Disassemble Your Garbage Disposal in Less Than 5 Minutes!

Will I be able to repair my NASY GARBAGE DISPOSAL!? Or will I have to fix it???
Thanks for Watching! If you like what you watched... Please give us a thumbs up and Subscribe! Don't forget to click on the Bell to be updated on more uploads!
********************************************************************
Buy Your KalindsLife, JigginJunkie and Crawlspace Craftsman Merch Here:
www.Kalinds.Life
Check out this link!
linktr.ee/kalindslife
********************************************************************
KalindsLife
1003 Mulford Ct
PO Box 1077
Knightdale, NC 27545-1077
*********************************************************************
Want to help support our channel and drive to offer better content!? Visit our Patreon page at the link below and become a Patron of ours with a small support donation. This will give us the ability to do what we love and upgrade equipment, buy props and items for new videos and much more! Thanks so much for considering!
/ kalindslife
*********************************************************************
Click on the link below to order some AWESOME KalindsLife and More items!!! We get a small percentage of each sale and put all money made back into the channel so we can continue to make fun and exciting videos for you to watch!
shop.spreadshirt.com/KalindsL...
*********************************************************************
Also don't forget to Follow us on.....
Email: [e-mail]
Instagram: @KalindsLife
*********************************************************************
Filmed On: GoPro 9 w/ Media Mod
Edited On: iMovie
Thumbnail Image: Thumbnail Maker
Microphone: GoPro 9 Media Mod
Music: EpidemicSound.com
*********************************************************************
#garbagedisposal #garbagedisposalrepair #homerepair

[@marcusstephenson3821]

What size nut driver did you use for the bolts that hold the bottom to the top?

[@TheCrawlspaceCraftsman]

Heya Marcus! Sorry I don’t have the exact side but it’s just a 1/4” drive screwdriver with a long socket. I can’t remember the exact size buts is smaller than 1/4” for sure! I wanna say 3/16”.

[@Schapezak]

It's 3/16. Just did mine

[@plo1986]

Good video. A little secret. There is an allen screw on the bottom. Insert allen wrench and turn it until it turns freely. This will dislodge whatever is lodged in the disposal. Also drop a 1cup baking soda and 1 cup vinegar about twice month and it will keep it clean and and fresh. Every now then drop half lemon with running water to smell lemon fresh.

[@TheCrawlspaceCraftsman]

You are why I love KZbin so much! I put videos out because I love making videos and if I can help someone in the process then even better!! And then people like you come along and give even more tips and tricks! I also appreciate how respectful your comment was! Thank you so much for watching and commenting!!!

[@gimaru1821]

Not all have the screw on the bottom underneath although this model probably has it. Great tips for cleaning!

[@SlimNubster]

The Allen technique didn't work too well for me. I'd free it up, but then it would get stuck again. Gonna try opening it up... looks like fun.

[@ClarkPotter]

​@@SlimNubsterSame experience as you, which is why I'm here.

[@Atreus21]

Yeah mine was worn down and stripped so I had to take it apart like shown here.

[@loganbecker212]

Thank you so much! Didn’t know if it was easily disassembled and reassembled, makes me much more confident on fixing it myself!

[@TheCrawlspaceCraftsman]

Awesome Logan! Glad it helped!!!

[@ethanhorton9005]

Thank you so much! I followed your video step for step to clean my garbage disposal. It hasn't worked in 3 days and this was my final effort before calling my landlord. Works perfectly now!!

[@TheCrawlspaceCraftsman]

Let’s go!!!! Glad it helped!!!

[@abhuram1]

Thank you for this video. Especially how to completely open the garbage disposal bin. Was able to salvage it and squeeze more life from it.

[@TheCrawlspaceCraftsman]

Awesomen! Glad it helped and thanks for watching!

[@ironloins]

Bro! I did exactly like u said. Found a broken nail down there, works like a charm thsnks!

[@TheCrawlspaceCraftsman]

Glad it helped!!! Thanks for watching!

[@ThatHobby]

That was awesome!!! My mother in law dropped a glass in her sink. I thought I was going to have to take it apart too but I was able to get it spinning again with a broom handle. Glass is crazy!!! It breaks like it's nothen but then it jams up a disposal like a rock.

[@TheCrawlspaceCraftsman]

Hahaha! Thanks!!! It’s bad what’ll go down a drain after a week or so!! LoL

[@TheCrawlspaceCraftsman]

Didn’t realize there’s little ridges on the side wall that the glass will jam into. That’s what happened. The second I took the housing off it fixed itself.

[@pritdutta2296]

Very useful video, the happy dog in the background on Sofa telling all.

