Do not throw the original cable of the phone, but repair it easily

[@richardweidner1625]

This inspires me to throw away all my bad cables

[@vinodnair09]

😂😂

[@barbarawhitby1916]

😆 🤣

[@NeilJR]

Yes…for the sake of a few bucks why drive yourself crazy with all that fiddling .

[@spalding5198]

For all that drama I I coulda bought one at the 7 eleven around the corner in 10 mins. But thanks anyway-when I’m desperate and have the tools conveniently at hand-then perhaps I’ll remember how to do this.

[@nikhilshukla3320]

Haha

[@genozdaylisan6180]

This video is not for every one , so to those who can afford just leave comment section blank and stop criticizing cause at the end this video is about a good intention to help people and not about boasting of affordability but strategic life ... Just respect guys. GOD BLESS US ALL specially to the person who is willing to help others .. love you all😘

[@irepairofpc31familykartrac51]

Help you burn your house down.

[@Aditya_Music_India]

This is only applicable for non-branded cables. All branded cables are sealed. In this video, the cable has plastic ends so it is very easy to open. Nowadays, the cables ( branded ) have rubberised ends and impossible to open without any damage.

[@solidn6]

His literally using a Samsung branded cable in the video.

[@garywheeler1812]

Those kind probably don’t need repair

[@danhudson4614]

It's a shame they seal them how they do, more people would fix..oh yeah they don't like that. Money over environment and all.

[@celstark]

Do you mean “braided” (metal housing) or “branded” (like the Samsung brand on that cable in the video)?

[@danhudson4614]

@@celstark branded Samsung . Even non official products can be branded Samsung. The ease that this unclipped was not genuine Samsung imo. Braided would relate to the wires.

[@duderoth]

Couldn't think of a simple way to strip tiny wires till now (a lighter). Thanks

[@stefanocb6507]

Ok, this works and, as a general idea, it's quite OK. However, a few details made me suffer considering someone unexperienxed with soldering may watch this video: please do clean the tip of your soldering iron! A piece of (dry) cloth or even paper would go a long way. It would also be better to "turn" (roll) the wires before soldering them. And please use better (wider and more even) spacing among the soldered wires. Interesting trick with the lighter! Please don't misunderstand me: I'm not criticizing, just kindly suggesting. Ciao!

[@johntiggleman4686]

He should not use such a big knife. Get an Xacto knife with a #11 blade. You are no pro at anything. You must have at least 10 different channels, and 99% of you projects are hoaxes. People watching your videos better realize this and stop watching and subscribing. Faker.

[@mariogansbeke]

Soldered like a bricklayer!!! Replace your soldering tip, it's worn. And your solder isn't shining anymore so it means that it is burned.

[@icaigoaqui79]

@@johntiggleman4686 Yes, any knife especially Xacto knifes are very sharp and you could cut the wire covers or even cutting the wires very easily when stripping the main cover.

[@icaigoaqui79]

@@mariogansbeke Soldering tip, very nasty. Good point.

[@a1locc25]

No you were totally criticizing and it's ok because it's well deserved.

[@christianheidt5733]

Bravo 👏, well done! All the crap we throw away, Ridiculous! Thanks for sharing!

[@mohabatkhanmalak1161]

Shucks, just binned a bunch of broken wires a week ago. I never thought of repairing one, will give it a try, just for fun. Thanks for sharing.

[@eliseleonard7556]

I throw one away once a month myself! Good luck to us both! lol

[@Airconcleaner]

Yeah

[@eijonasson]

Great video. Best I have seen on KZbin. Conservationist would award you a significant amount of recognition for your splendid effort to save unnecessary amount of goods in the landfill/garbage dumps. Bravo !

[@theoriginalchefboyoboy6025]

remember to take a pix of the cable order before you unsolder so you can re-solder in the correct order...

[@munna4582]

This is main things….

[@wkn3445]

true

[@brendastuart194]

Great tip. Thx!

[@a1locc25]

Or go buy a 3$ cable. Or even Bigger brain moves, go buy a new phone

[@johngreen8693]

Yup, I capture anything befoe I dismantle it, from cars to coffee machines!

