[DIY] Awesome idea for woodworking workshop / Making a folding band saw outfeed / Simple removal

[@dwayneford1990]

I have been watching a lot of your videos and I am so impressed with your DIY solutions to shop problems that you are now officially my favorite maker on KZbin. Your skills combined with the way your mind works is a joy to watch. I have learned so much and I look forward to more videos from you. Thank you!

[@carpentak]

hello. Your nice comments and compliments make me feel good. Thank you. I keep working on great work. See you in a better video.

[@RicE-ru1lq]

CarpenTAK, I watched your video for the "Folding Outfeed Bandsaw Table". I had just purchased my Grizzly GO555LX bandsaw, and was inspired to adapt your build to my saw. It took me some time to research and find the same components you used, and it came out great, I purchased the saw specifically to build our bedroom suite, (dresser, hi-boy, nightstands and headboard). The legs will run full height and have long concave radius' on two sides, which was the reason for purchasing the bandsaw. Your folding outfeed table is perfect in functionality, and fols away for storage . . . perfect!!! I also liked the modifications you made to the tablesaw fence. I have a 52" Beismeyer fence. Using your inspiration, I added the feed support to my fence, which helps support longer infeed stock and makes handling alot easier. I am now looking for all the components for your "All In One Tablesaw Sled", which is my next project. Thank you again . . . and again for your inspirational and useful projects.

[@carpentak]

Thank you for your nice comment. I'm glad my video was helpful to you. Also, thank you very much for becoming a channel member.

[@RicE-ru1lq]

Thank you for your response. I was hoping that by becoming a channel member, I would get a little more information regarding the various projects, (access to some dimensions, sources for the components, etc.. I also thought I would be able to share with you some pictures of my build of your concept. But, I can’t find any way to upload pictures to send you. Some basic measurements/dimensions would really help with the “All in One Tablesaw Sled”. I can figure out the little stuff, but the basic overall dimensions, and the location of the T-Slots would really help. Thanks again, Ric E

[@carpentak]

@RicE-ru1lq Ah, I see. Then check out my channel member community. I have revealed an email address for members only.

[@drabusharr]

Wonderful and creative build. Excellent work flow and design

[@vicweast]

This is a great project! Beautiful problem solving and result!

[@newworldcarpentry]

Man you have inspired my next shop builds I'm a small maker on youtube and I thought some of my ideas were innovative but wow

Merhaba arkadaşım, Büyük deneyimleri gizleyen proje ve akıllı çalışma şekli için tebrikler. görüşmek üzere. Büyük selamlar.

[@williambarrigaz8862]

Lástima que a los 70 años me di cuenta que la Carpintería era la profesión más linda de la vida . Amigo

[@carpentak]

bueno. Agradezco darme cuenta a los 30 años. Así que estoy feliz de estar trabajando ahora y gracias de nuevo por poder mostrártelo así. Por lo tanto, manténgase saludable y continúe prestando atención a mis videos.

[@StuffIMade]

great video, thanks!

[@brigitteprovost4306]

Excellent ce système quand on travaille avec des longues planches, ça évite la déstabilisation et donc les risques d'accidents! Bravo 👍👏

[@Patrick76150]

Bonjour, Une excellente idée et un plus pour la sécurité ! J'aime ce travail bien fait et avec soins ! Félicitations ! De cordiales civilités de France Patrick

[@Gringo8427]

cool Idea.... i make one of these for my Bandsaw Sabre 350... NICE !!!!

[@michaelisaac4718]

Amazing Craftsmanship...

[@bernardmcmahon7434]

Great add-on's. Thanks for sharing.

[@sickwilly1171]

I will be doing this. You are a fine craftsman and genius. 👍

[@jean-lucmarquette4503]

Ce plateau repliable est une excellente idée et sa réalisation est bien sûr très qualitative comme d'habitude ! Bravo ;-))

[@KodyKimani]

What a beautiful job you did on those

[@woodanet4181]

Excellent. I watch a lot of your videos. Well done! Great! All ideas are worthy of likes!

