DIY boombox from an old cassette player, car multimedia 7010B and 4 inch car speakers MAC AUDIO

  Рет қаралды 477,895

DIY shop

DIY shop

Күн бұрын

I made a home boombox from an old cassette player, 7010B car multimedia and 4 inch MAC AUDIO car speakers
I made a small but powerful boombox from an old 30-year-old cassette player, of which I used only the box.
Car multimedia with bluetooth usb, sd card, aux and playing WAV, FLAC, MP3, AAC, MPEG music and MPG, MOV, WMV, AVI video.
Car speakers 4 inch MAC AUDIO APM FIRE 10.2, power supply from an old laptop 12V 10A and a small battery for autonomous operation of the boombox.
Make a bluetooth speaker with good power and beautiful appearance!
You will be able to see how to make a bluetooth speaker!
You can attach additional speakers, the amplifier is 4x50 and will provide enough power!
Clean signal reception from available radio stations.
Track: Max Brhon - The Future [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Max Brhon - The Future...
Free Download / Stream: ncs.io/TheFuture

Пікірлер: 428
@johnyk.4738
@johnyk.4738 2 жыл бұрын
Super, też bawiłem się w różnego rodzaju przeróbki, ale to co dzisiaj widzę pierwsza klasa. Taki talent powinno się spieniężyć.
@10diy
@10diy 2 жыл бұрын
Thanks!
@robertkoch8924
@robertkoch8924 2 жыл бұрын
zgadzam sie z Toba
@rafah9696
@rafah9696 2 жыл бұрын
One of the best projects! I wish there was dialogue but, Considering this is KZbin it’s a great show.
@10diy
@10diy 2 жыл бұрын
Thanks!
@АлексейРушников-г8и
@АлексейРушников-г8и 2 жыл бұрын
Я так понимаю, нет ни чего не возможного, когда руки растут из правильного места! КРУТО!
@Red_Avenger
@Red_Avenger 2 жыл бұрын
О занимался я подобным))) Только пластик резал натянутой нихромовой проволокой, с поданной на неё напряжением (чтобы была тёмно-красная). Режет по линии ровно и без мучений с лобзиком. Но пластик - плохой материал для акустики, особенно такой как на видео - тонкий. По моему его хоть мастикой резиноподобной покрывай - толку не будет. С другой стороны - и так сойдёт.))) К тому же снаружи выглядит более или менее красиво, но внутри - не очень. Да и свинцовый аккумулятор проще заменить на литиевые элементы с платкой балансировки и защиты + блок питания и модуль зарядки. Ну и не на "спермо" клей всё садить, а на стойки. Благо они продаются. М3 - не проблема купить. Ну и вместо мигалки можно было организовать индикатор уровня. Было бы ИМХО разумнее.
@pipespb
@pipespb 2 жыл бұрын
@@Red_Avenger Он и внешние громкоговорители оставил. Так что вполне для прикроватной тумбочки пригодно. Одно время такие на Авито продавались, примерно $55. Не купил тогда, теперь их нет. Но сам думал что-то похожее сделать, в командировки с собой брать, кино смотреть, музыку слушать - не было размеров подкассетника (надо что-то покупать из хлама - дома такого нет), чтобы уместилась магнитола. А тут полная инструкция. Теперь точно сделаю!
@Red_Avenger
@Red_Avenger 2 жыл бұрын
@@pipespb Было бы желание - сделать можно что угодно. Удачи Вам.
@Forsemus
@Forsemus 2 жыл бұрын
Вопрос такой,чем он брызгает пластик из аэрозольного баллончика? И клей тоже интересен.Может это дихлорэтан?
@Red_Avenger
@Red_Avenger 2 жыл бұрын
@@Forsemus Это нечто вроде двухкопмпонентного клея, с аэрозолем активатором. З.Ы. Дихлорэтан - весьма токсичен.
@MohamedAlSokkary
@MohamedAlSokkary 2 жыл бұрын
It is amazing project as usual Very brilliant idea and perfectly applied. Thanks for sharing
@10diy
@10diy 2 жыл бұрын
Thanks!
@seejur3943
@seejur3943 2 жыл бұрын
Ln0
@СИльшат
@СИльшат 2 жыл бұрын
Отличная работа! Надо поменять микросхему усилителя на TDA7850 или TDA7851. Будет меньше греться и расходовать энергию батареи и лучше звучать. Я так сделал на своем 7010B и звучание стал намного приятнее, чистые высокие и сильный бас.
