Tail as Turn® + Backup LED Module for Hyundai Genesis Coupe

[@nathan23ftw]

Just received my package and installed it. Took 2 mins and looks fucking awesome. Keep making genesis products!!

[@diodedynamics]

Nathaniel Goclan, thanks for your support! Glad to hear you like them!

[@SalFitnessTV]

if i purchuse from amazon do i need to get 2 sets? or order of 1 for 40.00 will come for both tail lights?

[@andreww1212]

Got my kit for the BK2. So awesome. Easy install and high quality components. I also added LED front turn signals as well as fog lamps. Looks very premium. The components have also held up very well in the New York winter and summer.

[@diodedynamics]

Thank you for your support! We're glad you're enjoying it!

[@ShortyMonky67]

I just ordered these from amazon it looks amazing easy install.

[@lovemee8975]

Would this be good still if you run the audi tail light mod? idk if it would mess with the other part of the tail light being constantly on

[@diodedynamics]

Hmmm- we're not sure about that one. Please go ahead and give us a call at 314-205-3033 Monday-Friday 10 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and we can help you look into this!

[@nate_bk1210]

Mine are Audi modded they work fine the wire cut on them has nothing to do with this kit

[@VeryTense]

@@nate_bk1210 did you do the dual reverse light here too? You just followed the same directions?

[@ShinobiYourHomie]

Should I worry about the hot resistors melting my cover piece that you take out and put back for install? I put my resistors on the metal because I didn't want to melt my tail light housing and it's in close proximity with that cover piece. I just don't want to have a fire in my trunk while I'm driving haha!

[@diodedynamics]

+Jarell We would recommend taking care to keep it away from any soft surfaces. If you have any further questions, feel free to contact us!

[@josepadiia]

wonder if it works on a '10 genesis coupe?

[@diodedynamics]

Jose P, this will also work with 2010-2012 models for those with the upgraded LED tail lights!

[@DanStrong]

Purchased these today. Diode Dynamics are there any more products coming out for the gen coupe? Something like DRLs on always would be awesome.

[@diodedynamics]

Dan Strong, thanks for the continued support! We are constantly testing our Always-On™ technology in new makes and models. Stay tuned!

[@ogwarsaw1]

when unlocking the door with your key does the tail lights light up like they do with the factory turn signals?

[@diodedynamics]

msjconnolly, after installing this module, your tail lights will be activated by anything that previously used the factory turn signal location. Thanks!

[@Jecsennnahhh]

Diode Dynamics , I don't think so. I could be misinterpreting your message, but when I locked my door prior to installing these modules, the turn signals used to activate and flash two times. Now, after installing these modules, the brake lights activates and flashes two times. If that's what you meant in your message, you may disregard this message.

[@andrewmceachern4705]

Purchased these the other day, realized I didn't order the leds and splicer for old signal spot - can't find the signal replacement on website. Can I order just that ?

[@diodedynamics]

Andrew Mceachern, if you could shoot us an email at [e-mail] or give us a call at the office at [phone], we would be happy to get you taken care of. Thanks!

[@brayan_m]

Question, do I need to buy one or two for both sides?

[@diodedynamics]

The come in pairs. A quantity of 1 will give you everything you need to do both sides!

[@akuma4u]

One of my modules died within a year after installing. Just received a warranty replacement but im afraid of same thing happening within a year or so.. are these prone to malfunction or break?

[@diodedynamics]

Hey there! These are not prone to failure at all, as these are actually some of the lowest warrantied out items we offer in our entire lineup. I wouldn't worry about installing these again, you won't have any further issues!

[@thomasnguyen5627]

Do you have to remove the housing to install the LED bulbs?

[@diodedynamics]

You can access the bulbs by removing the same panel shown in the video above!

[@ltc01300]

One of my running lights are out. So wanna of this can fix it or will I have to buy a new tail light. Will it fix my running light ?

[@diodedynamics]

By running lights, are you referring to the factory LED portion within the housing itself? If it is a factory LED portion, you may need a new tail light assembly unfortunately.

[@CashMulah]

i bought the bundle today but it didnt come with the t tap connectors. i was wondering what guage they are. thanks!

[@diodedynamics]

ChiangMoney, if you could shoot us an email at [e-mail] or give us a call at [phone], we would be happy to get you some t-tap connectors for your kit. Thanks!

[@eduardoig17]

Idk whether to do this or get the LED turn signal

[@diodedynamics]

+eduardoig17, you could do both! This module allows for various configurations. Shoot us an email at [e-mail] and we would be happy to help you out!

