DIY - Building the ultimate Rear Mount Radiator setup - Part 2

Redoing the rear mount radiator for the Quad turbo LS S4.
This setup will be more sleek, should cool 1000hp+ and should “auto bleed”.
Continuation from part 1 = • DIY - Building the ult...
Modified an expansion tank that I bought off Amazon. I also had to modify the inlet and out of the radiator to make the new expansion tank work. In theory because I'm returning the coolant to the expansion tank first, it should allow the air to separate from the coolant. This should have less chance of air getting pushed through the radiator.
I intentionally went larger on the expansion tank to the radiator in hopes that it does not get backed up. If you also notice the extension tank inlet is pointed towards the outlet/drain so there should be minimal coolant time in the tank. The expansion tank is also slightly angled to have the outlet at the lowest point.
I followed the angle of the EWP150 from Davies Craig manual as well.
Link to parts:
Davies Craig EWP150 Electric Water Pump and LCD EWP & Fan Digital Control: amzn.to/3KYlE5g
Expansion tank: amzn.to/3qGwd61
Used to connect the expansion tank to radiator
Straight silicone radiator hose 12 in long 1.75 ID: amzn.to/3YUd6BX
Straight Aluminum Radiator Hose Connector, 1.75" O.D., 6" Length: amzn.to/3swKwdW
Used for Return to expansion tank from engine and from radiator to waterpump
Speedway Motors 90 Degree Radiator 1-1/2 Inch ID Hose Connector - Aluminum Alloy: amzn.to/47RYoiO
🎥 PREVIOUS VIDEO » • DIY - Building the ult...
Subscribe to my channel to join the Kill Mode Squad & hit the bell 🔔 so you never miss an upload! » / marnellbalmeo for new videos!
for new videos!
Follow me on
INSTAGRAM » / marnellbalmeo
TIKTOK » / marnellbalmeo
FACEBOOK: / marnellbalmeo4
FACEBOOK: / carnanigans365

[@bryancondrey6457]

lower your tank about 1/2".