DIY 200W TRANSISTOR BASED SUBWOOFER DRIVER (2SC5200 AND TTA1943)

Hey, guys welcome back .in In this video I am going to showing you how to make a 200w transistor-based subwoofer amplifier driver. This project is based on power transistor and this driver will easily handle on 12-inch subwoofers like JBL 1500w Subwoofer also....
project components list
1. 2SC5200 TRANSISTOR X 2
2. TTA1943 TRANSISTOR X 2
3. TIP41C TRANSISTOR X 2
4. TIP42C TRANSISTOR X 2
5. IN4007 DIODE X 5
6. A1015 TRANSISTOR X 3
7. 0E335V RESISTOR X 4
8. 100 OHM RESISTOR X 2
9. 6.8 OHM RESISTOR X 2
10. 270 OHM RESISTOR X 1
11. 1 KILO RESISTOR X 1
12. 10 KILO RESISTOR X 1
13. 56 OHM RESISTOR X 1
14. 27 OHM RESISTOR X 1
15. 820 OHM RESISTOR X 1
16. 220 OHM RESISTOR X 1
17. 18 KILO RESISTOR X 1
18. 39 KILO RESISTOR X 1
19. 1UF/63V CAPACITOR X 1
20. 47UF/63V CAPACITOR X 1
21. 220UF/50V CAPACITOR X 2
22. 105J/100V CAPACITOR X 2
NOTE;;;; must be add powerful heat sink ....
videorockola website -- www.videorockol...
videorockola 200w amplifier -- www.videorockol...
Project schematic link - photos.app.goo...
"Thank you for watching! If you enjoyed this video, please consider subscribing to my channel for more content like this. You can also follow me on my social media channels for updates on my electronics projects and CGI videos. As a 3D animation maker, I have also uploaded my animation works on this platform.
If you have any questions or comments, feel free to reach out to me via WhatsApp at [8807649871]. Please note that I only accept messages and not calls.
Here are the links to my social media channels: 👇
[Twitter - As...]
[Instagram - ...]
Thanks again for your support! I look forward to connecting with you and sharing more of my work in the future."

[@KmrAudios8270]

Ohseme bro excellent I like this video....

[@t2fitness721]

Good work 👍👍👍👍

[@bobbyskumar4408]

Nyc Project Sir 🧐🤓🤓

[@gautamdas4524]

Thank you sir

[@ajithev3416]

Infinity primus 1270 and jbl 1500 which is best subwoofer

[@Circuitoptimize23]

Best one is JBL 1500... Infinity 1270 also good but compare JBL 1500 model, I highly recommend JBL 1500..

[@tipspoint3971]

Bro 4 ohm 300 w subwoofer support This bord

[@tipspoint3971]

Thanks sr thanks

[@jinexsaikia]

You have not mentioned the watts in resistors😒

[@jinexsaikia]

On my board 270ohm resistor is getting red hot?

[@imth3onelsi]

Can it support Kenwood 200w subwoofer? Does it Have noise?

[@Circuitoptimize23]

Yes, it's suitable for a Kenwood 200-watt Subwoofer. However, please keep in mind that driving a 200-watt Kenwood subwoofer with this amplifier will require a high current, which can put a strain on the amplifier. The issue with this type of transistor amplifier is that it can't handle high currents well, leading to overheating and a faster deterioration of the driver. If you are using a 200-watt Kenwood subwoofer, I highly recommend using a MOSFET-based amplifier driver. It's a perfect match for your needs, as it can handle the power requirements more efficiently and is less prone to overheating issues. Regarding the noise produced by this amplifier driver, it does generate a small amount of noise, but it's generally not loud enough to be a significant concern.

[@appleberry4051]

Please make transistor amplifier driver bro

[@Circuitoptimize23]

Soon as possible..

[@ashwinrock5135]

Superb project brother may i know the maximum operating voltage and ampere for this circuit

[@Circuitoptimize23]

30-0-30/7 amps are 24-0-24/10 amps..

[@hackdroid8222]

Sir how much did it cost to make in on Vero board I live in Mumbai near lamingition Road it is full of electronics parts and components

[@user-po6ys3qj7w]

❤️

[@bijalinsworld]

How much input voltage in this circuit??

[@Circuitoptimize23]

20-0-20 5 amp's to 30-0-30 10 amp's

[@MAK786GO]

​@@Circuitoptimize23sir can I give 36 0 36 please reply

[@MAK786GO]

If I want to give 37-0-37 V dc what should I change in the board? I'm your subscribe please 🙏 reply ❤❤

[@MAK786GO]

I will be back soon ❤❤😊

[@ManishKumar-sn5xi]

Sir ye board kitne price mein taiyar ho jayega please answer me 👍😍😍😍

[@ajithev3416]

ROCKFORDFOSGATE R1S412 AND JBL1500 OR JBL1300 WHICH IS THE BEST SUBWOOFER FOR HOME USE

[@Circuitoptimize23]

I highly recommend you JBL 1500... This one is the best subwoofer in home use....

[@amitkumar-kc8vl]

5532ic ka subwoofer only bass ka video

[@achilledipalma4791]

Can I use it whit a normal car speaker? I thinked to make 5/6 of that and made a car amplifier, but only if I can drive normal speaker, also, if I can't, can you link me an amplifier that can do that?

[@Circuitoptimize23]

This circuit only for subwoofers... 10 to 12 inches...

[@achilledipalma4791]

@@Circuitoptimize23 and can I put some of this in series?

[@achilledipalma4791]

@@Circuitoptimize23 and also, I have already like 50w RMS in input, can you help me to customize this amplifier for my situation?

