DIY Aircraft Propeller Project

[@squiremc]

Try drilling the boss and bolting it to a block of hardwood to hold in the vise. Those blades are delicate and an overpressure can result in damage to the grain you might not be aware of. Excellent work!

[@souharmhammed766]

Have a good day, hello, you are amazing, you are wonderful, you are a creative artist. I ask you for more creativity. Show us other works and creativity. I wish you good luck and lasting success.❤❤❤👍👍👍

[@jeevanandham2528]

Amazing.. Excellent workmanship..Thanks for sharing your valuable knowledge..

[@oktayunlu420]

nice workmanship...which wood did you make it from?

[@patriciasoares9204]

Que incrível! Parabéns pelo seu talento e dedicação. Eu vou fazer uma hélice também. Gratidão 🤗🌟🎉💖.

[@samanthavailoces6598]

Ganda boss.. Papagawa ako sayo boss pag uwi ko ha... Thanks

[@LeonardoCostaUSA]

Work of art, awesome!!

[@guliyevshahriyar]

Very nice work, thank you very much!

[@petter2263]

Very nice propellers

[@Superguru123]

SIr, Your manual sketching measuring , cuttinng , fishining all fine well planned . but this need all those tools to make at home we dont get it. what type wood its any name for that texture?

[@leopoldbocardiouf9514]

Très bien fait

[@ВикторШувалов-ю5с]

Молодец руки на месте и с головой дружат.яб купил

[@vijayakumarT.]

Thanks for sharing informative video

[@erwinavenido7945]

Thanks for watching

[@sarika298]

Difficult!! On what basis your pensil was marking lines i couldn't understand

[@EJ-74]

NIIIICE 👌

[@pilotthalles9682]

Perfect 👌🏻👏🏻👏🏻👏🏻

[@jackplover3380]

What’s the measurements for the plane wing ?

[@tuuljargal2629]

Very nice...

[@saidagoujil2625]

Good work

[@agckahuna1]

Tremendous work Erwin. Can I commission a propeller from you? I'll provide the stock.

[@harukamusic4544]

Thnk good job

[@ytehrani8495]

Beautiful.

[@ericbermaltiansay1783]

nice keep it up

[@willarddevoe5893]

I carved apple O20 Cox props. They didn't come out as nice as yours. Now I have an O 200A, and a 73 inch propeller is supposed to be laminated. You can't carve a stack of them in a weekend. At least it won't be free flight. It should last longer. Culver makes biggie props. Take a bow.

[@serchris29]

galing sir :) tsaga mong nag liha :D

[@erwinavenido7945]

3 days yan hahaha

[@serchris29]

@@erwinavenido7945 lambat dana AHAHAHA pero sulit maganda :) bilhin ko sir pang display :D

[@erwinavenido7945]

@@serchris29 ahaha.. ayaw.. pang demo ko to,, gawa ka nlng haha sensenich design ito

[@reythecyclist8629]

@@erwinavenido7945 sir pagawa nalang kami hahahh wlang mga tools equipments kami

[@erwinavenido7945]

@@reythecyclist8629 cge basta tama pag kagawa

[@karyachannel794]

Terimakasih ilmunya, salam sukses.

[@ytehrani3885]

Very beautiful job. It would be nice if maybe each quadrant was coloured , or had floating reference points edited in as an overlay, so left / right, upper / lower, LE / TE distinctions were more easily understood. It got to be a bit of a blur initially. Think I will have to buy Peck props for now. I don't have a spatial brain. Oh well.

[@CatherineDjaldouda]

Excellent travail mon professeur, j'ai beaucoup d'intérêt à vous suivre pour plus de connaissances dans l'aéronautique. J'aimerais votre WhatsApp s'il vous plaît merci.

[@claudiofonsecaa1492]

Faz uma hélice para mim coloca meu avião

[@drfaizulhassan2319]

Elaborate from which prospective it will roate either clockwise or anti clockwise ?

[@windowsxseven]

No.

[@willarddevoe5893]

Common leftie. Pusher or tractor.

[@celsosantossilva8855]

Amigo parabéns eu quero tentar faser uma 16x8 vc não poderia por favor manda um projeto dela em pdf para a gente tentar faser obrigado

[@hengkihermawan6215]

Lokasi anda tinggal dimana bro,,,???

[@drfaizulhassan2319]

Will it rotate clockwise or counterclock wise plz tell ??

[@erwinavenido7945]

Any sir, It doesn't matter as long as you pivot the middle part.

[@erwinavenido7945]

But if your done already, the propeller face should be facing you and the rotation is counterclockwise towards the leading edge. Feel free to ask sir

[@jeremijerem912]

Monobloc ?? Pourquoi ne pas avoir prit de lamellé-collé ??

[@hadjnabil4811]

thank you lot's

[@kokolediri583]

Comment faire le dimensionnement l'hélice

[@user-Seyawsh]

nice

[@user-wo8id5jb9n]

That's very hard. ㅠㅡㅠ

[@electrotechcr2510]

Nice

[@sewwandiudayanganai1484]

Good

[@amalhicham8590]

Bonjour Mr svp les mesures en mettre

[@mind-boggling4187]

What type of wood you are using ?

[@erwinavenido7945]

For instructional purposes only and easy working I used palochina wood... Thanks for watching

[@bertoseverinodasilvaseveri7624]

Ande encontro no a ele de avião par compra ok

[@rozy4698]

Maiden flight... Crash and propeller broke... ITS hurt

[@rjdankert]

WARNING: the audio may not be suitable for all audiences.

[@joyjoypanes190]

Sir ilan yung kapal ng hub assembly sa side sir?

[@erwinavenido7945]

3/4 to 1 inch..

[@arjunflykitesharma1376]

👍🙏❤️

[@arjunflykitesharma1376]

What is the weight of sir glider? kg

[@arjunflykitesharma1376]

What is the weight of sir glider? kg

[@erwinavenido7945]

@@arjunflykitesharma1376 I don't have any idea about the exact weight of the gliders but all i know is, it should be as light as possible so it can glide perfectly in flight.

[@leonicollelagonera3720]

How to make the pattern?

[@sanxlife3609]

B

[@culllaticiqsu83]

I prefer to build with Woodglut plans.

[@Jm.0922]

aviation course mo no? HAHA

[@samanthavailoces6598]

Boss Ano contact number mo....

[@erwinavenido7945]

for what purpose po sir?

[@samanthavailoces6598]

Papagawa ako NG wooden propeller sayo...

[@averagedude-b7m]

galing