DIY: Black & Decker Mouse - detail sander

A review of this great little sander which costs under £20.00 (Amazon Dec 15). Excellent DIY tool.
Great for sanding all sorts of timber, paint, varnish and rust removal. Also, cleans glass. Easy to grip with a convenient shape.
Buy one!

[@conradr4945]

Those diamond shapes you say to cut off, have a purpose. Because the tip of the mouse gets more use, it wears away more quickly than the rest of the sandpaper. When the tip of the mouse is worn, cut out the diamond shape and use one of those you cut off. Essentially giving you 3 bites of the cherry.

[@thomasboomer9809]

I bought one and I love it. Best little sander for those tight places. Anyone who works on their home should get one because it is so useful and very inexpensive.

[@21stcenturycaveman33]

Couldn't agree more! ATB, Des

[@emeraldalba]

Been bored being a new pensioner so got myself a new hobby and needed a wee sander so watched a lot of YT videos and came across yours. End result...my new mouse arrived today! Thanks for the informative vid that recommended "The wee moose"! Gotta go, got some sanding to do....

[@21stcenturycaveman33]

What a wonderful story. Hope it exceeds your expectation my friend. Best wishes to you and yours. Des

[@thebrightsideofthemoon5829]

Got a moose loose aboot yer hoose 🐭

[@anyat686]

Thank you. Exactly what I needed to know. I don’t know why anyone would have the cheek to give you a thumbs down. Well done. Every single thing was explained extremely well.

[@21stcenturycaveman33]

You're most welcome! I appreciate your kind words. Des

[@711honved]

I've used one for a couple of years now & it's a great little tool for small sanding jobs. The sander can blow out some serious amounts of dust so buy one with a dust extraction kit.

[@21stcenturycaveman33]

Thank you. It may also be possible to rig up some hose to your vacuum cleaner or adapt to suit. ATB, Des

[@emilymalcolm87]

I have wanted one of these for a while after reading loads of positive reviews. Purchased mine today. This video was very useful as I didn't find the instructions to be great. Happy sanding : )

[@21stcenturycaveman33]

Great stuff. You won't be disappointed. One of the most useful tools I have purchased. Have a great weekend. ATB, Des

[@mariegardiner7034]

You have a lovely voice and demeanour. Thanks for this video. I am looking at buying one and you sold me :)

[@21stcenturycaveman33]

Thanks so much. Very kin d of you to say so. ATB, Des

[@markharris5771]

I don’t know how long I've had mine, but I know it’s had some very heavy use. My woodworking is making A2 frames for my photography and it’s a perfect size. A very good and fair review.

[@21stcenturycaveman33]

Thank you my friend. Des

[@DontWalkInLine]

Great Video, purchased this yesterday and ready to use today to get rid of paint on a chest of drawers, looks like a good tool to have and will definitely do the job.

[@Lee2k4]

Got a lot of filling to do in my house living room walls, fed up of manual sanding with a block so gonna try one of these

[@21stcenturycaveman33]

Definitely worth a try my friend. Hope it works for you. ATB, Des

[@tomaszstabla3773]

I ordered one. need to do a bit of prep work before tilers get in my bathroom. Thanks

[@21stcenturycaveman33]

Hope it works well for you my friend. Mine's just gone kaput. Basically fallen apart after 4yrs hard abuse. Will get another. ATB, Des

[@SineadOKeeffe-ls8gd]

Great video, not just of the device, but tge applications too. Very useful! Would love to see or understand why it wasn't hooked up to hoover

[@21stcenturycaveman33]

Good point for sure. I personally don't bother with the hook up as I find it makes things too cumbersome. Shoulod work a treat though. ATB, Des

[@1walkgirl]

I got my first one in 99, it lasted untill 2 years ago, now I have the new orange one :D, still fits in the carry trunk from the old one!

[@suspendeddisbelief401]

Off to collect my 'mouse' today & this is very useful to watch before using 👍

[@21stcenturycaveman33]

Glad it helped. ATB, Des

[@audria_senna]

I bought one to restore a wardrobe. I never did it before. Thanks to teach me 😉

[@21stcenturycaveman33]

You are so welcome! Have fun, Des

[@baycast]

Great tutorial Caveman, thank you. Im waiting delivery of my new baby but am already wondering about replacement pads. So ill search for the video on making your own. Thanks for your help.