[@harpy1234]

soon as the soldering iron came out it was game over for me

[@MrDegsy69]

The soldering technique employed here leaves a lot to be desired? Dip the bare wire ends in some flux paste first and twist the loose strands together before tinning. This will make soldering them onto the pads on the USB plug so much neater and secure. Additionally use a better soldering iron with dedicated miniature PCB tips.

[@Seriouslydave]

Ooooooor instead of $30 in basic parts buy 30 cords? He got the job done its not like he works for spacex

[@MrDegsy69]

@@Seriouslydave i don't work for 'Spacex' myself David. The methods and techniques i have mentioned are just good, common workshop practice and nothing more. The solder pads on these USB plugs are so closely spaced that any stray braids of wiring will create bridges and shorts between the pads. You have to be more neater and fastidious working at this scale.

[@WhenYOUhearmyname]

kzbin.info/www/bejne/jJeZonqIrJiNm7M

[@mariogansbeke]

Soldered like a bricklayer!!! Replace your soldering tip, it's worn. And your solder isn't shining anymore so it means that it is burned.

[@andygilbert1877]

Agreed! Nothing wrong with repairing but a bit of care goes a long way. Top tip…have a look on KZbin for ‘How to solder’ videos. ;)

[@baduraldeenali2411]

تعلمت منك حل مشكلة كانت تواجهنى كثيرا.. جزاك الله خيرا و جعل عملك فى ميزان حسناتك و بارك فيك و فى ارحامك أجمعين.

[@ShishuTechno]

Good, reduce reuse recycle, refuse to buy unnecessary new items. Thanks 👍

[@amritabhattacharya3286]

His phone and its cable are indeed made for each other. Look at their conditions

[@Alex-t5f5n]

Провод явно уже раньше ремонтировали. В принципе , конечно, все верно сделано. Но качество пайки просто ужасное. Похоже человек не занимается этим постоянно. Но главное сделал. Работает. Молодец.

[@BlueWingedRino]

As someone who went to school for industrial electronics the tip of that soldering iron made my soul hurt.

[@brayden_schaan]

As someone who only solders occasionally as a hobby that tip also made my soul hurt😂

[@lukoskiabrahamovic4527]

@@JaEDLanc it is becoz the tip of the solder must be cleaned and kept shiny yet his tip is as black as charcoal 😂

[@UnknownIdentityDE]

The idea of repairing is great but your soldering technique leaves some room for improvement. First of all you should clean the tip of your soldering iron. Also don't overheat the solder. If it is not shining anymore then it is burned and will lead into dry soldered joints like in 4:40

[@Tux.Penguin]

यह मरम्मत प्रदर्शन बहुत मददगार था। शुक्रिया।

[@callmebrian1916]

This is a motivational video for 'Why we should throw away all bad cables'

[@callmebrian1916]

@Frank Lopez Well, yeah. Then now the problem is, the cable in this video is Samsung's.

[@CHUNKYCATSFISHING]

@@callmebrian1916 😂

[@eunzafri6793]

kzbin.info/www/bejne/a4W4eaqrga2Ko80 cycle ka invention please check

[@goldenoak8164]

Thank you for the sensibe and practical lesson. Also for the nice quiet background. Much appreciated!

[@cikumukunda]

right-ho! jus love videos that dive right in! self explanatory, one does not need to give long & winding stories.

[@Animepagecalynn]

I love how the cable gets fixed but yet the phone and the other cord looked mangled😂

[@shashank1780]

my man is a miser

[@Has7DCT]

Next video : How to fix your screen protector 💀

[@Frankie5Angels150]

Step 1- throw out cable. Step 2- go to any convenience store and by a new one Lather, rinse, repeat.

[@theguywithone]

I just wrap both ends of the brand new cord with electrical tape back about 2” and then put heat shrink tubing over that. Still have my original iPhone 7 charging cable and no issues. Another issue, take care of how you use and store your cords!. Great video, thank you for this!

