Thanks so much. Very detail for switching out Head light bulb. Maybe you can tell me why this car consumption on oil is really bad.? Thanks again for this professional video. Kerry Port Orange FL
@biglou321429 күн бұрын
***Warning*** as of 7/24/24 - The weblink in the discription leads to a hacked sight.
@PaulCTownsendАй бұрын
Well done.
@childrey142 ай бұрын
I just used regular plug and play 25k lumins LED H11 bulbs for mine.
@bingbman2 ай бұрын
To the fool who says you buy a new relay...can't do that on a harley..why tell people something you don't know about?????
@DavidChavez-nw4ho2 ай бұрын
Thank you so much sir👏🏼🥸
@mcm954033 ай бұрын
Looks like they went out of business, the website is gone.
@mcm954033 ай бұрын
Very detailed, BUT you don't show the most important thing - before and after night time views of the road so we can see the difference.
@yodo64143 ай бұрын
Get to it..
@CaptainHowdy4204 ай бұрын
This is the exact video i needed. You explained this to a T perfectly. Now I can confidently install the resistor and finally get rid of that annoying hyper flash. Thank you kind sir!
@nathan42334 ай бұрын
Metal to metal and add thermal paste so it can dissipate heat
@babisitalo4 ай бұрын
you are long-winded
@callofbooty75607 ай бұрын
Is there a way to turn my led side markers into turn signals???
@skipwilliam56397 ай бұрын
Great video but All ya had to do is pull on the bottom of the grill and it would have popped right off. Making it easier to get to the two lower bolts
@mudar_h7 ай бұрын
What is the size of the fog light LED ?
@melodicchronic51818 ай бұрын
These work, but the much better, cheaper and safer way to fix this situation is to just buy a new Turn Signal Relay that is rated for LED bulbs. Literally, that's it. You don't have to buy a resistor for every bulb, and install all of them, just pull out the old relay and plug in the new one. I drive a 1992 Toyota Pickup and replaced every single light to an LED, and had to either buy a bunch of these things, or just one LED relay.
@JonFox194526 күн бұрын
I tried that, but couldn't find one specific to my 2004 1.8s Nissan sentra. I bought a generic one, and the blinkers work but only when the headlights are off. As soon as I turn on the headlights, the blinkers stay ON. But I can sort of get the blinkers to work my manually switching the blinker on and off. Any ideas ???
@TomR-GentlmnFarmer8 ай бұрын
Really nice thorough video, thx vm !
@candicec54699 ай бұрын
Omg, I needed help figuring out how to change my bulb that blew. The first 3mins saved me! Very detailed. Thank You!!
@dyardyar72159 ай бұрын
🌹🌹
@Where2bub9 ай бұрын
the product looks good, but I tried finding your website and it looks very sketch. are you still in business? URL says it's not secure, and the home page looks very simple with nothing but three links on it, none for HID lighting.
@BlaGGah10 ай бұрын
I wanted to purchase for my 2012 Camry hut site is no longer available. Can I find this on Amazon or something?
@wermart828910 ай бұрын
I want to thank you for this video as i’ve spent 30 min figuring out why my fogs is not working after replacing bulb and checking fuse box and wiring but this video reminded me to check polarity of the bulb, it works 😂
@jessierodriguez75911 ай бұрын
How did you made the DRLS Walk or chase each other?
@acetvr611 ай бұрын
Does the 2017 Camry use different LEDs for low and high beams? will these be error free?
@Enlightautomotive11 ай бұрын
H11 for low beams an 9005 for high beams
@KelikakuCoutin11 ай бұрын
Free Tibet. Free Hong Kong. Recognize Taiwan. Thanks for the content. Keep up the good work. בס'ד
@dlmanolo43711 ай бұрын
is it ok to keep led lights hyper flashing…??
@snapperproman21370 Жыл бұрын
does this get rid of the black line that projects in dim?
@lucidfry1332 Жыл бұрын
*how to make a light install more complicated than it is
@joetterolison4093 Жыл бұрын
I had the other style and the resistor got so hot I'm going back to stock Bulbs for 2007 Dodge Ram 1500
@Mindmybusiness2023 Жыл бұрын
Well done
@Noq92 Жыл бұрын
You don’t have to pull it all off actually. Just follow instructions till 3:00 and you should be able to reach under it. It’s a little cramped but it works. I recommend this for everybody. Sound is splendid afterwards. Can’t believe I drove for almost 12 months with active sound
@hakimdurand8427 Жыл бұрын
Im guessing... I can use T-Taps also
@HO-24 Жыл бұрын
Hi, I have installed HID on my Lexus CT200h. When I start the engine, (with the option "automatic headlights") the left side turns on, but the right side doesn't. I need to turn off and to turn on the headlights manually and in this case the 2 sides start successfully. Any idea? My ballasts are without Canbus. Thanks a lot..
