DINKY TOY RESTORATION FORD ZEPHYR 162

[@steppoify]

A wonderful outcome! The paint quality and careful application is a joy to behold! Well done.

[@MHFyffe]

Excellent attention to detail. Superb finish. Congratulations.

[@davidhyde4329]

Thank you very much! Sorry for the delay.

[@michaelaldredge-greenwell1692]

What a cool restoration

[@thedieiscast9729]

Very nice restoration of the Zephyr. I like the treatment of the Base plate. Thanks for sharing with us

[@davidhyde4329]

Many thanks I appreciate your comment ... David

[@malcolmmacmillanmacmillan2050]

Beautiful. Perfect true restoration

[@notdonaldst]

Beautiful restoration David. It was a pleasure to watch. Thank you for sharing.

[@davidhyde4329]

Glad you enjoyed it

[@nickymoran654]

Such memories for me.I was the company nurse at Meccano when the factory closed.

[@davidhyde4329]

Hi Nicky. How very nice of you to comment. The company nurse at Meccano - I feel honoured. These were literally my favourite toys as a small boy. I am pleased that they have returned to my life and I am enjoying owning them all over again. Thanks again Nicky, stay safe ... David

[@alansaxton86]

That was quite informative I liked the new paint removal technic - it's better than caustic soda and paint striper simply because it's better for the environment. Paint striper and caustic soda end's up down the sink and the sea. I also like your method of the plate removal well done. The car turned out great thanks for the Vlog 👍

[@davidhyde4329]

Thanks again Alan. I try to be eco-friendly with my restorations - we all have to do our bit. Really appreciate your comments once again ... David

[@brianartillery]

Looks superb. I love that you have simply brought the toy back to how it would have looked when it left the Binns Road factory, all that time ago. As you say, quite rightly, they look very good, but they aren't perfect. Of course not. They were made as TOYS, really great toys, to be played with. I had one of these, and it got played with a lot. Inside in the winter, and in the garden in the summer, with my lead farm animals and figures. Thanks for sharing! Nice one.

[@davidhyde4329]

Many thanks for the comment. 'how it would have looked when it left the Binns Road factory' is exactly the look I am aiming for - I couldn't have put it better myself. I like to keep some of the 'play' or 'toy box' story too. Hence my 'under-restored' base-plates. So glad you 'get it'. Regards ... David

[@skodakatie7341]

The finished product looks amazing, very talented restoration of this model car!.

[@RestorationAustralia]

Great looking model, well done.

[@davidhyde4329]

Many thanks! - much appreciated ... David

[@Knasterman]

nice job... love the rivets to unite base and chassis again ...

[@davidhyde4329]

Many thank much appreciated ... David

[@jakespicer5696]

Marvellous job David I loved it is think the smooth Wells mach it better then the old ones well done

[@davidhyde4329]

Thanks again Jake, appreciate the comment. Me too, they were smooth on the originals ... David

[@kittonsmitton]

Fantastic, looks better than new.

[@davidhyde4329]

Thanks Alistair, appreciate the comment ... David

[@haydenlogston2164]

wonderful work

[@greggoodwin2183]

Beautiful car. I really like the color combination, it stands out well. This, to me, is great therapy and a wonderful way to relax. Hoping you enjoy doing this for many many many years ahead.

[@davidhyde4329]

Thanks Greg, I hope I do too. New Video on the way, perhaps next week ... David

[@jimmyduncan7650]

Hi David., Nice finish job indeed. Thanks for paint source info.

[@nightster6378]

A really nice little model and result, I have restored maybe about 20 or so of these Dinkies a few years back, a couple of things I do, I make my own rivets and superglue them in, another is I don't use a primer as on some castings detail can be lost and if a little chip happens it's easier to touch up. But hey everybody has their own way of doing things and if you get a result its all that's needed.

[@davidhyde4329]

Thanks for the info! Like the idea of making my own rivets (is a brief description possible -I would be interested). Take your point over the primer. I don think the originals were primed anyway. I will try this out as well. Appreciate the comment.

