DIY Ant-Man helmet from Quantumania!

[@PropWay]

Want more Marvel and DC prop tutorials? Make sure to subscribe! kzbin.info Check out my PropWay merch here! bit.ly/3PdrHn3 Instagram - instagram.com/propway/ TikTok - www.tiktok.com/@propway Facebook - facebook.com/PropWayCo If you see this comment, reply with your favorite superhero!

[@venom6168]

Spider-man

[@shanixch9196]

Iron Man

[@QwertyZ70]

@Propway can you add the score lines to the templates? Because when I make stuff off of your templates, I need the score lines, and they are not there, so my lines are messy. It would be great if you could add score lines for us to follow! Thanks!

[@antoniosoto5535]

Spider-Man

[@vrishanks.r.3941]

Spider-Man For Life

[@ariellecanlas5794]

The pattern, the seams, the paint job, the lines, SO CLEAN!!! I’m so inspired and I can see how much you’ve grown in your craft!!

[@PropWay]

Thank you so much for noticing the details! I’ve been working hard haha

[@SPIDER-MAN-297]

The helmet looks so clean and accurate to the movies. Great work. It would be really cool to see you make Star Lord's helmet from the Guardians of the Galaxy.

[@PropWay]

Thank you so much!

[@pachuchibachuchi6974]

yes we want to see starlord helmet build pls!!!

[@Michaeltowell3]

Thank you for all these tutorials! You are a very talented guy! Your videos have helped me so much! Great job!

[@PropWay]

Happy to hear that!

[@silbestardungdung4931]

Please do Make KANG THE CONQUEROR Helmet from QUANTUMANIA!!!!😭😭😭😭

[@Spiderguy-rl6uw]

Excellent work! Magnificent! Two questions. 1. How thick was the eva foam for the whole helmet? 2. Are you planning to do Wasp's helmet after this one? If you are, great! If not, no worries. Keep up the great work. Can't wait to see what else you're building for this year!!

[@PropWay]

Thank you! 1. I arbitrarily used a combination of 4mm and 5mm foam, because that's what I had in stock lol. You can use all 4mm, all 5mm, or combination. 2. I just might be working on Wasp soon ;)

[@carlpowers7291]

You do a great job in your tutorials. Thank you

[@dimathrankothdevella1714]

I tried to build this ant man helmet but I am a fail when making helmets. I tried to build every helmet that you have uploaded but every time I fail. I can't build helmets like you. You have done a great job with the ant man helmet it is like jumped out from the movie.

[@PropWay]

It just takes practice Dimath! Thank you for your comment :) good luck with your builds!

[@CavaleiroPretoFosco-nx6ef]

Wooow this is amazing!!! Thanks for tutorial and patterns

[@PropWay]

Thank you so much!!

[@zayed_m_ali879]

This looks like the coolest thing you have made! And now you can say "I don't have to lose , we dontnhave to win" I would also love of you would make a Captain America's helmet lots of love from India

[@PropWay]

Wow thanks!! Haha

[@CT-3105]

Yes!!! I saw your short and the ‘I’ve got a date with the wasp really got me😂 huge fan!

[@PropWay]

Hahah thanks!

[@comedylife8854]

Thank you for the link of template I am very thankful to you

[@atelierartsworld7513]

Muito bom e muito obrigado por disponibilizar os moldes parabéns pelo trabalho é i melhor que vi até agora ❤

[@KennedyWord]

Dopest Engineer I know! Such a intricate model. So goood, Greg!

[@PropWay]

Much love Kennedy 🙏🏼🙏🏼

[@theinsanebrothers342]

Could your next project be hulk buster helmet

[@norriskwan7289]

Awesome work! How do you size your cutouts to ensure it fits proportionally to your head?

[@erickferreira3255]

Great Job! Congratulations from Brazil!!

[@marvelsstopmotion6292]

Amazing work dude i love it definetly i will do it

[@PropWay]

Please do!