@mstrgreeny
@mstrgreeny 2 жыл бұрын
а как вообще звук с балалайки? есть подозрение, что за 3.5к там вода будет
@user-ovsan007
@user-ovsan007 Жыл бұрын
Дал старому мафану вторую жизнь 👍👍👍💪👌
@АлексейКозлов-и7я
@АлексейКозлов-и7я 2 жыл бұрын
Чувак ты просто гений! Обалдеть просто!
@10diy
@10diy 2 жыл бұрын
Thanks!
@TheOniblade
@TheOniblade 2 жыл бұрын
Как оригинальное изделие - прекрасно ! Но для ретро-фанов , не то . Все таки "бумбокс" это ТОЛЬКО кассетная радио магнитола . Вот такие мы ретрограды , гы ! Но за забавную штуку - лайк !
@10diy
@10diy 2 жыл бұрын
Thanks!
@foorje
@foorje 2 жыл бұрын
The bodywork is very clean, nice job there. But I feel like the LEDs are pretty tacky and it's a shame that you're using a lead acid battery, a nice protected lithium pack would last a lot longer and weigh a lot less.
@shadwxero
@shadwxero 2 жыл бұрын
a more diffuse plastic could make it look better and use the LEDs as waveform generators
@joakimjocka8022
@joakimjocka8022 2 жыл бұрын
i had the exact same thought
@intraxx88
@intraxx88 2 жыл бұрын
well, it's all cheap enough
@ronb6182
@ronb6182 2 жыл бұрын
Li on batteries are not all what they are cracked up to be. I seen many break open at work. We use them in our controllers and some get puffed up it's hard to get them out of the unit. As long as you don't over charge or over load the lead acid battery your ok. That little bit of weight isn't going to matter all that much. How long does a laptop battery last your lucky if you get 5 years out of it. I have old ones in my computers but they don't hold a charge very long. 73
@RealEpikCartfrenYT
@RealEpikCartfrenYT 2 жыл бұрын
@@ronb6182 well SLA batteries lose capacity too.
@UrbanoDagrippino
@UrbanoDagrippino Ай бұрын
One hell of a boombox project
@JuanManuel123ify
@JuanManuel123ify 2 жыл бұрын
Impresionante trabajo mi querido amigo.......Toda una obra de arte sin duda alguna.......Enhorabuena por su gran labor de reciclaje......Gracias por compartir sus proyectos con la comunidad de youtube.......Un gran abrazo fraternal desde Las Islas Canarias (España)..............................
@10diy
@10diy 2 жыл бұрын
¡Muchas gracias por las amables palabras!
@Odessia-ij5ys
@Odessia-ij5ys 2 жыл бұрын
Done a great job old and new technology together
@10diy
@10diy 2 жыл бұрын
Thanks!
@planker
@planker 2 жыл бұрын
Excellent. That would make a nice gift, and you gave the radio a second chance. I like this stuff and the video provided some motivation, so now I need to find something I can shove a Mega 2560 into.
@10diy
@10diy 2 жыл бұрын
Thanks!
@dhemisomsantos2999
@dhemisomsantos2999 16 күн бұрын
Cara que show de som viu muito legal parabens. Audio bem limpo gostei.
@Pycckii-Mip
@Pycckii-Mip 2 жыл бұрын
Молодец. Оживил то что давно умерло. Словно волшебник. Однозначно +.
@10diy
@10diy 2 жыл бұрын
Thanks!
@Zodliness
@Zodliness 2 жыл бұрын
I used to covertly install Casio LCD TV's inside prison approved Roberts radios way back in the 1980's. I made a killing doing it on a three stretch! 🤣
@Teknopottu
@Teknopottu 2 жыл бұрын
I didn't know there was LCD's in the 80's. Neat!
@Zodliness
@Zodliness 2 жыл бұрын
@@Teknopottu Hi Teknopottu. In 1982, Seiko Epson released the first LCD television, the Epson TV Watch, a small wrist-worn active-matrix LCD television. Sharp Corporation introduced the dot matrix TN-LCD in 1983, and Casio introduced its TV-10 portable TV. In 1984, Epson released the ET-10, the first full-colour pocket LCD television. I would most get asked to mount the Casio LCD TV's because it's internal chassis were low power consumption, fitting nicely into (my two favourites of the time) the classic Roberts and Grundig radios. Hope this answers your comment. Thanks for your input, those were the hay days of innovative 'covert' electronics. 🤣
@Teknopottu
@Teknopottu 2 жыл бұрын
@@Zodliness Thank you for your reply! This was most interesting info. Never seen any of these, only small CRT's here in Finland.