[@robertthomas6127]

No tape and no shrink tubing and still using the original cords from my 6S and even my 4S. Of course there are exceptions but in general too many people treat their stuff like junk these days and then wonder when it is defect.

[@theguywithone]

@@robertthomas6127 it’s just an old habit of mine. I used to install alarm systems and everything was soldered and taped. You’re absolutely right though.

[@smurfiennes]

Well done 👍👍 I hope more people will repair theirs instead of throwing them away

[@andynew2219]

Judging by the soldering when he initially took the plugs apart, I would say these have been ‘repaired’ before!!. Would like to see him repair a Apple Lightning connector

[@jakexgold3879]

In my case I know the cable got broken inside and not the plugs, so tired bending it around and see which part is more likely has fault, I cutted the broken part off in the cable, I found a music cd disk, I reconnect the ends of the cutted four wires by twisting them into a string (about 1cm long pin after braiding the cutted wires., I insert the braided long “pin” into tiny plastic tube cutted (empties plastic tube of core of a pen), so the pin is insulated inside the pen-tube that’s about 3mm thick. So there are 4 pen-tubes insulating 4 pins, I taped the pen-tubes onto music Cd disk, and also taped the nearby length of the cable onto the cd disk, I need to cut a tiny plastic piece from a plastic bag to insulate the copper wired between the 2 out the 4 pen-tubes because they has to be taped all in one spot one on top the other. So the cable had been fixed albeit there is a music cd disk taped up in the middle the Lightning cable!

[@danc2014]

Apple plugs do not separate this easy. . The are injection molded and have a circuit board inside.

[@tede6784]

One alternative! Heat shrink to fit cable, sleeve, even the coupler. Takes about a minute, you don’t even need a heat shrink gun, use a Bic lighter - an inch or so above the flame and rotate 😎

[@tunkunrunk]

The tools required to make this repair will cost you more than buying new cables

[@100pancake6]

Facts, but at least you save same money in the long run. Also you get cool hot glue marks

[@sellosejake]

You won't be using those tools for only cable repairs

[@AboxofMonsters]

IF you dont have these things your not a do it your self R Likely gonna buy a cheap cable and toss the good that you could fix in 6 min The land fills are so filled with cables you trip over the tangled balls of frayed wires every step people have died they finding them in belly’s of sea turtles 😩👆

[@vijaykumarpandit2407]

क्या बात है भाई दिल खुश कर दिए। मैंने भी अपना केबल ठीक कर लिया

[@johnurban7333]

Did you notice at the end when he plugged it into the phone he turned the cable around and their was no damage on the end where he pried it open. The way it’s edited it could be a different cable. He needed to show the fixed cable being plugged into the phone without editing.

[@tand9854]

These days videos on KZbin just watch with a pinch of salt. Not saying this is fake but as you brought out it could be edited. Some viewers also commented if the colour of the wires mattered too. For me just buy another wire to save yourself the hassle of damaging your phone and blowing the warranty just because you wanted to save a few dollars on a cable. The time invested to strip the wires, solder back, cut yourself even is not worth it.

[@potato6216]

Not like anyone is gonna bother replicate this video. Just buy a new cable.

[@sevenn7pure]

I was wondering how he was going to get that 💩 solder job inside of that case without breaking at least 1 solder joint.

[@omokaroojiire]

I think I will leave the repair to you, because you do such a great job at it!!! Thanks for posting!

[@RealPlatoishere]

Yes after messing up 50 times getting numerous shocks.... buying a soldiering machine.....and reducing.the cable length to 1 inches cuz of the no of times to get a proper copper wire exposed...its totally worth it...

[@JACKSONYEOCK]

Thank you for the video😃Sadly I do not have a soldering equipment so I will have to buy one to start repairing but it is a good tutorial video. Thanks again👍

[@lindaj5492]

Look for generic cables first!

[@aryamansinghbais68]

"Do not throw away you old cable, instead, buy a bunch of badass tools for 100$ and fix your cable instead of buying a new cable".

[@wh3927]

Excellent video - I couldn't do that but it was a lovely meditative watch, you really have some skills!

[@rayysantuy8092]

Thank you for your information. After watch this video I will throw away all my broken original cable and buy new one.

