DIY 2.5 TO 3.5 HDD SATA TO USB CONVERTOR

[@vmcdiytech3681]

Guys if you dislike this video , kindly tell reason in comments

[@aliakbarsafdari4084]

Great video, but the music is kinda out of place..

[@RvaninaVpered]

Great vid, great music, great job!

[@kenj_3436]

thankyou for this video i like it

[@OwlCapone8630]

Kill music

[@andreyosss4352]

Thanks for your video! But I want to ask: does it need to unite ground wire from USB and ground wire from power supply for stable and secure work? Or maybe this connection is already done on the PCB?

[@j.lietka9406]

Great DIY! I didn't realize the 3.0 had extra wires! Thanks 🤓

[@ZmiXMusicMixes]

Good video bro! Nice work, but then the music is on a whole different level!

[@SiyandaLamani]

Thanks about everything,you have been helpful a lot

[@tioksangpemanah1938]

thanks man, its work perfectly...

[@devlrn906]

Really liked it. Keep going...😀

[@Tikolico]

Awesome, Now I'm going to make my self a cheap JBOD BOX using an old power supply I got and some fans, a USB 3.0 HUB and some cheap SATA to USB cables from Wish LOL.

[@dumandede]

thank you my friend very nice work

[@assad758]

Thank you itas work im not waste money to much to make this things

[@MisterEMixez]

Excellent video! Thanks!

[@meherdillip]

Nice informative video, please make a video on m.2/NVME to usb conerter

[@vmcdiytech3681]

ok ,i try my best

[@nelsonvargas1638]

Excelente tutorial. Muchas Gracias Master

[@rubenmeza2690]

Hi, I was wondering what can I use to power the HDD beside the adapter in the video you had, if any, because I wanted to diy my own sata to micro USB and I saw you needed to power it with another device or cable because the micro USB wasn't enough, thanls

[@vmcdiytech3681]

Hi! how can you convert data from sata to micro usb ,did you have any microcontroller to do this function??? You are asking about power supply which type of hdd you have did you have desktop hdd which i shown in video its run with 12v ,so you need to power it with external power source of 12v with more than 2 amp,else if you have laptop hdd which runs at 5v dc ,you can power with 5v power supply around 2amp ,if you are doing desktop hdd to usb it will be more complicated to do this function, [e-mail] if you want any idea mail me

[@trevorgray3681]

any 3 cell lipo should work. it'll give you 11.1V. you could use 3 18650 batteries in series and they should have plenty of amps to run the hdd

[@nasarenioantunes8320]

Você é capas de transformar um Cabo Molex sp1,sp2,sp3 e sp4, em com saída USB ou Sata?

[@vmcdiytech3681]

please share images to my email [e-mail], i confirm you after...

[@josepauljenson8789]

03:32 Then why did you unsoldered everything? After that you just soldered all wires back in the same position. Why did you unsoldered the wires then?

[@vmcdiytech3681]

because that pcb is very delicate and pcb traces are very thin ,if anything goes wrong the traces will cut out from pcb with wire foldings ,so i unsoldered all and re soldered same again and added 12v external power source

[@Kuchuflaz]

@@vmcdiytech3681 I think this step is unnecessary, and you can solder 12Vdc directly without de-solder anything.

[@vmcdiytech3681]

@@Kuchuflaz yes , no problem,if you can...you can add 12v directly, without removing any thing, for video i need to show clear and clean so i did, all people are not expert's to understand at first time , some people are beginners , they don't understand if i go in express mode , so need to show full process 🙂😁, thanks for supporting me 👍🙌

[@samodrabudi3958]

Is it work on enclosure 2.5 USB 3.0 ?

[@AMANYADAV-qw4em]

Does this work in opposite ways..... Means.... From male slim sata to female usb 3.0... As I want a USB 3.0 in my laptop.

[@vmcdiytech3681]

please share full details of your idea though email (IMAGES OF YOUR COMPONENTS) and how you need to connect. [e-mail]

[@SinalNatural]

Eu suspeitei que havia um jeito, só não tentei. Só agora que comprei um, ví que havia como soltar 12v no antigo.

