Supposed to add spice after cooking diluted it by adding to water

Maybe a dumb question. Does the solar panel need full sun to charge the camera? My front yard does not have much sun and is mostly shade. Can this still work?

Think you can use this with the wood shop tools? Sander? Table saw? Router?

Am I the only person that can’t believe he put rice in it?

It takes 1 passes to cut through 1/8" ply with my 20W. My $30 is set to 1 as well as my S-value. Is the key to make sure they match or is my output being impacted by the low settings?

Why music to cover the noise. Thumbs down

Can you help me… I have the same machine. It work well for a while and now it chats wrong 9/10 times… random cuts etc… I’ve bought this in the hope it will help

Hi, I bought it but I have a problem with the Y axis. It doesn't move properly and gets blocked. The motor tries to continue moving but it gets stuck and the cuts get damaged. Do you know what could be happening? Any suggestions?

I bought a CL-4x4, because of your video. I have set it up but if I put a standard 1/8 end mill and drop Z all the way down. I am still .500 -.600 off the spoil board. Can you please tell me the distance from the bottom of the spindle clamp to the bottom of the collar nut? Is there any risk to lowering the spindle? This little 400W (underpowered) spindle seems like I would get some run out if I put too much below the mount. Any advice would be greatly appreciated.

what happens if I do not set the probe after changing bits ?

Hmm thought he said plans were in the description?😢

very nice job, your home theater room is awesome congratulations !!!

I’m about to get one from Amazon Black Friday special. Do you still recommend this product?

Denailer is fun….and sketchy.

I’m trying it now

My biggest problem is cutting small intricate designs (right now snowflakes) without scorching the daylights out of them since I use 2 passes. Tried blue tape with one pass and didn't get thru the wood. Two passes and it's toast. Tried high speed/high power, up and down, mix and match. Checked device settings and yes, it was at 1000. Dropped another 0 on the end and will try again on a single pass with a higher speed.

Great job. Thank you 😊

I love these!!! ❤

Thanks for the videos. Really helps us decide although I'm still battling in my head which machine to get. This one is super impressive. But i have a question about laser engraving. If i want to do some etching on wine glasses in addition to all the regular wood cnc stuff, is it better to keep one machine to do it all out have a dedicated machine for that? This machine doesn't have the roller option but the FoxAlien does. But it seems you would have to raise the whole machine up and remove the bed to get the roller in and the clearance above the glass. That's why I'm wondering for the cost of the laser and trouble switching out all the time would it be better to get something like the Genmitsu kiosk to dedicate the laser duties. Thoughts?

So it just uses an air compressor no electricy power right?

are these 110vac

Hi. Can you cut completely through wood with this or only engrave? If you can completely cut through wood, what is the max thickness of wood? Thank you

I like mine less crunchy ...lightly crunchy. I'd probably try 5 rounds of 5 minutes. 😊

Is your air fryer coated with Teflon? Is there such a thing as an air fryer without Teflon? That's the only thing that's holding me back from getting one. 😟

Just checked my settings and both machine and device settings are set for 1000 for the max s speed. I'm taking it that since both are the same I should be getting proper output with my laser. Would I be correct on this thinking? Nice video. Thanks.

Question, what is the shank size to fit CNC Router Masuter Pro 1/4 or 1/8 or they supplied collet to fit both?

If you have time please visit Pearl and Pine, she is a lady with amazing wood art. And I think The Masuter 4080 will do the cutting, and I just shaping it with orbital sanders or can Masuter do the 3d of that?. please watch even 1 short video of her. Thanks and let me know what you think please

I just wanna show you what are trying to achieve when I buy the Masuter pro 8040

That's the machine I'm aiming for when I'm back in Sydney Australia. can you tell me if can that machine can cut 3/4 mdf. mostly that will be my main materials

One handy tip for de-nailing that will save your back. Cut the end off a pry bar and weld the claw to a steel plate that you can bolt onto the edge of your bench [or a post in the yard] I had several of these of different sizes and angles all on one plate, and they save a lot of bending and since you are presenting the wood to the claw, you have the advantage of a lot of leverage

Less than 100 dollers, 6 years later that desk iw worth a cool quarter million in lumber 😂

I like it to have no belts, compared to Masuter 3s.

what software you cxan use with that machine?

Dont need to see the Video, just listen to your Voice. And what i know is that you are more a FA Guy. Thanks for the honest review, it helps a lot. I choose the Masuter 3s

Flexible wasteboard has been a problem with FoxAlien and other machines fror long time. Support board underneath helps

We have an ender 5 plus printer. There is a problem with the Z axis while calibrating. Is there a way to reset the printer to factory settings?

Is there something that looks more like wood? What am I looking for in the store? Is it called transition pieces? Threshold?

Hello. Are you still happy from using this machine? I am considering Stepcraft M1000, FoxAlien CL-4x4 and Vasto XXL and still don't know which should I buy :/ I want to mill in aluminium too.

Does this work well with acrylic sheets purposely for signage

I live like 5 min from there

I have an xtool D1 Pro 20w, in lightburn I do not have the s value setting. I am running the latest version. Is that setting based on the brand of laser?

I gotta take mine apart The hex key method isn’t working

Love this short!!! ❤

Brilliant demo and now I know how . Thanks Just 3c here in Ireland 😂

how to control power of the laser on grbl?

on a atomstack a24, both my values picked up 1,000 (was manually added, it did not automatically find the laser). Since the a24 has 600mm/36000rpm speed, can this go higher? I feel like it's not unlocking its full potential of a 24w laser as i see in review videos for material tests

Thanks for sharing your experience with us on getting different cuts ❤😊

you forgot to put the link for the belt drive belt

Just got one from Power Tec and it was broken and bent. Trying to get it replaced now.

Which one is newer dream or wish?