DIY 12v CAMPLIGHTS! Motion & Remote controlled! | DIY 12v in Your 4x4

[@bigoz1734]

79 owners are gonna run back to their auto electricians and ask for this whole setup 😅 You've truly made a game changer.

[@kabluwi]

79 owners are gonna go ask 4wd 24/7 why they haven't got this

[@AussieArvos]

Thanks Oz! Means alot you saying that 😂🤙

[@4.2patroladventures]

Yes they will and most likely over pay for it all just like they bought the car haha

[@Garbo4973]

Once they get them back from having cup holders installed.

[@peterbarber7613]

Big Oz. 79 owner are not going to run back to there auto electricians at all.It's not a game changer at all

[@liamhowitt902]

39 seconds in and i can already see the production quality is on the rise

[@AussieArvos]

Thanks mate, spent a while on it! Means alot you noticing!

[@liamhowitt902]

@@AussieArvos love your work boiz I'd rather watch you guys then 4wd 24/7!

[@rikwilliams388]

Just a heads up for anyone else looking for an 80 series cargo barrier, the 100 series fits in perfectly, they are easier to find and much cheaper. Love your work guys, the channel has come a long way and I always look forward to your new vids every week 👍👍

[@jacksonchannon3470]

As a sparky myself, far out this makes me so happy!! I love nerdy 12v set ups! Great work mate! For the inside of your switchboard, get a bit of spiral wrap bro, make it look so much neater :)

[@AussieArvos]

Thanks Jackson! I will!

[@nuggetjr3385]

These videos are without a doubt better than 4WD action

[@hawky_y]

4wd 24/7 could learn a thing or two from you guys hahaha. The raspberry pi idea is flat out genius. Definitely going to add that to my rig

[@peterbarber7613]

Hawky_y. You have to be joking don't you.More like the other way round

[@Connor-wo1gj]

The computer in the back reminds me of some Pimp My Ride type shit 🤔

[@dougjohnson9413]

Great work mate. Awesome videos. Tip dont mount your fire extinguisher near the most likely source of a fire. Your switch panel. Cheers

[@sizercam]

Yeap, thought the same. Mounted in front of drivers seat would be a better option,

[@frednurks8528]

Mate, just the smile on your face in accomplishing this project was awesome. Your comment of “just have a go” should inspire many people who are scared to make mistakes in learning something new. Researching and resourcefulness is another strength you have displayed in this episode. Your following is growing!

[@AussieArvos]

Thanks Fred! Yeah I was worried I wouldn't be able to make a proper, good looking box, but I thought why not give it a crack and try learn afew things too!

[@johnhirt2821]

Dude, that is seriously the most useful and inspiring 12v video I've ever seen. Really impressive work and great ideas and execution. Congratulations on not only coming up with an awesome set up, but also sourcing all the gear cheaply and installing it yourself. You rock!

[@AussieArvos]

Thanks John! Really appreciate you saying that!! Means alot!

[@marxtuf]

Fantastic effort. Next idea that came to me was to hook up the four way hazard lights to your amber side lights for those roadside emergencies. Love your effort and enthusiasm. So relatable to those of us who have ditched the millionaire budget channel.

[@ricki11cook]

Love it. I have some similar concepts in my 76. I use SPDT relays to shift loads between batteries, change modes, etc. 2x Raspberry Pi's, one for the Victron apps, the other as a general computer. Motion sensors trigger the roof rack & rock lights. Its honestly too much fun as a nerd.. Its endless when you get this creative. Well done mate, your content is great to watch.

[@pschofie]

Well done, my son and I watch you guys every week, it s great to see practical and affordable (no cash for comments) projects. This is what we did in the 80's we made all own stuff, even made our own winch form old motorbike gear boxes. Keep going guys!!!, one small comment, please reduce the size of the circuit breaker and put it near the battery, (I am communications engineer) 100 Amp is way too big and you have left your wiring exposed to fire from your distribution box to the battery. work out you maximum load, add 10% and that should be the breaker size.

[@alexcross7739]

Really good content. Thanks boys. You’ve gone from filling holes in the road to really providing some useful home made installations. Well done.

[@AussieArvos]

Thanks Alex 😂 means alot mate!