[@E3NewsNani]

You're great

[@omranalmasri5042]

Nice You are great at work

[@jotirlingswami9357]

I have segate expansin and seagate backup plus external hdd I have question that can i use 12 volt 1 amp for powering the hdd ? Please replay me its urgent for me Thanks

[@vmcdiytech3681]

sorry i don't know which type of HDD you have, generally external HDD communicate with usb power ,no need to use external power source ,if you have bigger one try your own risk, "we are not responsible for any damage "

[@fider7]

Good Music!

[@vmcdiytech3681]

Thank you my friend

[@cyborgzone7143]

good job bro

[@rizvanrizzy9534]

Sir SATA cable may say USB female kesy bany gi yea btaye.

[@vmcdiytech3681]

hello rizvan rizzy , we can't convert sata pin to usb , we can replace usb male pin with usb female port , we required that converted board (pcb ) to transfer data from usb to sata , so its not possible to change sata pin with usb port, if you required any more help contact in mail and share details like images and videos, but you need do at your own risk , we are not responsible for any damage, if need help contact to this mail [e-mail] , have good day

[@LegendOfKarogane]

Good stuff making one rn

[@JaskaranSINGH-rc1qd]

Is there any way to connect 3.5" harddrive using data only connection. I want power harddrives with my PSU. I try to find usb to sata (Data only) cable but couldn't find anything. Do you have any suggestions.

[@Rabah_issaad]

I did exacty that but i have a problem wish you can help me with, the hdd is spining but there's no data when i connect it directly to the computer it works

[@vmcdiytech3681]

yes, some model of hdd is not supporting with usb, but works with direct desktop, you need to check with different converters to get a right thing or use external hard drive to usb box so you can use it as portable harddrive

[@Rabah_issaad]

@@vmcdiytech3681 turns out that my hub doesn't work at all it can't read data not in 2.5 and not in 3.5inch I want to fix it but I don't know how to connect the wires directly to the adapter jack

[@vmcdiytech3681]

@@Rabah_issaad share images to my email and update me... [e-mail] ,if i know i help you

[@Rabah_issaad]

@@vmcdiytech3681 thank you so much brother I will contact, I appreciate it 🙏 😊

[@aromalaj7340]

CAN I USE A SATA DATA EXTENSION WIRE FROM MY OLD PC & POWER (5V FROM MOBILE CHARGER 12 FROM SPEAKER CONNECTOR CONNECTED TO CONVERTOR IDE TO SATA ) TO THIS CONNECTOR????

[@vmcdiytech3681]

No that's not usefull

[@shavaankhan1620]

The black wire to the 10, 11, or 12 pin. Can the black wire also be connected to back wrie on the usb connector instead of these 3 pins?.

[@vmcdiytech3681]

yes you connect gnd from usb to gnd from 12v ,no problem

[@nasarenioantunes8320]

COMO CONFECCINAR UM CABO 4 SATA COM SAIDA USB- PODE FAZER UM, PARA SER USADO EM UM TELMATEK. OBRIGADO ABRAÇOS.

[@akhileshtv193]

In 15 pin have 2 ground points wich is the currect one for fixing 12v ground

[@vmcdiytech3681]

no problem, internally all grounds are joined together, when connecting 12v you must connect 12v to correct pins and ground can connect to any ground point

[@jesusmarcial4572]

Es el cable el que le da la velocidad de tranferencia de un 3.0?

[@j.lietka9406]

Do you have a video of making a USB-C to HDMI cable? 🤔 It may need a controller. Thanks again 🤓

[@vmcdiytech3681]

sorry i didn't know that ,if you tell your requirement i post as soon as possible

[@j.lietka9406]

@@vmcdiytech3681 just a USB-C to HDMI cable. Thanks 🤓

[@anisalial-maghrabi3215]

PS5 Digital for Blu-ray Games and DVDs Movies in USB 3.0 Disc drive + Power 12V DC Work? Right? 🤔 Ok thanks for learning video 😊

[@genesisdiazm]

I would like to see the colors or tell me which ones are on the five color side, thanks!