@Zodliness
@Zodliness 2 жыл бұрын
@@Teknopottu You're most welcome. I'm glad the information was useful and informative. always a pleasure to discuss, not argue. Have a great day in Finland, from the UK.
@Teknopottu
@Teknopottu 2 жыл бұрын
@@Zodliness Thanks, mate. It's evening now here, 18:58 or almost 7PM. It has been a good day, prepping for the first music festival visit in three years. It'll be a blast to see Iron Maiden in live in saturday. Have a good one!
@АндрейАнтонов-ы3з
@АндрейАнтонов-ы3з Жыл бұрын
Как хорошо, что я собрал комп на 11м поколении!!))
@ВячеславАнтипов-п9и
@ВячеславАнтипов-п9и Жыл бұрын
Стоял бы в место светодиодной ленты графический эквалайзер, смотрелся ещё круче.
@АртемКутяев-у9ц
@АртемКутяев-у9ц Жыл бұрын
Смотрится обалденно! Такую же хочу!
@CriadordeRiquezas
@CriadordeRiquezas 2 жыл бұрын
SHOW DE CRIATIVIDADES INOVAÇÃO INVENÇÃO MODERNIDADES PARABÉNS SUCESSO!
@10diy
@10diy 2 жыл бұрын
Thanks!
@stormchaser300
@stormchaser300 Жыл бұрын
Nice build i would of used lithium rechargeable batteries and sound activated L E Ds. I would of also put on a telescopic antenna on it for the radio.😁😁😁😁👍👍👍👍👍👍👍
@thesvalker3720
@thesvalker3720 2 жыл бұрын
Молодец все аккуратно как заводское
@10diy
@10diy 2 жыл бұрын
Thanks!
@johnsimun6533
@johnsimun6533 2 жыл бұрын
All 4 speakers 2 built in, and the 2 external speakers work, such as in a car, left and right, front and back?
@10diy
@10diy 2 жыл бұрын
Correct!
@БорисВеличко-т7р
@БорисВеличко-т7р Жыл бұрын
Молодец! Оптимальный вариант за небольшие деньги!! Чувак-мастер!!! 🥰🥰🥰
@thelostgrimm
@thelostgrimm 2 жыл бұрын
So weird. i was actually thinking about making something like this for some collected music videos. Nice build.
@10diy
@10diy 2 жыл бұрын
Thanks!
@radiopower4150
@radiopower4150 2 жыл бұрын
молодец парень....... красиво сработал.
@10diy
@10diy 2 жыл бұрын
Thanks!
@АлександрОвер-о6к
@АлександрОвер-о6к 7 ай бұрын
​​@@10diyможно подробнее? Это параметры батареи и на сколько её хватает при полной отдачи ? Просто есть точно такая же магнитола динамики и автомагнитола . хочу собрать но смущает то что аккумулятор должен быть серьёзный
@inzyyn2895
@inzyyn2895 2 жыл бұрын
You should start manufacture more and sell!!! JUST WOW.
@10diy
@10diy 2 жыл бұрын
Thanks!
@HARE_KRISHNA_777_VaY_7...
@HARE_KRISHNA_777_VaY_7... 2 жыл бұрын
Шикарно.Мужик у тебя руки золотые.(Мозги наверное тоже!!!))))
@10diy
@10diy 2 жыл бұрын
Thanks!
@Jords1714
@Jords1714 2 жыл бұрын
Very nice creativity.
@10diy
@10diy 2 жыл бұрын
Thanks!
@lundsweden
@lundsweden 2 жыл бұрын
Holy hell, its pimp my boombox! Cool!
@amitsonwane1287
@amitsonwane1287 Жыл бұрын
Great job done,amazing project
@estan6671
@estan6671 2 жыл бұрын
This is the future👍
@10diy
@10diy 2 жыл бұрын
Thanks!
@cristianoronaldopaulomadra4705
@cristianoronaldopaulomadra4705 Жыл бұрын
Esto es una obra de arte me encanta sus vídeos y se merece todo lo mejor que Dios le bendiga siempre 🙏🙏🙏 un abrazo fuerte desde España Asturias mi enhorabuena maestro
@Budy_Sasongko.