[@jakexgold3879]

I thought I bought a new one too, but I had to fix it because it’s a third party product!

[@bruceglover7867]

Your hired. I need this servic about once a month.

[@timidater4803]

Thats one nasty looking soldering iron!!!

[@22jeepmojave75]

We have too many different types of cables, adaptors n chargers. They should minimize it and this will help reduce garbage and save consumers money

[@randyrodriguezsavina]

Scissor - check. Lighter - check. Soldering gun - ok i have to give the cable to my professional electrician neighbor. And just buy a new cable

[@ajcongdon1772]

And I have a soldering iron in my 👛, make up bag, oxygen supply equipment kit? It is the little micro USB that wears out in my phone. I keep extra cables in my bag, in the car and at home.

[@simzwilliams908]

As someone who has not invested in flux paste thanks for showing us what can be done with that solder that came with the iron. Great starter project to build up one's skills practicing some smaller solders.

[@WhenYOUhearmyname]

kzbin.info/www/bejne/jJeZonqIrJiNm7M

[@jakexgold3879]

I feel so sorry that he has a bad cat at home! Look at his cutted fingers!

[@AndrexT]

Yes, that soldering iron is a disgrace. He should also invest in a $6 wire stripper and some flux paste.

[@eunzafri6793]

kzbin.info/www/bejne/a4W4eaqrga2Ko80 cycle ka invention please check

[@CK-eo9uh]

This video was perfect for me, no rambling explanations by people just trying to insert their own 15seconds of fame by doing a KZbin video, just perfect up close demonstration. Thank you 👌

[@ravendark2422]

Think I'd just buy a new one in Poundland, not worth the bother.

[@justmeisthatok7990]

So cool to have the tools and steady hands.. ..sad they use such thin wire so it's a repeatable process. I used to be able to keep hands steady,even soldered a new harness onto an old pinball machine when i was 13.. Williams star pool , was so old score was kept by light bulbs behind numbers on back glass..that peeled..i did as much recovery as possible..hit the glass with clear coat and got about 10 years more . Then i got bored and stored it. House fire got it. Was from the original arcade at Revere beach..wonder what it would be worth at antique roadshow 😂.. take care! And thanks for posting what i used to be able to do..now i have to search through hundreds of other cables in stores looking for mini HDMI..✌️

[@znycelondon5313]

So simple. I will try this…..I have three chargers that need repair.🤗🤗🤗

[@J8_official]

Good video. No stupid pointless talking or an introduction telling us stuff we already know.

[@PastorIhaza]

Thanks. I always wanted to know about this... your technique can help with other repairs. I use scissors to cut plastic and strip the wires. Definitely need experience to use a razor... my finger would be like cheese. Glad to see the soldering, too for some computer work. Again, thanks and Be Careful🏆

[@ngoandrew8]

The glue thing is a great idea!

[@Pinkielover]

heated shrink wrap works best,, unless the inside wires are damaged..Most the time it's not

[@shawnpepin7890]

How can you get the heat shrink on the cable without cutting it.. the wide ends of the cables are in the way

[@vanfly6731]

Thank you for the video So that's how you strip wires Specially the smalls one's that always snaps

[@tookitogo]

Nope, this is the first time I’ve ever seen that loony method used. They make wire strippers for thin wires, too.

[@gopi6003]

I did fix one, thanks 👍 for sharing.

[@Deadpool313-x6j]

People who saying this is useless and instead repairing we should buy i want to say that it doesn’t take that much time however this is for fun also if u want😂

[@c.nicholson3536]

Aside from he “critics” complaining it’s a pain in the a_ _, I think the video can at the minimum depict that it CAN be done, and it’s relatively easy with basic skills. I personally enjoy the idea of being able to fix things myself rather than constantly overpay for cables, electronics and accessories.

[@brendaprice665]

I, too, am fed up buying stuff that can be fixed - if we just knew how. Now I do, I won't be going into town or ordering off Amazon (who send the wrong stuff). It leads to other things being fixed once you've got the bug.