[@nightster6378]

@@davidhyde4329 Hi David regarding the rivets I used either 4, 5, or 6mm alloy bar depending on the rivet head diameter. I got from eBay in 1M lengths. Fix preferably old or cheap drill m/c lightly horizontally in a vice, I used an old orange B&D if you remember them (they were junk) and run on the slow speed, effectively you are using it as a crude lathe. Cut in short enough pieces to fix I a chuck of a drill protruding the length you want the rivet, I do mine 6-7 mm. Using files round the tip of the bar the profile of the original rivet head with a fine file. Centre punch the centre of the bar and use a 5mm drill in another drill m/c, of course, to get the dimple in or around the centre, it doesn't have to be perfectly centre as the originals weren't always the centre. Use a 1/4 inch flat or square double-cut secondary or fine file. Put a washer (a mudguard washer is good for this) on the bar against the jaws of the chuck to protect the file (the jaws are hard) and use as a guide, the thickness of the file should fit between the washer and the edge of the profile you made at the end of the bar, file while the drill is running until a diameter of 3mm, cut off and dip in acid to tarnish and you have a rivet. I dipped mine in I think old battery acid I had to tarnish. It is a bit of a faff but I think worth it considering you only need about 2 or 3 per car, oh and superglue into the hole in the post. It took me longer to write this than it takes to make 2 rivets lol. I tried a few methods like 3mm pop rivets with the centre filled and painted silver, it was ok but I think making my own was best. I still have about 20 odd restorations to do. When??? I have a set of the racing cars in poor unrestored condition with a few tyres missing here and there bent wheel axles etc, mounted in a deep frame behind glass on a matt black background in staggard grid positions hanging on the wall and you look down on the top of them. I considered mounting them over a print out of this picture instead of the matt black. upload.wikimedia.org/wikipedia/commons/8/8c/Fangio.png Many comment on how good they look. I also have a couple of spare AA and RAC outfits I will do the same with. I went on ebay and notice all the £2 and £3 restorations have pretty much dried up, I was buying mine 15 years ago at £5 max inc postage, I stopped going to the local toy fairs as a few traders who found out what I was doing with them and had an hour or so before the public were allowed in were buying them up, painting them, I will say crudely and selling them for £15 to £20 or so at the next fair. Sorry for the long comment if any part is not clear let me know but hope this helps.

[@nightster6378]

David I should add the last few Dinky's I did I didn't take them apart, I have a small sandblaster that shoots aluminium oxide I use for carburettors as I restore motorcycles, I used this to strip the paint and base and it leaves a beautiful finish ready for paint in 5 mins and mask the base and rivets. I don't generally do cars with glass though have done a Spot-on BMW Isetta and Corgi Heinkel and a Ford Thames Camper. These, as you know, need to be taken apart. www.ebay.co.uk/itm/Blast-Cabinet-With-Aluminum-Oxide-Grit-And-Dust-Extraction-Sandblaster/193705785411?hash=item2d19c3b843:g:vgIAAOSwfN1fgzuy www.ebay.co.uk/itm/SANDBLASTER-GRIT-BLASTING-SAND-SANDBLASTING-CABINET-90L-LITRE/353142600232?hash=item5238f07228:g:HGwAAOSwtjdfEaXs

[@EricRaduazzo]

I’m only in a couple minutes and love it, especially the narrative

[@davehamlyn3097]

Such memories. My older brother and myself each had one.

[@eduardtiana7212]

Great Job!

[@davidhyde4329]

Many thanks Eduard 👍

[@b.2221]

What a beautiful restoration, and such a gift you have Sir. This was a pleasure to watch, and thank you for sharing your video Sir 👍 Tam.

[@davidhyde4329]

Many thanks Tam. So glad you liked the video ... David

[@lifeorliberty3086]

I like the sanding sticks. Great idea my friend. Car looks great.

[@davidhyde4329]

Thanks Mark, comment very much appreciated ... David

[@grahamparr4710]

Fine job, you are right about the debate on the amount of restoration, my own view is that just because the factory finish was poor does not mean we have to follow their example, any model deserves the best finish we can give it.

[@davidhyde4329]

Thanks for the comment Graham. Much appreciated ... David

[@rum1pole]

Fantastic restoration, excellent video from start to finish.

