DIY Busy Board Part 6

This is the final episode of series on how to make a wooden busy board. In this episode, I will add the LED lights, finish everything up, and give it to Leo.
You can find everything else I used in this project at my Amazon storefront at www.amazon.com/shop/woodumakeit.
Items I used during this project series include:
Grizzly G1023RLWX Table Saw amzn.to/2AGvqVV
INCRA Miter Gauge: amzn.to/2HTzvef
Freud 8" Super Dado Set: amzn.to/2TAO3C2
Ridgid Router: amzn.to/2FAfxVk
Freud 3/4" Double Flute Straight Router Bit: amzn.to/2DE3hRh
Titebond III Wood Glue: amzn.to/2qVPHRs
Porter-Cable Forstner bit set: amzn.to/2rOAsNQ
Freud 1/4" round over bit: amzn.to/2OnsCm3
Glue brushes: amzn.to/2CVIHdi
Corner squares: amzn.to/33YeJ4v
Copper Polish: amzn.to/32YJLaM
Solder: amzn.to/2QuQBT6
Solder flux paste: amzn.to/2r1M8fS
Dremel 3000: amzn.to/37h12ja
Bosch jig saw: amzn.to/32Ykjm7
3M blue tape: amzn.to/2CUKXBF
Band clamp: amzn.to/32WUXEY
Delta chop saw: amzn.to/3453dV2
Narex chisel set: amzn.to/2NYM8q8
Zinsser SealCoat: amzn.to/2QqQwQl
Minwax satin lacquer: amzn.to/2Ot0xJY
Thank you for subscribing to my channel! kzbin.info_c...
And be sure to check out my website at www.woodumakeit.com !
email: [e-mail]
Instagram: / woodumakeit
Facebook: / reallywoodumakeit
Twitter: / woodumakeit
Pinterest: / woodumakeit

[@Squabetty]

Wow! Wish I had your woodworking and electrical skills to build my own. What a fun project for you and such a gift for Leo and eventually many more. Thank you!

[@miguelquazar883]

You can do better...

[@sannaraza8723]

such a great idea! love it!

[@marie-francerubaudo1460]

Merci Mike Félicitations c'est très ingénieux !!!Leo a beaucoup de chance 👍😍

[@ry03pn]

Very cool. Very thoughtful.

[@zukzworld]

Lovely. Totally love it.

[@williambranham6249]

Excellent.I wish my grandsons were a little younger for more than one reason.

[@mstevens7175]

Looks great. I'd put a couple of pieces of dowel either side of where the cogs meet to stop them grinding their fingers between the cogs

[@user-hx4jg7tc4u]

Great they think the project is fantastic and the baby likes it a lot

[@mygarden365]

Mike, great job you are a great Grandpa.

[@user-oq9cr1ud3k]

Wow it seems to be fun! The baby looks so pretty;)

[@AlvaroLopez1]

Very impressive work Mike! Well done!!

[@arthurbalabko2591]

wooden toy for baby kzbin.info/www/bejne/qYfGm5Scmtd4pLM

[@lanesteele240]

I like it. The open gears teach him a life lesson. It is not always safe to poke your finger in something

[@anamonge6839]

Hermosos. Felicitaciones muy biena idea ☺

[@ozara-kelilahlevine8582]

Oh my gosh I absolutely love love it. I am actually looking to make one for my son. Gathering bits and bobs together. I love the idea of being able to take it pretty much anywhere other than mounting to the wall. Don't think mine will be as nice with LED lights and all. Thanks for sharing

[@Woodumakeit]

Thank you, Heidi. It's definitely nice that it's portable instead of being mounted or leaned against a wall. I'm sure your son will love whatever you come up with to put on the board. Good luck with your project! -- Mike

[@Asfia74]

I love you're Imagination!

[@cherry7638]

*Your

[@jasonschell6036]

@@cherry7638 One comment at a time. 😌

[@kdausu90]

So cool!!

[@mariaisabellunahernandez9680]

Está hermoso!!! Gracias por compartir

[@arthurbalabko2591]

wooden toy for baby kzbin.info/www/bejne/qYfGm5Scmtd4pLM

[@beverlystrause2320]

That's a great idea that keeps their little Minds occupied

[@MarsDidz]

now this guys, is a FIDGET BOARD.

[@AnthonyFrancisJones]

Fantastic - if you build things like this do watch the gears for little fingers and the door stop - if they trip they could easily get it straight into the eye though I note you have mounted it quite low possibly for that reason. Great work and for influencing the engineers of the future!

[@arthurbalabko2591]

wooden toy for baby kzbin.info/www/bejne/qYfGm5Scmtd4pLM

[@globalsmile]

The light switch function ? Goodie !

[@karenmckay1408]

I love this project. So clever. A smart toy. I noticed your ring. An engineer for sure ;)

[@Woodumakeit]

Haha, yes! You must be Canadian if you noticed that.

[@bigboyzworld9116]

This is awesome man i wanna do this now for my boy great project man thank you

[@WolfTac86]

Awesome!

[@Woodumakeit]

Thanks!

[@martinbrace7195]

Hi Mike Just watched your busy board project and it looked good so I have subbed. Oh and yes I Would Make It. Thanks

[@Woodumakeit]

Thanks for watching, and thanks for subscribing! Good luck with your project if you end up making a busy board. --Mike

[@RyDaSiDu]

Neat!

