Dirty Diesel Knockers | Spun Bearing?

Me and the Dewclaw pull the Mitsubishi engine out of a big generator to see what's broken.
The gag they'll never see coming! www.etsy.com/c...

[@captiveimage]

Can't wait to see this mean machine rebuilt and throbing again

[@arduinoversusevil2025]

That sinking feeling when you realize the text to your wife went to the wrong spot.

[@imagineaworld]

@@arduinoversusevil2025 it cleanses the soul, new beginnings and so forth

[@interstellarsurfer]

Hehe, throbbing. 😅

[@robinturner2300]

Interstellarsurfer I don’t want to see any throbbing in an an AVE vijeo

[@xxxxxxxxxxx82]

@@AndrewSteffenHB patron, geeeeze still people asking this??????

[@BravoCharleses]

A wise man once told me there ain't no prom queens goin' out with a guy named stubby.

[@h0lx]

Lawnmower episode?

[@redlock4004]

Unless Stubby's Dad is a millionaire. Then as long as he can pass certification as human...

[@5roundsrapid263]

Some women prefer the Ron Jeremy type, some prefer the Gene Simmons type. My wife is definitely the latter.

[@ronkennedy213]

Depends which part is a stubby.

[@jasonji1900]

5Rounds Rapid I never heard that Ron Jeremy had to worry about a callback. He always got the job done first time.

[@alexmaclean1]

I'ma tell ya one thing, the computer generated caption algorithm has not figured out AvE speak yet.

[@corwinweber693]

Neither have most humans. That's why we watch. :)

[@theprogrammer32]

I barely done myself

[@noelhenderson700]

It's British Columbianeze. We all of us talk like that.

[@FroggyMosh]

@@corwinweber693 Wait, We haven't? Are we not in on the goddamn Kaboutertjes'? Wait..... Maybe zijn we dat ook niet. Je kon weleens gelijk hebben. Hah. I found his secret. Halfway down your sentence you just dip into your native tongue for a bit (and only for a bit mind you). If your native is not European just throw in the word Stroopwafel every third sentence, till you pick up more words, and it'll come right back to ya just like riding the village bike. *Ugh... I blacked out for a second..... What happened?

[@corwinweber693]

@@FroggyMosh But English IS my native language.... I mean I could lapse into poorly remembered Spanish briefly, but..... I don't remember all THAT much of what I studied...

[@mathewboyer5141]

Spun bearing and fram oil filters go together like chicken nuggets and bbq sauce.

[@ratman5727]

Man, -no shit about that.....

[@denisrhodes54]

go back and watch part 1. unit was purchased DRY

[@MitzvosGolem1]

45 years used them never had a issue in marina or trucks?

[@disturbedrocks1996]

@@MitzvosGolem1 fucking internet comment scientists, amirite?

[@vctrsone]

I worked in car parts for a long time, every year we split oil filter brands apart to compare them, Ryco and wix are the best quality. Fram doesnt even use a coil spring in them like everyone else..its a small piece of pressed bent metal and the filter paper looks like toilet tissue. DONT USE FRAM. (as you seem to know!)

[@thomas316]

Stabbing has been a time honoured traditional Glasgow greeting since time immemorial. Yet suddenly the kids are doing it in suburban London and everyone pretends to be shocked.

[@kwakamonkey]

A chibbing

[@WS-ij1fu]

Thomas English bumboy

[@nexviper]

The anti-gang/knife crime stuff being implemented in Glasgow is really impressive. Who'd have thunk that actually talking to the (often) young guys and trying to solve the root issues of why they are carrying chibs does more good than trying to ban everything up to an including having hands.

[@deadprivacy]

the londonnistanners stab to kill, in glasgow they would just stab you in the arse.

[@DudeInOhio85]

That's not all they're doing these days. The UK is a world leader in acid attacks too. Cultural enrichment

[@JGHDVCFGT]

Knock knock. Who’s there? Cylinder 3

[@chrisfreemesser5707]

That's a Generac, not a Caterpillar. You can shake hands with danger all you want.

[@rustyshackleford531]

You can shake hands with anybody...except that guy that was changing the pin on the lift arm

[@bigb7157]

Love the old safety videos. Wish they still made them like that.

