Must-Have Moto Tools for your Shop

We share with you 30 key moto tools that you should get to take your shop to the next level. If you shop online at Rocky Mountain ATV/MC please click this affiliate link to shop in the future. There is no extra cost & it helps support our channel. Remember to click this link RM ATV/MC -DBTV Shopping each time you need to go there to shop. www.rockymount...
Jay Clark/Dirt Bike TV has been around the Dirt Bike industry for thirty years and is always looking to learn and help others do so as well. Give a follow or drop an email if you have any questions or comments. Thanks for watching!
Instagram: @dirtbiketv1
Facebook: / dirt.bike.tv
KZbin: / dirtbiketv
Website: jayclarkent.com
Email: [e-mail]
Thanks for watching, don’t forget to share and subscribe.
#dirtbike #shop tools #motocross

[@Drain09]

All tools I’ve acquired over a decade. Harbor freight brake bleeder is a nice one, parts washer, utility sink, good vise setup, and headlamp.

[@Chillsarahh]

Thank you I’m gonna go try that brake bleeder

[@andrewbecker3700]

Low pressure tire gauge and valve stem remover tool. Not to mention a good quality air chuck. Spoons and rim savers for changing tires.

[@jowens4160]

Awesome stuff, a couple things I have slightly different, instead of having a full set of nut drivers, I just bought a couple of 1/4 and 3/8 drive drivers that I can pop on whatever socket I need, I also bought a set of t handle drivers and a set of toed and Allen bits, and welded them to the drivers, so I have a full set of torx and Allen T Handles, handy since I work on KTMs and Harley Davidsons.

[@barkeep25]

Another great video Jay!!. You got one for what items you bring on a trip or a day ride etc..

[@timsilva1944]

Some vernier calipers are very handy. Also feeler guages. You can get by without some of these items, but if you can't accurately measure things you're stuck wondering if things are in spec.

[@BraapBoyz]

Awesome video as usual!🤙🏻 only thing I feel like was left out was feeler gauge. I always refer to you guys to figure out what kinds of things my shop needs🤘🏻

[@leadhead7338]

Team Green...Always!....Thanks for the Video you do a great job on them and they always help more than you know. AMERICA STRONG STAY FREE LONG LIVE THE REPUBLIC

[@toddhickox4757]

Excellent info ! Thank you !!!

[@marcosmachado5989]

awesome stuff Jay 👏 special snap on & motion pro 👌

[@Reck_614]

Heck yea! This is the video I’ve been waiting for xD

[@spencerclark2269]

Awesome stuff. Great suggestions. Thanks

[@robh3267]

Those first wrenches you showed are called Line Wrenches as in brake line, trans line etc.

[@SSRacing66]

Jay, thanks for sharing. I have nearly all those tools as well. I've been looking for one of those "flying part finders" Got a line on one of those ? 😂

[@daveharding6696]

A brass hammer is a must ( buy 1 striking tool instead of many tools that get struck )

[@onthethrottle7104]

Thanks for showing Snap On tools, most guys say they are way too expensive but they work perfectly and don't break down like other tools. Also, the Snap On tools that I purchased even 30 years ago are worth the same amount of money as new ones now. They never decline in value and they work perfectly - I can always count on my Snap On tools, can't say that for the other tool manufacturers. Great show, Jay.

[@JH-zy1dj]

I feel the same way. When you have 2000$ in nuts and bolts on a bike. I'm not going to put a harbor freight socket on it, I'm sorry. You get what you pay for.

[@travisvanalst4698]

Can never count on Snap On power tools. Absolute garbage.

[@agonz.11]

I just stripped my front axle nut. I don’t think I need anymore tools. At least I took my wheels off to have them rebuild by faster USA.

[@jeremyfernandez7237]

Thanks Jay 🤙

[@3dwezzy740]

all that but i deffly keep my bead buddy and my torque wrench impact valve steem puller all lat

[@hall_moto]

Spinal Tap joke was nice

[@RC.56]

Can’t seem to find big Y little Y wrenches anywhere with what looks like 3/8 driver ends?

[@zrkn1]

Must have been tuff keeping track of all those tools over the years.

[@nastysoda9212]

Thank you!

[@dirtbikesicehockey4788]

T handle wrenches get the most workout in my garage

[@gmarsh7873]

Heat gun is a good 1 also

[@mschumaker1]

great video but i got a big blast of anxiety/OCD when you opened those drawers.... yikes. Too many tools.

[@mixonmachines]

I’ll take em lol

[@numbzinger350]

I'm impressed. Most people don't know about flush-cut cutters and why they are so important. While working on the V-Rod line at H-D a co-worker was severely cut by a sloppily cut wire tie. After that I begged the engineers on the line to supply us with the proper cutters but my wants fell on deaf ears. Morons.

[@julianarodriguez3635]

How about for scooter

[@thanedavis1273]

Where were you 10 years ago?

[@humpday2267]

Doing the same stuff just not putting it online like he is today. Jay has been in the industry for a long time!

[@dylanb586]

Graduated cylinder*

[@diegolainfiesta]

The problem with these type of videos is they are made with the assumption you'll get into maintaining your bike as a professional shop would, instead of which type of tools you need at a minimum to do the same job even if you take a little bit longer. He showed many speciality tools that only save time and are expensive. You are not billing your services, therefore such levels of productivity are not required.

[@StreetbeatDesigns67]

There are plenty of people who like to maintain their own stuff for the sake of convenience (not cost) who have plenty of money to throw around for tools like these

[@sampson7941]

Smh

[@jboner11]

Palm ratchet ftw