[@vmcdiytech3681]

The colours may different from product to product ,so Google it your model and find your exact piece and find wiring order

[@tectudoentretenimento5067]

hey man , i just tried that my adapter is a little different from yours .. it does not have these connectors with other colors that you soldered , i followed your video but it did not work i used a pc power supply to use the 12v yellow cable and one black. but it didn't work .. I can't say if it's because my adapter is a little different from yours or if I did something wrong .. can you help me ?

[@vmcdiytech3681]

OK, share your images and additional details to my email:- [e-mail]

[@tectudoentretenimento5067]

@@vmcdiytech3681 seu email não ta aparecendo , certifique-se que seu email esta correto e me envie novamente

[@tectudoentretenimento5067]

@@vmcdiytech3681 (vmcvamsi166 @gmail.com) DIZ NÃO ENCONTRADO..

[@tectudoentretenimento5067]

@@vmcdiytech3681 SE FOR POSSIVEM FALAR PELO ZAP:[phone]

[@tectudoentretenimento5067]

@@vmcdiytech3681 CONSEGUI ENVIAR AS IMAGENS .. O Email que você enviou veio com espaço entre os caracteres por isso não tinha conseguido enviar , aguardarei sua resposta .. agradeço sua atenção

[@mireacristian4713]

It's possible that the 12V from "the charger" to transfer through usb and burn your laptop/pc motherboard ?

[@vmcdiytech3681]

No its not possible,if you solter perfectly according to pin out otherwise you may damage your motherboard, if you are new to electronics i won't recommend, if you have lot of experience you can do according to pinout i show ,you need to do at your own risk video is for reference only ,its works for me till now no problem for me i am using with my laptop

[@shrikanthbasavaraj3947]

Same question, 12v all so go to computer port and pc maybe shut down

[@flyingshorts8801]

My Seagate hdd SATA pins are broken, what can I do?? Give a solution please 😢

[@vmcdiytech3681]

post me images, or link of Google drive, i can help you after seeing images, sorry for late response, i am in hospital 🏥

[@mohamedanbar8011]

The 3.5" hard drive is label 12v and 5 v , how you powered it with 12v only ?

[@vmcdiytech3681]

Hello my friend, thanks for your comment, the 3.5 hard drive is lable as 12v and 5v you are right ,since 12v is supply from 12v adapter (power supply) and 5v is supply from usb which is connected to laptop, since both 5v and 12v ground (negative (-)) is joint together its works good. (if you are new to electronics please don't try this )

[@danielmcmaster1392]