[@brycedavis907]

@@rustyshackleford531 you can, but it's frowned upon!

[@carbonharmonics]

@@bigb7157 pretty sure the guys on the scrapers rattled their brains clean out

[@JMKady76]

@@rustyshackleford531 You can still shake hands with that fella, even from across the room! Just don't 'spect him to shake back.

[@cbrftwo]

Everyone tells me the glitter oil I run looks expensive. Truth is its actually very reasonable. 😂

[@jasonriddell]

I am not to sure main bearings are "CHEAP" so I would say your GLITTER OIL IS expensive (-:

[@jeremymorra323]

$50 for some glitter oil? Cheaper than getting regular oil from the dealershit

[@AdamNDJ]

I know full well why this was a voice over episode... I can just imagine all the sudden onset tourettes going on in there, and the newly minted cuss words.

[@carlhannusch3929]

I minted a few myself and engaged safety squints when he lifted the engine with that sketchy come-along.

[@500dollarjapanesetoaster8]

It's like listening to two brain surgeons at work. You can recognize some of the words, but the rest is techno-jargon of the highest quality.

[@jeremyt7722]

"Fuuuuuck...youuuuu" .... " Yeah I missed a bolt" seems like every project at work

[@drewsharpe7484]

Holy shit,I just found somthing AvE didn’t know about! The fan guards are to keep animals from getting in. I’ve cleaned more pieces of dead cat out of grocery store Generac generators than any one Man ever should have too....

[@matthewellisor5835]

At least ole "Three-Finger" can still count to safety-third.

[@samb3706]

Merry Christmas to you and your family. Please keep the scientifically correct and politically incorrect videos coming at a rapid pace! Merry Christmas to Dewclaw and his family too!

[@jonarbuckle1560]

12:40 I'm telling you guys: This is a POETRY channel. AvE perhaps missed the boat on being the world's best freestyle rapper.

[@mrolsen6987]

This is like watching a mechanic dokumetary a reality show and listen to a stand up comedy at once! Hahaha 😂 I Love it! 👍👍

[@JD-hy6yc]

Mr Olsen seriously, I usually don’t understand what he’s saying but I love the jokes. Reminds me of holding the flashlight and getting cussed at while my dad beats the Chevy

[@Oscarphone]

A real time saver!

[@mrolsen6987]

@Brian Hopper Hahaha 😂😂👍 You just light My bad day up! Hahaha 😂

[@brianfriedl7464]

AvE is always a good time. The phrases he comes up with...

[@a.gunguy1054]

My ribs are literally sore from laughing. This guy is truly funny.... and whip smart.

[@willb5272]

The old Cat training video, lol. "Shake hands with danger." Well done, sir.

[@jamesisenbart6523]

Everything about this engine removal looked safe

[@oleghh]

With safety third you better believe it!

[@asdasd-ni8eg]

Ah the magic of editing

[@markfergerson2145]

I felt no danger whatsoever watching from my rocking chair...

[@markfisher7962]

Especially around 12:00 or so...

[@deathcogunit106]

unironically seems fine to me, compared to my work. t. boat builder

[@GrandHunterMan]

I feel you on those exhaut bolts. I pulled the manifolds off an '84 international and the fucker before me put antisneeze on em. God bless em

[@otm646]

You best pull the whole crank out. There's going to be other issues, it's not just a single bearing.

[@johnlemmey7698]

Nar. Some emery tape, another shell from the usual scum bags. jam her back together and flog it off in an auction. Job done. Then off to the pub.

[@myteepatriot4643]

What's the Fun in that?

[@asdasd-ni8eg]

@@johnlemmey7698 That's the previous owners wasn't it?

[@Sai.Hottari]

The discolouring on the crank shaft joints says "All bearings are fucked". The one AvE showed was just the first to spontaneously disassemble.

[@rayg9069]

@@Sai.Hottari Nope, induction hardened bearing surfaces, a hot spun bearing should have had similar colour on the rod end cap. Notice the next journal alongside has the same colour spread, but no damage. Dang clever these Japanese.

