That may be one of the most thorough explanations about dying I've seen yet. Thank you so much for going through all the work it took to put this out. Really enjoyed it.....clearly....I just sat here mesmerized through a 40 minute clip.
@chrisl99636 жыл бұрын
Xander Zaretzit thanks. I tried to edit it as short as possible but it was hours of work
@xanderzaretzit2966 жыл бұрын
no name You covered so many things as well as multiple disc projects, I think you explained a lot in the time you had from good things to disappointments. Anyone who's serious about learning this will take the time to watch. Excellent video in my opinion.
@chrisl99636 жыл бұрын
Xander Zaretzit thanks!
@Bradley139834 жыл бұрын
What if I don't have vinyl? Can I just use lets just say a piece of paper?
@TheDifferenceisDoingIt3 жыл бұрын
This is where is started...
@SanDiegoDiscGolf28 күн бұрын
Great information, and a complete walkthrough. Thanks 💪🏼🥏 I don’t plan on dying my discs, but i now have the knowledge to do it. Those looked really good and you explained the process very well. 🤙🏼
@RobbyMaQАй бұрын
Cool. As a vinyl sticker guy with 30 yrs experience, i recommend investing in a bondo squeegee on the cheap. Credit card works betterer than your fingernail or a spoon. Also work air out from the center outwards, not one side to the other when applying a decal. I'd also probably have it cut with a circle to aid in alignment. This can be done by laying the disc onto the decal, just getting the decal to tack onto the disc. Then carefully flip and squeegee the sticker down. Makes for easier aligning and isnt going to cost much more since you're paying per sq inch. But great creativity!
@catherinewarburton82022 жыл бұрын
Thanks for this video. I was working on trying to learn my Cricut, and got to give my husband a new fun disc in the process. This surely won't be the last time I do this! I appreciate your clear instructions.
@swain3325 жыл бұрын
You really couldn't have explained it any better. this IS the video i've been looking for! Thank you!
@brettroberts88326 жыл бұрын
I used to lay vinyl stickers for a living. Using a credit card to lay your decal helps you not have bubbles. If you do have a bubble poke it with exacto and press the air out with the card
@dopestarinc695 жыл бұрын
yeah but ink can bleed thru, when i do that i patch the hole with glue but i try not to do that
@slackminer89744 жыл бұрын
Such an explanation of the process and very easy to listen too. I thoroughly enjoyed watching this. I also have a massive craving for chicken wings from that parchment paper box after staring at it for so long.
@chrisl99634 жыл бұрын
Ha thanks a lot
@ctuck1573 жыл бұрын
Thank you so much this was such an educational video. I love how you really took your time in this video and explained a lot of things in depth so we understood why better! I watched this after already doing my first set of dyes im bout to take them out in a few hours, this will be my next method to try no doubt
@RokinRobinTweet3 жыл бұрын
Love the last fallout themed disc! Nicely done! Thanks for your time and tips✌️
@unsilenced_dissenter6 жыл бұрын
Mad skillz sir! I just started experimenting with different techniques for dying discs a few months ago. This is the best how to video I've seen on how to dye discs. Thanks for sharing.
@chrisl99636 жыл бұрын
Duhaimejs thanks for the kind words
@acdg74312 жыл бұрын
This is awesome! Thanks for teaching. I’m excited to dye!
@kenns1690 Жыл бұрын
The best dye tutorial I've seen yet. Awesome job. Just a quick question: if you have troubles with clumping, have you ever tried the top to a salt or pepper shaker to break it up? I mean you put the powder on like seasoning anyways 😂
@Frostyy14--5 жыл бұрын
I have no desire to dye any discs myself but this video was very interesting and entertaining non the less!!!
@TheDifferenceisDoingIt6 жыл бұрын
Amazing tutorial! I've watch it through three times now. Lit a fire under me to finally try dyeing myself, even made a little video of my effortss too. Credited your teachings and linked to your video here, thanks again!