[@anyamingan2287]

The remote control lights are the best thing since sliced bread🙌🏽

[@obsgr1]

New t-shirt idea. Cargo-barra. Like a parrot, that holds your 4wd 12v setup.

[@Oz4me_craig]

Aussie Arvos all 'Original' ideas for a 12 Volt setup, that works so well👍I'm a tech by trade and the fact you designed tested and built, all your own circuits with Multi Sim.. kudos Pat, can't wait to see the size of your smile using that motion sensor and wireless remote, on a trip! Legendary stuff guys and only on this channel🤫

[@mickburns5546]

That would be one of the best “how to” with clever ideas that I’ve seen. I love to see all the gadgets that we can get these days. To think I used to rely on torches and eskies in the day.

[@AussieArvos]

Thanks Mick!

[@haydenkenwrick3209]

I can see motion sensor and remote relay module sales going absolutely through the roof now! Love ya work boys👌🏻

[@AussieArvos]

Thanks Hayden! HAHAHA next "Gamechanger" for sure!

[@jamesgroch3402]

A cool little mod. Connect your remote dongle to your compressor so you can turn it on and off while you're airing up each wheel.

[@Instinct_media]

My Arb single pump does that out of the box, soon as you disconnect the valve it shuts off

[@Sp33dYAU]

Love the high levels of passion here -- mad stuff! I put a motion sensor in our pantry and garage -- also the best house mods ever!

[@kabaottoemulsion1869]

You are genius! You have no idea how difficult 😣 it is to use circuit program ! Very nice set up! Very very jealous! ARB might need your service!?!?

[@AussieArvos]

Thanks Kabaotto!

[@dirtydogg06]

Hell yeah I’m doing this. That’s friggin mean bro. Just goes to show you don’t need the fancy redarc stuff! Legend my man.

[@TheTorkerman]

One of the best 12v set up videos on KZbin, you watch… built not bought, 4WD 24/7, Patriot campers etc will all have this in their set ups before long.. Nice one Patrick.

[@addamkahsai2237]

Wow just put a motion sensor in my canopy i cant believe i didnt think of it. I paid $9.99 off ebay but it's truly priceless haha love it cheers boys.

[@messiahmoin8257]

Drinking game: have a shot every time Patrick says ‘essentially’ You some smart brothers keep it up 👍🏿

[@scottyyy3608]

And I thought my wiring was finished.....ebay here I come for a motion detector.....bloody marvellous work guys

[@OutbackTrekkingGeorgeLeov]

I love it patty! I love how you said "you've gotta give it a crack, it's what makes it worth it". Thats exactly what I'm doing right now, I've started my own KZbin channel and I'm learning with every video I'm making!

[@AussieArvos]

love it mate! keep it up!

[@nicholasb1231]

Circuit Breaker needs to be closer to the battery, at the moment it's only really protecting an overload from the fuse panel. It's not protecting the battery from a short. Should be as close to the positive terminal of the battery as possible. Great video though

[@-Awareness]

Ive seen so many rigs damaged from fires and the owners scratching their because “they had a circuit beaker installed though” lol…

[@4x4CampingandAdventures]

I always went with the circuit breaker mounted onto the battery as a rule of thumb

[@dougjohnson9413]

Just have one at each end.

[@nicholasb1231]

@@dougjohnson9413 Absolutely unnecessary and doesn't achieve anything. Only would be useful on a dual battery system using a VSR. This is just his feed to the fuse block, only needs one at the battery.

[@AussieArvos]

Yeah definitely agree Nick, I'll fix this up!

[@davidschumann4495]

Ok this gave me an idea. I just ordered the sensor and going to hook it up to the light up switches., on the tabs that you'd connect to the dash lights.

[@DENMONKEY]

Good job mate. Those little remote relays are great for so cheap. You can save wiring if you just run the power feed to the roof and put it in a water proof box. Then run to the lights from there. Saves running 4 lots of wire up to the roof. And pro tip. Don't have your fire extinguisher at the source of the potential fire. Have it a bit away. That way of there is a fire you will be able to get to it. Because if there is one right above it, you may not be and to get to it because of the fire and heat 😉 then it's useless

[@WS_00]

I love the XX intro song at the sensor light section....nice touch....or non-touch actually.....