[@sski]

Lovin' this channel. Just subbed today. Love the knowledge and humor. This generator action reminds me of when I found a Generac generator at a yard sale a couple years ago. A simple 6.5 horse gas powered 2000 watt jobby that the guy had up for $100. Said he hadn't run it in a couple years. I gave it a pull on site and it wanted to go but the guy told me that as he was getting it out for the sale he tried to run it and it wouldn't fire up more than a chug or so. I bought it knowing that all I had to do was clean the carb and fuel system as it was most definitely gummed up by old fuel. And damn straight, that's all it was. Cleaned everything up, fresh gas, and fresh oil and now I have a nice little electric power source for home or my truck when I need it. Cheers!

[@AndrewBrowner]

i wonder why those fire fighters used them expensive weight saving bearings on a stationary generator? those are usually only good for 6 figure trophy trucks

[@zerg9523]

Thats a mighty generator you got there... she’ll knock the pancakes right off your griddle i’ll tell you what. Hope she chooches strong and long.

[@zombieresponder]

It's a generac, so that's unlikely.

[@-Jo]

“As long as you portray the proper false bravado, everything is going to work out just fine.” -AvE 2019

[@Rapidpanda1st]

"Coveted like the last chicken tendy at Comic-Con" -Bumblefuck 2019

[@chaddentandt9868]

"Shake hands with Danger". Now I'm hooked on 1980s safety videos! 👍👍😎

[@Stoney3K]

"Ever wondered where your ten-mil goes? God darmn kaboutertjes?" Secretly having some Dutch ancestry there I hear.

[@TheREALHelly]

Weird timing... Just this morning, I was just watching that 80's CAT safety video 'shake hands with danger'...loved the production quality, found it comical and informative. it's shocking to see how many people don't take the time to be situationally aware and nothing has changed in 40 years. Like you say in your videos, you always gotta be thinking about what could kill you next.

[@jason-ge5nr]

That wasnt a reasonable job for a good forklift, let alone your clap trap approximation.

[@MrSplic3r]

Definitely could've done with an overhead crane on that one, hah

[@SquillyMon]

I must say... as a mechanic... This is a really nice piece of equipment even with a spun bearing.

[@mdftrasher]

Ah, de kabouterjes have my 10mm ;-)

[@DC_DC_DC_DC]

GODDAMN KABOUTERTJES!!!

[@mdftrasher]

@@DC_DC_DC_DC poemoekel ;-)

[@willemdegroot6959]

Leve de Kaboutertjes!

[@sonixthatsme]

Kut kabouters! Waardeloos.

[@hansjacobs9734]

Fucking kaboutertjes 😂😂😂 Zijn nederlandse hints zijn geniaal 😂😂😂

[@WhosAGoodDogue]

HEY! - I thought you were making all them words n stuff up. But, I read me the service sheets on how to do this, and wouldn't you know it, it's word for word what you said.

[@djambrosia]

DVD directors commentary at it's finest.

[@Nickgowans]

As an apprentice I used to bolt dirty marine diesel generators together. Many many specifically torqued bolts. I remember having 30 machines lined up in a shop waiting for me to torque the genny onto the engine. Many hours of melancholy

[@sleeptyper]

Secretly you enjoyed it. The only thing your boss thought you were good at.

[@middleroad00]

You got tagged for that duty cause your Boss knew that you'd do it correctly and not mess it up.

[@codygooch510]

What a waste. Grab an Impact and uggadugga them bitches right into their home.

[@sapeandersson1607]

It aint CAT, but sure sounds one. Keep that metal flake oil, its expensive stuff they say.

[@Onewheelordeal]

@@sonacphotos A 55gal drum of synthetic blend 10w-30 costs me like $220

[@RedesCat]

doctor: Sir youve been in a coma for a year! me: Aw man i cant wait to see how my favourite bar tending robot is coming along!

[@bruceminnier2936]

There are only 5000 10mm sockets and wrenches in the whole world. They keep selling you the ones that find their way back to their birthplace. It's a never ending cycle. The buggers are alive and they dont like being away from mom for too long.

[@aceof8S]

That's why the ones you make don't leave, just break!

[@leapyear9460]

Your diction reminds a wee bit how jack Kerouac wrote, minus the complete drunkenness. This is a compliment of the highest regard. Its most entertaining and enlightening to listen, observe, laugh, and commiserate. I just dig it man. Many many thanks.