@DiscGolfCoursePreview3 жыл бұрын
Is this what started it all? :O
@TheDifferenceisDoingIt3 жыл бұрын
@@DiscGolfCoursePreview you sniffed it out...well done!
@xanderzaretzit2963 жыл бұрын
@@DiscGolfCoursePreview Great Work, Gumshoe!!! The TDIDI origin story marks a particular chapter starting right....here!!
@dougs81963 жыл бұрын
I assume there are other options but people who don't want buy paper plates all the time... I picked up some stainless steel electric stove covers. The small size is useless but the big one work well for dying and you can just wash it off.
@flare50262 жыл бұрын
Nice work! Gonna give it a go!
@RandyLynn-h3s10 ай бұрын
awesome video TYVM
@Forgivenofsins6 жыл бұрын
Dude that was freakin awesome. I'm going to try doing this one day and you made it so easy to understand. Thank you so much and keep up the hard work.
@nateionalbank11 Жыл бұрын
Does it have to be synthetic dye? Or would say rit all purpose work?
@SuperBejjan5 жыл бұрын
Where do you buy your material? The Idye i have figured out but where do you get the stickers and the plastic film from? I know you do your own stickers but you have to buy the stickers material and then you cut it on your own, so what is that sticker material?
@LastGrlStanding4 жыл бұрын
Fantastic video, thank you so much for sharing! Is there a reason you use the contact paper rather than just using a bigger piece of vinyl that goes all the way to the edge?
@grantloupe20592 жыл бұрын
Thank you for giving clear explanation in this video, it was extremely helpful! I just tried the stencil dye on a practice disc with just the black colored dye only (no other colors mixed in) and the dye took but it was extremely light. I let it sit for about 2 hours. What have you found to help get the colors to be darker or dye better on the disc? I was planning on trying waiting longer, adding more black colored dye to the mix, or heating it like you said. There is a color intensifier that comes with the dye, do you use these packets as well?
@ianandrew39732 жыл бұрын
Which dye/brand did you use? I use idye poly (same from this video) and it works perfect. I've tried other dyes and they came out very light at best. I always let the discs sit for 6-8 hours as well. Hope this helps!
@grantloupe20592 жыл бұрын
@@ianandrew3973 I use idye poly as well but didn’t let it sit 6-8 hours. I just tried my second attempt with more dye and will let it go 8 hours, hopefully it comes out darker this time (and I did it on a lighter colored disc this time)
@mayneric4 жыл бұрын
Awesome video. Thanks for the information. I wonder is wall or exterior adhesive vinyl would be better for preventing bleeding. My wife and I have a shirt business side hustle and have the stuff on hand. I might have to try it out. Thank you for the great video.
@devonterry93853 жыл бұрын
This is amazing! Regarding the air bubbles in the shaving cream, I wonder if putting it in a vacuum bucket/chamber would help? Just an idea.
@oswainvenzen3 жыл бұрын
Final Fantasy and Disc Golf ftw =)
@LMB98882 жыл бұрын
Great tutorial!
@antilla646 жыл бұрын
Where do you get your viynls from ?
@Judge_Jon3 жыл бұрын
Local sign shop, friend with a vinyl cutter, or your vinyl cutter.
@noahcapello9694 жыл бұрын
I know I’m super late to this video but I would love to know where you get those vinyl sticker stencil thingys. I would love to do my own stencil dyes but I don’t know where to get the stencils
@jussilaakso70654 жыл бұрын
Indeed
@RumpleGeist6 жыл бұрын
I have access to a nice cricut. Consider me inspired! Awesome video!!
@chrisl99636 жыл бұрын
RumpleGeist ty sir. Hope it helped
@smtroupe3 жыл бұрын
Does the circuit make it easy ? i'm considering getting one?
@sunnyside8322 жыл бұрын
Did you print your own stencils with a vinyl printer?