[@blhob1]

Bloody well done! Some good ideas, and really well done. Definitely not a chippy, but love that you are having a crack! You aren't just throwing the car at a redarc dealer/fitter to get all the tip end stuff. You've got a lot of functionality, and space on that box for any additional power monitoring bits etc.. Ripper work blokes!

[@aravindaweragoda923]

I’m redoing my rear setup at the moment and this is the best idea I found so far. Cheers mate

[@sky73x]

Some glue and paint make me the carpenter I ain't! Definitely got some 12v ideas from this vee-jay-oh. Top marks fella!

[@munecito]

This video was a great inspiration Patrick. Next week I will have my set up ready. I am using a lot of your ideas and some of my own. I'll message you with my set up when I finish it. Next week mate! Just waiting on some components.

[@abdurahmanburcaawi6637]

Dude, love your work. I like your explanation, simplicity & the clarity of your work. You really inspired me. I am a big fan of your channel. Keep up the good work.

[@MyHawks23]

Respect for being different and innovative.. Love it..!!!

[@ragonfand4752]

100 amp Circuit Breaker that maybe abit to much for the wire your using, the whole point is the circuit to pop before the wire does

[@Sethjxl]

The breaker looks sufficient for the wiring. Remember, that 100a breaker is only to protect the (looks like 6awg) cable going from the battery to the fuse block. The wires connected to the fuse block are individually protected by the respective fuses. With that said, those cheap resettable breakers almost always pop at %80 or less than their rated current. I've even had one catch fire. Just use fuses and carry spares.

[@martinravina6934]

Good on you mate! Loved your contagious enthusiasm when you got it working as envisioned! My 5 cents, I've got a cheap but fairly decent android unit that has USB and SD card for transfer and of course offline Spotify is a goodie specially here in NZ where FM radio is patchy at best in the mountains.

[@mmorgz6622]

yea got one in my bus too. has 2xusb and micro sd, plus internal storage, wifi, google play store, fm, media player, video player, rev camera, gps ect. bloody awesome stereo substitutes for sure.

[@RustyCandyAdventures]

Put a Anderson plug on input to your cabinet. On your 100amp reset fuse put a slow blow 100amp. Your wiring put on cable clamps to stop vibration on cables. For you fidge check out lock your hubs on voltage regulator. Keeping voltage steady.

[@Beng177]

The raspberry pi reminds me of the GPS tracker I made with an arduino, had gps info, time and altitude logged to an sd card and you could see the exact places you went at what times at whatever speed. it was pretty neat for me at least. Your raspberry pi could easily do that! after a few trips you could make a map of lines where you've been around australia

[@RustyCandyAdventures]

Idea. If your using on canopy, or just want security. Add some doides with a keyway switch to turn on a pir, vibration and siren alarm circuit. You could put in a diode to hazard switch. They all come with time out relays. This for your roof rack lights.

[@toddjones3619]

Absolutely wicked with your own little PC onboard, while hitting the tracks

[@mmorgz6622]

I have 360 degree lights on my bus for camping and 4wding which id consider a must have, but I put the switches in the front on roof on a blank panel so I could quickly hit them on the go. They are brilliant for night time trips out bush or if im towing a trailer, I can flick the back one on to check on my cargo. The motion one is a pretty neat idea though. Might have to look at that myself :). I also opted an android stereo which does all the file transfer, wifi, internet, google store for games n apps, music, movies, reverse camera, gps ect. Its basically a tablet/laptop thats built into the dash. They are awesome to have on a 4by.

[@raymondhayne1250]

Love the motion sensor idea mate 🤙🏼 definitely putting this in the back of the patrol

[@brettricho1]

Keen to see what you choose for a led headlight upgrade 😊

[@paulclarke4431]

Nothing better than some nerdy 12 volt! Now make it half height and have the monitor rise up mechanically out of the box (from a motion detector trigger of course)

[@mickburns5546]

Looks like being a Nerd has cool benefits. Love it 😊

[@AussieArvos]

Thanks Mick!