[@EiEioGuy]

Ave thanks for the year again of great knowledge and great laughs.... it's always fun to watch a fellow 200 lb gorilla beating on the knuckle buster.... Merry Christmas to you und you Familia.... and to all who watch this great man beat farstners into place....

[@Battosai87]

I am suprised about your comment that these engines don't get repaired but just replaced. Used to work in a company which build generators in Germany. We were happy about every engine comming in for a repair. Spare parts for industrial engines are dirt cheap. A piston for a 12 cylinder 24 liter industrial engine is a lot cheaper than a piston for 4 cylinder 1,8 liter car engine. Such a huge piston costs as little as 80 Euro a piece. I am talking the whole piston, including the connecting rod and piston rings. Our costs for a general overhaul of a 430 kW engine were 3000 Euro spare parts, 1000 Euro for the regrinding of the crank shaft and the cylinder heads and 80 hours of work. Afterwards the engine was like new and ready to operate for another 60,000 hours (if the maintanance was right). In comparision, a new engine of the same type would cost us around 35,000 Euro.

[@gaveintothedarkness]

4:43 such an obscure reference. Good on you. Made me laff my arse off.

[@kelly00000111111]

4:47 found yer problem, it ain’t an American made soot thrower!

[@mwce2]

Gotta love those equipment safety videos from the late 70's

[@rayceeya8659]

You know what? I think someone about a half a decade ago took a shortcut. Just because it's that particular bearing. I think someone skipped a maintenance period and thought he could get away with it. It's the one bearing that lines up with the oil sump and would be a pain to replace. I'll bet he skipped it, and found another job the next week.

[@ShawnDickens]

I snorted when you said, I have it on good authority he performs intercourse the same way.

[@konamanstudio2447]

Yes I'm one of the guys who described to your Channel I enjoy song somewhat really doesn't do anything for me but I'm still happy to have your channel I'm wishing you and your family a very merry Christmas and the cheers with a beer I should say freaking beer

[@AmateurRedneckWorkshop]

Their is never a good reason to carry a fist is next when the no knife thing does nothing to stop violence. Evil is always with us and looking to consume the weak.

[@5roundsrapid263]

“If you have no sword, sell your cloak and buy one.” Luke 22:36

[@bdivin8298]

“Your arm holding it down ain’t doing F all” had me dying

[@jmurphy1973]

Shake Hands With Danger appeared in my suggestions nary a week ago so i watched it. Suuuper cheezy but a must-watch

[@d3faulted2]

I rebuilt an engine from a Takeuchi TL10. Don't know what 11 herbs and spices the Japanese put in their fasteners but was amazed at how rusty they were and how I only managed to snap 1 off.

[@MattLitkeRacing]

Top Fuel style is sand the crank in the block, brake clean it, put a new bearing in and send it

[@dutchgray86]

Generator engines need to last more than a dozen seconds between rebuids though unlike top fuel engines.

[@jdrok5026]

@@dutchgray86 a genset needs to do more than a max of like 900 revolutions.

[@godfreypoon5148]

@@jdrok5026 I'd expect any of mine to do at least 500,000,000 revolutions before overhaul.

[@jdrok5026]

@@godfreypoon5148 than top fuel is not for you lol.

[@jdrok5026]

@@godfreypoon5148 it's like drugs man that cackle would be better than the hum and whine of the diesel and gas gens

[@cluisdotorg]

I think we have reached peak Uncle Bumblefuck lingo. Anyone not initiated watching this video would assume the narrator was in the throws of pitched fever dream. Fucking love it.

[@jackus217]

Are you sure you have been growing the CBD strains, I'm not so sure after this

[@corwinweber693]

Yeah, he's sure. He's not high, he's always like that. :)

[@steventhedog94]

@@corwinweber693 high all the time?

[@MrLifeissomething]

This American just had a seizure reading that knife tweet.

[@twinturbotaj]

I replaced a single rod bearing in a Mitsubishi 4g64 engine in a Mighty Max truck that had been knocking.. My little bro is still driving it still works fine. Send it!