[@henkyandilolo2541]

Love it from indonesia..

[@alex1990moscow]

Man! This is great! This play board is the best diy play board i’ve seen. Going to make similar one for my son.

[@ewelinajiao1906]

great dad

[@barryroberts6470]

Brilliant Mike well done, little Leo does look cute a star in the making. Both of my kids are in their 20s and I'm not expecting any grandkids, not just yet anyway. Well done and at last those words at the end ha ha. Barry (ENG)

[@Woodumakeit]

Thank you, Barry! I worked hard to release the video early today so that you could watch it and sleep well tonight. :-)) As always, thanks for your comments!

[@arthurbalabko2591]

wooden toy for baby kzbin.info/www/bejne/qYfGm5Scmtd4pLM

[@suzicherneva3295]

it so nice 👍

[@frevanbeth4103]

Good work I have never done any woodwork, do you think I could make a simple one with a one inch plywood

[@renerubaudo]

super Mike pour ce que tu as fait

[@Woodumakeit]

Merci, René !

[@ruvilbaikin]

super

[@miguelquazar883]

Good stuff. It is much better to use a high voltage transformer instead of batteries Batteries are pricey.

[@persona5305]

Woow. I will make it something similar. Thank you :)

[@shavondamcgregor5196]

I LOVE this idea. I have a daughter that is very sensory oriented. This would a great way to capture her attention. Are you creating these for other individuals as well? I would love to replicate the idea, but I'm afraid I don't have the time.

[@crystalnailsbarltd3955]

Leo was so cute and how did your dad make those door knobs?

[@mosabekhet7519]

I am making it right now but i wondering if this metal pins wouldn't hurt him

[@MrWannmetal91]

nice sir. sorry for a noob question. but what resistor did u use for the LED light?

[@Woodumakeit]

It's just the LED strip connected directly to a 12V battery, so it does not require any resistors in the circuit.

[@ummabdulrazzaq]

Hi, do you sell this product? I’d love to make a purchase

[@xx_jay_xxjones3401]

7:03 did dust come off

[@yusunLJC85]

Does the shop(Home Depot, Lowe’s or Ace Hardware or Menard’s, etc) can make the right size wooden boards orrrr..???

[@Woodumakeit]

I know that those stores will cut wood for you, but I've always thought that was just to get the pieces into manageable and transportable sizes. I'm not sure whether or not they would make all of the cuts needed to get everything to the exact size you need, but it doesn't hurt to ask!

[@kastepatLaptitebricole]

Hello, Where are you from ? I'm in the south of France. Very well done project !

[@Woodumakeit]

I'm originally from Canada, but now I live in Virginia, USA. Leo's mother is from the south of France and his father is from Paris, but they now live in Virginia as well.

[@kastepatLaptitebricole]

I'm in the south, close to Montpellier and i've spend 10 years in CA for my job but i came back to France 20 years ago, so i'm loosing my english … ahahah

[@Woodumakeit]

Sounds pretty good to me. Your English is definitely better than my French! :-))

[@kastepatLaptitebricole]

Ahahah merci, I've many canadians watching my chanel but they are from Quebec ...

[@OldePhart]

I gotta ask, any issue with fingers in the gears? and did this keep his attention for as long as you hoped? I want to do this for my grandson but if he doesn't use it. . .

[@Woodumakeit]

He played with it for quite a bit for a couple of years. He definitely loved the LED lights. No issue with his fingers in the gears as far as I know, but if he did, that's just part of learning.

[@OldePhart]

@@Woodumakeit LOL, you aren't wrong :)

[@customconcepts4925]

Hi Mike!!! great job buddy!! i love the idea and i will be doing something similar for my baby... however, i do not encourage parents that want to do this great busy board to put the gears on it...! avoid purple baby fingernails and tears!!! everything else awesome!!! cheers!

[@arthurbalabko2591]

wooden toy for baby kzbin.info/www/bejne/qYfGm5Scmtd4pLM

[@zillousgrom4332]

Looks like there are lots of places a baby could pinch their fingers. Did you ever have any problems?

[@whthorse25]

Leo sure is a cutie! And we very nearly saw your wife.

[@Woodumakeit]

Ha ha! I was under strict instructions to show her only from the waist down. :-))

[@williambranham6249]

Good editing I suppose. Her upper half is on the cutting room floor as they say. Smart man.

[@arthurbalabko2591]

wooden toy for baby kzbin.info/www/bejne/qYfGm5Scmtd4pLM

[@mingzhao8459]

how old was he?

[@Woodumakeit]

He was about 14 months old in this video.

[@arthurbalabko2591]

wooden toy for baby kzbin.info/www/bejne/qYfGm5Scmtd4pLM

[@engleskibuldog7044]

cena proizvoda u evrima unapred hvala

[@luismariscal5269]

just one Comment ! Everything looks nice, just the Wheel gears looks kind of Danger for Baby, i Saw how he leaned His Hand on them!!just my point of View!!just need to be under supervision!!

[@AnnD2023]

Please don't use door stops with the plastic tips. I had a neighbor whose toddler choked on the small plastic piece that pops off and has severe brain damage because of it.

[@tomekapompey563]

I heard very good opinions about the Woodglut plans.