@MrZachary745 жыл бұрын
Do you do discs for anyone else? I would love to get some done and pay for them
@grendelum5 жыл бұрын
26:30 Sorry, but this is really funny as I had a similar problem frosting a cake until I found the *offset spatula,* an invaluable tool that does minutes of work in seconds...
@disc_golf_veteran4 жыл бұрын
These are some amazing designs!!!
@jonathanbuck42569 ай бұрын
Let's say I have a dark, forest green disc and I want to die a graphic onto it using the Chartreuse color. Will it actually change the color from dark to vibrant Chartreuse?
@chrisl99639 ай бұрын
Probably not but may lighten it a bit. I'd heat the plastic up with boiling water, dry it quickly, use the worm dye
@jonathanbuck42569 ай бұрын
I wonder if bleaching first with the mask on, then dying it with the Chartreuse would work?@@chrisl9963
@dancinman77692 жыл бұрын
Maybe I missed it at the beginning, but do you make your own vinyl stickers or order them?
@chrisl99632 жыл бұрын
I cut them on a cricket machine
@TheEaglesReign6 жыл бұрын
Thank you so much I’ll be trying out my first dyes soon using the method with the pilot. Once you waited the hour or longer how did you get the paint off just rinsing with water?
@sw.5 жыл бұрын
20:27 - *Toto starts playing*
@chrisl99634 жыл бұрын
Lol hope the rain will mess up the dye setting in
@tomjohn85243 жыл бұрын
he even included madagascar :D
@TheAniswander5 жыл бұрын
Love your designs! What type of vinyl do you use? I have a Cricut and was curious if the Cricut brand vinyl is good enough for it or do you use Oracal651?
@TheKoyotetracker6 жыл бұрын
Hey man, great video. I have a question. I want to put red letters on a green section. Do you know if I should put the green down first or the red?
@jacobgardner91552 жыл бұрын
Can you remove stamps that come on the disc or do you have to get stampless discs
@kylearmstrong90084 жыл бұрын
Hey i love the video and was wondering what type of idye poly do you use
@shelleycampbell97573 жыл бұрын
What kind of vinyl do you use? I have a Cricut and my husband wants me to start dyeing discs
@ianroude3 жыл бұрын
I’m really late to this video but what should I do if I don’t have a place to make vinyl stickers. Should I just use normal paper and somehow stick it on there?
@chrisl99633 жыл бұрын
You can buy contact paper or vinyl sheets at any craft store or Walmart then cut the design our with and exactoknife.
@ianroude3 жыл бұрын
@@chrisl9963 thank you!
@Cad19003 жыл бұрын
Great video thank you 🙏
@Nick-jk8zw2 жыл бұрын
Is this method the same if I just had a picture that I printed instead of a sticker?
@DrewFerrigno3 жыл бұрын
Do you have a video for the vinyl part of this? I want use my own original art and fan art, so if I could find out how to make the stickers then that would be so amazing!
@dougs81963 жыл бұрын
If you want to do it by hand, you can buy Vinyl sheets, then you need a light box( or similar. I had a glass table I put a lamp under it), cut out the image with a xacto knife, use transfer tape (or masking tape to hold the image together), peel the sticky side and put on the disc. Here's a video someone else made... kzbin.info/www/bejne/goalYYWopt2SaKM Your other option to find someone or pay someone with a vinyl plotter (sign shop usually have that stuff, i've seen people in disc golf forums offer service as well) that can digital transfer and cut out images.
@davidcoiner65504 жыл бұрын
Could you tell me what those different discs are? Like what models/molds?
@CritBeatsRaw4 жыл бұрын
Hey Chris this is awesome, do you still dye disks for customers? i would love to have a dye look like yours
@chrisl99634 жыл бұрын
I don't. I would visit Reddit discdyeing. There are several people there better than myself that do it for a little $$
@inkassoandi20973 жыл бұрын
can someone help me with what material he used for the stickers? iam no english nativ didnt really get it 😅
@christofferfeiff19044 жыл бұрын
Has a logo of a cactus and a green disc.. Puts it on the yellow disc. TRIGGERED :D
@chrisl99634 жыл бұрын
Still have it!