@vfxnessegod3785 Жыл бұрын
Just bought a 18 optima and can’t find custom headlights anywhere
@eurothrasher2823 Жыл бұрын
If you cut the wheels all the way to one side, turn to right for left side and fully left for the right side it will afford you a bit more wiggle room to get in there….
@adenramirez870 Жыл бұрын
Your a live saver man thank you! I went and picked up a multimeter and the resisters tonight to fix the issue on my jeep. I had known putting LED in where halgonens were stock it would trick the car but I didn’t know I needed a resistor. Anyway, thank you!
@producerghost142 Жыл бұрын
If lead bulb dies would i get an error to know it?
@original_silverdee Жыл бұрын
I have the same setup with the harness but after awhile they would shut off and turn back on, other times they’ll just shut off and won’t turn on unless I start up the car again, I’ve tried everything, using different ballasts and decoders and still have the same problem, my car is a 2015 Dodge Charger Pursuit, don’t know if that makes a difference.
@neildewitt2869 Жыл бұрын
Your pretty warm is over 400 degrees. I checked last night. So don't have the resistor touching anything.
@khmaiesbousselmi912 Жыл бұрын
Quand je mets les résistances dans les phares, est-ce que la température du moteur les affecte ?
@barrygoldwasser5449 Жыл бұрын
So, several things about this video that need addressing. First, the LED you installed has a very poor design and construction. Plastic base. Horrendous heat dissipation. It should aluminum. Cheap, poor design. Second, proper placement of the LED in the socket assures a correct beam pattern. You just put it in there without placing it the right way. The beam pattern is most likely wrong. Lastly, you don't need a resistor cable, Kias are not that sensitive and it won't give you a fault. I can't emphasize enough that unless you position the bulb properly, especially on a projector lens, the beam pattern won't be right and the illumination will be distorted. Aside from that, that LED bulb looks like it came out of a Cracker Jack box. Get a professional lighting expert to properly do an LED upgrade/retrofit.
@truthtruth9745 Жыл бұрын
These are only for turn signals? What about daytime lights and built in demon eyes?
@tonysu8860 Жыл бұрын
FYI I feel if you only intend to replace one bulb or maybe 2 on the same side, going in through the wheel well is the better approach. But, if you intend to replace bulbs on both sides and multiple bulbs, I recommend considering the procedure recommended in the Altima mechanic's manual... Which is to remove the front bumper which allows you to then unbolt and remove the headlight assemblies. Note that Nissan construction of the front part of the car is very flimsy, so if you do this you may find that due to previous collisions that reassembling might be an adventure if a lot of panel attachments have been deformed and might need some pulling and pushing back into position. In any case on my 2015 Altima, I only needed to remove 4 bolts on top and a couple of fasteners in the wheel wells to pull my bumper forward without removing the bolts that secure the bottom of the bumper. With the top of the bumper pulled forward, I had enough room to undo the bolts holding the headlight assemblies and pull them out and once that was possible all the lightbulbs are easy to access... High, low and foglight. For anyone who is changing their low beam headlights because they're dim though, don't do anything until you read the comment I posted about the Suarez vs Nissan Northamerica class action lawsuit that was settled in 2021. Although the settlement in this case outrageously won't fix the factory defect after Oct 2022, you should know about this and maybe report this to NHTSA so that maybe a proper recall would be issued. If you can't find my post immediately for this video about this, maybe scroll all or most of the comments and do a search for my name and maybe "like" the comment so that others might have an easier time finding the comment which is very important for anyone with dim headlights and owns a Nissan Altima.
@danieldavis6090 Жыл бұрын
As long as you get a high quality LED you shouldn’t have any issues with them overheating for anyone wondering
@pixie5293 Жыл бұрын
How long Does it typically take to do the install.?
@richardfabrizio8998 Жыл бұрын
An amazingly informative demo. Thanks so much
@nellylug-cay3482 Жыл бұрын
Graaaacias!!!!
@MountainsArePretty1234 Жыл бұрын
My fog light is out in my 2016 nissan altima. Put a new one in and still isn't working. Smh.