The hard part about this is why he powered it with 12v at all, as far as im aware, any hdd with a standard 22 pin sata connection can run on 5v at less than 1A, if you look at the pdf on wd website, start up requires 2.5W and the 3TB is the most power hungry at 8.0W max. The 8TB surprisingly is only 5.4W and usb2.0 can do 5W, considering usb3.0 can do up to 5V 3A for 15W or up to 9.75V at 1.6A or about that, 3.1 gen2 is like 65W. This video is only 3 months old, you could run a raid10 off a type-c and people do, but they use things like the crucial 500GB m.2 nvme drives on a raid card and max out the 10Gbps data rate of a type-c by a good margin, that drive there is cheaper I'll definitely not argue that but it ways a ton and is not something I'd want to lug around on top of what a laptop already burdens you with and the performance in a word "sucks" plus by adding a 12V power supply your adding another load to your laptop bag and necessitating a power point when the newer portable chargers that most people still have for phone emergency situations are insane enough to charge not only your phone but power a number of drives, Oh and the laptop those drives are connected to. Man, I really appreciate the D.I.Y attitude, thats what got me to this video but honestly a usb to sata converter, even type-c is like $8 if you don't buy it from a petrol station and if your still using a spinning drive, your not worried about the bandwidth of your connection, without at least a little 2.5 sata ssd caching that old school beast, your not gonna not gonna be break any fps records, sequential write from its cache would barely rattle usb2.0 and there's a whopping 32MB for it to work from. If you really need that much storage, I honestly can't think of a reason with clouds and hotspots, but if you do, firecuda hdd with m.2 slot preinstalled and configured to use an m.2 smart cache is about $500 and a m.2 if you use your fingers and your googling abilities is 100. Its about 4 times what that drive costs but thats what it costs to get a file before your OS is no longer supported these days, or you can get a 500GB m.2 and a case for about $130 and have 2GBps in your shirt pocket, I put mine on a keyring and I can empty and refill that thing in a few minutes before I go out if I ever had too but I don't, I mainly use it for my phone, it's full of apk files plus exe files that I'm always having to install on someone's computer because they are still scratching their heads and its still not managing to bring up the answer they need the way Google has a habit of doing. You could probably get a free m.2 if you didn't mind a bit of muck around, Aliexpress have x79 motherboard packages that come with a pair of xeon CPUs, a bit of RAM and an m.2, keep the drive, Ebay the rest and you might even make a buck or screw it to a wall with that wd drive and have a server that can also throw about a million cores at any data crunching thats keeping you from gaming on your awesome new m.2. Also, I'm actually trying to do the opposite of what you did, i bought a 4TB Toshiba just to fill with compressed crap that I'll probably never use again but when I cracked it open to chuck it on sata so its not hanging around and windows won't argue with me so much and I discovered that Toshiba the cheaky buggers have realised that they are selling external devices cheaper because the market is greater but losing the more profitable sales for people want to add size to a fast drive and they went and put a usb 3.0 micro b of all bloody things directly on the pcb. Everybody makes usb to sata, nobody makes sata to usb, i have the wiring pinouts for both but I am not even close to adapting the pcb design to reverse the idea or i would just heat gun it off and daughterboard a sata on. If you figure that out, I will be a very interested man!

[@JuanMendez-zv5qd]

@@danielmcmaster1392 mucho texto xDxD

[@leodaniel5245]

Hai, I dont understand the purpose of cutting the 9 soldered wires from the board and again soldering it?

[@vmcdiytech3681]

Haha ha its just for making clear video to show colours ,if you don't like to cut no problem ,keep like that and give additional power 12v

[@leodaniel5245]

@@vmcdiytech3681 Thanks VAM C. You are a life saver

[@abod898]

i need some help I'm using this connector on my phone but the hdd is drawing too much power from phone like 5% per minute i make soldiered wires for external 5v but hdd doesn't work with external 5v it only works if powered by phone is there any thing i can do ?

[@vmcdiytech3681]

did you connect ground common for hdd to 5v power supply and mobile ??? if not try that ,i hope it works definitely, i didn't tested but if hdd works with your mobile then it works ,may be increase amps of your power supply up to 2 ,may be it works....,which mobile you are using

[@abod898]

@@vmcdiytech3681 My phone is lg v30 port is usb-c See the pic: photos.app.goo.gl/7wSDiAdahaxR2d4N9 i soldered the white wire to the red(5v+) and the other to the ground(black) the other end of it goes to usb charger or power bank but it doesn't draw power from it it works only if phone connected first - if connect the external 5v after phone it changes nothing

[@vmcdiytech3681]

@@abod898 thanks for sharing image ,i think you are using internal harddrive which is used in desktops ,is that right ,if its internal harddrive then for spinning disk it requires 12v power supply, how can you see data when you connect to your mobile, its impossible to see data ,because those sata to usb converters are works in laptops or pc only ,please stop your project immediately otherwise you loose your harddrive or mobile ,please don't take risk you loose your data if harddrive is corrupted, and never come back ,you need through that harddrive for scrab even your mobile also get some damage, kindly stop it immediately, if you need to try then do more research on that because small mistake leads to a big loss, I WON'T RECOMMEND NOW

[@abod898]

@@vmcdiytech3681 yes it's internal hdd i formatted it in exFAT so it's working on phone it works great and the speed of writing is amazing no problems at all except for the 5v power drawing from phone is real quick and yes it needs 12v for it to work , i have a dc power supply for that

[@ignacio4152]

Can i addapt ata/ide to an usb port the same way as u did?