[@21stcenturycaveman33]

My pleasure. Best wishes, Des

[@sunshinerythym]

Great video very helpful, appreciated seeing how to do everything and the sandpaper replacement tip 👍one tip from me is to try and keep the product out of the shadow and in the light for demonstration for us poor sighted peeps 🙄 …..Many thanks

[@21stcenturycaveman33]

Great point! Will remember that. Best wishes, Des

[@stellashimpy4021]

Thank you so much for this video, it's easily the most helpful one about this particular mouse!

[@21stcenturycaveman33]

My pleasure. Glad it was useful. Des

[@dignamj]

Just bought this and this video was really useful for getting started. Thanks very much!

[@21stcenturycaveman33]

Glad it was helpful! Des

[@KILLAGORILLA7000]

Thanks mate, convinced me to make the purchase! Seems like just the job!

[@wilding-yt]

Great value bit of kit. I bought a similar one from Wickes a while ago - its no where near as versatile as your one but it gets the job done and save my wrists when decorating! Nice review buddy. Atb, Steve

[@maryamfaruq695]

Thank you! Love the video review! I went out and bought one from Argos!

[@21stcenturycaveman33]

Glad I could help! You won't regret it. ATB, Des

[@Wendij22]

Thanks for posting. I just bought one to get the last bits of paint of a piece of decking. Noted: the mouse is better for smaller projects, but I just want to get a the last bits of paint of the decking.

[@21stcenturycaveman33]

My pleasure. The Mouse will sort that no problem at all. I've used it frequently for larger areas and it works well and is still going strong. Thanks for watching. Hope it worked out well for you. Take care, Des

[@Wendij22]

Yup, I have noticed it that it works really well. I am nearly finished sanding the decking. It started to rain hard, just on when I reached the last corner. Haha. To be continued. Thanks again for making and posting the video. :)

[@Jimmy_one67]

thank you ..there is one of these in the shed that belonged to my dad . I wanted to see if it would be of any use in helping me decorate . I really enjoyed this video .

[@21stcenturycaveman33]

Thank you so much for taking the time to watch this video and for commenting. Best wishes and happy decorating! Take care, Des

[@TheTeamSX]

Awesome in-depth review! do you happen to know the model number of this one? Also, may I suggest that you put a referral link via Amazon so that you may be compensated for providing us with such detailed insight.Thanks!

[@21stcenturycaveman33]

+TheTeamSX Hi there. Thank you very much for your gracious comments and advice. The model is KA161. Hope it helps my friend. Take care.

[@KMARSHHH]

Thanks for the video. Found it very useful

[@21stcenturycaveman33]

Glad to hear that!

[@TurtleBushcraft]

Now that looks like a very handy tool thanks for sharing atb john

[@21stcenturycaveman33]

+Turtle Bushcraft Hi there John. Good to hear from you. Would highly recommend my friend. Take care.

[@marieellenmcd]

Thank you for this v.informative vid, just got one!

[@21stcenturycaveman33]

Great stuff. I hope it does everything you need and more besides. Best wishes, Des

[@650GSF]

Money well spent, these little tools come in very handy at times,

[@21stcenturycaveman33]

+Garry G They're a great buy Garry. Currently available from Amazon for under 18.00 squid. bargain! ATB mate

[@paulin_672]

Ordered today, then found this, thanks for the overview.

[@21stcenturycaveman33]

Hey, my pleasure. Des

[@morgatr0n]

Brilliant Video, will be purchasing one asap after a brilliant review - many thanks. Liked and subscribed!

[@21stcenturycaveman33]

Thank you very much for your kind words and for your support. Glad it helped my friend. Best wishes, Des

[@annaspyrou9670]

Brilliant video! Thank you so much for this. Now I feel ready to use it.