@Budy_Sasongko. 2 жыл бұрын
Muanthaaaps kereeen&Creative sekali...😍👍🏻👍🏻👍🏻
@tripsadelica
@tripsadelica Жыл бұрын
Fantastic job! Bravo!!!
@TheNITRO68
@TheNITRO68 2 жыл бұрын
legendary my friend and that's why I subscribed keep up the great content your new subby from Australia :)
@10diy
@10diy 2 жыл бұрын
Thanks!
@lexa7856
@lexa7856 2 жыл бұрын
у меня Панасоник такого же типа, в идеальном состоянии! достал с антресоли, поменял пасики на механизмах, сзади врезал блютуз модуль что бы оригинальный вид не портить, поставил в отсек для батарей аккумы литийонные на 3 Ам с БМС платой, да ещё, динамики поролоном заглушил, для бассов (хотя система Х-ваss исправно работает) и всё! красота и флешки читает и с телефона и касеты и радио! ни один джибиэль рядом не стоит! от силы потратил рублей 400... везде с собой вожу на удивление малолеткам, особенно школота подходит и спрашивает, где такой купить?))) всегда смешно...
@yanvarskiy
@yanvarskiy 2 жыл бұрын
Рассмешил конечно. Jbl в разы лучьше будет играть благодаря современному усилителю D класса с алгоритмами обработки звука на разных мощностях и сбвуферной камере м пассивными излучателями. Для ностальгии и удивить малолеток конечно то что нужно
@lexa7856
@lexa7856 2 жыл бұрын
@@yanvarskiy вот не поленился сходил посмотрел модель... Panasonic RXFT560 в этом классе из современных JBL-блютуз колонок по звуку конкурентов нет! единственное у SONY есть какая то модель, точно не помню, там звук на уровне, но и цена не оправданная, рядом ставили в каких то композициях лучше, в каких то проигрывает! согласен с тобой что усилители D класса и мощнее и экономичнее, но у меня оригинальный панасоник маде ин джапан))) и по истечению около 30 лет, качество звука на нём не изменилось! единственное пасики на механике поменял и всё! а с JBL что будет через 10 лет? тут да же сравнивать не чего, единственное в чём он проигрывает так это в габаритах...
@yanvarskiy
@yanvarskiy 2 жыл бұрын
@@lexa7856 ну собственно габарит довольно таки решающий фактор. JBL Boombox 2 Black примерно в размерах так тут просто нечего сравнивать gbl валит будь здоров и не один патефон тех времён не сравнить. То что у вас олдскульный аппарат так ет даа, я сам любитель, только большого винтажного звука
@lexa7856
@lexa7856 2 жыл бұрын
@@yanvarskiy я вообще любитель хорошего звука, по этому и ценю качество, чего нельзя сказать о JBL, купили мы с ребятами в подарок парню такую колонку с караоке, по тем деньгам около 50т.р., пару раз с ней на природу съездили, и всё здох бобик! с тех пор продолжаю брать свой панасоник))), на счёт валит будь здоров, есть у меня походная колоночка на 5 вольт, с одним динамиком и двумя пассивниками, вот её мне в походе хватает за глаза, маленькая и мощная! но звучание отвратительное! нонейм правда, но от JBL далеко не ушла!
@pipespb
@pipespb 2 жыл бұрын
@@yanvarskiy Регулируемый импульсный блок питания, который ты именуешь как "усилитель D", в ближайшее время (лет десять) не сможет звучать лучше аналогового усилителя...
@weirdorwhat7294
@weirdorwhat7294 2 жыл бұрын
Wow that is awesome even my cat says that's purr fection. 🐈
@SosedSeba
@SosedSeba 2 жыл бұрын
You should add passive radiators on the back
@Teknopottu
@Teknopottu 2 жыл бұрын
One could make the enclosures better by strenghtening it with fiberglass and/or adding some wool or similar material inside to make the speaker elements think that the enclosure is bigger. A bit of work but would definately make a difference.
