DIY: 2015 Dodge Charger HID Headlight kit Install - Enlight Automotive

WARNING!!! THIS IS ONLY A GUIDE! INSTALL AND USE AT YOUR OWN RISK!
Visit:
www.enlightauto...

[@michaelkhoury5181]

This kit is AWESOME! Light quality is amazing at night now, the installation was ridiculously simple, got it installed in a little over 1 hour, needed a few more zip ties than it came with though (think it came with 5, I ended up using like 12) and had to go get an m5 nut and bolt to secure the relay in place (revised kit only comes with 4 bolts, all of which are needed for the ballasts) so keep that in mind if buying this. Also, those "stepper" bits are straight up stupid-expensive, like $90 or more for some... if you don't need a stepper bit on a regular basis, save the cash and just go get a 1" hole drilling bit, it's gonna be at least $70 cheaper and makes it impossible to make the wrong size hole.

[@davidlabounty5133]

I watched the video while installing, this was my 1st time ever. This was extremely helpful, thank you so much.

[@orlandoflores72]

Great video the only thing i do different is look for another place for that passanger side ballast! To close from the windshield fluid. When you filled out you have to be very careful not to spill down on the ballast.

[@ikristian13d20]

Just ordered mine awhile ago. Can't wait until the arrive!

[@original_silverdee]

I have the same setup with the harness but after awhile they would shut off and turn back on, other times they’ll just shut off and won’t turn on unless I start up the car again, I’ve tried everything, using different ballasts and decoders and still have the same problem, my car is a 2015 Dodge Charger Pursuit, don’t know if that makes a difference.

[@ryanjamescristobal2299]

Just ordered a set. Thanks for the install video!

[@DavidLGaming]

I’m A customer that bought a kit!!!! Great but just was asking when are the bulbs going to be available for purchase got a bulb that is out

[@JWhartSr88]

those were definitely two different headlight dust caps that you used. where did you get the caps that you used for installation?

[@JWhartSr88]

Those were definitely two different sets headlight dust caps that you used. Where did you get the pair that you used for installation?

[@chavezisnottwo]

Are they 5,000K, 6,000K, 6,500K, etc.?

[@aerostar9376]

Is normal for parking lights to look dim when headlights are on like at 29:37

[@Adam-cc3ml]

they are not different dust caps you drill a one and one quarter inch hole in your dust cap and use the grommet to seal up the hole. my only question is are there any differences between hid projectors and those halogen projectors. ive noticed that my challengers lights have a false cap aloowing me to remove the center of the running lights like on the hellcat wich leads me to believe they made all the housings the same but I thought halogeb projectors and hid projectors were different shaped lenses

[@khindmanatc]

After you discovered what the polarity was for the headlight connector why didn't you show us which was which.

[@2fit2quitsa57]

wouldn't the driver side ballist be exposed to water and over heating ? I just installed mine in my 2016 Charger and I was just wondering if that was a risk to the ballist

[@uski]

I don't understand why you use a relay harness and don't simply connect the ballasts 12v power supply to each factory connector on each side where the bulb was originally connected ? These are 35W ballasts and the factory harness can probably deal with it. Regarding the "CAN decoder" module (god I hate that name), it's probably just a resistor to make the car think a bulb is indeed there.

[@massesbulet]

Can you show us how does look like in street and spread good in road thanks

[@l9ikjam]

this video helped me out a lot. thank you!

[@r1rider174]

very detailed description, thanks!

[@frezno624]

Did enlight go out of business? Looking for replacement partz for my 2015 charger kit

[@Rjelectricfingers]

Lots GREAT TASTE

[@matty_li]

Hi, would my dodge dart need a relay harness? I use the same ballasts and bulbs as you do but off a different retailer.

[@deybevelazquez7996]

i bought a luminous hid kit plug and play whats the difference i did everything u till the relay i dont have that part

[@5ive7even97]

How do we put the dustcovers back on with the wires in the way??

[@ryanbudde1868]

Quick question, I had the HID upgrades installed on my 2016 Dodge Charger and the low beams work great! However, when I turn my high beams on, they are shining up in the trees. Do you know where, if at all, I can mess with the elevation of the high beams?

[@rmcclellan2009]

Ryan Budde, if you move the high beams, it will also move the low beams since they share the same housing!

[@BIGFACTSENT]

why would i want these bright ass lights not trying to annoy people

[@MrAngel7393]

Is it both the high and low beam in this bulb?

[@Jprice010]

Is there any fix to the shadow issue? I have tried to contact multiple companies and no one is responding, is there any fix to the shadow issue? If so what needs to be done? Is there different bulbs I need to purchase? Does anyone know???