[@davidhyde4329]

Many thanks. Very much appreciated ... David

[@johnblackburn7673]

Very nice restoration keeping a bit of originality, excellent and I enjoyed watching

[@davidhyde4329]

Thanks John, very pleased you liked it ... David

[@leedsguyuk69]

Excellent, very entertaining, I enjoyed watching it

[@simonschuh5283]

Great job David as a Dinky lover I like to see them restored to original and not have the faults corrected, great work.

[@davidhyde4329]

Thanks Simon, appreciate the comment ... David

[@spence812]

Excellent informative video David. Lovely job with the restoration and paintwork

[@davidhyde4329]

Thanks Spence, much appreciated ... David

[@a.garland5003]

Nice one David , you are right none of them came out of the factory perfect

[@davidhyde4329]

Thanks Tony 👍👍 ... David

[@patrickstarnes2355]

Fantastic lets see some more videos like this, thanks David.

[@davidhyde4329]

Thanks Patrick, I will do my best, glad you liked this one ... David

[@Steven_Rowe]

Lovely, brings back loads of memories

[@davidhyde4329]

Thanks again Steven - glad you liked it ... David

[@timcruse9054]

Thanks David a brilliant video.

[@davidhyde4329]

Thanks Tim, much appreciated ... David

[@timcruse9054]

Keep up the great work and videos a source of inspiration.

[@lrg3834]

Love the ultrasonic/enviro stripper innovation. Seems to work really well. On another note, nice restoration.

[@davidhyde4329]

Yes it does, better than I expected too. Appreciate the comment - thanks ... David

[@alanwann9318]

Yes, I had this one

[@patrickjforde2660]

That's amazing...

[@birdie399]

Really enjoyed this restoration. The result is excellent.

[@expatmartin]

Really enjoy your videos David, I loved my Corgi and Dinky cars as a kid in the late 50s thru into the 60s.

[@davidhyde4329]

Thanks for the comment. Me too - and the same period. Loved my Dinky toys - now regret letting them go ... David

[@tknrgnome]

Hello David just wanted to say it's really cool to watch someone bring life back to a classic toy! 👍 I really enjoyed watching and I hope to watch more of your videos in the future. Thanks again and take care!

[@davidhyde4329]

Very kind of you to say. Many thanks 👍👍👍

[@sctransit]

Beautiful job! Great finish on the paint!

[@davidhyde4329]

Thanks for the comment, much appreciated ... David

[@timking4175]

I enjoyed your restoration of 162 Zephyr. I have one too which until now hadn't considered restoring. Can you suggest where I might buy some new tyres and a new display box/ carton?

[@davidhyde4329]

Sorry for the delay Tim - many thanks for your kind comment. ebay is the easiest for spares and boxes. The boxes I prefer are I prefer are by DRRB - here is a link : dinkyboxes.com/collections/dinky

[@revzillo]

Beautiful restoration David . That Zephyr looks great in that two tone green and cream , perfect 👍

[@davidhyde4329]

Thanks Jerry, appreciate the comment ... David

[@sarcastic7007]

Amazing, nice restoration Love from India💐

[@davidhyde4329]

Very kind of you to say. Many thanks 👍👍👍

[@schuey089]

Fab restoration! Great to watch, keep them coming!

[@PhilPage227]

Superb job David, very inspirational.

[@davidhyde4329]

Thanks for the comment Philip, much appreciated ... David

[@pauljohansson7697]

Nice job.

[@valborchardt3596]

Thanks David, gosh that really looks lovely. First class. Take care as always from South Africa

[@davidhyde4329]

Thanks Val, much appreciated ... David

[@JohnSmith-xi3sq]

As a kid in Rhodesia this was eagerly awaited, because it looked like real cars we saw on the road.it appeared in the Meccano Magazine about 3 months before it was on the shelves.

[@MrPabernard]

Bravo joli travail

[@davidhyde4329]

Merci beaucoup, appréciez votre commentaire ... David

[@georgewyatt6712]

Hi David. Just caught your restoration of the Ford Zephyr. What an amazing job you have done. Well done David I look forward to more of these excellent restoration video's, I also love watching you 00-gauge layout video's. so regards for now. George.......

[@davidhyde4329]

Many thanks for your kind comments George - so glad you like my videos ... David

[@Colin399]

Great job

[@davidhyde4329]

Many thanks, much appreciated ... David

[@BillMrWild]

Nice video David,. my friend had one of these cars a 1953 model Zephyr six i think the green colour was darker also the bonnet emblem was chromed as well...thanks for sharing.