[@ivanteo1973]

yes, but first you need to invest in a pair of scissors, soldering iron, solder, glue gun, glue stick just for a dollar micro usb cable. In most cases they comes free with any peripherals.

[@user_1abc]

You missed the point. He just wanted to save 10 bucks on the cable and make 599 bucks with the views so that he can get a new cable that would come along with the new phone.

[@ivanteo1973]

@@user_1abc You are sadly mistaken. I was replying to C. Nicholson's comment. Not the video owner. BTW micro USB is free, not 10 bucks. I have thrown away several cables because I have too many.

[@user_1abc]

@@ivanteo1973 Two things. First - you are the one mistaken because I never replied to you. Do you see yourself tagged in my earlier comment? NOPE. I was replying to Nicholson as well. Second, micro USB is not free. If you lose one, you have to pay 10 bucks to get a new (original/ GQ) one. That's called the price of the spare. I have half a dozen lightening and type-C cables but that doesn't mean they come free.

[@fongvlog3076]

Kudos digital sat another awesome tips I would try this out kudos once again!

[@rachitbishnoi8657]

The title : Do not throw the original cable of the phone , but repair it "EASILY" The Repair : Me : Yes yes it is very easy we all have soldering equipment and all those things at home , it is very easy 🤣🤣😂😂

[@karst41]

I would add shrink wrap prior to soldering and reassemble. this will make a great strain relief and the repair will last a real long time, and or outlast the device..

[@borninacave]

You can fix these without soldering as well. You can take apart the usb ports, pull the wires out and reattach to the cable. I've done this to a few of mine.

[@Kal-el1285]

But that doesn’t makes it look neat and kind of unsafe. This looks neat and professional

[@borninacave]

@@Kal-el1285 that's right. If you don't know what your doing. Guess it's a good thing I did this for a company before. Otherwise I wouldnt know how to do it. As for safety - the cord is absolutely safe. Safe as the way the soldering method is ( soldering is overkill for this repair)

[@Kal-el1285]

@@borninacave u can make a video about it and put it out

[@borninacave]

@@Kal-el1285 I don't make KZbin videos buddy. I made 1 in my life 12 yrs ago. Not about to start making them now.

[@Smzxe]

😂😂😂😂 you're gonna die soon You just cut the cable and directly connect the wire into 220 volt plug See ya next time son

[@leohmunera4589]

Nice thank you. Hopefully next time you upload the video is about to how cellphone lcd repair

[@jeromewysocki8809]

The problem is with the crappy insulation outer sleeves on these iPhone cables. I have not seen it on other brands. The repair works, but the sleeve will soon beak up again in another spot, necessitating the same repair over again. Otherwise, this would work well. With iPhone cables, it is best to replace with a generic cable. It will certainly last longer.

[@reubenj.cogburn8546]

This is correct. Sometimes, because you can does not mean it's a great idea.

[@DKArmstrong]

I agree, they also tangle easier than other brands because there kinda rubbery.

[@David-hm9ic]

It’s a user problem caused by pulling on the cord instead of the plug. This is not an iPhone cable. Apple doesn’t want the unwashed fixing anything.

[@jeromewysocki8809]

David , I had three iPad (or iPhone) cables fail in just the manner I described. I have an electronics background and I know not to pull a cable out of its socket by yanking on it. These three cables failed just as I have described. The outer plastic covering (sleeve) did disintegrate after several years. It was not yanked out of its socket, ever. You are correct, however, in that pulling on the cable will indeed destroy it in short order. It may not necessarily fail on the first such pull, but pulling on it will very significantly reduce its life, causing it to fail much sooner. As I said, I have not seen this disintegration problem on the generic cables I have been using for several years now.

[@MS-Patriot2]

Gotta love post apocalyptic maintenance skills.

[@rfresa]

Thanks so much! I have twisted up so many old charging cables and couldn't bring myself to throw them away. Now I know how to fix them!