[@jeepnutscotty]

🤣 your into tune is the same song used in the Snow Runner 4x4 game… planned Patrick? Lol 👍

[@erikmason3470]

Great work Patty this is 100% a game changer I never though about wireless switches or that awesome motion sensor. I will 100% be using this in my new build the convenience is bloody next level! Cheers mate keep up the good work 👍

[@MrSmerb]

Thats bloody awesome man, game changer for sure will now see motion sensors everywhere, keep up the good work

[@bullzye101]

bloody awesome stuff thanks for all that info about all the stuff you used .. big thumbs up

[@lukeyeglin3579]

That motion detector is just mint! Well done mate 👍🏼

[@petersomani1580]

Hi was the best video about 12volt setting, now to hook the remote to operate my side lights . Thanks.

[@mattbarnes3111]

had the motion sensor on my jeep for a few yrs now..though will get the wireless setup 👌

[@schoey4x4]

The computer idea is awesome. You did a fantastic job with the 12v system

[@AussieArvos]

Thanks schoey! Really appreciate it mate!

[@grahameroberts8109]

To use your own words; “Bloody amazing!” 👍🏻🙏🏽😷🦘

[@Daniel-Mclovin]

79 owners can let go of their coffee machines now🤣 awesome set up mate! Very impressive

[@leonkane8240]

I enjoyed seeing your enthusiasm & how pleased with what you put together you were. I make stuff & I know that feeling, even if it edges are a bit rough, you built it & you made it it do the job., you ain't building it to please & pander to modern woman. The bonus is that each time you build something your knowledge & skill gets better & broader, even when you build a dud, you learn something, for next time @ you have the confidence to fix & reduced or eliminate its dud-ness. Some of the next ones will turn out even more of a surprise & satisfaction awesome video, well done!

[@richnegs5828]

How cool is all of that!! Well done Pat!! Bloody impressive.👍

[@AussieArvos]

Thanks Rich! Really appreciate it! :)

[@nathantunks1605]

Some great ideas there. Well done!

[@AussieArvos]

Thanks Nathan!

[@lifebeginsinlowrange4x4clu11]

This is a sick idea man I’m going to try that motion sensor out with my 80 12v These videos are awesome yous are a good bunch of lads 👌🏼🇦🇺

[@AussieArvos]

thanks mate!!

[@Dan-wy9kw]

These videos keep getting better and better boys

[@KrAUSerMike]

There's some good ideas! I've saved this for when I get my own fourby and need ideas!

[@4.2patroladventures]

Absolutely cracking video mate .. super impressed with ya simple but effective setup 👌 well done

[@munecito]

Who can honestly be such an arse to give this video s thumbs down? 2 people so far. Great job. I like what you have done here. Some ideas will be applied in my own ute. By the way those don't look like double poke double throw as they only have one on position.

[@kabluwi]

Those amber/white lights are mad, ordering a set for sure.

[@AussieArvos]

Yeah they work awesome!

[@wayne1959]

good sh*t mate..that's a ripper setup. I can see the rush to ebay to get the gear for many a system install inspired by this. Well done. have you considered splitting the door in two so you can have stuff against it to halfway up without having to move it to open your box door?

[@mickg9563]

That wiring is a hell of a mess but damn I love that set up. The motion detection would be brilliant for those camping solo that are worried about safety. Set it on top of the vehicle to capture anyone coming near it of a night. Being I prepare food and such at the back of my Pajero it would work a treat there too. Also really like the idea of the Raspberry Pi for backing up data as thats something Ive been trying to work out for a upcoming trip. This time around though I will be using my Laptop.

[@juststuffwithwolfe4482]

I also see that u put XR sets

[@MrDreadedman]

Thank you for this it has given me alot of inspiration for my lockdown 12v system

[@edgecumbe3120]

I'm a nerd at heart too love the setup mate. Inspired me to get off my ass and setup the ute tub cheers

[@johnigglesden5306]

Such original ideas, seriously impressed mate!

[@pauladams4890]

I’ve gotten the Bluetooth one of those relays... I think it’s better because it all operates from my iPhone. I’ve got 2 banks of lights & water pump & travel buddy oven On it....that box is twice the size it needs to be. But very cool, good work

[@ashfrye8312]

It’s great to see your 4wd’s coming along 🤘

[@AussieArvos]

Thanks ash! It's getting there!