[@gregarrell6132]

I like your work. Practical and precise.

[@claudej55]

Comme toujours Bravo, vous avez des idées géniales dans toutes vos présentations.

[@김종일-q3i]

가구기능 뿐 아니라..왠지 건축목공 전공이신듯 하네요..매편이 예술입니다. 많은 해외 구독자가 곧 사랑할듯합니다

[@carpentak]

네 감사합니다. 제 채널은 해외 구독자 분들이 95%정도 인듯 합니다. 그런데 최근에 우리 한국분들도 봐주시는 분들이 많이 늘고 있네요. 더 멋진 아이디어와 영상을 보여드리기 위해 저는 열심히 머리를 굴리고 있습니다.

[@fngrusty42]

Wonderful. Changing my permanent shelves on my bandsaw this week. Just ordered the brackets. Thanks

[@steveferguson1232]

Great solution for bandsaw. Awesome job

[@gravili]

Good video, good idea!

[@robertj1701]

It would be nice to extend the infeed side to match out feed…

[@douglashaner6802]

Nice, I have an older Craftsman Bandsaw. Nice enough, but the work table is too small.

[@bijan4727]

Hi I have seen many of your amazing woodworking masterpieces. I like the way you have made an extension for your table saw, is it possible to make a video showing how you have made it. Specifically the extensions to the right and left of the blade. Is your table saw a Dewalt?

[@jaykepley5238]

Nicely done!

[@robertoferreirademello2432]

Seus projetos são incríveis. Parabéns pelo trabalho. Ótimas dicas. Muito show. Uma boa noite. Ótimo final de semana. Abraços brother. Falando de São Paulo Brasil 🇧🇷🇧🇷🇧🇷🇧🇷👏👏👏🤘👊🏍🏍

[@keupondestroy911]

Merci beaucoup pour la vidéo

[@woodymartl]

Hello i'm Martin from Bavaria, that's so amazing and a great job you've done, a very great job. 🍀🍀🍀🍀👍👍👍👍🇩🇪🇩🇪🇩🇪🇩🇪

[@joedance14]

Very nice work, good solid design!

[@NRMGUY]

Just the solution I was looking for! What are the gold ball and socket connecters (shown at 10:30 on the timeline), used to secure the position of base box assemblies, called?

[@carpentak]

It's a furniture accessory. I don't know the exact name.

[@erichputtmann5814]

Super❤❤❤

[@michaelfelixb1316]

Perfekt, wann kommen Sie bei mir vorbei um die Verlängerung zu bauen 🤣👍👏🤗

[@claudebattonnier8340]

C'est génial la on a un meilleur maintien 👍👍

[@RAMONBAEZ-s2e]

Exelente

[@Sigmadog1975]

Greetings. Great work. I was searched unsuccessfully for the locating pins you used (10:31). Here in America, one can usually depend upon McMaster Carr to inventory products like that & they did have some that were expensive. If possible, please advise as where you believe they may be found. Thanks.

[@carpentak]

I don't have a link of it. I searched for you, but I couldn't find it either. This is a brass pin that holds the level difference when connecting tables. sorry for not being able to help

[@Sigmadog1975]

@@carpentak Thanks

[@3weight]

Beautiful! By the way, I’d love to know how you built that dado saw setup shown at abou 6:40. Did you pull just the trunion/motor/arbor from a table saw and mount it to the underside of the bench? Or build your own? How do you access the raise/lower control? I hope you’ll do a video just showing how it works!

[@carpentak]

Okay. I'll make a short video when I have time.

[@3weight]

@@carpentak Wow, fantastic, thanks! I’m pretty excited by the idea of keeping a dado stack ready without taking up space with a whole second table saw. I’ll be doing a few projects based on your vids. I have the same bandsaw so the details on outfeed attachment are especially great for me 😃

[@BostLabs]

Awesome!

[@kenpoist7]

Well done! Do you have a list of the mechanical parts that you used?