[@jakexgold3879]

I don’t need a soldering tool, I just use used up pens, their emptied tubes of the pen, cd disks that’s out of date, i just tape them up onto the cd disc after cutting and throw away the wasted part of the cable, reconnect the 4 wires with about 1cm long braided reconnected “pin”, I insert the “pin” into cutted into length pen-tube that’s 3mm thick, I taped the pen-tubes onto the cd disk, and taped more length of the cable nearest to the pen-tube onto the cd disk, now it’s fixed and working!

[@gordonnewton4832]

In England you can buy a new cable for a £1

[@JinCola1001]

is too risky...while soldering put wrong colour of cable...and our expensive smartphone will get damaged

[@David-hm9ic]

Zero risk if you simply pay attention. Best reserved for people with a little common sense and basic skills, though.

[@montysingh2520]

Soldering those wires again is a skillful task!

[@a1locc25]

It's basic soldering and the least. Soldering is alot easier than this guy makes it look.

[@RD-wo2mf]

THE POOR QUALITY OF HIS SOLDERING JOB EXPLAINED WHY THE SOLDERING IRON WAS IN SUCH BAD SHAPE!

[@dlx92]

When you're so broke you can't get a $9 charger

[@BlueWingedRino]

Or fix your broken screen 🙄

[@imran05233]

Don't try this at home. That guy has professional stuff with him. He is pro in this work.

[@mosesalberts9758]

QUIET BACKGROUND IS CLASS....perfect

[@vittoriobacchiega9118]

Good idea to save the earth from waste. I thought the half shell connectors was joined with ultrasonic welded. I'll try it

[@johntiggleman4686]

Just buy a new one. Turn in the old one to an electronics recycle business.

[@MrDegsy69]

Vittorio they nearly always are to force you to buy a new one. This surprised me as well!

[@vittoriobacchiega9118]

I disassembled the Samsung original cable and the wires are not welded but vampired (like LAN cable) by connector. The plastic collar around cable is welded with external cable insulator this require a drill to remove the damaged insulator cable. I'm electronic engineer and hate to throw away without afford a challenge to repair where the time cost is on my charge for passion.

[@vittoriobacchiega9118]

@@MrDegsy69 It's a consumism law. I thought the type of sheath rubber is weak/poor and after time (O2 oxidation) this cracks happened near the hard/soft joint (near connectors).

[@Simplyluvly]

I'm sure my husband doesn't want to repair it though I ask him to watch this video.

[@sharadpanwar7]

Very informative video, however I will buy new cable. 😂🤣😜😜

[@elizabeth3280]

this reminds me on what it was like to take a course as a teenager except we used newer stuffso my concerns on the corrosion did not come into play. I think people would find it satisfying to be able to fix simple stuff though as the principles are very similar with most components.

[@johnwang9914]

It is so frustrating that something as simple as cables is so much easier and less expensive in both time and money to just replace over so simple a failure.

[@rebelbegaming4622]

Thought I would’ve been able to do this until he pulled out that fire machine lol

[@nitayg1326]

Loved this. Never knew these cables can be fixed.

[@stinkee2]

Everything can be fixed

[@rafab2774]

No, they are not. Most of them are glued together. And if you swap the wires or make short circuit you gonna destroy your phone.

[@stinkee2]

@@rafab2774 That doesn't mean they can't be fixed. It just means they are harder to fix.

[@rafab2774]

@@stinkee2 You could glue a broken glass together if you want. Yeah. Only forget about Coffee after.

[@stinkee2]

@@rafab2774 I've repaired a shattered mug before AND drank coffee out of it the next day.

[@WillNewcomb]

Thank you! The hardest part is opening up the existing plugs. I've never seen ones that simple split open. Mine are all fused. Do you have any tips for opening/cutting them so that you can get at the connections inside?

[@lady_peace_rose]

Finally! A solution! Thank you.

[@rafab2774]

No. It is not. Try it without cutting or burning yourself nor cutting or burning a plug dead. I assure you will quit after about 50th try.

[@bradellison1345]

you make soldering look so easy, not sure I could do the same

[@fmtien]

To give the new life, you would have to buy a flux, soldering iron and a hot glue gun if you don’t already have it. Those combined cost much more than the cost of bunch of replacement cables.

[@lonster3000]

And the time you spent trying to do the repair.