[@vmcdiytech3681]

No, you can find other devices like this for that ,buy that from store

[@mattnecesario7136]

Background music title everyone?

[@BhargavSushant]

can we combine two SATA adapters ?, I have some 2.5 HDD laying around, selling them is not an option, so I want to combine them into one RAID arrangement or even as an external drive, but multiple external drives is too much clutter, I want a single unit with multiple HDD, online options are not trustworthy as all are imported ones and I can't claim warranty on them.

[@vmcdiytech3681]

yes i think , but we required some chip to read and write data perfectly, search online wether there is any device that connects two hdd

[@claudiobisceglie4503]

Hallo VAM C, good video. I have a question for you. I have a motherboard with SATA II (300MB/s) and USB 2.0 (35MB/s) slot. I think that it is possible to get from motherboard SATA II connector an about USB 3.0 (300MB/s but not 400MB/s). I have installed a USB 3.0 expansion card on PCIe x1 1.0, but it gives 250MB/s. What do you think? Is it possible?

[@vmcdiytech3681]

Hello claudio bisceglie ,yes the data transfer is low for usb 2.0 when compare to usb 3.0 ,as you told that you have inbuilt 2.0 slot in your motherboard and you attached 3.0 expansion card to that motherboard but its not giving full speed of data transfer because your processor capability is low and its not stable for such a speed data transmission if you do like that very soon your motherboard becomes over loaded and get hang and over heated so don't pressure your motherboard to do work with much speed, it may damage soon

[@tectudoentretenimento5067]

ei cara , eu tentei só que meu adaptador é um pouco diferente do seu .. ele não tem esses conectores com outras cores que vc soldou , eu segui seu vídeo mas não deu certo eu usei uma fonte de pc pra usar os 12v do cabo amarelo e um preto . mas não funcionou .. não sei dizer se é por que meu adaptador ´r um pouco diferente do seu ou se fiz algo de errado .. sera que você pode me ajudar ?

[@zerdagdir1988]

so you added a parallel source?

[@vmcdiytech3681]

yes

[@zerdagdir1988]

@@vmcdiytech3681 is your source regulated? or how do you know it won't burn the hdd?

[@vmcdiytech3681]

@@zerdagdir1988 I referred different brands of hdd's and seen their power configurations and smps powder configuration and then i came to conclude, i referred 6 months to collect data and verified and then i did this after success i posted video on KZbin to help people ,i did not use parallel sources , hdd works with two power sources for data transmission it requires 5v dc is enough, to spin disk it requires 12v dc , amps will be not a problem ,but minimum 2amp is required to spin brushless dc with out issues, i hope you got clarity now, if you are doing this be careful when connecting and disconnecting ,you need to powder up 5v and 12v at a time ,otherwise sometimes hard disk may corrupted and your data will never come back again so remember this tip and must follow, thanks for your comment

[@zerdagdir1988]

@@vmcdiytech3681 thanks for you reply too, I honestly didn't expected to find a video on my problem but to my luck I found it, and I'm glad that I did

[@donjohnson4347]

How would you connect a 12v power supply to a harddrive adapter , the one with the color cables y,b,b,r (older model)

[@vmcdiytech3681]

Please upload pic to my email [e-mail] and notify me on KZbin comment

[@synxc1716]

I see that you only connect the red wire onto only 2 of the pins but the text said 13,14,15. Wdym?

[@vmcdiytech3681]

Sorry for late reply, thanks for your comment, what you told is right ,i connected to two wire the other is internally connected ,if you have multimeter, place knobe in continuity mode and test them ,the beep sound will come that means they are in connected to each other ,hope you satisfies with this answer if you not understand comment me again ,have a great day .

[@binnyverma3969]

That's nice! Sir. please help, I want to change my play station 2 's remote control into usb

[@NaqasakiAlbom]

may I know how you connect this red wire to pins? like with the help of what?