@ronb6182
@ronb6182 2 жыл бұрын
@@Teknopottu I always took the fiber out of my speakers to make them sound better. My blind friend liked the sound so I guess his ears are better than mine. 73
@Teknopottu
@Teknopottu 2 жыл бұрын
@@ronb6182 It depends on the case. Sometimes it is better sounding but in a small closed enclosure like in the video it is almost always better to have some fiber or wool if possible. When I was a young lad with nothing but time I read a car hifi guidebook from cover to cover several times so pretty sure about stuff like this. Not a huge hustle to try it both ways and find a blind friend to listen which is better ;)
@DeadSouls9186
@DeadSouls9186 Жыл бұрын
Молодец, красиво всё 👍👍👍👍👍👍👍👍👍👍👍👍👍
@naidermedina4466
@naidermedina4466 2 жыл бұрын
Deberias de subir mas videos de edte estilo de Bocinas de un tamaño mas portatil (pequeño) y que tenga baterias recargables muy buen trabajo....!!! Saludos desde la tierra de los Nahuales MEXICO!!! 👌👌👌✌️✌️✌️
@10diy
@10diy 2 жыл бұрын
Thanks!
@wernerdaedalus9463
@wernerdaedalus9463 2 жыл бұрын
👍 Very Nice Job. i like that idea
@10diy
@10diy 2 жыл бұрын
Thanks!
@pkmondal6099
@pkmondal6099 Жыл бұрын
Inspire engineering.thank you .
@piciuflorentin9939
@piciuflorentin9939 2 жыл бұрын
Very nicely done 👍. I would have liked to hear the speakers alone without the additional ones! 👍
@10diy
@10diy 2 жыл бұрын
At the beginning of the video it is without additional speakers!
@Sneper58
@Sneper58 2 жыл бұрын
гений и золотые руки)
@eugenex8892
@eugenex8892 2 жыл бұрын
DIY-less but seriusly cool project.
@10diy
@10diy 2 жыл бұрын
Thanks!
@WildBoarBiker
@WildBoarBiker Жыл бұрын
Великолепная идея!
@robertorodriges4116
@robertorodriges4116 2 жыл бұрын
Super system friend
@mrjameschong
@mrjameschong 2 жыл бұрын
aplausos para el pana!!!!!👏👏👏👏👏👏👏👏👏
@10diy
@10diy 2 жыл бұрын
Thanks!
@vichetdragoncars3186
@vichetdragoncars3186 2 жыл бұрын
Interesting model
@10diy
@10diy 2 жыл бұрын
Thanks!
@peterkovacs6065
@peterkovacs6065 Жыл бұрын
Ohh man its amazing…grat!
@godbound
@godbound 2 жыл бұрын
My 1st bomb box from circuit City I would Totally Rock The box
@1974UTuber
@1974UTuber 2 жыл бұрын
That's a great idea
@10diy
@10diy 2 жыл бұрын
Thanks!
@banaishe
@banaishe 2 жыл бұрын
Good job! 👍
@10diy
@10diy 2 жыл бұрын
Thanks!
@ОлегСемёнов-ж9т
@ОлегСемёнов-ж9т 2 жыл бұрын
Classy ATLANTA AT-580 💪😎🤘
@MedievalFolkDance
@MedievalFolkDance 2 жыл бұрын
You, sir, are a goddam artist!
@10diy
@10diy 2 жыл бұрын
Thanks!
@JonnyMudMower
@JonnyMudMower 2 жыл бұрын
Love this idea 🍻🍻🇨🇦👍🏻
@10diy
@10diy 2 жыл бұрын
Thanks!
@robertojuarez959
@robertojuarez959 2 жыл бұрын
I love the creations you make, from a simple pair of speakers, some led lights, a bluetooth module and frequency controls, you achieve very cool creations, although I would like to know if you can, something like tuning a stereo from the 2000s, as a box of subwoofer, with paint and led lights and everything, adding led new speakers, bluetooth module, among other things🤔😅🤩😍.
@10diy
@10diy 2 жыл бұрын
Yes it can be done, I love restoring and modifying old things!
@robertojuarez959
@robertojuarez959 2 жыл бұрын
@@10diyIf you like to restore repair and modify old things I wanted you to restore an old Sony mini component called sony lbt xb66 adding new xplod brand speakers, with a sub woofer in the hidden speaker, with red LED lights with a reddish black paint with details chrome and with a Bluetooth module😍🤩.
@sawomirszutkowski1737
@sawomirszutkowski1737 2 жыл бұрын
i love it, take my money !!
@alainduquenois3812
@alainduquenois3812 Жыл бұрын
Plutôt original la conception
@garrettg151
@garrettg151 2 жыл бұрын
im just happy the inside of this thing was so disgusting, it hurts me to see old stuff repurposed when it could be saved, but this is excellent lol. glad it popped up on my feed.