[@21stcenturycaveman33]

Glad it was helpful! Stay safe and well, Des

[@skeeterbug9875]

Nice Review, Good details. I ordered one from the Amazonian tribe.

[@21stcenturycaveman33]

Great stuff. I'm sure you won't be disappointed. There's probably a much upgraded model now. Take care, Des

[@TiggZ_]

Can i use this for my stair treads or will i need someone bigger?

[@21stcenturycaveman33]

This should be fine. ATB, Des

[@amandao7660]

Hi there - would it work on tiles too?

[@mark2035]

Late I know. Where can I get the glass pads for this model ? Thanks.

[@21stcenturycaveman33]

Try ebay. There's always something on there. If they don;t fit exactly, perhaps you can find some that you can cut to size? Good luck, DEs will be

[@Retrostasis]

thanks for the video. First one I found and it answered everything I needed to know, cheers!.

[@21stcenturycaveman33]

That's wonderful. Glad it helped you. Take care, Des

[@jill3152]

Thanks for useful vid. Bought ours now. Can you give more info about the type of sander paper/pad you used to scrape the paint off the windows please? Cant find anything that says it does this on the web. Thanks

[@21stcenturycaveman33]

Hi there. Tbh I've never used a pad like this on glass to remove paint. I'm assuming it just buffs it out when the paint is dry? I wouldn't bother of I were you. Just search best ways to remove paint from glass and I'm sure there will be zillions of ways. ATB, Des

[@man_v_snacks4299]

Bought one of these last year, great for sanding down my front door (panels and mouldings), gets into the gaps and corners, came here trying to find out what is the purpose of the flaps on the sanding sheets?

[@margaretmoir512]

They are replacement sanding pads for the tip of the sander. Take them off and then use them as required. Answer provided by a woman

[@DICKTURPIN1976]

@@margaretmoir512 "Answer provided by a woman" Savage! 😂

[@tonyevans22]

I just bought one,Thank you for this video,I now know what I am doing lol :-)

[@21stcenturycaveman33]

Great stuff. I hope it exceeds your expectations and enables you to do what you need to do. Take care and good luck! Des

[@tonyevans22]

21st Century Caveman yes it's great many thanks

[@1Braunton]

That's a great explanation mate. Like you our cleaner does not fiit the dust extracterDid not know you could use it on metal.more of em!!

[@21stcenturycaveman33]

Glad it was helful. Take care, Des

[@zachdavis5854]

Great video. I'm building a cabinet out of MDF board and I am an extreme novice when it comes to crafting I was wondering if this sander would be good for sanding the board so I can prime and paint the MDF.

[@21stcenturycaveman33]

Hello my friend and thanks for watching. I personally think this would be a great tool to have around. It will deal with that MDF no problem at all. Just make sure you wear a mask when sanding MDF buddy. It's banned in many European countries due to dangers of dust inhalation. Just be careful. Go for it but wear a mask! Take care. Let me know how you get on. ATB Des

[@zachdavis5854]

+21centurycaveman thank you and keep up the good work

[@MsStyler4ever]

Thank you very much sir, the video is very informative and answered all my questions

[@21stcenturycaveman33]

My pleasure. Best wishes, Des

[@stephenmozzarella6493]

Good job pal cheers

[@21stcenturycaveman33]

My pleasure. Des

[@sausages75]

great video. succint and good demonstrations. thanks

[@21stcenturycaveman33]

My pleasure. Glad you found it useful. Atb, dES

[@ketmaniac]

Sounds like a great tool for rough jobs. I'm wondering what it would be like for finer sanding where you need to sand in the direction of the grain. Have you tried it with, say, 240 grit or higher?

[@21stcenturycaveman33]

Hello my friend and thanks for watching. This is one of the most useful items I have purchased in recent years for sure. I've used it with 180 grit sheets but nothing finer. For my purposes it was fine (sanding doors, skirts, architraves, etc). Hope this helps mate, Des

[@TheWatcherWatching]

I got mine at b&q but I didn't get the other sanding pads 🤔

[@21stcenturycaveman33]

Bummer that. Thing is that some products can be packaged differently, i.e. some have more or less stuff than others even though it's the same item. Really annoying though! ATB, Des

[@BarbB56]

I have had a mouse for a few years now. Was having problems with the diamond shaped tip dropping off when sanding so have bought a new one. It still drops off. Any ideas what my problem could be please? The tiny teeth that grab the Velcro on the tip seem to be fine.