[@davidhyde4329]

Hi Bill, many thanks, they do bring back memories. I had a Mk.1 Consul (similar) with bench seats, column gears and plenty of chrome - great cars ... david

[@GuzziIan]

Great job David, it looks terrific.

[@davidhyde4329]

Many thanks, much appreciated ... David

[@garytru563]

A job well done! A very interesting vid, Thank you!

[@davidhyde4329]

Thanks Gary, much appreciated

[@cideinzunza]

I recommend you use caustic soda to remove the paint, because it's removed easier and faster. Use it with hot water, but remember to use it with rubber gloves in your hands as a precautionary measure.

[@davidhyde4329]

Hi Carlos, I have thought about it, thanks. I might well give it a try. I will see how long the Chemclean lasts !! Thanks for the tip ... David

[@cideinzunza]

You’re welcome!

[@keithfoster6000]

caustic soda is very poor paint stripper on these older models the paint is sometimes lead based so very toxic

[@TONYNORTHEASTERN]

Lovely job. David. I think I have been inspired...….cheer's Tony

[@davidhyde4329]

Hi Tony, many thanks for the comment, much appreciated ... David

[@daviemaclean61]

Another nice sympathetic restoration job David

[@2H80vids]

What a tidy job David, Well Done. That masking tape was very effective, the join-line looks excellent - very accurate indeed. I'm looking forward to more of these in the future. All the Best from Plockton, Dougie.

[@davidhyde4329]

Thanks for the comments. More will be along, although I need to produce a railway video soon - things get busy, but I will do my very best ... David

[@stevena9384]

I guess I'm weird like that but I get really excited when I see you post a restoration.

[@davidhyde4329]

Many thanks Steven, I would never call it weird, but whatever it is, I appreciate the comment 😁😁😁 ... David

[@stevena9384]

@@davidhyde4329 Hi David! It's been 3 months and I need my fix - any car restorations in the works?

[@luisdardis5223]

superb yes!

[@PaulLowmanNZ]

David, may I ask where you sourced the replacement rivets?

[@davidhyde4329]

Sorry for the delay Paul - ebay is the easiest source for these.

[@keithhawtin571]

Nice work sir.

[@davidhyde4329]

Many thanks Keith ... David

[@martinpattison5110]

Very nice restoration David. We had MK1 Zephyr Zodiac in Bristol Fawn and Dorchester Grey I believe it was a 1955 model. The straight 6 cylinder engine had no problem taking us to Devon with our Sprite Musketeer Caravan with had very similar colours to the Zephyr, but the opposite way around. The motif on the bonnet was chrome. (We called it the Flying Bomb) Martin (Thailand)

[@davidhyde4329]

Hi Martin, sounds wonderful. Great colour scheme must have looked amazing with the caravan. Thanks for sharing and thanks for your kind comments. Glad you liked the restoration ... David

[@panicon2]

Thank YOU!

[@DiecastShowCustoms]

Nice

[@markoconnor1186]

Hello what drill did you use please,and excellent again

[@davidhyde4329]

Hi Mark - not had a lot of luck with my early drills the ones I use now are a 2.5mm drill for drilling out the 'rivet' and a 4.5mm drill for removing the head of the 'rivet' - hope this helps ... David

[@steven2212]

Great vid. A battery powered tooth brush works wonders with paint removal.

[@davidhyde4329]

Thanks Steven, for the comment and the tip. Regards ... David

[@colinp2238]

Do you know if originally the models were spray painted or dipped?

[@davidhyde4329]

Hi Colin. Good point, I must admit I don't really know. Sprayed I would guess, but it really is only a guess ... David

[@dhcraft9472]

excellent restoration, the only thing I would suggest is to paint match after the sonic cleaning. looking forward to the next one.

[@davidhyde4329]

Thanks - good point - sorry for the delay ... David

[@travelersdiecastcustoms1511]

Nice work👍👍👍

[@davidhyde4329]

Many thanks ... David

[@khossossykhossossy7955]

Impressive!