@10diy
@10diy 2 жыл бұрын
Thanks!
@luissanchezmonsalve4740
@luissanchezmonsalve4740 2 жыл бұрын
La creatividad en acción.
@10diy
@10diy 2 жыл бұрын
Thanks!
@Дмитрийиванцов-э3ш
@Дмитрийиванцов-э3ш 2 жыл бұрын
у меня такой же магнитофон был
@jhas1980
@jhas1980 27 күн бұрын
Impressive...
@NguyenThanh-yw6id
@NguyenThanh-yw6id 2 жыл бұрын
Number 1.
@10diy
@10diy 2 жыл бұрын
Thanks!
@alexcordeiro5883
@alexcordeiro5883 2 жыл бұрын
Que trabalho excelente 👏👏👏
@10diy
@10diy 2 жыл бұрын
Thanks!
@rudyboy2010
@rudyboy2010 2 жыл бұрын
super cool
@10diy
@10diy 2 жыл бұрын
Thanks!
@rudyboy2010
@rudyboy2010 2 жыл бұрын
Love the beats to .
@thedude8046
@thedude8046 2 жыл бұрын
Very cool idea!
@10diy
@10diy 2 жыл бұрын
Thanks!
@Jaybee352
@Jaybee352 2 жыл бұрын
Genius idea and awesome work.
@10diy
@10diy 2 жыл бұрын
Thanks!
@o.k.9142
@o.k.9142 2 жыл бұрын
Awesome result, man!
@pachupachu2390
@pachupachu2390 2 жыл бұрын
എന്റെ ഇഷ്ട വിനോദം ♥️
@juanjoseavilabardales7968
@juanjoseavilabardales7968 2 жыл бұрын
la transformación te quedó hermoso .
@10diy
@10diy 2 жыл бұрын
Thanks!
@bluemichimusic9507
@bluemichimusic9507 2 жыл бұрын
Love this one!
@10diy
@10diy 2 жыл бұрын
Thanks!
@sanek869
@sanek869 Жыл бұрын
Красавчик бро
@sonyericssoner
@sonyericssoner 2 жыл бұрын
My brother has the same one since the 90s but its made by PANASONIC. This is probably a counterfeit
@spider0sly
@spider0sly 2 ай бұрын
Where can I buy such a 220V board for 12V power supply - Because I don't know which one to buy
@themattprincebro
@themattprincebro Жыл бұрын
Hello what you use to cut the plexiglass? Thanks
@edupena5953
@edupena5953 2 жыл бұрын
Que guapo, oleee y suscrito
@10diy
@10diy 2 жыл бұрын
Thanks!
@krism2746
@krism2746 Жыл бұрын
What is the 12v power supply board called? Why do you even need it since the battery is 12 volts?
@sero6020
@sero6020 2 жыл бұрын
Mega cool😎👍
@10diy
@10diy 2 жыл бұрын
Thanks!
@slappymcphee
@slappymcphee 2 жыл бұрын
Good Lord what a trainwreck
@vincentjohnson2088
@vincentjohnson2088 2 жыл бұрын
Fantastic👍👍 adipoli
@10diy
@10diy 2 жыл бұрын
Thanks!
@channelwoodgrange
@channelwoodgrange 2 жыл бұрын
What is it you're spraying on after you glue the plastic parts together?
@AndyNE1979
@AndyNE1979 2 жыл бұрын
Activator.
@chris.o
@chris.o 2 жыл бұрын
I’d love to have one like this
@Odessia-ij5ys
@Odessia-ij5ys 2 жыл бұрын
Some times i do Crazy cool project
@10diy
@10diy 2 жыл бұрын
Thanks!
@MacMelmac
@MacMelmac 2 жыл бұрын
I think you should put some speaker dampening behind the speakers to get even better sound.
@sunicram
@sunicram 2 жыл бұрын
What is that liquid glue that you're using with some spray on it?
@10diy
@10diy 2 жыл бұрын
The spray is a hardener. As a brand: SOUDAL
@aitort
@aitort 2 жыл бұрын
Que ingenioo😏😏
@10diy
@10diy 2 жыл бұрын
Thanks!
@johnnyray34
@johnnyray34 2 жыл бұрын
Nice!
@10diy
@10diy 2 жыл бұрын
Thanks!
@3DIYOriginal
@3DIYOriginal 2 жыл бұрын
Very Impressive Work !!! 👍🏻👍🏻👍🏻😎
@10diy
@10diy 2 жыл бұрын
Thanks!