[@ninaleonard3172]

Did u ever get response from anyone on Diamond shape coming off? I have same problem!

[@21stcenturycaveman33]

Only what's in the comments I'm afraid. ATB, Des

[@BarbB56]

@@ninaleonard3172 not a response that solves the problem.

[@lw216316]

Since it is so small is there danger of overheating the motor if you run it more than 5-10 minutes at a time? I found replacement pads cheaper than original but they don't have holes. With no holes is there danger of overheating the motor because it does not get ventilation ?

[@denisesarazin6753]

Yes. I purchased this sander to sand between the rails on my deck. After 20 minutes I noticed that the mouse started to loosen. I had screwed it in very well before I started sanding. I tightened it again but noticed that the thread seemed a bit loose. I kept sanding and very soon it got very loose again and the screw felt even more like I was screwing it into butter. The sander was getting very hot and I believe that the problem is that it got so hot that the plastic on both the mouse and the part it attached to softened. After 30 minutes the entire mouse fell off in the middle of sanding. I was appalled at what poor quality this sander was. I used a DeWalt random orbital sander for the rest of the deck for many hours, with no problems. I'm returned my Black & Decker detail sander tomorrow (purchased on Amazon) . I do not recommend this product.

[@tammyvincent5142]

It's a keeper.

[@21stcenturycaveman33]

Hiya. I'm on my second one now. Absolutely love 'em. ATB, Des

[@indiawinbush8399]

LOVELY video!!!! THANK U

[@21stcenturycaveman33]

My pleasure. Thank YOU for taking the time to watch. des

[@jamesthirtyone]

I wonder what the "bunny ear". bits are for on the pads

[@21stcenturycaveman33]

For the extension bit. Des

[@OhadElbaz66]

21st Century Caveman - Can you advise whether the vibration is orbital or linear, and if it's linear is it sideways or forward-backward (this is what I am looking for and would like to avoid if it's not) ?

[@21stcenturycaveman33]

No idea mate - sorry. Why don't you Google it? ATB, Des

[@OhadElbaz66]

@@21stcenturycaveman33 I am asking here because I have already exhauseted google and it doesn't say anywhere... I thought someone who actually owns the tool and reviews it would know... but oh well.

[@artvandelay3922]

Very useful- thanks

[@21stcenturycaveman33]

You are welcome. Hope you're having a nice day where you are. Des

[@Harrysound]

Can’t wait to buy this £20 piece of magic. Litterally nothing is going to have paint left on it....

[@21stcenturycaveman33]

Ha, ha. You won't be disappointed. Funnily enough, mine recently packed up but I have hammered it relentlessly over the past 4 years and it's now kaput! Looks like there is now an upgraded model but it's more expensive. I've got this on my Amazon wish list and just waiting for either the old or new model to come up on special and I'll nab one. Best wishes, Des

[@Harrysound]

21st Century Caveman yeah I bought one. Did the skirts with it. The bed is next. Don’t buy it from amazon....go support a local DIY shop. Don’t ship your money straight out of the country....

[@misteroz]

Thanks for that - been umming and ahhing but for £20 you can't really go wrong.

[@21stcenturycaveman33]

Honestly, don't even give it any more thought. Just go and buy one and you'll never regret it. Best wishes, Des

[@hiba]

Nice.. I want to buy one but I just don't get it how does it work if the hander's surface isn't revolving?

[@21stcenturycaveman33]

Hello there. The plate underneath to which you attach the sandpaper vibrates. It really is a great bit of kit. Highly recommend. ATB, Des

[@hiba]

Oh ! Thanks for your reply ..

[@aliali4747]

Thanks. Why can't it be used for floor boards? What is best for that job?

[@21stcenturycaveman33]

Too small. You need something like a belt sander minimum. Thanks, Des

[@aliali4747]

@@21stcenturycaveman33 I see, cheers Des, good to know!

