DIY 2013 2014 2015 2016 2017 Honda Accord Replacing Belt Tensioner

Watch how to replace belt tensioner on a 2013 2014 2015 2016 2017 Honda Accord. #honda #hondaaccord
2013 - 2107 Honda Accord Replacing Serpentine Belt: • DIY 2013 2014 2015 201...
Part & Tool Used:
Belt Tensioner - amzn.to/43JhLrn
8mm Hex Socket - amzn.to/3WPNfwb
3/8 Socket Wrench - amzn.to/4bONMTn
17mm Wrench - amzn.to/3QS32qy
12mm Wrench - amzn.to/44M3pbP

[@Mo.Jo.]

Where can i get the serpentine belt diagram for my vehicle? I can't find the diagram in my owners manual, under the hood or anywhere online. My vehicle is a 2016-2022 Acura ILX.

[@Mo.Jo.]

What are the torque numbers for the 2 fasteners on the tensioner?

[@simplylivingbygrace]

The dealership suggested I change all drive belts on my Honda 2013 accord. Where can I go for a cheaper price . The dealership charges to much

[@MobileCarMechanic]

You can always goto an independent mechanic, they are usually way cheaper than a dealer.

[@laviebanale]

You should do a video on replacing Honda struts.

[@MobileCarMechanic]

Thank you for the suggestion. We will look into it and try to have a video soon on struts. Cheers!

[@laviebanale]

@@MobileCarMechanic Should you go w/ OEM tensioner or would a aftermarket like Dayco be ok?

[@MobileCarMechanic]

We went with an aftermarket Chinese version and it failed after a year or so. We replaced with another after market on the video. OEM will usually be the best but not the cheapest. Day I would be better than the knock offs on Amazon.

[@kidbehindacamera1231]

Could you do a Brake bleeding on Honda accord video in the future?

[@MobileCarMechanic]

Yep, will work on it. Thank you for your support.

[@johnlewisiv4303]

I’m having trouble finding the 12 millimeter bolt. Can you tell me the actual name of it?

[@corey_]

Is this part still holding up or have you had to replace it? Still the same one linked in the description? Thank you

[@MobileCarMechanic]

It's still holding up and its the same one in the description. We had ordered a different brand previously from rockauto.

[@merosanto15]

Great video! When should I replace the belt tensioner?

[@MobileCarMechanic]

It’s not really a item you replace often. But we initially replaced it because both the alternator and the tensioner pulley bearings were bad making a loud sound. If you hear any noise, the belt has too much slack, or in our case the fluid leaking then replace.

[@Striker50_]

When it starts making a supercharger sounds. I have a video of the noise on my channel

[@definitionXrp]

I have a rough idle 2013 v6 what maintenance can i do to get my engine smooth...i have 171k mile

[@Striker50_]

Get your valves adjusted. Clean your throttle body. Clean your injectors. Make sure your have good spark plugs@@definitionXrp

[@JUDGEME5150]

Put some mehkos on the bearings so they aren’t stiff.

[@Striker50_]

Nice vid! I made a longer version of this along with the serpentine belt replacement on my channel. Idk if that was an aftermarket tensioner pulley, but just want to share that I got an aftermarket and it gave out after about a year so I ended up going with OEM again.

[@MobileCarMechanic]

Thanks for the info. We installed a tensioner as well as new alternator due to noises in the bearings.

[@epicdemic215]

Hello do you have a video of the front sway bar bushings? You need to lower the sub frame right?

[@MobileCarMechanic]

I don’t have a video for that. Will look into it.

[@saudiwave]

Nice video

[@MobileCarMechanic]

Thank you!

[@simplylivingbygrace]

Thanks

[@MobileCarMechanic]

Welcome

[@karenterteryan7415]

Побольше про эту машину снимай😎

[@MobileCarMechanic]

Thank you for watching our video. I have more videos on this car on my channel. Check it out.

[@karenterteryan7415]

@@MobileCarMechanicвидео про замену трансмиссионного масла и фильтра очень полезная👍👍👍

[@jessicaguerrero6090]

🔥🔥🔥

[@MobileCarMechanic]

🚨

[@kj5905]

Is the T-50 bolt revers thread?

[@MobileCarMechanic]

It’s not reverse, it’s your typical lefty loosey!

[@kiloyaj]

Was this bolt a t50 or 8mm Allen? I’m having issues today and I thought maybe it was stripped, online says it was a 8mm Allen and man never thought it was a t50 13 Honda accord 4cylinder