[@lavidaesbella361]

Eso es lo que he pensado,hay que tener los utinsilios, sino.....

[@Jah_Rastafari_ORIG]

You forgot to twist the wire before tinning...

[@wilmersilva4338]

😆 🤣 never knew how easy it was to repair.

[@razagame2448]

Not available tool required at home

[@nathan2964]

Its too easy yah? T.T

[@WhenYOUhearmyname]

kzbin.info/www/bejne/jJeZonqIrJiNm7M

[@tothemoon1406]

@@nathan2964 it is his sarcasm

[@rafab2774]

Not easy at all.

[@williamlim5234]

I'll only do this to my older phone cables with the proper tools as a mini project other wise just no. I could have bought a new cable less than 5 dollars in my country and it works

[@benrichards399]

If you tie 3 old ones together, you've got yourself a skipping rope. Extra tip, you can do the very same with new ones too.

[@martinmwangi4095]

Only came here on recommendation but it was worth the watch. Great insight

[@Thomass7586]

Your asking alot from most who cannot even program there tv,s or know to change the batteries in the remotes.

[@mahoneytechnologies657]

No Prize for Workmanship or Technique

[@docglock3300]

Maybe I’m missing something, but shouldn’t the colored wires be replaced in the same position all the plugs?

[@dipankarmookerjee2282]

Exactly the same question from me.

[@icaigoaqui79]

If you turn the USB micro to the other side the connections are ok. Black ground, Green USB Data +, White USB Data -, Red USB vcc + 5v

[@joshicune]

Actually not :-) but if you change order, you need to make same change on both sides :-)

[@a1locc25]

Lol wow!! Ok let say pin 1 on USB is your power but pin 3 on micro is power. If you put the wire on micro pin 1 the plug wouldn't work.

[@kaisercc]

Buy some colored electrical tape. Use it to wrap around the wire and the connector. It takes one minute to do, it is stronger than the original and it is colorful.

[@goblack2africa54]

I’d rather but another cord than haste with repair. Not easy as it may seem

[@rafab2774]

Soldering an USB is a damned High Risk Operation.

[@RoRke21]

It could be useful for a not so rich person though.

[@knowledgeseeker5247]

Soldering kit needed ....which one?

[@knowledgeseeker5247]

Hot glue gun? Wish the equipment used was listed. Would be very helpful

[@rafab2774]

@@knowledgeseeker5247 Yeah. Equipment with prices. What I can say forget about soldering micro contacts with < 50$ solder station.

[@zard1231]

Now it's time to make 'fix your screen easily' video.

[@johndublyoo2553]

Your soldering skills are shocking!!!!

[@ledioshqiopa2401]

Bro, your phone does not deserve all that effort 😅

[@j.m.74]

Sure, the repair may not be super difficult, but at the end of the day you still have a poorly designed cable with well known, failure prone outer insulation

[@lunchie80]

Good thing they know how to fix things, mangled cable and smashed phone.... They should look at that awful mains cable next, looks like the insulation is pulling away at the plug too. ⚡

[@downloadhelper5110]

This is not a original usb cable 😂😂 Becouse Original is very hard to open it The second layer in it is of metal 😂😂😂😂😂😂😂😂😂😂😂

[@rockstare8507]

🤣🤣 correct my experience

[@bachasahib9516]

Really it’s amazing 👍💫💫💫 Cheers of good work 🙏

[@dpbossnews]

Beautiful, because soundless..👌

[@AnchansFunWorld]

I dont have the engineer brain to recycle my old cables.

[@alanrkanter]

There are so many things wrong with this video. Doing all of this for a person with limited skills may ruin the devices connected, a replacement cable just does not cost enough to warrant this. Not all connectors will come apart as nicely or easily as shown. OMG get a new tip for your soldering iron, yours was shot. Many times, with the number of times this plug has been "man-handled" the connector itself may be tired with the thin plating scraped off of the substrate, yielding a likely intermittent connection. Lastly, if handled properly, no cable should end up like this, ever.

[@leftysr.stupid1144]

I wouldn't call yourself a pro but you got it done