Distillation of Frankincense essential oil - distiller 12 L plus with agitator

[@Desyo-wn7ib]

You made the process simple and easy to understand, thank you, What is missing is only the data on the weight of the Myrrh resin and the amount of oil that comes out, can I get This data please ?

[@inherbaofficial]

Good Morning! In a 12-liter you can work per single distillate as follows: 2/2.5 kg of resin and 7/8kg/liter of H2O (also depends to the quality and moisture content of the starting resin). Please note that this product you see in the video is used for laboratory purpose. We are selling this machine in the size of 65/125/250 liters. We also provide our clients with the recipe and timing with which to handle the different ingredients for optimal distillation and yield. If you are interested just write to us at [e-mail] Thank you!

[@eeeeeek]

that room must have smelled like heaven 💀💀

[@hiyat884]

Hello, very concise video, I have couple questions: 1. What is the water-granules ratio? 2. How to know if distillation is done?

[@yasserabdelghafar9193]

iam only user like you but from my experience as chemist 1 ° Place the water in the boiler. The water must not exceed a level established by a grate previously settled at the bottom. 2 ° Place the plants in the distiller avoiding the possible formation of preferential exit tubes for the vapor. -------------------- if extracted oil level is almost fixed amount means your exxtraction done

[@johnlarsen2156]

@@yasserabdelghafar9193 and that that means with not exceed a level established by a grate previously settled at the bottom.

[@algoquedecir00]

Is it better with frankincense to use hydrodistillation than steam distillation?

[@nurainiapril8533]

Where I can buy destilator like that. Thx. Imfrom Indonesia😊

[@inherbaofficial]

Hey! Just write to us to this email: [e-mail]

[@malindadavis5636]

AWESOME!

[@inherbaofficial]

Thank you so much 😍😍😍 Visit our page to know more about us: www.albrigiluigistore.com/it/erboristeria

[@Imbijohn]

Thanks for the great video, may I know what's the yield?

[@inherbaofficial]

Distilled essential oil yield ranges from 9 to 10 percent

[@cheynobi]

Is the designed shaped funnel better than the funnels with the Hydrosol Separator design?

[@victorjudicarlo9823]

Hello..whats the granular..is it benzoin or gum benzoin, since i have benzoin and gum benzoin, i 've tried and can not come out..would you help for explanation of granular? thank you

[@Daryeelnaftaada]

Where might I find that pressure cooker you are using and the remaining materials? Please and thank you 🙏

[@inherbaofficial]

Good Afternoon, just write to us your request and we will help you! [e-mail]

[@kasie680]

What do you do with what’s left in the pot? Is it of any use?

[@xyzxyz23513]

Sir what about co2 method. Can get water and oil in that method?

[@kavinah6342]

What do you use the residue for?

[@uthmanmoustafa2074]

Very good video. Can you please tell me what equipment you used in the video and where I can get them. Please and Thank you

[@inherbaofficial]

Good Afternoon, just write to us at [e-mail] and we will send you more information

[@manuvashistha2325]

Hello sir Can I know what was the quantity of frankincense granules you used in this video.

[@inherbaofficial]

Good Morning, approximately 1/5 of the total capacity!

[@concertahmad307]

What is the target temperature for oil separation of male frankincense?

[@concertahmad307]

@@inherbaofficial good

[@xyzxyz23513]

How much water boiling point at the initial

[@yasserabdelghafar9193]

1 ° Place the water in the boiler. The water must not exceed a level established by a grate previously settled at the bottom. 2 ° Place the plants in the distiller avoiding the possible formation of preferential exit tubes for the vapor.

[@user-op9pv5zl2y]

Hello Please wher can i get same matériel

[@inherbaofficial]

Good Morning: here you have the direct link to our store where you can find the products we are selling: www.albrigiluigistore.com/it/erboristeria Please do not hesitate to contact us if you are interested to buy one of our products. Here you can find our E-Mail to receive the required information: [e-mail] Thank you :)

[@mayankved8662]

What was oil percentage in that granules

[@inherbaofficial]

Good Afternoon, the yield is around 0.1 to 3 percent

[@Desyo-wn7ib]

You made the process simple and easy to understand, thank you, What is missing is only the data on the weight of the Myrrh resin and the amount of oil that comes out, can I get This data please ?

[@jhag2306]

Hi Albrigi.I would like to contact you via email. It would be nice to send over some Boswellia frereana frankincense.

[@inherbaofficial]

Good Morning: here you can find our E-Mail [e-mail] Thank you :)