[@kflowMerk]

In order to install the t-taps onto the yellow cable, do I have to peel the yellow cable?

[@diodedynamics]

+Fern Fritos, nope, you don't need to peel the yellow cable. Just place the t-tap over the yellow cable and use a pair of pliers to clamp it down. If you have any other questions, don't hesitate to contact us at 314-205-3033, Monday-Friday 9am-5pm CST!

[@garrettthomas9289]

I went to install it on my gen and realized that the resistors had no adhesive tape on the back but instead 2 holes, 1 on each side. Will I have to run and get 3M tape to install it?

[@diodedynamics]

The resistors will get pretty hot. We recommend securing them to a metal surface using screws.

[@stoyansavov7060]

@@diodedynamics are the resistors get hot if I don't replace the bulbs?

[@diodedynamics]

@@stoyansavov7060 Yes, they will still get hot.

[@cashlessracing]

So you can just cut the wire on your harness for the Audi mod correct? Or would you still have to open the taillights on 13+ genesis and cut each wire for the Audi mod?

[@diodedynamics]

Hi there! Please go ahead and give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail], and our service team will be happy to look into that!

[@abrahamhaniff6848]

Could this be done for a 2010 Genesis coup? Or can you guys make a module that would allow the same for a 2010?

[@diodedynamics]

+Abraham Haniff Unfortunately, this module is only compatible with the 2013-2016 Genesis Coupe. Sorry about that! However, our DIY Tail as Turn Module is compatible with vehicles with LED tail lights and incandescent turn signals. Check it out at the link below! www.diodedynamics.com/tail-as-turntm-module-diy.html

[@Tvsland]

where do i get the modules ?

[@diodedynamics]

Hi there! You can check out our Tail as Turn Module here: www.diodedynamics.com/2013-2016-hyundai-genesis-coupe-tail-as-turntm-backup-module.html

[@Mina-db9tq]

I have a hyundai elantra 2013 do you have the the same for my car. Thanks in advance.

[@diodedynamics]

Sebastian Hunt, thanks for your interest in Diode Dynamics! Our DIY version of the Tail as Turn™ is perfect for any vehicle that has LED tail lights! Attached below we have a link to that product on our website. If you have any other questions please shoot us an email at [e-mail]. Thanks! www.diodedynamics.com/store/catalog/product/view/id/21872/s/tail-as-turn-module-diy/category/1441/

[@MrSamuyop]

How can i make them sequential after that?

[@Mike-lq3kg]

How would I do that on a 2017 Chevrolet Impala and what do I need.

[@diodedynamics]

+Mike Check out our DIY Tail as Turn Module, which is compatible with vehicles with LED tail lights and incandescent turn signals! www.diodedynamics.com/store/catalog/product/view/id/21872/s/tail-as-turn-module-diy/category/1441/

[@rubymalia9345]

why would you do that?

[@diodedynamics]

A more modern look!

[@3AProductions]

Anything like these for the rav4 2019?

[@diodedynamics]

Hey there! Unfortunately, we do not have a plug and play option for the RAV4. You could use our DIY Modules, from the link below, if you don't mind cutting factory wires. www.diodedynamics.com/tail-as-turn-module-diy.html If you have any other questions, just give us a call at 314-205-3033, Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at [e-mail]!

[@davidscott2882]

Can u give me the part numbers off your site

[@diodedynamics]

+David Scott, attached below we have a link to the product. Thanks! www.diodedynamics.com/store/catalog/product/view/id/22461/s/2013-2015-hyundai-genesis-coupe-tail-as-turntm-backup-module/category/1441/?

[@jeffholbrook7411]

does this still work with the audi mod?

[@diodedynamics]

+Jeff Holbrook Our DIY Tail as Turn™ Module is compatible on any vehicle with LED tail lights! Check out the link below for more information. If you have any further questions, just let us know! www.diodedynamics.com/store/catalog/product/view/id/21872/s/tail-as-turn-module-diy/category/1441/

[@davidscott2882]

Will this work on a 2011 coupe ????

[@diodedynamics]

+David Scott, this will only be compatible with the models that have LED tail lights (2013+), however if you swap over to newer style housings, everything works great!

[@itzjuex1015]

300$ I’m broke ain’t no way 😂

[@diodedynamics]

Hey there! The module itself is $80. If you would like to add the optional backup LEDs, it adds to the cost.

[@itzjuex1015]

@@diodedynamics yes Ik I want to do the led as well 😭

[@El_Jefe_Barracuda]

Tom Brady?