[@dkspideyfans7044]

I love Ant-Man because He is Very Funnest Character and I Really love Ant-Man Suit to ❤️🖤❤️🖤

[@propdjpro6377]

Nice job bro that make this Ant-man helmet 😎😎😎😎😎😎🤴🤴🤴🤴

[@guillermobustamanteherrera8289]

on Ant-Man's helmet, it also looks very cool and I would love to do it myself, but with cardboard. 😊🙏

[@chakripeesapati2790]

on Ant-Man's helmet, it also looks very cool and I would love to do it myself, but with cardboard 😊

[@ashleyroberts7654]

Hi there brilliant build im new to making foam helmet. Ill be trying this one. What is the scaling of thid template so can work out the size for me please. Keep up the good work 👍

[@Sm00th89]

Amazing 🔥

[@francispineda9081]

Love all your videos and creations!❤

[@PropWay]

Thank you so much Francis!

[@LuisFeSI]

I've said it before and I keep saying, your work is amazing!

[@PropWay]

much appreciated Luis :)

[@emm5199]

Another amazing tutorial!!! I’m in the process of making this.. and I have a question for the pattern! So for the mouthpiece (the strips for the mouth) there were no patterns for the sizes and such.. what sizes (in inches etc) we’re those?? Thanks!!!

[@christianscre8tions]

This is your coolest project ever! It looks so smooth and acurate.😃

[@PropWay]

Wow, thanks! Glad you like it!

[@christianscre8tions]

@@PropWay no problem.☺

[@FNFCONTENTGAMING]

Hey man thanks for the free downloadable templates it works so well with my ant man cosplay ❤❤❤

[@PropWay]

Awesome glad I could help!

[@HunterTheHero]

The helmet looks so awesome and I love the red accents on the sides! It’s by far my favourite Ant-Man helmet!

[@PropWay]

Totally agree! Thanks!

[@vrishanks.r.3941]

Wow! That’s some neat work!

[@PropWay]

Thanks!

[@rirrian]

You should totally do ronins sword next!!!!

[@danmanalvarez6351]

you make it so easy to make. very impressive as always.

[@PropWay]

Thank you very much! Definitely gets easier with practice!

[@cleytonroberto5634]

Mais um projeto incrível feito por vc ,ficou muito top.

[@PropWay]

Muito brigado :)

[@goatelope7539]

Very cool. Well done

[@atharvanium2044]

Wow it almost look real and easy to make how you make prop with unique techniques please Create tengen uzui blade

[@guillermobustamanteherrera8289]

Hello. congratulations on the iron man mark 85 armor. it looks wonderful and fantastic. you are very witty. 👍👍👍

[@PropWay]

Thank you so much 😀

[@joshuabesorio2343]

Hi Greg, I'm having a bit of a problem with page 7 of your template. The 2 'x edges' don't seem to be fitting together correctly and I'm not quite sure of what bevels I should use on the edges. Would you be able to help? Love how the rest of the helmet is coming together otherwise.

[@tamlinan2323]

All your work is great. Please make Iron Man's arms and gloves too

[@PropWay]

Thanks!!

[@Noothanworld]

Tq bro for templates

[@lalithadebariki4716]

You are like; the luckiest guy 🤘

[@White_Knight_Real]

You should make a Court of Owls Court Member Mask!

[@mandeepgujral578]

Dude! Your amazing!

[@fawazashraff1655]

Best of ever

[@shanixch9196]

I saw this on the Shorts..Bro I really like your creations

[@PropWay]

Thank you so much 😀

[@r1chl_ezz]

Man, you just earned a subscriber 🎉

[@PropWay]

Welcome to my channel! Thank you for the sub 😁🙏🏼

[@r1chl_ezz]

@@PropWay Thanks!

[@KaylaHernandez-o2o]

Good job I love your videos and they are really good keep it up

[@marvelmax8952]

your tutorials are great! good work!! happy New Year🙌🏼🙌🏼🙌🏼🙌🏼

[@PropWay]

Thank you! You too!

[@joshuabesorio2343]

This looks so cool!!! You did really great on the paint job. Can’t way to make one.

[@PropWay]

Thank you Joshua! I've been trying my best to improve on painting, so I'm glad someone noticed! Haha

[@natonline6706]

Hi I'm a rlly big fan and I've just printed your template so I'm going to try and make it with cardboard

[@nadialeiva85]

What do I put inside for it to be comfortable

[@jjnbaca243]

Really cool. I also have a turtial request kangs helmet if you can that would be awesome if not it's all cool

[@jasonscraft3254]

Yoooo that's sooo cool!!😃😃

[@PropWay]

Thanks Jason!