[@keilfestin4606]

Definitely game changer dont need crazy stupid money for a system

[@andrewwilliams5337]

Got my hoodie. Love it! Great quality. 👍🏻👌🏻 Nice work boiiis.

[@chrisriley8184]

This is really cool man, I am wanting to build something similar for my 105, Hadn't considered the motion sensing but its now on the list, I want to do all of the switching using a touchscreen on my Pi as well as using it for solar and power monitoring all in one unit, Now all I have to do is learn how lol

[@allanpower8041]

Another good one boys.

[@joelanstey3821]

I want all the links 😂😂 I need it all!! Amazing set up man killing it!! Keep up the awesome videos

[@HammerRocks]

Nice one. Great job on your 12v and lighting. On my LC80, I have a 400x40x09mm LED light bar mounted on the inside of the tailgate with a built-in motion sensor. And I find it fantastic for the same sorts of reasons you showed. The only thing I wish is for it to have had an amber light feature. But I couldn't find one with both white and amber in one.

[@tomjaques07]

that’s so cool, never seen anything like that, well done.

[@JR-ij4mu]

great set up mate thought of putting the fire extinguisher under your seat if the fuse board caught fire you wouldn't be able to get it ?

[@AussieArvos]

Yeah I think after watching back the video, I thought the same, think I'm going to move it, because yeah if it lights up, well going to be hard to access it when I need it ahah!

[@brettandamber]

Sweet vid there mate. Love the beer sensor light 👌

[@d3athscyth]

Maybe move that fire extinguisher to the front…if you don’t notice straight away and the bottom of the box is alight, ur burning ur hands and arms to get the extinguisher. Awesome setup though, motion detection is the bomb….now hook it up to a google nest mini for voice commands

[@thedaveoraveo]

Great stuff love it as usual! Just noticed battery volts dropped a bunch when turning on various lights and stuff. Either your battery is cooked or you need to run two separate wires directly from the battery. If you've run small gauge wire that supplies the rest of the panel it will affect the voltmeter reading. Another option is to run an oversized wire from battery to supply the box. Cheers

[@AussieArvos]

I think you are right, I think it's affecting the voltage gauge!! Good spot! Thanks mate I'll have to fix that up!

[@thedaveoraveo]

No dramas, I had this issue myself. Volt drop on 12V systems can happen on surprisingly short length wires in certain conditions.

[@thedaveoraveo]

Also, you probably know this already but just incase don't forgrt to fuse wires for voltmeter and 12v box as close as possible to battery pos 👍

[@intersepter100]

Talented fellow 👍

[@coupaspicer7021]

That’s so good the 80 is a machine 👌

[@sizercam]

Motion sensors each side for just the amber lights, think about it when getting in your swag, or out when going for that 4am whiz!

[@problem_child1564]

Any thought about the fact you added a computer right next to your window, haha don’t park in Logan mate, love the vid.

[@ABL973]

You've inspired me to build this same setup. Thanks!

[@campingmates]

Ha ha ha !! Pretty good man !! Literally got the wireless bit from ebay- also get a another controller box just in case, mine got busted just after a single use. So ended up getting 2. Btw those little relays are rated 10ah each so you can definitely run without another relay circuit I reckon

[@wayneshafton]

Awesome work! I'll definitely be stealing some of these ideas. Keep up the good work 👍

[@AussieArvos]

Thanks Wayne!! Means alot! Thanks mate!!

[@boxheadmr]

Looks great, well done. Would be good to add some strain relief on those wires with all the bumps off and on road.

[@AussieArvos]

Yeah definitely a good idea, will be interesting to see how it performs with the corrugated roads

[@1993Revhead]

I hope you decide to raptor coat the 80. Would be a good episode

[@PaddyBoy644]

Great work mate, might pay to put a battery isolator in as well in case of emergency. Cheers Pat

[@AussieArvos]

will be doing!

[@skindog4206]

Top quality mate

[@neilodonnell4072]

Nice work guys

[@hamishman2196]

for 11 bucks that motion sensor is a great buy and will save alot of energy

[@AussieArvos]

For the price it's freakin awesome. Love what you can do with it!