You don't have to apologize so much. This is great quality compared to all other dye videos I've seen! It only it were easier to get iDye in Sweden I'd be all over trying this!
@TheKangazoo4 жыл бұрын
ioweutube2 discsport säljer idye. Testa där. :)
@sunesnigel3 жыл бұрын
Jag har köpt ett pulver från Amazon. Gillar inte att handla från Amazon men det finns ju inte så mycket till alternativ när det gäller pulver. Får se hur detta färgningspulver fungerar.
@danielcook49184 жыл бұрын
This is awesome. Also your voice sounds a lot like Jeremy Koling
@guelphdgc79954 жыл бұрын
Hey Daniel Cook from Kitchener, how are ya? Thanks for the video! I've got some prosperse coming, can't wait! That blue is insane! Thanks for the qtip trick, I've always used straws and had accidents where a bunch falls out.
@dye2disc6254 жыл бұрын
@@guelphdgc7995 you will love it! I need to place another order.
@dye2disc6254 жыл бұрын
Hey Dan! Thank you! I hope other people think that. I love that guy!
@danielcook49184 жыл бұрын
@@guelphdgc7995 that is me! My glo leo3 I picked up from the ace race is still in my bag. Looking forward to ace race 2020! 🥏
@KankleBaby3 жыл бұрын
Great video, it was really cool to see that you get the same results as the cone mound method. Making the cone was really the only thing keeping me from trying the "time warp" method but the way you do it is waaayyyyy easier/more simple while achieving the same effect. Thank you!
@darreno98742 жыл бұрын
Great video thanks for taking the time to show us. I'm amazed at how vibrant the discs look for so little dye. God bless
@Vhreez4 жыл бұрын
Just getting into dying discs.. can’t wait to see more content! Beautiful disc!
@dye2disc6254 жыл бұрын
Head over to my Instagram! But I'm on the search for a few discs to get some more videos out.
@ianlaidlaw51993 жыл бұрын
Nice looking disc, I see I've been too heavy handed on my powders to get streaks like yours. Thanks for the insight! Subbed
@taston893 жыл бұрын
Chandler Fry one of the nicest Disc Golfers
@rachelmacarthur68023 жыл бұрын
Yay, a video from a Mainer! :D Thanks; gonna try my own today.
@b-radg9163 жыл бұрын
SWEET!! You didn’t add anything after the dye powders, right? At 14:35 you said that none of it was dry so should still get color… the only moisture in this process comes from the shaving cream, yeah? Thanks for sharing!
@edgerunnerproduction4 ай бұрын
What is it that gives it the streaks? Dropping it? Or pressing it in?
@colescomicclaims Жыл бұрын
Awesome video! Can't wait to give this a try!
@saltedliquorice4 жыл бұрын
If you had put the colours down in the opposite order wouldn’t the lighter colours come through more? Also how long did you wait for the colours to absorb into the foam before adding the disc? Thanks for the great video!
@Music4all4Music1233 жыл бұрын
Why is idye such a pain to get a hold of ? I cant find it anywhere except on amazon. Also are those custom jars for the idye or are those the pearl ex powered pigments?
@Adam-rs8wm3 жыл бұрын
I'm sure you don't look at these anymore, but in the off chance you do, what did you use as you base to put the shaving cream in? Pie pans I have found out kind of suck for this
@novembertrails3 жыл бұрын
A frisbee...? It's in the video mate
@para94702 жыл бұрын
First time dyer here! Followed your steps and now I just have to wait 8-10hours
@QuasiHero4 жыл бұрын
what type of idye poly do you use? Does it matter if it's the one with the color intensifier?
@dye2disc6253 жыл бұрын
it will come with the color intensifier. i don't use it for this style dye, but other styles can use it.
@jsmelgreen4 жыл бұрын
Great Video. How much warm water do you add?
@dye2disc6254 жыл бұрын
I gotta be honest. I eyeball it and go by feel rather then an actual measurement. Because different shaving creams have different consistencies I will admit it's hard to put into words. But once you do a few it's easy to see the different effects you get based on the consistency of your shaving cream bed.
@StevenRWeaver4 жыл бұрын
How does getting the streaks work with just putting powder down? I assume it's when you push the disc in the due slides along the top of the disc?
@dye2disc6254 жыл бұрын
Yeah the streaks come from the disc pushing down. I usually give it that push to help it along. And the light weight on the top and gravity do the rest. That's why it's important to use a container that leaves room for the shaving cream bed to push up around the disc.
@digital-rain4 жыл бұрын
Is it possible to re-use the same shaving cream/dye bed to dye the other side of the disc too? Or would the dye be all gone from the shaving cream?
@dye2disc6253 жыл бұрын
Some people have had some success with reusing the shaving cream bed. However I haven't really played with it.
@Stephenash224 жыл бұрын
dude this is awesome, great vid
@ColesDiscJourney Жыл бұрын
Nice will be using this as a guide. Thanks!!!
@tomwalters31594 жыл бұрын
Happy Holidays! i loved the video, and i have a question about what type of dye to use. would the "PROSPERSE DISPERSE DYES" be the correct product line to buy from Pro Chem?
@dye2disc6253 жыл бұрын
Hey man! sorry for the late reply! but yeah the Prosperse dyes are the correct one!
@tomwalters31593 жыл бұрын
@@dye2disc625 ive since bought THEM ALL!
@sunesnigel3 жыл бұрын
Great video!
@zackmcgowan55464 жыл бұрын
Where did you get the pro chem dye
@dye2disc6254 жыл бұрын
prochemicalanddye.net/prosperse-disperse-dyes.html And this is the starter set. You get a few colors. prochemicalanddye.net/all-dye-samplers-starter-kits/samplers-starter-kits-for-polyester-nylon-acrylic-acetate-rayon-ingeo-dyes/prosperse-disperse-dye-sampler.html
@coho5564 жыл бұрын
definitely will be trying this, thanks man.
@jyra76044 жыл бұрын
Does this work with idye polys?
@dye2disc6254 жыл бұрын
Yeah I use both Idye Poly and Pro Chem
@demTICKSdoe4 жыл бұрын
Shoot I rewatched this after I put mine in the bed. Pretty sure I used WAY too much dye lol. Guess I'll find out tomorrow! =D
@b-radg9163 жыл бұрын
How’d it turn out?
@cruisergear96013 жыл бұрын
Turned out 🔥💯
@Nakapeesh4 жыл бұрын
the only vertical video worth watching
@dye2disc6253 жыл бұрын
damn. Huge Compliment. Thank You!
@michaelnewell96624 жыл бұрын
great how to!
@kevinrackley27474 жыл бұрын
Why add water to the shaving cream? I've seen a lot of mixed theories on this step
@dye2disc6254 жыл бұрын
That's a fair question. Some people enjoy doing the Mound method. The water I believe helps add moisture so that even if you do add a little bit too much powder it will still be wet. But for sure it helps allow the disc to sink. Which will give you the streaks we were looking for in this video. Feel free to go check out my page for some of my other works. All that I did using this style had water added to it.
@kevinrackley27474 жыл бұрын
Cool thanks
@ShacknastyNick4 жыл бұрын
Does this method work on clear plastics, such as innova champion or DGA sp?
@dye2disc6254 жыл бұрын
I find I have been underwhelmed with how it tends to appear on those plastics. For those I use either hair dye or Lotion and worm Dip. Two other methods I will try to cover