@jeffheyer77836 жыл бұрын
Good video.. but why not just tell us where you buy/get these vinyl stickers at???????
@chrisl99636 жыл бұрын
Jeff Heyer I made them myself on the cricket
@nicklogsdon91824 жыл бұрын
Who/where do you go to get stencils professionally done? Really wanting to do that.
@chrisl99634 жыл бұрын
I'm sure any local shirt maker, vinyl seller, or Facebook mom can make one but I do all of mine with a Cricket vinyl cutter
@GampoEC9 ай бұрын
What size images work best?
@Bradley139834 жыл бұрын
What if I don't have vinyl? Can I just use paper?
@OneLovePsych2 жыл бұрын
It’s time to make a Starfield Disc my friend, that’s exactly what I’m doing 😎
@timtim99023 жыл бұрын
i cant get any of my discs to hold a dye... not sure what im doing wrong i left it set for about 8 hours and its like i never dyed it at all
@littlebirdblue3 жыл бұрын
It depends on the type of dye you use and the type of plastic your disc is! I had the same issue when I started. If you Google 'disc dyeing wiki' you'll find a super helpful page from reddit with basically everything you need to know about dyes and plastics!
@timtim99023 жыл бұрын
@@littlebirdblue thanks! much appreciated!!!!
@L33W41K416 жыл бұрын
How do you clean the original designs off the discs to begin with? Will acetone work for that too?
@chrisl99636 жыл бұрын
juniart yeah that was my comment about 1 min in. Acetone works better than anything else
@BigSho0ter5 жыл бұрын
if i use spike it fishing lure dye, can i just paint it straight on and let it sit or do i have to use shaving cream?
@briebraman83765 жыл бұрын
That dye is like water I have attempted to paint a disc with it before .....my best efforts with it where making drop designs with an eye dropper
@gabbydacheff64752 жыл бұрын
Ok I've done the Acetone and it ruined the vinyl stencil, did this happen at all to anyone
@edgelordofthedepths45626 жыл бұрын
yeah man really good video. one critique though, it would help your dude if you put a list of supplies in the description. should do more though dude...I think you just hit the tip of the ice burg. what would you say the best vinyl for this is though? I want to do something with great detail...kind of don't want to give the idea away. yet it's just so cool. I'm gonna do hail oderus...prob on a dd2, boss or katana. I was thinking like a purple die on top of the clear pink blizzard. most yall dude's prob aint into gwar any ways lol. p.s. I get power throwers turn em over but if you got that perfect form flick like your dude does...blizzard really launches. yeah meant more for old people and kids...but 140 or lower this thing even floats and not just across the field. that's the secret though the lower weight. if your having problem with distance...but got form down. id give it a try.
@edgelordofthedepths45626 жыл бұрын
really though I've seen vibram about the same weight too. so just lower weights in general. yet cant get a katana or boss in vibram. cool discs though.
@edgelordofthedepths45626 жыл бұрын
also you know its good to have variety for them noobs reading thinking they should fill out the bag. I'm rocking star, champion, blizzard...got drivers, multi purpose, putters. even had a fairway...du know what happened maybe lost or givin away. I always play from best of 2 any way, so id do a light one and a heavy one. sometimes you need something to cut through the wind, sometimes you want to be carried by it. shhhiiiiiiiii I use a rock for trick shots and putting...distance drivers too, but aren't we all putting from the T. lol
@kevinbechteljr56125 жыл бұрын
What kind of dye do you use
@KylerHodson4 жыл бұрын
How would I go about getting the sticker made? I would like to use my own logo that I have but I am not artistic in any way really so I don't really know how to go about it
@chrisl99634 жыл бұрын
You could probably reach out to a local vinyl or t shirt shop and they can make it for you for a small price
@victorrios32946 жыл бұрын
Were do you get your custom stickers?