[@michaelrzeszuto777]

Nice work ,and hi from Albany NY US

[@davidhyde4329]

Hi Michael, many thanks ... David

[@martinpattison4018]

I know there is not enough room on the base of this model, but it is a Zephyr Zodiac that would have had the straight-six 2500cc engine with a three-speed column change gearbox. They were all two-tone paint finished. There was the Zephyr 6, but that was in a single colour. My Dad's 1955 version was painted in Bristol Fuan and Dorchester Grey. YPD 981. The flying bomb on the bonnet is another give away to the real thing and the Over-riders were fitted as standard,, but an option on other models including the 4 cylinder Consul. a nice restoration and as it should have been done in its original colours. Unlike a certain Locomotive, I could mention. Martin. (Thailand)

[@davidhyde4329]

Thanks Martin for the background information on the Zephyr Zodiac. I remember them too although I was only a child back then. Lovely styling though. I do remember the 3 speed column gear change - I did eventually own an old Consul in mid blue - bench seats and column gears - very American. Your Dad's two-tone sounds great. I think I can guess the loco you mean - thanks again ... David👍👍👍👍

[@barrybakewell9616]

really nice job david well done

[@bronzesnake7004]

You do excellent work David! I was surprised that water soluble stripper worked as good as it did! Jack - Canada

[@davidhyde4329]

Many thanks Jack, very kind of you to say. I was surprised too. I did say to subscribers who were not keen on my old stripper that I would try and find a more environmentally friendly product - this could be it (hopefully) ... David

[@bronzesnake7004]

@@davidhyde4329 Ya, I'll gladly switch from the chemically noxious gel stripper I've used for twenty five plus years! Nine times of ten a subscriber comes up with "solutions" which work poorly (very generous of me to understate) lol! I've just started to brows your channel and I see you're an incredibly talented artists as well! I love the birds!! I've been painting mostly landscapes, with a couple of exceptions where I painted an African scene with an elephant, and one had a birch canoe beside a river with a deer or three! I've been seriously considering replacing all my old oil paint with water soluble oils! I tried them many years ago when they first came on the market and I found them to be too thin which impeded my wet on wet method. There's been a LOAD of new painting related products becoming more and more easily acquired such as "Liquin" (yes, I most likely butchered that name! ;) There's all kinds of products for speeding up drying, or slowing dry time down depending on the subject matter and how to best attack various elements within the painting. So, take care David!! Jack - Canada

[@martinpattison1567]

I know Dinky did not have the room on the base plate to fit the full name, but it is a Zephyr Zodiac. It was our favourite family car and it used to tow our caravan without any problems. YPD 981 was painted in Dorchester Grey and Bristol Fawn. The number plate was a stick on one on the front of the bonnet split into two halves. David, the Flying Bomb on the bonnet was Chrome Plated and I think the strip behind was also Chromed. They had a straight 6 2.5 litre engine. Martin. (Thailand)

[@davethaw4279]

Hi David, Can you suggest where I might be able to obtain the ECO 100 paint stripper? I can't find it anywhere online. I have a very troublesome Victor estate that I cannot get the paint off. I've watched a few of your videos, you're doing great work, I think you've sold me on the idea of an ultrasonic cleaner.

[@davidhyde4329]

Sorry Dave - I can't. Found this product on e-bay and bought a couple of bottles. When I came to re-order I could find no trace of the company or the product !! I have used up my supply so now I am going to use caustic soda. The US cleaner can be useful as it is a good way of cleaning up an old model for your collection if you are not going to restore it, or perhaps re-touch it. I don't use it for full restorations since a subscriber pointed out there is no need to clean if you are going to strip the paint.

[@davethaw4279]

@@davidhyde4329 Thanks David, I watched some more of your later restorations and saw that you can't get it any more, shame, it looked to work well. I got the outside of the Victor stripped, I laid it in a container of acetone which loosened the paint, it didn't shrivel up but it came off with a bit of scraping brushing and steel wooling. Here's the H&S bit: You definitely need some good ventilation for using that much acetone it's very volatile and could make you dizzy and nauseous, even leading to unconsciousness.

[@davethaw4279]

FYI: www.ebay.co.uk/itm/Johnson-Pledge-Beautify-It-Surface-Polish-750ml-Formerly-known-as-Johnsons-KLEAR-/361619671188 I haven't tried it yet but it looks as though it's the new version of stuff you used to use.