[@Azzam.117]

Very useful, thanks man 👍🏽

[@chenry4fitness]

Obviously a different headlight cap is used as one is rounded and the newer one has a flatter back. so how will this flat grommet work on a rounded back?

[@michaelkhoury5181]

+Christopher Henry it's rubber and conforms around the hole pretty easily; the curvature doesn't really make a big impact on the grommet, a hole is a hole.

[@Orange-yp9bl]

Can you do a Honda civic 2013---2015 hids headlights install vidéo.... I see yall sell this on thé website enlight.... I want To buy some hids for my civic 2013 ... Local shops $150 with install included ... In thinking of buying thé ones. Online from enlight ... And do it my self just need that vidéo... 👍👍👍

[@MrDeepguy0012]

Are You Guys Still Selling This Product.?

[@Ellacost831]

would you have these for a 2012 dodge charger?

[@brianrakestraw3353]

My 2015 Chrysler 200 kept shutting off the headlights after it was cranked. I used the same setup, just different products. Do you have or have had any issues with bulb out warnings or computer shutting of the lights while the engine is running? They worked great when the engine was off. I no longer have my Chrysler, but will be purchasing a Charger soon.

[@Enlightautomotive]

+brian rakestraw The 2015 Chrysler's need a different type of HID system. I know exactly what you are talking about. We have special HID systems for The 2015 Rams and 2015 Chrysler vehicles which have the same problem you are describing.

[@harishbaskar3872]

Quick question. The stock projector that comes with the Charger, is it equipped to handle the HIDs? As in, does it make full use of the HID's? or will I be needing a projector update to make full use of the HID's as well?

[@Enlightautomotive]

The stock projectors can handle the HID system and maintain a usable beam pattern with minimal glare. It will not be as good as a purpose built high end HID projector, but it is still a huge improvement over stock. There are some halogen projectors that do not do well with HID's but the challenger's are not bad.

[@marvinquiroz2822]

No Cancellors needed ?

[@JWhartSr88]

They are different one dust cap has lines one doesnt

[@compilation8800]

I but led with no dust cap is that ok?

[@TheSpyderman50]

Was this bulb the Golden White or the Pure White? Do you have a video showing the difference between the two?

[@Enlightautomotive]

The video shows the 6000K pure white bulbs. We will put pictures of the 4300k bulbs on the website soon.

[@joseaxe]

Hi, I was about to mount my kit on my new car and I found that I lost my mounting brackets! :( Is there a way for me to buy the pair of brackets from you? or can you tell me where can I buy some that fit the ballasts?

[@Enlightautomotive]

+joseaxe Hello, did you buy a kit from Enlight? Please send us an email and we can get you a new set of brackets if you have our Kit.

[@Legoman0323]

What the fuck is the size of our bulbs. Seriously been looking (owners manual is gone for whatever reason) I’ve seen 9005, 9006, 9011 and 9012 like wtf. Which one. Thanks if you can tell me.

[@Jbrown2200]

If I was to buy this kit would I be able to change the bulb to get a more blueish color something like an 8000k or a 10000k bulb??

[@vargashv09]

You get the option of choosing the bulb temperature on the website

[@Lazn1019]

I have purchased MANY other brands of HID kits ranging from $50.00 to $180.00 and they all say their kit works flawlessly. While some are brighter than others they all have one thing in common that I am wondering if you have been able to solve. For some reason the way the 9005 hid bulbs sit in the housing, they produce a dark spot or a shadow in the road due to the rod that is attached to the HID bulb. Has Enlight Automotive been able to solve this issue or does your product have the same problem? I just dont want to spend more money and time buying something that i am going to have to return. Thanks!

[@Enlightautomotive]

You are referring to the 2016 models. Hopefully in the next few months we will have a 9005 HID bulb that have the rod in a different location. As now I do not have any that are angled differently. The 2015 models do not have this problem as they are a 9012 bulb type.

[@Lazn1019]

yea it is the 2016 model. I will be looking out for the new 9005 bulbs.....like i said i have bought like 6 other brands so if you guys can change the position of the rod on the bulb then you will be ahead of the game! Thank you so much for your quick reply.

[@Jprice010]

i just installed these and im getting the same shadow issue, is this only with enlight automotive? or do i need to buy another brand?

[@Jprice010]

Has this issue been fixed yet??? Does anyone know which bulbs to purchase?? Need help please!

[@Jprice010]

Laz Nunez hey did u ever hear anything? As far as what bulb to purchase?