[@TheCrawlspaceCraftsman]

Thanks so much! The dogs are all spoiled! LoL

[@CAAMx]

Thanks for the video. My wife dropped a glass spoon in ours and now its jammed up. I was told that this weekend i have to get it fixed or the dishes will keep piling up in the sink. 😂

[@TheCrawlspaceCraftsman]

Hahahah!!! There is an Alen Key at the very bottom center under the disposal. If you can turn that back and fourth sometimes yon can bust the item enough and it will break loose.

[@dennisdain987]

Thank you. My wife dropped a finish nail in mine and it's lodged under the blade area. It spins but I can hear it rubbing. I was looking for a video to see if these could be disassembled and found this video. Amazingly, I have the same disposal. Now that I know I can take it apart, I will go do just that. Thank you.

[@TheCrawlspaceCraftsman]

Awesome! Glad it helped out! Don’t be surprised what else you find! 😂. Thanks for watching and commenting!

[@dennisdain987]

@@TheCrawlspaceCraftsman, thankfully it was still working but I could hear the system rubbing on the nail. So I did not have to deal with same amount of 'yuck' as you. Once I removed it from under the sink, I could see down into the blade area and I was able to pry out he nail without having to split the case like you did. Surprisingly, it was a smooth operation and all is well. Thanks for your video insight.

[@theanxiousbench]

Love this vid! Super funny

[@TheCrawlspaceCraftsman]

LoL. Thanks for watching!!!

[@colorowjohn627]

Ur video helped me, thank u

[@TheCrawlspaceCraftsman]

Awesome!!! Glad it did!

[@theshindigg]

For testing at the end, you could also plug it into a manually tripped GFCI outlet for a bit of extra safety.

[@TheCrawlspaceCraftsman]

100% great idea!!! Thanks for watching!!

[@PAPATexas]

Got to love a Badger!

[@chinna7222]

Thx for the video. This is exactly what I needed. I figured, I am missing a part. Can you post a link where I can get the screwdriver attachment used at 3:51 in the video. Basically the black attachment to separate top and bottom parts of the garbage disposal. Thx.

[@TheCrawlspaceCraftsman]

Sorry I don’t have the exact side but it’s just a 1/4” drive screwdriver with a long socket. I can’t remember the exact size buts is smaller than 1/4” for sure! I wanna say 3/16”.

[@trumpetman961]

Thank you for the video! I had some issues with my disposal and was able to get it fixed with this help! I did notice a small leak a few hours later coming from the screws that hold the unit together, maybe 3-4 drops a minute. I was wondering if you also had any kind of issue?

[@TheCrawlspaceCraftsman]

I have not had that issue. I wonder if the seal has a tear in it? Have you tried to tighten more? Hope you get it worked out!

[@trumpetman961]

@@TheCrawlspaceCraftsman the screw’s themselves were pretty tight, I do worry it’s possibly a seal somewhere. My unit is very old, probably around 10-15 years old might need to just look into a replacement

[@TheCrawlspaceCraftsman]

Yup. It might be time!! About $150 to replace.

[@dianam9028]

😝 😆 Very helpful. I dropped a thumb tack down mine and now it hums but doesn't spin. I put my hand down in there, but didn't find the thumb tack. Guess I will try to take it apart. Thanks!

[@TheCrawlspaceCraftsman]

I hope you unplugged it first before sticking your hand down there! Glad it helped ya out!!! Thanks for watching!!!

[@dianam9028]

Oh i did thank you 😊@@TheCrawlspaceCraftsman

[@cgirl111]

Just about to start this job since the allen fitting didn't free it up. It looks to me that you could just unscrew the motor assembly and drop it without disconnecting the lines or removing the part that attached to the sink. Might be a little awkward getting it back on though.

[@TheCrawlspaceCraftsman]

Probably could be done but super awkward for sure! Thanks for watching!

[@jimsonaranda2512]

thank u

[@TheCrawlspaceCraftsman]

You're welcome!

[@liszettegarcia7999]

What do i do if the flywheel is still not spinning? Thank you for the video, I was able to disassemble easily

[@TheCrawlspaceCraftsman]

Hmmm… there’s gotta be something jammed still. GD are pretty inexpensive so if your doubtful, it may be better to just replace at that point.

[@stevenreznick4394]

Awesome video. Probably a silly question but the torque screw driver you used to get the little hexs out to remove the top from the bottom. What size head are you using and make?

[@TheCrawlspaceCraftsman]

Thanks so much! I can’t remember the specific size but it was a small tall socket with a screwdriver 1/4 adapter. It’s really nothing too crazy. Pretty easy to do!

[@KenStaude]

That’s what I’m looking for, 1/4 is too big

[@akanesoratobu8889]

underneath the garbage disposal theirs a area when you can use a hex screw to spin the blade if it gets stuck as well.