[@aegiph]

Hi Greg, I’m having a really hard time printing out the templates and getting the right size, is it ok if you can measure a part of your helmet so that I could use that as reference? Thank you

[@KevinGrover-n9h]

What size were the strips you used for the mouth piece?

[@devanshmodi1234]

Bro the amount of talent u have and the hard work that you put into your videos I just think that you should have 10 million subs

[@PropWay]

Man, that means so much to me. Thank you thank you thank you

[@王珊珊-q3f]

Marvel should start hire him 3:51 also I think this is not how you are suppose to use it, it kinda dangerous the way it is close to your hands

[@AdventuresofEmceeMonte]

Cool build. This helmet looks clean! I have been subscribed to your channel for a bit and this is the 1st time I heard you reference Chicago. I am from/in Chicago as well. That's what's up

[@PropWay]

I appreciate that! And ayyyy fellow Chicagoan!! haha

[@AdventuresofEmceeMonte]

@@PropWay right! Makes me love supporting your channel even more. Do you go to any cons in Chicago

[@aidenhuber8246]

Love your design. By far the best one out there. How many containers of contact cement did you use?

[@PropWay]

Thank you so much! I have a small 3 fl oz. container and that can build multiple helmets.

[@aidenhuber8246]

@@PropWay thank you

[@carlpowers7291]

How did you learn to make your own templates

[@BoazSchaap]

Plss make Kang helmet next

[@georges_crafts]

Happy new year 🎈

[@drewzy12]

Awesome you should make wasps helmet and cassies helmet

[@PropWay]

I think I just might have to!

[@thisakthikamanodith6862]

Your helmet look like the real one nice work propway.👌 can you make something from WWE?

[@arnavawesomeplayz5956]

Hi, will cardboard be ok instead of foam

[@cliffordbacsarpa3317]

So cool!!!i think you forgot to add the strips into your template but overall it's awesome and Im thankful as always..

[@PropWay]

I did forget to add it 😅 but it’s simple enough to cut strips out without a template

[@pachuchibachuchi6974]

hi there!im from the philippines and newly subscribed to your channel. i love your build, simple to follow and no need for special tools to make.ill try to make one before antman shows on feb 17 for my son's cosplay.more power to your channel.god bless!

[@PropWay]

Thanks for subbing! Good luck with the build! 😁

[@sleepingdragon2936]

So awesome bro!

[@PropWay]

Thanks!!

[@王珊珊-q3f]

Happy new year 🎊

[@gloriabennett5053]

How long should modpodge sit ?

[@poyart13]

I am always trilled dude with your work... Hope I have that talent in making my own templates... By the way I am now doing some of my work and post it on tiktok and soon here on youtube.... POWER TO YOUR CHANNEL...

[@PropWay]

Awesome!!

[@Cheddar_Knight]

Where's the best place to get eva foam?

[@PropWay]

I get it from Hobby Lobby (or any craft store) and also Amazon!

[@zacharydeno9004]

That is so amazing and cool I wish I was as talented as you

[@PropWay]

Thanks Zachary! It just takes practice!

[@zacharydeno9004]

Ok thank you

[@emanguli4945]

After this mask, could you make a Ant-man costume?

[@xotic2778]

Looks amazing! Keep up the good work. I made your iron man helmet and it was awesome!

[@PropWay]

Thank you!! I’m glad you used the iron man template and it worked out!

[@venom6168]

Hola propway queria preguntarte si puedes hacer un casco de chainsaw man ?

[@shrupsoter9279]

You should make Kang the conquers helmet

[@haleytieman3046]

I noticed some of the parts weren't included in the template, that I was a little confused about. The long rectangular pieces on the back of the helmet, the strips that make the beginning of the mouth piece, the details on the actual mouth as well. Maybe I'm just missing that part, but it doesn't show up on the template. ( No hate intended.! I love all your work, I am just a little confused lol )

[@PropWay]

You’re definitely right that not all parts are included (specifically the strips around the mouth and mouth detail) but everything else should be! Figured those were easy enough to freehand. Sorry for the confusion!

