Dishwasher Repair - Replacing the Hose Coupler (GE Part # WD24X10066)

[@nancyivie3762]

Thank you so much. We were lost until we found this video and were able to take it apart and put it back together. We priced a new dishwasher and it was 900.00. We spent 59.00 for our part.

[@COddietsch]

This was perfect. Life saver and it's 2021 now so you will never probably get this but thanks so much anyways. Our hose started popping off the faucet, Sears wants $89 just to come out and tell us it's the hose and if I refuse, and after they quote me $200 for a hose I refuse they still charge me $89 for the advise. A hose is $100. Thank you.

[@Michelegermain]

This was a very well done tutorial. My husband and I followed it step by step and had it done in less than an hour. Thank you very much!!!

[@jilldavenport2526]

Thanks for the very clear and helpful video. My son and I completed the job in one hour and my old dishwasher is back in business!

[@chuckborden8532]

GREAT VIDEO!!! Also ...when you discard your old portable dishwasher, remove the hose coupler off of it. Save yourself 90.00. Another quick way to fix this issue much quicker...cut the hose coupler off and splice the old one in..A mouse bit through one of our hoses..I just spliced it in...Worked for years. I spliced it about 3 ft below coupler so it can't be seen.

[@jvrock7]

I'm so glad I found this video! I was afraid we were going to have to give up having a dishwasher because the coupler stopped staying on the faucet. Now I know we can fix it! Thank you so much!

[@nataliep4643]

Thanks so much. I got my parent's old GE Viscount dishwasher, which they got in the 80's sometime. I have been using it for about 8 years, but the collar on the coupler is cracked almost all the way through, so I ordered a replacement hose set. This video is exactly what I needed before starting to install the new part. Thanks again.

[@Final.Fate45]

This video was very helpful! My dishwasher had a few small differences, but it wasn't hard to figure out a way around them. Thank you for providing this.

[@Desron58]

This video made changing the hose coupler on my daughter-in-law's Maytag dishwasher a breeze! Thumbs up!

[@jtremblay100]

Thank you. The Two back screws were the hardest not quite as easy as you make it look. Appreciate the video. Just fixed mine today.

[@alantuttphotography]

Many thanks for such a clear and easy to follow video. Went very smoothly, and now our dishwasher doesn't leak at the faucet any more.

[@johnfrank6126]

So this video was entirely wrong for my GE portable dishwasher. I had to remove the top which was correct. But I had to do that first. The on the back of the unit there were 2 screws on the bottom that had to be removed and the two screws on the top under the Formica top had to come out last. Then You need to remove the sound reduction insulation to get at the hoses, The hose connection is basically the same except I had to trim the replacement hose down to fit snugly. All and all it was not that hard of job, I wish I had the foresight to video it. The GE dishwasher model I have is a Nautlius. I hope this help with you repair.

[@robertshuler7269]

On ours (GSC3500D35WW) there were two screws at the front under the top to remove first ... removed the top. Took out two screws at the top front holding the sides on and then the two at the bottom rear. Sides came off easily lifting it off two tabs at the front. We replaced the funnel fill and gasket and were surprised it was fixed so easily. No more leaks.

[@JavaLuv]

Thank you for this video! Just replaced the hoses on my GE dishwasher, and this video was really helpful.

[@bonnieforrester6827]

GREAT SAVE ME A BUNDLE OF MONEY THAT I DID NOT HAVE THANK YOU, REPAIR MAN,THUMBS UP FOR YOUR GUIDANCE ,I RAN IT RIGHT AWAY AND IT`S ALL SYSTEMS GO NO MORE KITCHEN FLOODS.

[@xxx-ng4hv]

no need to take the cabinet all apart, before you pull the old ones out, tie a string to them. Pull out old ones, tie string to new ones and pull out to where they attach. Presto, no cabinet removal.

[@greg640]

I hope that does work, will make it much quicker

[@maureenlittle1079]

genius.

[@lisap1776]

OR, we can order a unicoupler repair kit on Amazon for $18 instead of $75 from GE!!!!!......just sayin'.... ApplianPar 285170 Dishwasher Faucet Coupler Collar Kit for Whirlpool Kenmore WP285170 PS334438

[@keithkool92]

x xx must be an electrician, 😊👍

[@tlrmd4you]

I have the whole new set, including the case frame around it. Still possible?

[@MadameSomnambule]

I have a Kenmore dishwasher, but the setup is very similar. This should help tremendously

[@destinysherman7328]

Did you ever try it? I have a kenmore and wanting to change it out

[@KiraBKADestroyerOfWorlds]

​@@destinysherman7328 did you ever get it done?

[@MrLFDV]

thank you, worked great. Small problem on my side: was left with multiple screws. The "bucket" was different. I also had to break the part where the power cord is since it was welded inside. Worked! Sort of...

[@wendolynschlamp9570]

Can anyone tell me why this part was replaced? My dishwasher isn't drainning, so wondered if this part could be the problem ... Very helpful video to learn how to disassemble this model of dishwasher.

[@tty23]

Would it be possible to replace the dishwasher all together? .... I wonder if the portable cabinet will fit a standard under cabinet model

[@imanta1972]

Brilliant! Thank you soooo much! Saved me money and time!