@williambusler5 жыл бұрын
What type of disc is that green with black rim disc called
@nonphiqtion6 жыл бұрын
No name. Do you have an Instagram and do you sell your work or make custom discs?
@zzclarke6 жыл бұрын
Where do you get the stickers you used? If you made them, how do you make them?
@chrisl99636 жыл бұрын
Richard Clarke I made them on a Cricket. That's would be a whole other video to explain how to use a cricket. There are plenty out there to watch honestly.
@zzclarke6 жыл бұрын
Okay I will check it out. THANKS!
@DerFloH966 жыл бұрын
Is that some Kind of special powder paint? Do you maybe have an amazon link ?!
@chrisl99636 жыл бұрын
Florian Henneke iDye Poly
@zoohighview4 жыл бұрын
Where do you buy the stencil vinyl paper?
@smokeyone4 жыл бұрын
Where do you buy the powder?
@youngkristofer186 жыл бұрын
First subscriber!
@MenOfDust6 жыл бұрын
Dang dude, this was awesome! Do you sell any custom stamped discs, or take commissions?
@sk8erjamez914 жыл бұрын
How do you make your stencil sticker?
@nathanwaldrop26844 жыл бұрын
Where do u get the stencils
@Meadiocracy4 жыл бұрын
Where does one get sticker stencils?
@benjaminhoeft9082 жыл бұрын
This was awesome, thanks so much for the in depth tutorial! 2 questions, first is do you sell discs? Second, where do you get the vinyl sticker cutout?
@chrisl99632 жыл бұрын
I do not sell any. And I normally get the sheets from a vinyl shop and make my own on a cricket machine.
@LuckySage6 жыл бұрын
Where do you get the vinyls and the designs for the vinyls?
@chrisl99636 жыл бұрын
Steven Thompsen I just pull images off the internet and edit it through Crickets software.
@LuckySage6 жыл бұрын
Aha gotcha thanks for replying especial so quick
@Tarkonard3 ай бұрын
all i need to know now is how to get or make a sticker :O
@maksenDK6 жыл бұрын
The Zeppelin one looks awesome :)
@LakeBath6 жыл бұрын
What’s the dye? Iodide Poly?
@chrisl99636 жыл бұрын
IDye Poly. Search that on amazon
@Lukeconwaydg2 жыл бұрын
How the hell do i make my shaving cream paint stick
@kyled92034 жыл бұрын
Can you make me a pip boy disc?
@austinbynum31936 жыл бұрын
i have a question... i have a black pro disc already took the logo off. am i able to put just shaving cream on my black disc and the pigment white of the cream stay on the disc? thank you!
@chrisl99636 жыл бұрын
Austin Bynum negative ghost rider
@br1ckbazooka6 жыл бұрын
Dyed my fist disc last week, fiance was upset because my powder got on the bathroom sink.
@chrisl99636 жыл бұрын
Britt Markum so first I would try a bleach foaming spray, if that doesn't work try vinegar and baking soda, and the cure-all is to actually scrub it with 100% acetone and baking soda. That will dang near clean anything
@sashar.s34972 жыл бұрын
6:56
@SETXkemosabee6 жыл бұрын
I know your name..
@chrisl99636 жыл бұрын
britt Clark yup that happens
@orb2150tx3 жыл бұрын
Sorry...hope your DG game is better.
@chrisl99633 жыл бұрын
o....k?
@j45002 Жыл бұрын
Golf discs
@libertybong4206 жыл бұрын
Does this method work on star plastics? I used acetone on a star plastic to clean it and all it did was smear the sharpie
@chrisl99636 жыл бұрын
libertybong420 you have to be pretty generous with the acetone. And yeah I have some star plastic discs that dyed nicely