бұрын
It is 3M tape. All of the adhesive we use is from them.
@AviRobear12234
@AviRobear12234 12 жыл бұрын
Also wondering, is the warranty void after you replace the screen, cuz you remove some stuff from the inside?
@DigiExpress
@DigiExpress 11 жыл бұрын
Glad we could help!
@PERTORAMA
@PERTORAMA 12 жыл бұрын
do you have to have the copper cabel when replacing the screen ?
@rayrod354
@rayrod354 12 жыл бұрын
The adhesive, is that all that holds that screen in place?
@DigiExpress
@DigiExpress 12 жыл бұрын
Check that the digitizer cable is plugged in the whole way (it's hard to get eyes on that connection so maybe use a mag glass). Also check the cable itself for any nicks or tears. The ghosting can be caused by not cleaning the frame enough or having some glass dust inside the iPod. Hit it with some canned air and try to use a mask so you don't agitate your lungs (glass dust and all). The metal mid-plate may be riding too far toward the top of the device, but it's difficult to say specifically
@ro30tjman
@ro30tjman 12 жыл бұрын
Great video, it helped alot. I just repaired my ipod screen
@excursion95
@excursion95 13 жыл бұрын
hey what size screw diver did you use? for the screws?
@RandomStonerGirl
@RandomStonerGirl 11 жыл бұрын
It's in shipping? Does that mean it is being shipped back to me? Well anyways thank you so much :) you made me really relived! @DigiExpress
@DigiExpress
@DigiExpress 13 жыл бұрын
@Tablo0213 To maintain a working display you do need to replace the part with a screen assembly (Digitizer and LCD). If you would attempt to seperate the original parts, or replacement parts; you would damage one of the two if not both. The LCD is attached to the Digitizer using an adhesive that will not separate cleanly. Replacing the screen assembly (LCD and Digitizer) is the only way to repair it properly.
@DigiExpress
@DigiExpress 13 жыл бұрын
@qzthe1 I suggest checking the connections again, ensuring that all the ribbon cables are seated properly. Generally the ribbon cable is connected on the top "half" but not on the bottom. The ribbon cable connection is a rectangle and so the half's statement above means for the upper and lower portion of that ribbon cable connection. If you had purchased the screen from us, call us and we will help you. If you purchased the screen elsewhere, consult the supplier for a return policy.
@DigiExpress
@DigiExpress 13 жыл бұрын
@iOSRider4983 Light Emitting Diode? You probably meant LCD (Liquid Crystal Display), and this tutorial shows you how to replace the screen assembly which includes the glass, digitizer and LCD in one unit. There is no other way to repair the screens. There is no way to replace only the glass or LCD or digitizer, this repair must use a screen assembly.
@DigiExpress
@DigiExpress 13 жыл бұрын
@waldonoobs The ribbon cable for the volume and power button can sometimes be "stuck" to the metal mid-plate. If this happens you just need to take great care when removing the mid-plate. Even shooting it with a heat gun (1500 watt @ 800 deg F) for about 2 seconds at a time should help greatly. However, do not use more than 2 seconds of direct heat at a time. The video is a basic repair that is more commonly what happens, there will be certain damage that creates new issue. Hope it helps
@kattwilly
@kattwilly 13 жыл бұрын
Had 2 iPods to repair. The first one, a 8GB is working again.. Had problems fixing the second one, a 32GB. Which had a much stronger adhesive holding the thing together. The power button isn't working anymore, what could've gone wrong? I've looked but I can't see anything that has been ripped on first inspectation. Can't really get a good look under the mainboard though. Any thoughts. Where to check for damages?
@tevine580
@tevine580 13 жыл бұрын
Can you replace the heat gun with a blow dryer wand if so how long do I keep it on there
@TheKillacaliboy
@TheKillacaliboy 12 жыл бұрын
do we need to put the copper that goes around the digitizer ribben cable back ?
@DigiExpress
@DigiExpress 12 жыл бұрын
As long as the screen didn't get damaged, then it would most likely be fixable. And that's where I recommend starting. Just start the process of the installation over again and make sure the connection is tight. Test the screen to make sure it works after it's reconnected and before you tape it down.
@tymoor99
@tymoor99 13 жыл бұрын
nice work i followed your steps and mastered it. kool deal
@DigiExpress
@DigiExpress 13 жыл бұрын
@edming27 That image is a stock image, we will update that image as soon as possible. Thank you for pointing that out. The screens we sell in the white color will look just like your original screen. There will be no black dot in the upper corner.