[@vmcdiytech3681]

I solder red wire with 12v input pins of sata connector ,please go through pinout of sata connector given in video

[@jaswinderlal3543]

Hello sir kya hum red wali sata cable ke ek tarrf USB port lga skte hai agar ha to please btayen kaise lga skte hai m wait for ur answer thanks

[@vmcdiytech3681]

i didn't understand your question can you ask in English bro

[@erickgarcia6324]

👍🏻👍🏻👍🏻

[@vmcdiytech3681]

lo siento, su idioma no se entiende, por favor publique su comentario en inglés hermano, si sé que lo ayudo .....

[@Zeptrio]

sadly not worth while to do if you don't have the powersupply in the first place =/ i imagine there's no other way around it though need those 12 v at all cost.i'll probably buy a new cable made for 3.5 one day then. nice video anyway.

[@SedMi-gc9ro]

Buen video amigo pudierar dar el diagrama del adaptador .

[@muchules9417]

Hi, I did not get the part where you unsolded all the parts then soldred it again, can you explain to me? I am interested in that project too.. Thank you VAM C

[@vmcdiytech3681]

This is not project its a solution for people who try to use their harddrive with usb ,and i don't know what you have and you bought

[@siahaandesain]

How if power adapter 12v 500mA? I tried and still not working, or maybe need 2A like yours.

[@vmcdiytech3681]

Hey i am feeling happy to see your comment, i think at least more than 1amp required to spin harddrive disk ,better go like me instead of experiment, if you have 1amp lets check or buy 2amp ,polarity must important while connecting. Have a great day

[@vmcdiytech3681]

Hey i am feeling happy to see your comment, i think at least more than 1amp required to spin harddrive disk ,better go like me instead of experiment, if you have 1amp lets check or buy 2amp ,polarity must important while connecting. Have a great day

[@siahaandesain]

Ah, thanks for replying. Now I'm understand. Thanks for video. 😉

[@shanonmartial5839]

My SATA to USB converter has 2 USB pins, how to do it?

[@vmcdiytech3681]

yes , some sata to usb has two usb-A male pins , that is because one is for transferring data and other is for power source, inside both are connected with each other

[@genesisdiazm]

Me gustaría poder apreciar el orden de los cables en el lado de cinco, no puedo reconocer los colores. Además, dónde va el negativo para la alimentación. Gracias

[@tectudoentretenimento5067]

hey man , você recebeu as fotos que enviei no e-mail pra você? pode me dar uma resposta se é possível resolver esse problema?

[@vmcdiytech3681]

yes ,i saw your email and i replied you yesterday, check your email

[@vmcdiytech3681]

check your email

[@robertosender299]

Hola Vam C ,tengo un adaptador similar al tuyo pero no logro hacerlo funcionar,seguramente por mala interpretación mia de las conexiones.Sería posible enviarte el diseño del mio para que puedas aconsejarme a pesar de lo muy claro y aparentemente sencillo de tu excelente video.? Saludo desde Argentina Roberto Sender

[@vmcdiytech3681]

hola Roberto Sender, gracias por tu comentario en KZbin, ¿para qué estás usando ese adaptador? y explíquelo claramente, cuando solicite enviarme su diseño, aquí está mi correo electrónico de identificación [e-mail], adjunte información e infórmeme en comentarios en KZbin, manténgase seguro / salva vidas con Corona, gracias, que tenga un gran día, amigo (si sabe inglés, publique los detalles solo en inglés, no sé español) 🙂😃

[@helderjesus8408]

Faz um video como fazer passo a passo🤝🏻

[@ZARIA01]

muchas gracias amigo, funciono perfecto

[@arcanjo9364]

What name of music?

[@mauricioasc2790]

Muito bem explicado!

[@pauloandrade6801]

TOP...

[@philip2618]

is he breakin one to make o ne?

[@vmcdiytech3681]

No bro, actually long back ago i bought wrong product, after i study on that ,i broke that and remodel into working one what i required. i am still using this with out any problem, since it is usb 3.0 it won't work in usb 2.0 usp ports

[@farazhashmi8507]

Same issue with me also

[@WishGranted-u8r]

I'm slow learning 😅😅

[@loverboy7131]

❤❤❤❤❤

[@sauveurcarvajal4697]

WHAT IF ????? MBR Files of HD is missing or corrupted ?