[@aliali4747]

My update / two pence on sanding floors: for anyone thinking of buying a sander to sand their floors - don't bother with a belt sander, they're too small, and way too time consuming, and don't apply enough downwards pressure to even out an uneven wooden floor. They weigh about 6kg and not designed to be pressed hard onto a floor, only to carry their own weight along a floor. A belt sander may be okay if your floor is very even. But what you really need - especially for any large floor - is a DRUM sander. They weigh 30-40kg and can even out an uneven floor. You then also need an edge sander as a drum sander won't get to edges. It is a long process, and worth planning out to make sure you make the most use of both the sanders you hire.

[@ISOLDEPAZ]

Hey there! I wonder if tirangular sandpaper that fits it is easy to find.

[@ISOLDEPAZ]

Nevermind, came across your video about diy sandpaper. You covered it all. Thank you!

[@21stcenturycaveman33]

LOl. OK, thank you. Stay safe and well, Des

[@jamieormonde2358]

Hi ive recently glossed my interior doors (bad decision) Would this sander be able to get gloss off?? I purchased the argos basic one and thats terrible

[@21stcenturycaveman33]

Yes of course mate. This would work fine. ATB, Des

[@blessedbeford6130]

Thanks very much, I couldn’t work out how to fix the finger to mouse

[@21stcenturycaveman33]

My pleasure. Best wishes, Des

[@pi1810]

I have one, and I love it.

[@21stcenturycaveman33]

Good choice. I'm on my 2nd on now and have no regrets. ATB, Des

[@iaincampbell4527]

Inherited one of these from deceased father in law without instructions or box. You say in your video that it attaches to a vacuum cleaner. Does it not original come with a bag ?

[@21stcenturycaveman33]

Hello Iain. No bag included. ATB, Des

[@vincentshort1988]

Hi, would you say it is safe to use this on interior walls (plaster) before painting?

[@21stcenturycaveman33]

Hi there. Yes, it will for sure but you need to wear a mask due to dust. I've already covered this in an earlier video. Plse see below: kzbin.info/www/bejne/jF6XgYOHp5l8Z5Y

[@MiscellaneousMichelle]

Pretty awesome job

[@21stcenturycaveman33]

Thanks very much. Hope it helps someone. ATB, Des

[@mianarshadmahmood5025]

Which mathad to fix sander with detail sander?

[@21stcenturycaveman33]

Hi there. It's the Hook and Loop method(like velcro). ATB, Des

[@barrelman2056]

Fiberglass boat ? Want to take of old paint anygood?

[@21stcenturycaveman33]

I can't see why not. I would have thought something like this would work well although I haven't actually tried such a project myself. Let me know how you get on if you decide to proceed. ATB, Des

[@barrelman2056]

Works perfect..no more sanding blocks good stuff lad.

[@21stcenturycaveman33]

Fantastic news! Thanks for the update Sir! Glad it's working out for you. ATB, Des

[@barrelman2056]

What you fish for sr ?

[@rosstituteuk]

would this be powerful enough to sand back stained wood, to get back to the natural grain ?

[@21stcenturycaveman33]

No probs. However, you would need to use different grades of sandpaper starting with coarser first. Good luck, Des

[@rosstituteuk]

Des thanks for the reply. Do you think the sheets that are included with the mouse would do? Or would I need to buy something else? Thanks again, take care

[@21stcenturycaveman33]

No worries Sir. Unfortunately, I cannot remember exactly what sheets came with the Mouse but I do know that I used them for a multitude of tasks and they were more than adequate. They are quite easy to come by but the stock replacements can be quite expensive. I seem to recall someone leaving a comment to say that he bought quite a few at a bargain price from flea bay. Might be worth checking it out. Alternatively, I did another video illustrating how to make up your own. You ned to get the Hook and Loop backing and just cut them down to size. Check out the vid my friend. Good luck mate, Des

[@dinamoharram2427]

​Thanks fr the great video.. Am about to buy a secind hand one.. Obviously missing z extra replaceable long tip. Wonder if it is sold seperately nd frm where. I wiuld also appreciate very much if u write z link of diy the sanding replacement pieces pls.. Thx in advance.