[@compilation8800]

When i turn in the led the radio get noisy idont why

[@Jsant2020]

can this kit work on a 2012

[@MiguelTorres-tn8dq]

Will I be able to use my hi beams or am I stuck at low beams only????

[@Enlightautomotive]

You will have both HID high beam and low beam function. You will not lose high beam.

[@DSNCB919]

wait I thought this car came with hids.. 2015 model

[@flycharge6657]

What the best to my charger 2016 .. the 35W or 50W ???? And i need the white light not blue light ?

[@BillieHQ]

Mustafa Alqaisi get 35w 50w gets way to hot

[@kathrynerickson8525]

If you want white, you'll want 5000 or 6000. Any higher than 6000 will be blue

[@TheRealMelinko]

why is the factory connector on the driver side not being used?

[@Enlightautomotive]

+JP Melinko The relay harness only needs one input signal. The signal activates the relay which then sends power to both headlights. The other side is not needed.

[@Randomgohan]

Why u say use at your own risk ? What's wrong with it ?

[@Jprice010]

So I tried to install these and I removed the air box, how ever when I put the air box back on my vehicle was not running properly, had to take it to dealership to get fixed, they said the air box was not on correctly but I followed directions precisely, can anyone help?

[@Enlightautomotive]

Joshua Love You need to make sure you plug the air flow sensor back in, also make sure the 2 halves of the air box are seated correctly. It's easy to pinch the air filter or mis-align them.

[@Jprice010]

Enlight Automotive how do I make sure it's seated properly? Is there anyway to put them in with out taking out the air box? It would prolly be extremely hard, I'm afraid if I take it off again it won't run properly

[@charkizzzy]

can these be used on automatic or have to be turned on manual

[@Enlightautomotive]

+Jorge Charco It is best to use the lights manually. With the auto headlights, if you are parked in a dark garage, when you get in the car start the engine, the headlights will try to come on as soon as the ignition in the ON position. When the starter kicks in, it pulls large amounts of current from the battery. Also pulling power away from the HID ballasts. This may cause the light not to start. In which case you can turn them on manually. Its best to keep the lights off before starting the engine. Then after starting the engine you can leave them in auto. Now that said, most people just run them in auto without issues.

[@charkizzzy]

+Enlight Automotive - Vibrant LED and HID lighting technology I'm asking because places where I have bought hids from have always said to keep them manually, and I have experienced the bulb burning out. thats why i ask. i seen you guys have the 50w is that the ones used on the video? your product seems more better than the ones i have gotten before.

[@GLA45Amg716]

Why do this when they come with Better head lights

[@Enlightautomotive]

+thuglifezeem716 The answer is simple... cost. In order to get factory HID headlights on the Charger, it appears that you have to get the "Plus Group" package option which is an additional $2150 option. I don't think you can just get the HID headlights as a separate option. So You can either spend $2150 for factory HID's, or you can spend a little more than $150 on our aftermarket system and get nearly the same level of performance. Sounds like a bargain to me!

[@GLA45Amg716]

+Enlight Automotive - Vibrant LED and HID lighting technology true ! I might get this for my future charger

[@compilation8800]

Wich is better led or hid

[@BoopSnoot]

LED's are great, if from factory. Retrofit LED for halogen housings are total BS. You don't want them.

[@tha_dude_2477]

Do you guys have kits for 2018 Chargers?

[@leonb.4422]

Michael Clarke I would like to know also.

[@tha_dude_2477]

Leon Burns I bought the 2016+ kit & put it in. Works just fine, no issues.

[@leonb.4422]

Michael Clarke thanks man.

[@Xavierworldpeace]

this looks hard. can i pay somebody

[@qmarkballful]

just use LED's, no cutting and its plug n play with no ballasts.

[@qmarkballful]

IIABODEII pretty sure you should learn reading comprehension. where did I compare it? moron.

[@zalo813]

That's the route I took on my 300C (JVLE)! 😎

[@compilation8800]

Drew Robertson do you have charher?

[@compilation8800]

Charger

[@Kickdrum00]

lol no hemi? yuck

[@JWhartSr88]

those were definitely two different headlight dust caps that you used. where did you get the caps that you used for installation?

[@JWhartSr88]

Those were definitely two different sets headlight dust caps that you used. Where did you get the pair that you used for installation?

[@sunnysingh-qe5bv]

+JWhartSr88 he drilled a hole in the dust cap to modify it to fit the new bulb/wires around 7:40 in the video

[@JWhartSr88]

+sunny singh they're two different caps one has lines the other didn't look again closely

[@juanfl17]

Do they work on the 2015 challenger