[@TheCrawlspaceCraftsman]

Sometimes that just won’t cut it! In my case the glass was jammed

[@chloetyler5053]

What is the tool you used to pull out those long 4 screws on the sides while taking it apart ? In the same boat! Thanks

[@TheCrawlspaceCraftsman]

It’s just an 1/4” drive socket screwdriver with a Long socket on it. Works perfect every time!

[@akanesoratobu8889]

when you put back the 2 plastic container do you need to apply any sealant?

[@TheCrawlspaceCraftsman]

No. It has a o-ring

[@jeannemcmillintwinlakeses3767]

Glass down the garbage disposer! Who the heck would do that???? Me also. Little glass bowl went down it in a flash. But I did not wait a week to fix it. Luckily when I got it outside the glass was already in tiny pieces and in the trap so we both got lucky. Was way easier to take out and clean up that I expected. Thanks.

[@TheCrawlspaceCraftsman]

LoL. If I remember right it was a shot glass for us that did the trick! Glad the video helped out some!

[@PAPATexas]

Nasty for sure. 15 or more years on a new one is no big deal!

[@alkanawellness]

What is the tool you used to unscrew the long screw things to actually open/split the two pieces apart?! I tried a 1/4in nut driver but it’s too big. The tops aren’t a normal shape

[@TheCrawlspaceCraftsman]

Sorry I saw this late! Did ya get it apart!?

[@microbhai]

@@TheCrawlspaceCraftsman please answer this question

[@jonathandrury8298]

@@TheCrawlspaceCraftsman so instead of answering the question you ask the dude if they got it apart yet?

[@microbhai]

So, I went to harbor freight and bought e-torx socket for $10, I think size E7 fits most of the machines. Try it out. Socket was meant to be used with 1/4 inch ratchet. With the ratchet extensions, it became like a screw driver.

[@Schapezak]

3/16

[@stephenchampagne5763]

Did you turn it underneath with Allen wrench and hit reset button

[@TheCrawlspaceCraftsman]

Yessir! The chunks of glass weren’t having it. LoL . Had to take apart for this one!!

[@PAPATexas]

I just replaced mine!

[@TheCrawlspaceCraftsman]

Super easy!!! Thanks for watching!!!

[@scottboy]

3:58 what tool is that? Im over here looking up "inverted hexagon screwdriver"

[@TheCrawlspaceCraftsman]

It’s just a Long Socket on a 1/4” Screwdriver style socket Handle. I can’t remember the exact size though.

[@tannerbrowningfilms]

Thanks to this video I gained 8000 xp in husband skills

[@TheCrawlspaceCraftsman]

🤣🤣🤣. NP!

[@jessesoto8887]

Hawt😋🥰

[@TheCrawlspaceCraftsman]

Thanks for watching!!!

[@ponygirl1717]

So the actual part where you undo the unit from the sink, you have obscured by your arm in the video... Way to go!! 🙄

[@TheCrawlspaceCraftsman]

😳😳😳

[@aspenpettyjohn5589]

I dropped fish tank pebbles in mine. Thought I got them all and kept trying to turn it on. Now silence when I flip the switch. Did I burn the motor?

[@TheCrawlspaceCraftsman]

There may be a reset switch. I would take it apart and clean as I did. Also check the breaker or GFI as it may have tripped the breaker. Hope that helps!

[@ingramandria]

Hit your reset button

[@TheCrawlspaceCraftsman]

Yeah that works in certain instances but when you litterally have glad jamming the rotating blades…. That won’t work!

[@rhinesguard1]

I just realize it has a breaker on the bottom. Red button?!😅

[@TheCrawlspaceCraftsman]

LoL. There is that too! Lots of peeps don’t know this! Thanks for watching.

[@TheAutumnWind_RN4L]

Is that a piece of brain?

[@TheCrawlspaceCraftsman]

😳. LoL

[@jdick045]

That’s not even gross….

[@TheCrawlspaceCraftsman]

Unfazed!!!! LoL

[@connorgillispie7128]

Really don’t need the fucking commentary

[@TheCrawlspaceCraftsman]

Really don’t need to drop F bombs either. 🤷🏻‍♂️

[@hansiman9262]

I unfortunatly burned down the motor. i must disassemble it and replace the copper wires of the rotor...

[@TheCrawlspaceCraftsman]

I mean if you’re good at that go for it! Honestly for a $150 or so it might be better to replace it! Good luck!!!

[@hansiman9262]

@@TheCrawlspaceCraftsman first I will replace it. Then I will try to repair the burnd one. I measured the resistance of the windings. And then find a super video from Pakistani people repairing such stuff which usually in Europa goes to trash. The only thing which is difficult to find is TIME to do that all