[@agentjwa]

wish he would have tried this, worst case ontario yer out $10 if it eats the new bearing

[@twinturbotaj]

@@agentjwa No, if it eats a new bearing quick you were already out much more for a full engine rebuild including probably a crankshaft and at least 1 rod, but that's also the point you were basically at when it started knocking especially if you didn't tear it down IMMEDIATELY when noise stared. Anyway, I carefully polished that crank journal first with fine sandpaper/WD40/shoelaces to spin the paper, and the rod was still fine, and I did end up replacing all 4 rod bearings. 4G swap the world..

[@diltzm]

Did the same with my Volvo 850, 10k miles at 20psi later it's doing just fine.

[@aussiebloke4601]

I have rebuilt over 100 4G54 engines and have found them to be tough as nails. It's a 2.6 litre Australian made mitsubishi engine.

[@daviddroescher]

I have an adaptor to allow the 2.6 car block to be installed aith the 4x4 /diesel transmission due to split cylinder wall and cracked head and no 4x4 cores to be found.

[@JasonKerlin]

I am a diesel mechanic, and I approve this video. Sounds like our shop....

[@evolati12]

Hey AvE are you gonna tell William S. Burroughs “Junkie’s Christmas” again this Christmas? You tell that damn good story damn good!!

[@scruffy6151]

I agree.

[@jason-ge5nr]

oh please its a tradition

[@AK_Ray]

Didn't do it last year

[@ronkennedy213]

Yes please sir, I want some more.

[@KentuckyDogg]

That was the best Christmas Eve story.... Wore my Spanx while watchin !!! Merry Christmas !

[@69adrummer]

A "chicken tendie" reference no less! lol holy fuckballz!

[@joecnc3341]

Enjoy your videos, and your humor. I still haven't figured out if you're a Newfie or not... you're definitely Canadian with the Canadian Tire bucket....

[@glennfonner4966]

Shake hands with danger was narrated and sung by Harry Morgan from MASH

[@5roundsrapid263]

You’re right! I can totally hear it now.

[@fredhelmecke6073]

@@5roundsrapid263 That made a good show even better...nice touch.

[@pileofstuff]

@Glenn Fonner: That's not what IMDB says. They credit Charles Oldfather with the narration and also a musical soundtrack credit.

[@scottr939]

Funny, but not true. It was a guy named Charles Oldfather. Jim Stringer wrote and played the music.

[@ironbomb6753]

"keep going til you fuck it up" I may have to steal that one 🤣👍😎

[@oscar.gonzalez]

The knockers I love come in pairs and normally bounce up and down .

[@georgemcmillan9172]

Agreed!

[@zerg9523]

I hope i live long enough to watch at least one episode of zero g porn...

[@5roundsrapid263]

You have to have some good framing to hold them up, though. You don’t want them dragging the ground after a few years.

[@johnrutkowski9005]

Did you try oiling them?

[@tiredoldmechanic1791]

@@5roundsrapid263 When they start dragging, you trade them for a new set.

[@kylelyons5878]

"what color is the sky in this fucking world" love it

[@brandonobaza8610]

13:45 Never saw discoloration on a crankshaft like that before...not that I rebuild engines. Looks like some new form of heat treating: selectively localized, intense, and unintentional.

[@legros731]

Normal for diesel engine crankshaft the journal are heat hardened Buy a brand new one and it will look the same

[@314sami]

In Finland they have a saying which goes something like this: If it works at half the power after the repair, the process was great success :D

[@analogdad9235]

“We have found the never seize factory”. Love this dude.

[@dennybronwynbennett]

I don't know what's funnier. The voice over, or listening to your inventive invective live. Thanks for the laughs Uncle Bumblefuck.

[@backwoodsengineer]

I used to laugh at safety. And I still do.

[@heronguarezi6501]

Are you called 3 finger Engineer?

[@backwoodsengineer]

Heron Guarezi Not yet

[@CheekyMonkey1776]

“Three Finger Joe” hahaha! I knew a guy called, “One Arm Mel” years ago. Lost his arm to a rendering plant auger.That batch of dog food had a little extra flavor. What? Did ya think they were going to discard it due to a little extra protein and Timex watch parts? Never.

[@Ezrider359]

the other rod is shot as well notice the discoloration on the crank.