[@TimeRider]

As always, nice restoration David!

[@davidhyde4329]

Many thanks, much appreciated 👍👍 ... David

[@dannybracken6982]

I'm new to your channel. Nice work beautiful car

[@davidhyde4329]

Thanks Danny - welcome to my channel and thanks for the comment ... David

[@trainmanbob]

So easy to watch and understand David. Superb piece of work. Can I ask what pressure you are spraying at please? Cheers, Bob

[@davidhyde4329]

Hi Bob,many thanks for your kind comments. I set my pressure at 20 psi - this seems to work fine with this paint and my airbrush - Regards ... David

[@justathought958]

I have a question being an amateur. I noted you first used a 2mm bit to get the rivet started then you switched to a 4.5 mm drill to fully drill out the hole. May I presume the new rivets you used to replace the old ones also 4.5 mm?

[@davidhyde4329]

Hi, thanks for your question, and apologies if I did not make it clear how to drill out the rivets. The fact is that they are NOT real rivets, they are posts moulded into the body casting. They pass through holes in the baseplate then the top of the post is hammered over in the factory to secure the baseplate - giving them the look of a real rivet. So to remove the baseplate you need to start with a small drill (say 2mm - the diameter of of the new 'rivet') and drill down into the post to the length of your new 'rivet'. Then use a large drill (4.5mm) just to drill off the head of the old post. The baseplate can then be removed. The 'rivet's sold for Dinky and Corgi Toys restorations are not real rivets - google them, or check them on e-bay - it will help make this clear. Hope this has helped👍👍

[@justathought958]

@@davidhyde4329 Thank you so very much, David! Your help clears this up and I am off to the hardware store as I've discovered my drill bits are a bit...........old. Again, this has helped "reassuringly" so! Dan

[@TheSteamLocomotive]

Great job on the restoration!

[@invisiblepatriot]

Very impressive restoration, David! Definitely one of the best I have ever seen. Always thumbs up for you! I strongly recommend you to wear gloves while doing some of the work, for example, getting rid of the paint. The paint remover was eco-friendly, but to a chemistry guy like me that is still quite harmful to the skin. Anyway it is always pleasant to watch your videos.

[@davidhyde4329]

Hi Jack, point taken - I should be setting an example. Glad you enjoy my videos and thanks for the super comments - always welcome 👍👍 ... David

[@grahamfoster9404]

Somtimes you cant do f++k all right. Its not as though your stripping a london bus , any way it took three times longer in the tank. Good for you on the wheel stripping. F+++ing eco warriers

[@invisiblepatriot]

@@grahamfoster9404 Don’t get me wrong man, I am not a eco warrior

[@strange-universe]

I was sure this was going to be the next installment for watercolor. But no, it's a great old toy. There is a lot of Matchbox and Hot Wheels repairs going on these days. The Dinky toys and Auburn rubber vehicles were among the more prominent toys in my childhood. Nice variety of topics on your channel!

[@davidhyde4329]

Thanks for that. Painting and model making has been my life's interest, I was hoping that a 'mix' would be appreciated. Really appreciate your comment ... David

[@BadChizzle]

Cool!

[@ミニカーマニオ]

Good‼️😄

[@davidhyde4329]

Many thanks 👍👍

[@derrickroe9791]

Welcome back David..I've been looking forward to seeing another of your Dinky restorations. Can't wait for the Lagonda! I've been using caustic soda for stripping paint because it is quick and very effective but I really like the idea of a greener method. Please let us know in your next video if it is reusable...it looks very good from what I've seen in this restoration. Love how this came out....up to your usual high standards. 👍

[@davidhyde4329]

Hi Derrick - thanks for your comments. I will reuse the stripper for the Lagonda - this will be in the next Dinky video, I am hoping I can use it a few times, but we shall see ... David

[@davidyeates526]

Can you reuse the ECO-100 paint stripper more than once

[@davidhyde4329]

Yes David, definitely - I have already used it twice (watch my next restoration video) I plan to use it again - to see how long it lasts - regards ... David

[@davidyeates526]

Thank you David i will give it ago. Brilliant videos 👍👍👍

[@ronaldlapointe1219]

Well Done 👍!

[@EddieMillerStudios]

Looks like the British equivalent of the 1949-1951 shoe-box Ford.