[@vmcdiytech3681]

Sorry i don't know ,please search in google

[@JHONNY徐杰尼]

greetings friend. does it work with 1tb? thanks for responding....its super good!

[@vmcdiytech3681]

THANKS for asking, but sorry to say i did not tested with 1tb because i don't have 1tb but i think it works for all hdd,try your own dude

[@skopenhart6669]

Can we make without the board

[@vmcdiytech3681]

No its not possible without board

[@richlee1253]

can u give me the diagram for the wires bro

[@luckybiswas325]

m unable to identify the power cable

[@vmcdiytech3681]

share images of your devices to my email [e-mail] and notify after you done ,i try my best to help you out

[@gwaygeewaay4253]

Ya like I just have all this stuff laying around

[@ronk4276]

Hi Bro. I have an old 160GB/7200rpm/8M/PATA HD and I wanna reuse it (I got many old Hard Disks indeed, PATA and older), and I'd like to know if you could help me to adapt a PATA connection cable to USB. I'll do appreciate your help if possible.

[@vmcdiytech3681]

Hello ronk, There is ready made adaptors are available for all types of hard drives, PATA hard drive is working with 12v power supply ( disk spinning starts when you supply 12v to hdd) so you need to match your PATA connector and adtional power supply (12v) when you buy

[@ronk4276]

+VAM C Thanks a lot. I already found adaptors on Amazon, I just wanna know if was possible a Do_it_yourself solution.

[@vmcdiytech3681]

@@ronk4276 No its not impossible to make DIY ,we need usb converter board to convert data from PATA to usb ,if you have 3.0 ports in your pc buy 3.0 usb converter

[@Manga2limaelimao]

Quero saber o esquema eletrônico dessa placa....

[@vmcdiytech3681]

este não é o meu próprio conselho que você precisa comprar loja online

[@kkumar-kkr7727]

Thanks bro.

[@totosusilo6490]

Saya sangat suka.tapi terkendala bahasa

[@honoretech9308]

Merci a vous

[@rafaelztigre]

me gusto tu video pero no tengo la entrada sata que tienes solo teng un usb normal y corriente y la entrada de sata de mini lapto de fleje que se me daño el fleje donde entra en la pc y el regulador de 12 voltios si me puedes ayudar en ese caso te lo agradeceria

[@vmcdiytech3681]

Rafael Marin ,explica tu problema claramente ,no entendí

[@rafaelztigre]

ve yo quiero hacer un adactador de sata a usb pero no tengo el enchufe que utilizas alli para el disco duro pero si tengo uno que se me daño de una mini lapto que puedo tomar ese como enchufe al disco duro pero me falta tener la fabricacion de como hacerlo teniendo eso el usb unibersal y el regulador de voltaje de 12 voltios.... ojo solo me falta saber la conepcion en el usb osea como van conectados los cables

[@gcdani271]

Pleas make a wiring diagram

[@vmcdiytech3681]

the wiring diagram is not similar in all cables according to chip present in connector the wiring diagram will change

[@Wymyslony-Dziadek-w-Chmurach]

BRAWO THX

[@jaswinderlal3543]

Sir, can we make red color sata cable to usb converter at home without anything buying. Or Can we joint usb port to one side of red sata cable at home without anything buying Sorry sir I am not perfect in English. I am waiting for yours solution With Thanks

[@vmcdiytech3681]

Hello Jaswinder lal , its impossible to convert red color sata wire to usb directly , because we want to convert (or) decode sata data to usb and usb data to sata ,so we must want to buy that conversation board

[@pedrozarur3545]

excelente...