[@FrozenPaint]

You sure that's not from the surface hardening process? It's around all the journals including the mains.

[@paypwnz]

it might be from the hardening process

[@MichaelRadelet]

That's from the induction hardening of the journals.

[@JasonW.]

Forced D&I training has required we accept a steel crank that wants to identify as taffy

[@ColtaineCrows]

Been a while since I've seen a crank that isn't blued right outta the factory. It's localised heat treating, besides, that bearing more likely got smashed before it spun. That poor gennie, only running at idle, filling the oil with soot, it's hell on bearings.

[@Floofian]

I just randomly got the "shake hands with danger" video a few days ago... brilliant. Although it can be summarized in one sentence: "dont be a f*cking idiot"

[@grosseileracingteam]

I live in Detroit and never carry a knife. I carry 3.

[@interstellarsurfer]

And the Liberty Dispenser is in the fourth pocket. 😁👌

[@tomast9034]

one for every hand? :D

[@doubleboost]

This is what i do for a living Really enjoyed the video Regards John

[@watsisbuttndo829]

Oooooohhhhhh you boys got lucky, when that engine detached from the gen and lurched foward i though " somebodys buying a new intercooler for christmas!".

[@dragster46]

How weird This is my everyday job But I find myself drawn towards watching Just wish my engines were as clean to work on 👍

[@horacegentleman3296]

I know right every time I have to touch an infernal combustion contraption it's so many layers thick in baked on shmoo you gotta blast it for ages to find the nuts.

[@Paulman50]

EV running the generators will be nice and clean.

[@almostanengineer]

As a certified operator, I nearly cried for that poor poor forklift having to deal with that janky extension 😢

[@justinscott3001]

"certified operator" hahaha it did the job, no harm, no foul

[@mobilepolice]

Looks like you got more than one bearing to replace there if that was the plan. The one next to the one you took off looks like it was overheated itself.

[@boominrick1987]

I saw that also. Looks like all of them ran out of oil.

[@NitroAl]

They all look cooked

[@NitroAl]

@@justjoe7313 Is induction hardening commonplace for diseasels? Can't say I have seen it myself but I mostly work on small engines and don't do diesels at all

[@legros731]

@@NitroAl really common

[@mobilepolice]

@@justjoe7313 makes more sense now.

[@RMquickbit]

Coveted like the last chicken tendy at the Comic-Con hahahahahahahaha where does this shit come from

[@TonyFleetwood]

i used to do this diesel gahbage for a living... now i work on mazaks, okumas, etc and roll around in oil, coolant and metal chips... good times.

[@DFBrews]

Tony Fleetwood how was the transition? I’m in the truck dealer world and want a change

[@TonyFleetwood]

@@DFBrews not bad, slight learning curve, but still turning wrenches... just have to learn the computer side of it.

[@roguewarr4662]

As a engine builder ,AvE you make me laugh ..love watching ,you are a true RENAISSANCE man .

[@Alex-hongry]

I didn’t understand a good goddam word but I felt at times like I did and I liked it.

[@alec4672]

Good ol 3 finger Joe, classic. Back when hr was 3 people who didn't feel important yet

[@FPSthomas]

Whats that "shake hands with danger, they call me three finger joe" called. I gotto play that in the back ground next time im in the office!!

[@5roundsrapid263]

It’s a CAT safety film from 1980(?). It’s all over the tubes.

[@DavidDDavidson1337]

Incidentally I just watched it today it's from an old CAT safety video about not putting yourself in stupid positions.

[@JasonW.]

@@DavidDDavidson1337 CAT corporate should take their own advise

[@chaddesantis4191]

Love it!

[@FPSthomas]

Haha thanks guys👌 cool vid👍

[@mythril4]

I rebuild piles of diesels, I'd definitely pull that crank, measure and polish if measure is good. Replace all bearings, not just the one, you'll regret not doing so. May as well hit up the pistons and liners, it's surprisingly not hardly any more expensive for most engines. I work with a crane and drilling company, it's spoiling to have 45 cranes to choose from for plucking whatever out of whatever.