[@DebzLife]

Ahhh man i wish i saw this video earlier.. but i was busy building a batarang.. 😭 I wanna make a reel / shorts with the ant man helmet when quantamania comes out.. but sadly i cannot build it in time. My idea was to wear the helmet and ask the movie for three tickets to quantamania.

[@PropWay]

Haha do it!

[@DebzLife]

@@PropWay done. Just need to paint it.

[@jordynwalker9179]

I love all your tutorials, they are so helpful! Can't wait for the next one! Silly question - what size zoom should the templates be printed at?

[@PropWay]

Thank you so much! And it depends on your head size! If you print it at full size (filling the whole sheet without scaling), it should fit an adult head which is about 23”. And you can scale it up or down based on that!

[@jordynwalker9179]

@@PropWay awesome, thank you! 😊

[@vybhavplays951]

Can i use Cardboard instead of Eva Foam??

[@PropWay]

It's a little harder to get the curved surfaces with cardboard, but it can definitely be done! I'd say give it a try

[@VREVIX]

How do you cut the pieces so perfectly 😭

[@PropWay]

Hahah I replace my Xacto blade often! Sharp blades cut the smoothest!

[@VREVIX]

@@PropWay I'm using blades that I've barely even used, im just not good at angling things 🫠

[@gray4109]

I have always wondered, is super glue a good substitute for contact cement? Amazing helmet, keep up the good work😁

[@PropWay]

It's definitely usable! The only reason I don't is because super glue gets hard when it dries, so if you have pieces that need to flex a bit, you'll hear some cracking from the dried glue. Contact cement dries to be more flexible so it can flex while still holding the foam together :)

[@naneihitochhawng8937]

What matireal do you use

[@xotic2778]

What thickness is your foam?

[@PropWay]

4mm and 5mm! I use them interchangeably

[@Pasha12-m3w]

You the Best!!!

[@yuanreyes2220]

I want two

[@thesimon3072]

Can't you make casie lang helmet ?

[@guillermobustamanteherrera8289]

In my case, I would really love it if you made the Iron Patriot helmet from Avengers Endgame, or the War Machine Mark 3 helmet from Captain America Civil War, but that could be opened and closed. But more I want the Iron Patriot helmet from Avengers Endgame. Hope you can make it. Please 🙏🙏

[@PropWay]

Thanks for the idea!

[@guillermobustamanteherrera8289]

Thank you for listening to the idea. it will be wonderful if you could make those helmets 🙏

[@radbuilds3000]

Another great video!

[@PropWay]

Glad you enjoyed it!

[@nadialeiva85]

Make the list of the ingredients

[@shayanedesilva619]

Lesgooo good job man! How on earth r u so good at freehanding?

[@PropWay]

Hahah many many years of being bad at it 😅 but the practice helped!

[@shayanedesilva619]

​@@PropWay :D nice lol

[@DiptenduGuha-ji5bb]

Sir can we take out the template in A4 size paper?

[@felipematheusghomes]

I hope you teach how to make Star-Lord's helmet, for when the third Guardians Of The Galaxy movie arrives

[@ashlyndavis3381]

Hi! I love your builds they are so cool! What’s your favorite of all your builds? Also what would you say is your easiest?

[@PropWay]

Thank you! Good question…my favorite might be one of my Iron Man suits. Easiest would be Moon Knight mask!

[@camgorges7530]

Can you do a clone trooper helmet from Star Wars?

[@PropWay]

I've always wanted to!

[@tf_geeks]

are we getting a suit tutorial 😉

[@Inspiregenius567]

Can i made with carboard

[@PropWay]

Yes!

[@joshuabesorio2343]

Can you make a green/white mighty morphin power ranger helmet?

[@PropWay]

That’s a great idea! I’ve always wanted to make a power ranger helmet

[@masyonazumi]

Subscribed!! Awesome!! Thank you!! Anyway, can you do captain America helmet? You are Amazing

[@PropWay]

Welcome! I absolutely plan to do a cap helmet one day!

[@masyonazumi]

@@PropWay please!!! And Thank you!

[@sathishkuil7457]

Can we print the template with a4 size paper

[@PropWay]

Yes!

[@historias7751]

how thick is the foam

[@PropWay]

I used a combination of 4mm and 5mm foam because that’s what I had in stock. Either one will work fine!