[@davidhyde4329]

Hi Eddie, never heard of the 'shoe-box' Ford so I have just Googled it. You are correct, it does look very, very similar. With Ford and Vauxhall being popular here in the 1950s (still are today) but in the 50s you could easily see the American influence in our car designs - I loved it !! Thanks for the comment ... David

[@s.sestric9929]

@@davidhyde4329 The "shoe box" American Ford was one of the first envelope or "ponton" bodied cars produced in the US, and took it's styling cues from European cars, notably the pioneering 1947 Cisitalia 202. Other cars still had separate fenders (wings) and hoods (bonnets) that rose high above the fender line. The English and American Fords were true postwar designs.

[@stewartgoodchild2930]

Hi, just found Your channel, subscribed, I've only just started collecting, could You advise Me please?, the two tone MK1, did it come without windows when made?, and secondly, where do You get replacement tyres?, any help appreciated, take care, regards Stewart.

[@davidhyde4329]

Hi Stewart - apologise for the lateness of my reply. Have not been able to make videos for many months, so I expect you have found your answers by now. The Mk.1 Zephyr certainly came without windows in it's early issues. As far as I know it was only available in a two-tone scheme. As for the tyres - many traders sell on ebay - I buy mine through ebay. Apologies again 👍👍👍

[@squallywally]

Hi David! I have been patiently waiting for another Dinky Restoration! Do you have one in the works?

[@davidhyde4329]

Hi, my apologies, my model room has been chaotic but now its cleared and I have built a larger workbench. Yes, I am pleased to say there is a new restoration on the way - The Lagonda open top tourer. Finished a new Railway video, so this will be next (before Christmas) ... David

[@TrojanBad]

when you clean in the machine can you put jewelry cleaner in to wash it, or is it abrasive

[@davidhyde4329]

Sorry Sarah. I have not been able to make videos for many months. However, I can't be of much help because I do not know much about jewellery cleaner. Not much help I know - I hope you have found the answer elsewhere 👍👍

[@chrisabraham8793]

Dinky toy original paint is quite a strong paint. I tried acetone but that had no effect, so i tried a modellers solution of Detol which works a treat. As for a metal primer i use a colourless Tamyia metal primer which you can colour a small bit, so if you scratch the paint work the primer colour doesn't show through it matches top coat.

[@pauljohansson7697]

I just subscribed to your channel and hello from New Hampshire usa.

[@davidhyde4329]

Hi Paul, many thanks for subscribing. There will be more dinky restorations shortly. Great to have subscribers from the US ... David

[@paddycoleman1472]

Hi David, where did you get your cleaning machine from?

[@davidhyde4329]

Hi Paddy - I think I bought mine off ebay for about £18 (including shipping). Here is a link to a selection on Amazon :- www.amazon.co.uk/s?k=ultrasonic+cleaner&crid=13YPPSILIQO8H&sprefix=ultrasonic%2Caps%2C158&ref=nb_sb_ss_i_1_10 and here is another Amazon link to the item I use in the video :- www.amazon.co.uk/FLOUREON-Ultrasonic-Stainless-Professional-Eyeglasses/dp/B0744GDJ3C/ref=sr_1_52?crid=13YPPSILIQO8H&keywords=ultrasonic+cleaner&qid=1559361150&s=gateway&sprefix=ultrasonic%2Caps%2C158&sr=8-52 Hope this helps. Check out 'Ulrasonic cleaners' on ebay for, perhaps, a better deal. Hope this helps ... David

[@NomadMakes]

Wow! New vid! Great to see that you are uploading. Pre-liked and all. Now I will see the video. Cheers. ;-)

[@davidaebooth]

Hello, I found your video very interesting, I am about to try and restore a Minor 1000 split screen corgi car, but I must advise you to ware thin rubber gloves when stripping and painting. Regards David.

[@davidhyde4329]

Thanks David, appreciate your comment - point taken about the gloves ... David

[@martincodiglia]

👏👏👏👏👏

[@archeryman62]

Where do you get your Rivets from?

[@davidhyde4329]

You have probably found them by now 😊 - I get mine from ebay.

[@МихаилКатегов]

Isn't that car was in clip of Pet Shop Boys' song "You are always on my mind" (1988)?