@marcsummers
@marcsummers 13 жыл бұрын
i'm having trouble attaching the new digitizer to the logic board. is it supposed to "snap" into place. or do i just need to hold it in place with the copper ribbon after getting it into place? thanks.
@hadliekelly9747
@hadliekelly9747 11 жыл бұрын
So if I bought a new screen and got all of the tools would some store put it together!?because i don't want to mess up. And if I get a new screen does that mean everything gets deleted on your iPod once I change the screen?
@KraccatiusManor
@KraccatiusManor 10 жыл бұрын
Is it okay if one of the middle side screws along the side with 4 is missing? Also is it okay to leave the protector on the LCD screen and close the laptop up with it? I tried to do this once already and had to order a new screen because I peeled the protection off and went to close the ipod and Im ASSUMING one of the little screws were crooked and it hit the lcd screen. Now Im scared ughh
@NRGearz
@NRGearz 13 жыл бұрын
Could you extend the wifi range by adding length to the antenna?
@RandomStonerGirl
@RandomStonerGirl 11 жыл бұрын
How long does who whole process usually take for you guys repairing it and shipping it back?
@123teepilo
@123teepilo 13 жыл бұрын
Where do I get that specific tool... The silver one he uses in the beginning to remove the broken screen? I order some tools off of amazon. But it was some blue tool and it's not sharp or flat enough for me to remove my screen. The blue tool they sent me isn't working???? Help!!!!!
@rockcar13
@rockcar13 12 жыл бұрын
hey digi do you have a diagram of where each screw goes to hold the metal plate on. i cant find which screw goes where
@DigiExpress
@DigiExpress 13 жыл бұрын
@TheJonasN The tape is a doulbe-sided pre-cut tape. You peel it from the sheet and put it on the device, then peel the other side to expose the adhesive. before you apply the double-sided adhesive you will need to "clean" the frame. removing any and all bits of glass and original glue. The glue that is used by the manufacturer needs to be removed completely before you can begin applying the pre-cut double sided adhesive. I hope this has helped, please feel free to ask any questions here.
@bluegege1112
@bluegege1112 12 жыл бұрын
Thank you for this video.Now my I pod has a screen again.The only problems I had were that the on and off button doesn't work anymore and that my i pod won't close but other than that work like new.P.S it took me 3 hours to do it,but it was my first time.
@DigiExpress
@DigiExpress 13 жыл бұрын
@tonystewartchamp The black and red colored wires lead to the loudspeaker. The ends of the wires get soldered into 2 holes on the logic board. If you damaged these wires you would need to replace the loudspeaker, which we have listed on our website. It is not terribly difficult to solder the wires into place as they are through the board and not surface mount.
@DigiExpress
@DigiExpress 13 жыл бұрын
@FabulousBeauty14 Generally Yes, though there are cases where the damage is greater than just the screen.
@TurboDanDog
@TurboDanDog 12 жыл бұрын
Is the screen replacement a retina screen?
@justinschachter8816
@justinschachter8816 12 жыл бұрын
@digiexpress is it ok if i don't have replacement tape to stick the screen back on, that i put super glue where the tape would be? or is that a really bad idea
@bleblublop508
@bleblublop508 12 жыл бұрын
does the digitieser cable clip on to the connector? or does is just stick?
iPod Touch 4th Generation Screen Replacement
12:59
DirectFix
Рет қаралды 126 М.
DigiExpress - iPad 2 LCD / Digitizer Repair
14:12
DigiExpress
Рет қаралды 702 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
Support each other🤝
00:31
ISSEI / いっせい
Рет қаралды 81 МЛН
Evolution of Dance
6:01
Judson Laipply
Рет қаралды 313 МЛН
I built the Dream Smart Kitchen
22:56
Mrwhosetheboss
Рет қаралды 2,3 МЛН
His Wife Threw his Gaming PC out the Window… Can I Fix It?
19:43
Linus Tech Tips
Рет қаралды 1,2 МЛН
DigiExpress - iPod Nano 4th Generation Breakdown
3:41
DigiExpress
Рет қаралды 534 М.
I Tested TikTok Shop vs Temu Kitchen Gadgets
28:11
Patrick Zeinali
Рет қаралды 175 М.
How to Repair a 4th Generation iPod Touch
7:51
Powerbook Medic
Рет қаралды 646 М.
iPod Touch Screen Repair - LCD Replacement - 2nd Gen
3:53
Repairs Universe
Рет қаралды 562 М.
iPod Touch Take Apart & Screen Repair - 4th Gen
3:52
Repairs Universe
Рет қаралды 432 М.
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН