DIY 6.4 Powerstroke Oil Change Quicker Than The Pros

[@TheFedUPdriver]

How can anyone give this video a thumbs down? It was very informative and to the point. Clearly the best video on KZbin for this exact job. Thanks bud! Thumbs up!

[@LightGesture]

Might be because he says 2.5 gallons, but everywhere I've seen says 15 quarts. Which is 3 gallons and 1 quart. My local car quest said 13.......

[@americanenclosures]

Haters will say it's fake

[@sgt4204]

@@LightGesture I’ll un fuck you real quick. 2.5 gallon container is what he poured. Is in the heave diesel sometime buy them in the 2.5 gallon bottles because we are adding gallons not quarts to engines. He was simply pouring the one 2.5 gallon jug he had. Let’s hit some math real quick 2.5 gallons is 10 quarts. Plus his one gallon jug we now have 14 quarts and he added one more single quart we are smack dab at 15 quarts. Don’t thumbs down a video because you are confused haha obviously I’m bored and have time to write this shit hahaha

[@ThomWalbranA1]

@@LightGesture Learn to count and listen, he pour 1/2 quart in the filter, the other half in the engine, then the large 2.5 gal and finally the smaller 1 gal that's 3.5 gal plus a quart. = 15 quarts

[@guthrie1960]

@@ThomWalbranA1 Thom help the children understand... half a qt. in filter... half qt. in engine...1 quart 2.5 gal in engine. 10 quarts 1 gal in engine...= 4 quart Now my Jethro Bodine school of ciphering says that's 15qts.

[@michaeldanner5543]

Thanks, my man! Done a million oil changes but never on a 6.4 powerstroke and it's uncle's truck so a quick review with your tips takes the nerves out of doing it for a critical audience.

[@kevinoneill41]

I always drain the water separator at the same time. You will find it underneath the driver's side between the frame possible right on the frame inline with the drivers door just open the valve. I use a small glass jar to see the water separate from the fuel

[@youngseanconnery8577]

thanks for the vid first and foremost, but you have to check out the FoMoCo guidance on CK-4 oils in Powerstroke motors...you're not supposed to use it. CJ-4 or the Motorcraft oil only. Look for the bulletin that came out in 2016 when CK-4 hit the market. It doesn't lube your motor worth a DAMN, and voids warranty, etc.

[@smeltelf]

Very 1st step is to remove the oil filter let it drain, then drop the oil.

[@DieselMike]

Is that Delo stuff Dino or Synthetic? First PSD guy I've ever seen use that. I change mine every 5k miles with Rotella T6 Fully Syn. I was using the 15W-40 for some time. But then they came out with a 5W-40 (Both T6). So I switched past few oil changes to the 5W-40. I think both are equally superior oils. (Both CK-4 rated now). 5W better for colder starts than the 15W. I'm in Jersey, so it doesn't really get brutally cold. But I noticed the past few years that big box stores in my area are readily carrying the 5w-40 rather than the 15w-40. I dunno. Since the truck was 50k miles young (at 100k now), I have sent samples out to Blackstone for analysis. Whether I was using the 15 or now the 5, I get equally outstanding reports. ......And FYI for the guy below who commented on CK-4 vs CJ-4 (which is what Ford spec'd "at the time"). CK-4 has since superseded the CJ-4 rating by API. In other words, you are going BEYOND Ford's recommendation with a CK-4 oil. www.api.org/news-policy-and-issues/news/2016/11/18/new-api-certified-diesel-engine-oils-are

[@johnallen3581]

Damn good footage quality! 4K GoPro? Awesome info and instruction vid. I subbed 👍🏼

[@TaylorSmithAutomotiveChannel]

Yes sir! GoPro Hero 6. Thank you!

[@reginabrown2996]

Great video! I just finished my oil change and thank you ❤️

[@TheBuddboo]

Thank u I could not fined oil filter. Have not change oil myself always had it done but gotten to expensive.

[@Gator805]

I also have a 6.4 and have always done my own oil changes. I get it done faster and cheaper AND I don't try to sell myself a filter that I dont need. I also moved from California to Illinois so I'm going to 10-40 for the winter.

[@natanavraham6020]

Thanks for the detailed information

[@brandonrichards4880]

You should always let your engine sit for 15 to 20 mins after running so all the oil can settle to the bottom and you can make an accurate measurement. 😉

[@hikerJohn]

Unscrew the oil filter ahead of time and let it drain while the engine drains and then you wont drip very much. I let mine drip for an hour but that works against the "Quicker Than The Pros" theme. If you do it at home there's no reason to hurry. You still have to transfer all the oil into the empty containers and take it someplace so the job is not done till that's done. Those one gallon water bottles from Costco thread in perfectly so cutting them make the best WIDE funnels.

[@Kirsch6.7]

Found a 6.4 for a great price! Guy told me the water pump replaced and drain and fill on coolant, both fuel filters replaced and the fuel water separator bowl took apart cleaned, and reinstalled. The truck is all stock and has 248k miles. The truck is nice except for a ding here and a scratch there and a hole in the driver's seat. It's a lariat to. Really uncertain. Any advice

[@stacyrethman9532]

adding oil to the filter housing will do nothing.... The first thing u do when u start your oil change is loosen the oil filter cap all the way.... When u do this it opens a drain back valve and allows the oil thats in the housing to go back to the pan, pouring oil in the housing before putting the filter back in only goes right to the pan..

[@antonioamado7813]

Nice video 👏, thank you

[@johnbolt665]

What genius designed the tranny pan and didn't put the drain on the bottom?

[@christofferlunoe1305]

I assume the engine is hot right ?...You know so the oil will come out faster...?

[@TaylorSmithAutomotiveChannel]

Yes, I drove it to the store to grab the oil and filter to get it up to temperature.

[@masontarbush2156]

do you have a trans fluid/filter change video!

[@happysawfish]

Is the installation of a new 'core adapter' white maltese cross looking piece in the oil filter important each time? I have not a video explaining that.

[@TheNinjaWarriorDuck]

How did you get the Mini Maxx to come on from the key? I tried following the instructions for a keyed power source for mine, but no matter what, it wouldnt come on with the key. Have to manually turn it on

[@davidyoung1600]

Hi Taylor, did you ever switch to synthetic? If so, when and at how many miles?

[@mickeybinas]

This the second video I watched that someone said 36 mm for the filter I just used a 35 cuz the 36 was too big

[@jobusher9981]

You ever have any high idle issues with the 6.4?I'm bypassed with mini max..drives fine..idle is very high in park and sometimes revs out and I have to kill the engine...

[@reynobenavides3513]

What size socket did you use to remove the filter cover?

[@DAD-wv4ci]

My owner’s manual says 15 quarts that’s 3 -1/2 gallons not 2-1/2 .... Or am I reading it wrong ????

[@TaylorSmithAutomotiveChannel]

8541DAD 14 quarts is 3.5 gallons, that is why I had the one individual quart totaling 15 quarts between all 3 containers in this video.

[@mattstanley2439]

Have you done a fuel filter video? Getting ready to do my first one.

[@TaylorSmithAutomotiveChannel]

I haven't made a fuel filter video yet but am going to very soon. I'm due for filters soon as well.

[@matsmith16]

Thank you

[@thebillymartin1]

Awesome vid thx.

[@420HughMungus]

Do you run your truck before the oil change to heat the oil ???

[@TaylorSmithAutomotiveChannel]

Ray Potrykus Yes I do

[@Sasquatchmedic]

uhm what? That is one foolish question.

[@DAD-wv4ci]

Troll ???? Get a life, this comment was from 2 years ago and was already answered Hahahahaha

[@ethanszymanski7959]

Thank you sir

[@robertjackson9601]

Taylor, no archoil 9100?

[@vidalalfaro9643]

Taylor I just bought a 2010 6.4 Harley davidson I only drive it on the weekends have i put under 3K miles in 1 year do you think i can get away with doing the oil and fuel filters every 9 months?

[@TaylorSmithAutomotiveChannel]

Yes you should be fine!

[@nathanharrison816]

Why are we racing to get it done fast?

[@richarddominguez9301]

Run the truck for a while on a cold day and that oil will fly out. I have the same year (king ranch f350)

[@hikerJohn]

You said 15 quarts but why does it look like you only have 6-7 quarts there?

[@HappyTimes024]

It takes 14.2, 3.55 gallons of oil = 14.2 quartz

[@LightGesture]

As far as i saw, he only did 2.5 gallons?

[@The_Viking51]

Is your rear main seal leaking?

[@jeffizdabomb]

Salty Waders LTD It is for me on my f250 08

[@jesse1441]

Jeff Badini I think mine is too, do you get a couple drips of black oil when you park?

[@nicktoutant4411]

Hey man I saw you have the H&S tuner. Where can I find the tunes for this unit. It came with my truck but no tunes loaded and because of that I can’t change my tire size to adjust speedometer or anything. Any help would be awesome!

[@Sasquatchmedic]

You have to send unit into minimax for new vehicle programming. The tuner only is good on one VIN vehicle.

[@nicktoutant4411]

@@Sasquatchmedic the tuner is matched to the VIN of my truck it just says contact customer support for updated tunes. I can’t seem to figure out how to contact them for the updated files. I really want to change my speedometer calibration to match the tire change and transmission tunes are a must. Thanks for reply me additional info would be beyond appreciated!

[@Sasquatchmedic]

@@nicktoutant4411 Let me check on this, I think I have the contact info, If I remember, Bulldog now supplies mini maxx programmers, if matched to vin, and it does not communicate, could be bricked/locked, I’ll get back ASAP!

[@nicktoutant4411]

@@Sasquatchmedic man thanks so much!

[@nicktoutant4411]

@jason Miller hey did you have any luck?

[@Pairofdice]

25 degrees that’s hot

[@sumporfuk]

Uh, I think he’s talking Fahrenheit not Celcieus

[@MedinaChuckie]

You will get a ticket if a cop sees you blocking a sidewalk like that.

[@sherlockhomesky]

I get that little oil light briefly all the time on my 6.4. I use all motorcraft filters with 15 qts at oil change....not sure why it does that.

[@TaylorSmithAutomotiveChannel]

sherlockhomesky make sure you have the correct oil cap. The first time I changed the oil on this truck it had an aftermarket filter and cap and I installed the Motorcraft filter with the aftermarket cap and the light came on every time I started it. It's very hard to tell the difference, but the cap is the problem for sure. You can pick up a Motorcraft cap on eBay for about $17 I think.

[@sherlockhomesky]

@@TaylorSmithAutomotiveChannelI never thought of that, bought the truck used so there is good chance it has the wrong cap. I appreciate the response! Did you ever get around to moving the ebp sensor after your egr delete? I have deleted mine through a tuner but still have the hardware installed and I'm dreading the task

[@TaylorSmithAutomotiveChannel]

sherlockhomesky Definitely give the oil cap a try. I haven't gotten around to moving the EBP sensor yet. I've been so busy that I keep telling myself I don't have time to do it, but I really need to. The truck is fine as of right now though. I am going to make a 1 year update video soon about the egr delete and will be answering some questions I have received about it in the video.

[@teamdada2194]

What the hell dude. You said 6.4 powerstroke. Cmon man

[@thomasexeter97]

🤦🏼‍♂️ don’t use junk oil, you’re just constantly damaging your engine

[@opengchris18]

grab yourself a fumoto valve, shave minutes off the task. thank me later.

[@christofferlunoe1305]

Yes,..nothing faster than that..!