DIY plasma cutter panthograph used for copying drawings from paper to sheet metal. Cheap to build (under $10). Sorry for the "plasma grinder" (3:25) and "plasma welder" (5:45)... :-)
Пікірлер: 37
@craftychrystal79139 ай бұрын
First place I found that shows how to set it to make the same size replicated drawing. Thank you so much for showing me this.
@Wood-In-My-Eye2 жыл бұрын
This is one of the best designs I have come across on here. It’s extremely simple thus easy to replicate! Great job. The only thing I will try to change will be the trigger assembly. My torch turns off slit on its own. I got my torch from Harbor Freight about 2 years ago. It’s strong as the rest it will cut 1/4 inch anything. That’s 6.23 mm. For about 500$ brand new. Thank you again for your plans!
@kennyd41935 жыл бұрын
Well done! Simple, effective and cost efficient. Many thanks sir!
@williammessenger96375 жыл бұрын
I think this simply elegant idea can can be modified to accommodate a router, a dremel engraver, etc. Thanks
@wacowski6373 Жыл бұрын
Nice Project! I want to build something like this with a engravour pen to mill inlays for my tool station.
@CogitoBcn3 жыл бұрын
Thanks, that's a clever idea. In order to get better shapes (straighter lines and smoother curves) you can combine it with wooden templates.
@Wood-In-My-Eye2 жыл бұрын
Absolutely! If you have access to a bench electronic scroll saw cut pattern out of Luan 1/4 thin wood first. You can even use a tiny metal pin pointer to cut very mini lines. On the metal. Don’t get frustrated if your prototype doesn’t work. They never do first shot. V.02 is usually where the perfected prototype begins to excel. Have fun you can build anything you put your mind to!! ( Op this is more directed towards people just figuring it out. )
@iainhetherington4608 Жыл бұрын
Great idea mate I’m going to try it as well
@MrClockbob5 жыл бұрын
Very nice job. Quite simple but it looks to work like a charm. I have been looking for a 1 to 1 scale pantograph and finally found your design. After building I'll use it to copy wood trim used on antique clocks and a Dremel tool with a carbide cutter where you have your plasma cutter.
@diecksl5 жыл бұрын
Thanks. Good to know there are people out there actually building and using it ;-)
@петяПетров-ю9ю2 жыл бұрын
@@diecksl можете размеры скинуть буду рад
@stuartgeller79376 жыл бұрын
Yes!! Just what I have been looking for for my everlast plasma cutter!
@MultiGazman6 жыл бұрын
Simple, cheap and no electronics.....Great solution!
@liammiller47587 жыл бұрын
I gotta make something like this for my powerplasma cutter. Thanks for the parts list.
@lewisdrake57655 жыл бұрын
I want to make one for my Everlast plasma cutter too. For me, almost as good as a CNC.
@spbygga81237 жыл бұрын
Thanks for including the parts list. Looks really good. Just got a plasma cutter and would like to make this.
@diecksl7 жыл бұрын
+SP Bygga I've been told a few times by other persons! At the moment I create a foot-pedal spot welder, I will include a parts list also.
@fredsmith61607 жыл бұрын
I've got a everlast plasma cutter that I would love to make this for.
@workshoponwheels49367 жыл бұрын
A tip: make a wooden template or such to trace around, will give a better straight edge. Kind of like Matthias wandel his pentagraph
@diecksl7 жыл бұрын
I know Matthias' video. Thats a good idea, but of course you have to make that wooden template first which is also a bit of work.
@workshoponwheels49367 жыл бұрын
Lejf Diecks But the higher accuracy can also minimise the ammount of post cutting work. And i think if it is something that should be repeated, it would be profitable to make the woorden template. For a one off I am not sure
@MultiGazman6 жыл бұрын
Hahahaha, That was exactly what i was going to comment, Love Matthias`s work to but the templates how to i got from Rednic kzbin.info/www/bejne/jJqQpWijopyWd9k
@mikemcgln50495 жыл бұрын
im watching because it was on a recommended list
@overbuiltautomotive12995 жыл бұрын
thanks for video be blessed Jesus gave you gift sir neat thing n just what i need
@dragonerregimentnr.57886 жыл бұрын
Die Idee Ansicht ist gut .ich würde die Schablone aus 5mm Sperrholz machen und und mit einer oberfrässe ein nuten, die Gelenke lagern um das Spiel zu verhindern , die kleinen Füße mit einer stahlkugel lagern fürs bessere gleiten. Lieben Gruß
@diecksl6 жыл бұрын
Dragoner Regiment Nr. 5 Was man halt so rumliegen hat ;)
@g.finley97795 жыл бұрын
Under $10 is worth trying this with my everlast plasma cutter.
@islamn7996 жыл бұрын
Very good experience thanks.
@Dutch_Prepper6 жыл бұрын
Just a tip : move the copying side (in this case the pen) , not the tracing needle side.
@AlphaTroniks6 жыл бұрын
wow ..nice idea!
@jaysen22003 жыл бұрын
Let me show you it's features !
@MiguelGarcia-cg6nv7 жыл бұрын
alguien que sepa de un pantografista para grabado de medallas en df
@dragonerregimentnr.57886 жыл бұрын
👍
@fagnernatalicio7 жыл бұрын
os circulos ficam oval.
@diecksl7 жыл бұрын
Hello Fagner paula silva, sorry I don't speak portuguese (translated your sentence with google translator). Did you build one yourself? If circles become ovals then something with the measurements of the pantograph is not right. Try to be exact with the length of the parts and the position of the holes. All holes should have exactly the same distance to the edge of the square tube. If you're unsure, try to build it from cheap wood sticks first. I hope this helps?