@Santexnik.72
@Santexnik.72 2 жыл бұрын
Замечательно 👍
@10diy
@10diy 2 жыл бұрын
Thanks!
@vladadjekic7828
@vladadjekic7828 2 жыл бұрын
Odlična ideja,.ja dugo trazim Dok za smartfon ali svi su za ajfon,ajped itd,.neznam da li postoji adapter neki sa ajfon ulaza na smartfon. Ili možda ceo Dok za smartfon.Ovo vaše je baš proizvodnja.Svaka čast.
@V_channel_
@V_channel_ 2 жыл бұрын
What are you spraying after applying superglue?
@10diy
@10diy 2 жыл бұрын
Hardener for the glue! It will not tighten without it.
@V_channel_
@V_channel_ 2 жыл бұрын
@@10diy Thanks for the reply. I was thinking it was standard superglue, guess it was not.
@hamzashahbaz706
@hamzashahbaz706 2 жыл бұрын
Awesome! But one question did you put any charge controller for the battery? as the battery would be ruined cuz of overcharging .
@10diy
@10diy 2 жыл бұрын
The power supply does not work in the absence of load. He stayed on an old laptop.
@ronb6182
@ronb6182 2 жыл бұрын
Just use a charger that has all the electronics and you will be fine. My problem I let the batteries go too low and forget to charge them. I put many in my lantern flashlights I just have to remember to charge the battery. 73
@aikonlatigid
@aikonlatigid 2 жыл бұрын
The most important thing is CHASSIS, especially into digital world which everything obsolete very quickly..
@frankmeier2459
@frankmeier2459 Жыл бұрын
Kass-player ass boombox verry good❤😊
@flaviofaria7485
@flaviofaria7485 2 жыл бұрын
Que show!! Parabéns 👏👏 Eu tiraria um pouco os leds mas se tiver como desligar seria ótimo. Onde vende, onde podemos comprar??
@10diy
@10diy 2 жыл бұрын
Obrigado! Os LEDs se apagam.
@rectify2003
@rectify2003 2 жыл бұрын
Bravo Subscribed
@10diy
@10diy 2 жыл бұрын
Thanks!
@khaligazizov128
@khaligazizov128 2 жыл бұрын
Super
@alex6989
@alex6989 2 жыл бұрын
que chimba, gracias yo con un Radio Pantalla Boss guardado...
@danhilti8543
@danhilti8543 2 жыл бұрын
Вобще огонь😇👍👍👍👍👍
@10diy
@10diy 2 жыл бұрын
Thanks!
DIY Boombox portable and powerful than pvc pipes
17:14
DIY shop
Рет қаралды 3,5 МЛН
This off-the-grid cassette player is a wind-up
11:20
Techmoan
Рет қаралды 289 М.
Help Me Celebrate! 😍🙏
00:35
Alan Chikin Chow
Рет қаралды 85 МЛН
"كان عليّ أكل بقايا الطعام قبل هذا اليوم 🥹"
00:40
Holly Wolly Bow Arabic
Рет қаралды 4,7 МЛН
Flipping Robot vs Heavier And Heavier Objects
00:34
Mark Rober
Рет қаралды 58 МЛН
Un coup venu de l’espace 😂😂😂
00:19
Nicocapone
Рет қаралды 11 МЛН
Three Ways To Convert Mp3 Bluetooth For Old  Radio Cassette Tapes
28:09
Share Tech Creative
Рет қаралды 1,3 МЛН
Diy Multimedia Boombox, Android box
22:37
DIY shop
Рет қаралды 81 М.
31 Gadgets That Are At Another Level
20:32
YouFact Tech
Рет қаралды 523 М.
14 Band Spectrum Analyzer Part.3  | Acrylic Tower
22:57
PLATINUM
Рет қаралды 4,6 МЛН
Homemade Car-Audio Boombox - V3
19:50
TE
Рет қаралды 233 М.
diy bluetooth speaker  car stereo multimedia
33:28
BW DIY
Рет қаралды 217 М.
DIY MultiMedia Bluetooth Speaker 4.1ch | Arduino VU Meter | Acrylic
34:40
How to Make: STEREO BOOMBOX! I turned OLD Audio Gear into a sound system!
18:09
Help Me Celebrate! 😍🙏
00:35
Alan Chikin Chow
Рет қаралды 85 МЛН