[@octacoreshivu190]

Is this suitable for pioneer 400watt subwoofer?

[@Circuitoptimize23]

Yes

[@polantopolanto2908]

Can i use 12 0 12 5 amp ?

[@Circuitoptimize23]

😂 No, buddy. If you apply a 12-0-12 5-amp transformer to this circuit, it won't function properly. This circuit uses power transistors and requires at least a 24-0-24 10-amp transformer for better performance. So, if you only have a 12-0-12 5-amp transformer available, you can simply build an amplifier based on the TDA2030 or TDA7294.

[@sujitchakraborty2623]

Sir, for sub-woofer purpose which is better option TDA7294 based ic or 2SC5200 based transistorised audio?

[@Circuitoptimize23]

Transistor amplifier is best that means 2SC5200 and 1943 mono driver is best and powerful for subwoofers. TDA7294 is suitable for low quality Subwoofer. Compare 2SC5200 and 1943, TDA7294 is very very low quality. Anyway I suggestion you will trying to make a powerful subwoofer driver, then I suggest this circuit, I Mean transistor based 2SC5200 and 1943 driver. This circuit is easily handled to JBL 1500w subwoofers.

[@sujitchakraborty2623]

@@Circuitoptimize23 Ty Sir.

[@tipspoint3971]

Bro make bridge bo rdto 400w

[@siamnd666]

can i replace tip41c with tip35c?

[@Circuitoptimize23]

The TIP41C and TIP35C transistors have different characteristics and specifications, making them unsuitable for direct interchangeability. The TIP41C is a medium power transistor with a maximum collector current of 6 amperes, while the TIP35C is a higher power transistor with a maximum collector current of 25 amperes. These variations can impact the performance and reliability of your amplifier. To ensure proper functionality and prevent potential issues, it is recommended to adhere to the original design specifications or consult the datasheets of both transistors for a thorough comparison.

[@siamnd666]

@@Circuitoptimize23 hey sir i made the circuit by tip35c insted of tip41c and its worked but TRANSISTOR a1015 getting hot a litle is it becouse i replace tip41? -another question the sound was not clear eaven i put high value capasitors in power input how can i fix it ? thanks

[@yuvrajtred]

Ye pcb bord kaha milega

[@warriorcrew785]

I want play only subwoofer how can i plz i need amp only for bass

[@Circuitoptimize23]

Add subwoofer low-pass filter module. That's only produce bass frequency

[@warriorcrew785]

@@Circuitoptimize23 bro can i get ur number I want to talk something....

[@gadiledan2098]

resistor OE335V bisa di ganti pakai ukuran berapa mas?

[@sriparameshwariharvestersu8148]

Subwoofer ohms bro

[@sunnymondal1534]

2sc5200 vs c5198 which is better ?

[@siamnd666]

c5200

[@tipspoint3971]

sr This circuit connect to jbl subwoofer ??

[@Circuitoptimize23]

Yes it's perfectly suitable for JBL subwoofers. like JBL 1300 to 1500 models...

[@tipspoint3971]

Ok

[@tipspoint3971]

Please make another video

[@Circuitoptimize23]

Which related

[@tipspoint3971]

Amplifier

[@thermioniclover904]

How much it cost when you do by yourself?

[@Circuitoptimize23]

I spending only ₹400 rupees including heatsink

[@thermioniclover904]

@@Circuitoptimize23 where are you from ?

[@Circuitoptimize23]

@@thermioniclover904 INDIA / Tamilnadu..

[@thermioniclover904]

@@Circuitoptimize23 Me too bro

[@Circuitoptimize23]

You from tamilnadu??

[@swamyA8884]

Transformer price how much sir

[@Circuitoptimize23]

30-0-30/7amp Transformer ₹1,300 24-0-24/10amp Transformer ₹800 👆 Both Transformer are Suitable for this Amplifier circuit....

[@swamyA8884]

@@Circuitoptimize23 thank you sir🙏

[@nalanraj415]

Us 40.0.40 DC

[@Circuitoptimize23]

Maximum 30-0-30 10 amps

[@MAK786GO]

If I want to give 37-0-37 V dc what should I change in the board? I'm your subscribe please 🙏 reply ❤❤

[@gadiledan2098]

no nois?

[@Circuitoptimize23]

Depend on your Input and circuit setup...

[@gadiledan2098]

@@Circuitoptimize23 Resistor oe335v or 33 5w?

[@Circuitoptimize23]

0E33-5v

[@gadiledan2098]

@@Circuitoptimize23 In Indonesia, there is no OE33 5V resistor, what size resistor instead? here are 33 ohms 5w

[@yuvrajtred]

Ye pcb hume chaiye

[@Circuitoptimize23]

Sorry sir I didn't understand you language. Please talk on English...

[@naveensai1176]

@@Circuitoptimize23 you are really genius great work brother

[@Crazy_XYZ_Bass_Test_2.0]

Marvel movie.. 😂🤣😂🤣

[@yameteeoniichan2501]

Sir i made the circuit and all evrythink is same as ur circuit but 820ohm and 2 of a1015 getting hot when i put power input and there is no any sound comes out please help🙏 and if u have Instagram can i contact you?

[@Circuitoptimize23]

Contact what's app.. Number available in the video description

[@yameteeoniichan2501]

@@Circuitoptimize23 but the ur phone number is not on WhatsApp its says invite to whatsapp?

[@yameteeoniichan2501]

@@Circuitoptimize23 hello?

[@Circuitoptimize23]

Country code [phone]