[@carpentak]

I bought them here in Korea. So I can't provide links or lists. Sorry

[@michaelbaykara2322]

Very good Sensei

[@suhyunpark3898]

영상 잘보구 있어요~ 좋은 아이디어 존경스럽네요~ 다름이 아니라 밴드쏘는 어디껀가요??

[@suhyunpark3898]

LAGUNA LT 14/12 이거네요.~~ 위에 코멘트가 있었네요~

[@carpentak]

네 맞습니다. 댓글 감사드리며 즐거운 목공생활 하세요~

[@IraFuse_422]

Okay! 👌👍

[@tilfordstiteler7250]

Hello, In one of your videos you hooked up a blower to your compressor and it had a magnetic base with a flow control valve with a green flexible hose and a flared fitting on the end. Could you possibly list the fittings that you used to make this ingenious blower. Thank you

[@carpentak]

hello. The one you mentioned is originally a tool for injecting grease, not for blowing air. That's how I used it. I bought this here in Korea so there is no link. The flexible nozzle and magnetic valve were purchased separately and assembled.

[@희망-m7u]

정말로 잘 봤습니다. 좋은 아이디어를 계속 부탁합니다.

[@davidburns7006]

Hi , what model is your dewalt tabe saw

[@carpentak]

DWE7492

[@Disc_Moto]

1:34에 나오는 홀 마킹하는 저 툴은 이름이 뭔가요??? 작업 하시는거 보다가 궁금해서 문의 드려보아요

[@carpentak]

네 도웰 포인터 라고 합니다. 저는 8mm 사용 했구요. 다양한 싸이즈가 있어서 유용하게 사용 가능합니다.

[@mukmusicdiary]

My golly~! What is that side drill adapter thingy-ma-bobby? I NEED IT! :D

[@carpentak]

a.co/d/8UqlYSp right??

[@steviebye1]

hi. what blade is in the table saw please

[@carpentak]

The saw blade I used for grooving is an 8mm thick grooving saw blade. This is a product of a local company here in Korea. They do not sell overseas.

[@mj6user488]

안녕하세요~ 밴드쏘 보조정반 기가막히게 제작하셨네요 항상 잘보고있습니다. 혹시 샌딩할때 매트가 어떤 제품인지 알 수 있을까요?

[@carpentak]

네 감사합니다. 제가 매트 구입한 링크 입니다. www.winextool.co.kr/m/product.html?branduid=838283&NaPm=ct%3Dl4vxquw1%7Cci%3Dcheckout%7Ctr%3Dppc%7Ctrx%3D%7Chk%3Df2c775a64d6cd48e6cb0eb5282ccab3211baa72e

[@mj6user488]

@@carpentak 미끄럼방지매트 찾아봐도 못찾겠던데 정말 감사드립니다

[@stefanfranke6277]

welche Bandsäge ist das

[@carpentak]

Laguna LT14-12

[@fortunido]

Скажите пожалуйста модель пилы?

[@carpentak]

Laguna 14"

[@rodolfogilvanfantim2822]

gostei tambem ,,,, parabens mais uma pra maquina kkkkkkkkkkkkkk

[@kiemho4087]

Bạn là số 1

[@babanabdulwahab]

mantaps dong..

[@clayperspolisservice8994]

👌👌👌👌

[@mobareini4572]

Fancy

[@AndyRink]

🤩🤩🤩

[@Migman2020]

whats the point in using a square to check if it is square and then not bothering to fix it when its not.. waste of time lol

[@RicE-ru1lq]

Carpen TAK, I tried to send you an email to your members only email address. It was rejected by your server. I copied and pasted the address directly from your members only site. Please let me know how and when this will be resolved. Thank you, Ric

[@carpentak]

Oh, I'm sorry. I have corrected my email address. Please return to the community and try again.

[@JohnTheHandymanUK]

I like your videos BUT PLEASE STOP patting the wood with your hand. It is so irritating and unnecessary. Thank you.

[@ДартВейдер-з4э]

🤝👌👍😎