[@christauscher8288]

ya hooo I'm fixed I have a whirlpool but it was the same way all most Thank you Thank you Took 2 hours lol 1/2 blind old lady and 1/2 blind kid

[@mjb12141963]

Can you tell me how difficult it would be to put a new undercounter dishwasher into a portable dishwasher cabinet?

[@partselect]

Unless the tubs are identical, it would not be worth the effort.

[@andaloo66]

Thanks so much! Perfect instructions, easy to follow and got the job done myself.

[@carolmullins]

a great video, unfortunately I need to take apart and replace the unicouple only..

[@octogirl2046]

By the way the tutorial was perfect. I was able to take it apart and put it back together again sans a few screws

[@BertScholl]

Thank you so much! Your video made the whole process super easy 🙏🏽

[@kendalprivett8491]

Do I need to replace this whole hose if it’s just a faulty pressure release button problem (red). It drains constantly.

[@BO-ce4jn]

I have the same issue. Did you ever find out if this is possible?

[@Zehlek]

When I connect the hose to the faucet and turn on the water, it will spray from the top and then pop off, do you think I need a new hose or is it an issue with the faucet? It used to stay in but now it won't. I even tried a new faucet adapter

[@tedloring2960]

I wish there was a video like this for the same dishwasher but for when it’s leaking from the bottom..

[@tianamalone]

Perfect instructions. Thank you!

[@markmueller2778]

Thanks for the video. One comment/question. Maybe I just missed it, but when I tilted the dishwasher on its side, some water came out. Not from the hose that I could tell, but I'm guessing from the inside. It wasn't a huge amount, but two or three cups worth probably. Wasn't sure if there was a tip for that. THanks again!

[@partselect]

Mark Mueller There will normally be some water left in the sump portion of the pump that you cannot see. Good point and I do believe that we neglected to mention it. Thanks for your tip.

[@stuart6724]

I want to install a longer drain hose so the dishwasher can drain into the drain in the basement, what grade of hose do I need?

[@jeaninehill4411]

Great video made it easy to replace it. Thank you so much!

[@octogirl2046]

My problem is that the unicoupler wont stay on the faucet. I tried changing the adapter and it still wont stay on. Because of covid i can’t go anywhere and no one can come to my house. I think I need a new coupler but it can’t be purchased separately. The new coupler is available with the hoses attached to it for 179.00. Is it worth repairing a 16 year old dishwasher? A new one, even if i can find one is 900 including taxes. I don’t know what to do...sigh.

[@adamdurham16]

Ya just replaced mine using this video. Works like a charm.

[@dt574]

what GE model is that I have the same one and I need to find an adapter to fit my sink

[@markjames1260]

At second 58 the caption says "fire harness" but it's a typo. Should be "wire harness".

[@matoshirenTFL]

What model is that one inside is looks exactly like that one?

[@nickwilliams3710]

Why are there concrete blocks fitted in the bottom of the dishwasher?

[@MHow-qc3ns]

Nick Williams: I would guess that the concrete blocks prevent the machine from tipping to the front when the dishwasher door is opened to load or unload dishes. Just a guess but I would write or call customer service at GE and ask your question. When you get your answer will you please post it here so all of us will know what the answer is. Thank you.

[@matoshirenTFL]

What model is that one because mine Looks exactly like That one

[@rfwehbe1]

Many thanks, very helpful video!

[@dannychowning257]

Appreciate you for this.

[@Steffies4]

Kenmore elite has star star skrews, and if frozen, dremel and or drill the skrew head off

[@partselect]

I suspect that you are talking about Torx screws. With the right size screwdriver, you can normally remove these without trouble.

[@pat2e962]

great video , very helpful thank you!

[@jdannett78]

DO NOT ATTEMPT AND ADD AN EXTENSION. EVEN WITH THE BRAIDED 5/8 DIAMETER INTERIOR HOSE FROM LOWES, I GOT BUSTS AND LEAKS BECAUSE OF THE PRESSURE THE UNIT EXERTS ON THE LINE. I ATTEMPTED BOTH AT 9 FOOT AND APPROXIMATELY 5. NOW I HAVE TO REORDER THIS PART.

[@libraryjuice5790]

steve, can you help me find a discontinued part for ge pdw7900. part number wd12x10057. i need the hub venturi only. i tried dozens of sites to no avail. youtube is my last resort. thanks.

[@damaszanoni401]

hola puede explicarme en español por favor? mi lavavajillas le pasa muy poquita agua y el 90% se regresa por el stopaqua

[@gmichaloski3367]

Thanks for the video

[@sambaniny1]

Where can I get the parts

[@frankie3591]

gpt225sglww is the new model I have. Well, it drains, but slowly and still left over water when cycle ends. Nothing inside seems stuck. I will drop on its side and try to open bottom hose connectors to see it something is stuck there. Damn thing is 3 months old. Will update you guys.

[@octogirl2046]

I only need a small washer like (white) ring? Anyone? So sorry. Perfect video.

[@deboman9893]

Thank you

[@VyseAcher]

Nice music.

[@wonderwond]

do I have to replace the entire hose just over the red push button pressure release not working properly. it drains water constant from the valve not working right

[@partselect]

Hi, could you please provide your model number and our team will be happy to look in to this for you.

[@wonderwond]

@@partselect almost same as in the video, GE portable dishwasher,, where it connects to the faucet, the red pressure release button needs rebuilt, how does it come a part

[@marilynjackson5752]

I think I'll need a technician 😢