[@amsi1980]

Can you sand walls and ceiling before painting

[@21stcenturycaveman33]

Yes sure but only bother doing this if absolutely necessary. Also, if you've got a big job on you will need something bigger than this and proper PPE such as respirator /masks, etc. Stay safe and well, Des

[@Eatos_17]

Will this help smooth my skirting boarded as they have a lot of bumps?

[@21stcenturycaveman33]

Hello my friend. That will depend what the 'bumps' are. If they're nails which have been painted over then the answer is no. However, if they're just bits off lumpy paint, dirt and grime which have been painted over then no problem at all my friend. Hope that helps, Des

[@Pebblesmas]

Thx so much! 👍

[@21stcenturycaveman33]

My pleasure. Des

[@kianodonoghue1075]

Can I use it to stand down a door?

[@21stcenturycaveman33]

Absolutely. It would be perfect for the job. Good luck! Des

[@SarahBaghri]

Thank you very much...

[@21stcenturycaveman33]

You're most welcome. Des

[@robertmiller4741]

hi i have had 2 of these now both blew up due to dust build up inside the motor, (and i attached the hoover ) wont be buying a third one,

[@mattmckenna4532]

Thank you

[@21stcenturycaveman33]

You're welcome

[@alastairdocherty357]

Thanks for the video sir, really helped

[@21stcenturycaveman33]

My pleasure. Thank you for watching. Glad it was useful. Take care, Des

[@xavierzzzzzzzz]

thanks, very useful

[@21stcenturycaveman33]

My pleasure, Take care, Des

[@DjDugiUK]

the pads have different numbers on the back p80 p120 p180 any reason why?

[@21stcenturycaveman33]

Hello there my friend. Yes, it relates to how course the grit is on the paper. P80 for example will be a coarse grit suitable for removing wood and material whilst P180 will be used for finer sanding. Basically, the larger the number the finer the grit. Manufacturers also helpfully indicate which grit is best for different types of tasks. No doubt here will also be loads of info' if you Google it. Hope this helps, Des

[@filippoplutini3485]

thanks for the video i bought one just yesterdy for 29 euro .

[@21stcenturycaveman33]

Great stuff! They really are excellent. You won't regret it I'm sure. Take care and best wishes, Des

[@norocketsciencebuild5371]

Thanks for the review fella: this one was made in 2013, so I guess later version than the one you are reviewing: my full review of the updated version of the mouse sander is on here, I paid £25 for it off Amazon too: kzbin.info/www/bejne/fqnRd2Btbbh-obc

[@cliverudkin493]

Shame that there is a shadow cast over the item during the majority of the demonstration.

[@21stcenturycaveman33]

Apologies. Des

[@emmaketi5795]

Why this sanders are so loud... ,so bothering ,are all so loud???

[@deano386]

bad sander takes ages with aby grit and mine 10 min ago fell in half. going in the bin where it belongs

[@21stcenturycaveman33]

Really sorry to hear that you've ended up with a dud. What a bummer! I've had mine for @ 3yrs and really hammered it and it's still going strong. Kind regards, Des

[@luiscosta6487]

I just bought one..

[@21stcenturycaveman33]

+Luis Costa Hello there my friend. I hope it meets your expectations! ATB

[@aaronpatrickwickham]

thanks ..very useful....

[@21stcenturycaveman33]

My pleasure. Take care, Des

[@antoniofactor1995]

Very nice advertisement lol!

[@21stcenturycaveman33]

Hi there. No hesitation recommending this my friend. Damn good little sander that. Best wishes, Des

[@PinkPoo]

I bought this one, too loud in my opinion

[@21stcenturycaveman33]

Yes it is a bit noisy but well worth it for the prioce I paid. ATB, Des

[@dinamoharram2427]

​@@21stcenturycaveman33what does Atb Des means pls.?

[@LangylangZA]

ok

[@ahmedsaleh8845]

Very noisy 🔊

[@anonymous7192]

Lmfao