[@burn31]

That Fram filter is your problem right there partner 😂

[@Pro_DRIFTZ]

they used it just to see if the engine would run it was already fuckered before

[@Vince-DM]

I saw FRAM on that filter, and I immediately went to comment the same thing you did - but I was twelve minutes too late lol

[@renof2505]

@@Vince-DM You realize he put that on AFTER the bangy bangy noise problem. No reason to buy a good filter just to fill it with glitter.

[@5roundsrapid263]

He put that on it in the last video. It still had the machining swarf in it!

[@burn31]

@@5roundsrapid263 whoops, missed the last vijeo. My bad.

[@DaJesta088]

Found your channel a couple days ago... Dude, I don't think there's a channel on the KZbins with a higher laugh/minute ratio if Gentle Watcher can follow along with your Canuckistan mode of speech... Love the channel, Merry Christmas!

[@oldfarmer4700]

And..............Time!!!!

[@rynstrs]

No angle grinder or circular saw?

[@tonyhawk8461]

oldfarmer hahaha. Right on. 😂😂🙃

[@RK-kn1ud]

You've got some serious oil starvation issues there...every main and rod journal have been cooked with heat. You may have found the reason already, but that engine was run completely dry...for whatever reason.

[@ivo215]

It takes quite a bit of heat to blue steel. And it looks like that heat came from the big-end pins.

[@georgegibson707]

Could it run dry if they simply didn't top up the oil frequently enough ?

[@johnpossum556]

Doesn't it have a low oil sensor?

[@dandoherty1375]

Who pulled that thing on a trailer with 500 gallons of diesel?

[@trailertrashlee2778]

They were in Mexico at the time

[@rymes14]

Wait until you find out how they transport diesel.

[@sleeptyper]

Once it's off the public road and in thru the door, nobody cares.

[@stimpy02000]

That long winded Canadian

[@matttradie1341]

Yep and on the back of the wifes mazda.

[@tmmtmm]

"we're not building a race engine". Aww damn, was hoping for a racing generator build.

[@PSUQDPICHQIEIWC]

Nice generator, gramps. What's that thing do? 60 Hz? hahaha [cranks generac up to 100 Hz]

[@tmmtmm]

get 'er on 50psi boost and power the whole neighbourhood

[@LaterMeansBrick]

*slaps generator on top* This baby can hold so many Amps.

[@DiscoFang]

It's the current trend.

[@TheBackyardChemist]

400 Hz aircraft power

[@cindyeva7454]

Love the ol shaking hands with danger song mixed in,21 years ago in tech school tjey made us watch that old video,classic lol

[@daveouterspace]

Thank you AvE . Another excellent video

[@DaveJMcGarry]

Popped up in my recommendations, subbed because i have not laughed so much in ages! Keep up the good work.

[@xxxxxxxxxxx82]

You got a lot of the funniest content on KZbin to work your way through now 😁👍

[@codemiesterbeats]

The truly sketchier'n frig part? The FRAM earl filter.

[@theryanwitski]

When that engine started up I felt a pit in my stomach... Then I remembered it's not mine so best if luck fixing her boys. Maybe you can get a sponsorship from Lucas oil saying their snake oil could have prevented this...

[@Muffinrando]

Some of your best work yet. Must be the Pilipino helpers union pissed they didn’t get in on the action. Three of them giving you the thumbs down. Can’t please them all.

[@jaimieboy999]

I'm not enjoying Christmas this year all's good but hope you are having a good one ave. Cheers from Scotland.

[@BigSmartArmed]

Don't let Greta bring you down!

[@JasonW.]

Have a merry brexit, I mean, britmas, and a happy vice year

[@xxxxxxxxxxx82]

@@BigSmartArmed HOW DARE YOU! LOL 😂 Don't smoke while bbq-ing, you'll give your kids ashburgers 😉

[@BigSmartArmed]

@@xxxxxxxxxxx82 hee hee heee ;)

[@erikb1252]

Keep it up, next year will be better ... That's what keeps me going the last 5 years. And slowly it does ... Don't let these suckers bring you down!

[@gabewright2690]

The day after Christmas I'll be doing a inframe on a CAT 3406E in one of my semis it will be fun.

[@killogsfruit2445]

Loved the shake hands with danger part😂 *guitar riff plays*

[@ericjohnston6035]

She got a rod being spun right round like a record baby right round round round round