Case IH 2388 Will Not Start And Here Is Why! This May Help You To!!

[@garymessina1609]

That pig tail will out live the switch great video thanks Brandon

[@brittblanton8342]

Great information Brandon 👍

[@johnhyde111]

The joys of buying used equipment sometimes its unbelievable what you find after you own it for a year

[@jonathancrissinger2301]

That's an interesting kit. I may have to check it out for future problems.

[@artillerest43rdva7]

if you know the wiring patterns for the combine and the safety interlocks etc. you can troubleshoot all of the issues that come up. then isolate the issue. and methodically remove the variables. great job finding the problem and determining a safe bypass for temporary to be able to harvest.

[@Bman2020]

Way to keep going 👍👋🇨🇦

[@garymurt9112]

I had a similar issue with a tractor. The tractor had a spring steel that tge clutch peddle pushed on that in turn pushed a button allowing the tractor to start. One day tractor wouldn't start, took an hour to figure it out. For a while I just reached up and under the cover and pushed the button to start it, then I did the wire loop bypass, now it has the plug cut off and a wire nut.

[@AndrewHCann]

Excellent video Brandon :) yes those new Case International combine be interesting to fix my one neighborhood neighbors farmer have them and one problem with quit working plus before happening all acting up also teletales going crazy and plus lose power had Case International Dealership mechanics out try fix up didn't last! What happened think weird battery cables were shot and ground cable Pigtail had burn off body bolt plus connector also washer and soon got fix that up fire up all back normal after full right ! Plus had sandpaper all up plus bolt also hardware to plus wire ground with connector to stairs bolt to switch you have get fix too Lol ! But I was one found issue for them and the neighborhood neighbor farmers got Case International combine said check those ground did for them and told my one cousin Ray about to check Case International and his old New Holland combines ! But let know that to Brandon before you have Electrical problems too and solve it fast!

[@markcornell986]

Keep a eye on the big power cable going through cab wall ,it can corrode and the connector,kills stop the combine. 😡

[@Tx06xrc]

When you get the switch in and are done with your jumper I would ziptie it to the harness so if the switch fails again you have the jumper plug where you need it

[@peteschiavoni]

That was a nice easy get ya going fix

[@glenschumannGlensWorkshop]

Good job!

[@MrMagnum7220]

I gotta move the hydro lever back and forth to get the switch to close.

[@CaryGuyer]

Nice find Brandon. That looks like our old combine, can you tell me where and when you purchased it?

[@dirtgrainsteel]

Last summer and it came out of the Remington area

[@NorthEastOhio]

Our 2388 is a 1999, and I'm not sure if it has that switch. No need to push the clutch in. Yours must b newer?

[@dirtgrainsteel]

I think I just push the clutch out of habit it's just a safety thing I've always done

[@MarkCooper-q4h]

4840 john deere has switch under the cab that will get pull out and not crank

[@dirtgrainsteel]

My 4640 has that same switch I was in some dead giant rag weed stems one time and it got knocked off

[@br927]

I know how to "Hot wire"!

[@hvy1ton]

That ain't factory.