[@jubayersami8836]

what is the name of this cable

[@vmcdiytech3681]

It's an USB 3.0 cable

[@cheezeboyz2549]

its a sata to usb convertor used to connect hard drive as external jhard drives

[@OnlyRedX]

You literally took a adapter and make one from it that’s completely bullshit i need it to be a diy something that i dont have to buy!!! I need a separate piece

[@vmcdiytech3681]

you can't do it by diy, because you need that ic/processor present on converter to convert and read data from sata to usb and for that you need some software's tooo to read data from HDD and communicate with your PC , you can't find it in open source, so don't try to do that

[@OnlyRedX]

@@vmcdiytech3681 so you cant take a port from a laptop and make it into a usb one

[@rafaelztigre]

amigoooo dejame tu correo para enviarte una imagen de el adaptador que tengo para fabricar eso que tu estas fabricando para ver si lo que yo te go me sirve

[@vmcdiytech3681]

sorry for late reply , my email [e-mail]

[@rafaelztigre]

@@vmcdiytech3681 ese conector lo tiene una computadora portatil del gobierno de mi pais aqui se llama conector de disco duro canaima

[@vmcdiytech3681]

@@rafaelztigre ok, no hay problema, debe comprar el panel convertidor sata a usb en la tienda en línea, de lo contrario vale menos, no convertimos los datos sin el panel de conversión, mantenemos ese conector seguro que puede usar como característica, gracias por su comentario

[@rafaelztigre]

pero me gusto tu video buenisimo

[@vmcdiytech3681]

muchas gracias ,no conozco tu idioma,soy de india ,sabías inglés,dame tiempo ,puedo resolver tu problema.

[@rafaelztigre]

ok amigo si me puedes ayudar te lo agrasco

[@rafaelztigre]

yo espero tu colaboracion gracias mi whasapp por si me puedes pasar unas imagenes de como hacer ese adaptador [phone]

[@vmcdiytech3681]

Rafael Marin ok amigo,pero tu número de whatsapp no se muestra,envía el número correcto hermano

[@rafaelztigre]

[phone] o dejeme su numero de whasapp y asi lo agrego aquiy le escribo

[@vmcdiytech3681]

Pero necesitas comprar esa placa para convertir datos de sata a usb

[@DelthaX]

Oye, tengo un cable AX6 de una laptop, quiero conectar con por USB a la computadora, www.amazon.com/dp/B014VP08P6 es este, sabes cómo hacerlo?, Si es que sabes, puedes hacer un vídeo de eso?

[@elotroladodeverlascosas6581]

Usb 3.0 a sata sin adaptador kzbin.info/www/bejne/l6WpiKBmbrKHhc0

[@elylopez3360]

Un video mudo no tiene valor.

[@udayakirank7923]

Did not work bro🤯

[@vmcdiytech3681]

Hoooo, did you bought right one ,let's check connections again and try bro if not i can't do anything, you need to buy new one

[@juanmartinez4753]

No pasa del 0:25

[@vmcdiytech3681]

Thanks for your comment with this issue i just contact KZbin and they will reply as soon and i rectify as quick as possible

[@vmcdiytech3681]

Hello your problem is solved , video is playing full

[@juanmartinez4753]

@@vmcdiytech3681 ok

[@juanandrade3942]

do not be ignorant .. a hard drive uses 2 volatjes .. +5 and +12 volts, ... and its feeder only provides one .... greetings to all the wicked .. crazy face more flash your video .. the hard drive needs 12 and 5 volts and you just put a power supply of how much it will be .. ???? your funny video is not good

[@vmcdiytech3681]

THANKS for your comment ,actually i am thinking that you did not watch full video in normal speed, you did fast forward, and commenting that i am ignorant, if you watched full video in normal speed only then your eyes have some problem , see again full video so you can get your answers in video it self not from me

[@diyroby732]

@@vmcdiytech3681 Thank you for the video VAM C, very helpful and clear.

[@icountu]

5v will be provided by host.

[@vmcdiytech3681]

@@icountu can you explain in detail

[@javitz8847]

Suponiendo que hablas español tu eres el ignorante, porque este youtuber lo hizo bien. Los 5 volts vienen del usb, y los 12 volts del adaptador, es que estás muy estúpido o no te diste cuenta de eso

[@pauloandrade6801]

TOP...