DIY Cake stand - Easy, Fast and cheap - great for weddings

[@asiabibi2727]

Looks awsome...great project

[@diymumzy8064]

Thank...hope you try it

[@capricapernell3764]

That was a very nice project and turned out amazing, what was the screw that’s you used to put in the middle to hold everything together

[@diymumzy8064]

Threaded rod...i bought mine from ebay...but is available at diy stores

[@Chocolate19]

I'll be making this...but may be a small version

[@johnnyd343]

I might suggest using PVC pipe fittings. The range of course in diameter and length. Not sure price wise if it be much cheaper then just going the tape route

[@diymumzy8064]

Hey....pvc pipes were my first choice but couldnt get a straight cut. I dont have a bench saw. so was difficult for me... cellotape rolls were perfect and cheap cost £1

[@johnnyd343]

@@diymumzy8064 I don't mean to keep the conversation going but I don't mean the pipes I mean the fittings that go at the end usually they are 2 to 4 inches in height and they were literally just a sleeve to join one type to another. But hey afterwards you got yourself a lifetime supply of tape :-)

[@carlajohnson8326]

Beautiful!! Where did you purchase the MDF boards?

[@diymumzy8064]

Mdf was from myers...they even cut to the size i wanted But you can get them from b&q and wood suppliers easily

[@carlajohnson8326]

DIY MONKEY thank you! I will be attempting this soon.

[@shivanirambarran1086]

Hii, I really love ur project😍. Do u have the messurement u used for each board? Please 😊

[@diymumzy8064]

First/bottom board was 16inched...each board decreased by an 1-2 inches

[@cutflower36]

Great idea! What did I use or where did u find the feet

[@diymumzy8064]

feet were from an old box i had - but you could use little wooden blocks they wont be seen so anything really

[@cqhb3246]

Can you tell me what you use instead of PVC pipes for the pillars, rolls of tape? I would love to try this.

[@diymumzy8064]

Yup rolls of tapes was the easiest...it was like a light blub went of in home bargins...easy to make as small and big by just removing a tape roll

[@cqhb3246]

thank you!

[@diymumzy8064]

Please subscribe so you dont miss another diy project

[@cqhb3246]

done!

[@shazspencer968]

Hi love can you please tell me the length of the metal rod please x

[@diymumzy8064]

he rod i used was 70 cm. but the rod can be shortened with a hack saw at any time if needed

[@yingvang2033]

how many inches is the threader rod and could you send me the link? Also could you tell me the dimension of each layer?

[@diymumzy8064]

www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR12.TRC2.A0.H0.Xthreaded+rod.TRS0&_nkw=threaded+rod&_sacat=0 mine was very lon so i cut it to size after figuring out the boards and pillars

[@yingvang2033]

link to to buy the threader rod?

[@diymumzy8064]

www.ebay.co.uk/sch/i.html?_from=R40&_trksid=p2380057.m570.l1313.TR12.TRC2.A0.H0.Xthreaded+rod.TRS0&_nkw=threaded+rod&_sacat=0

[@msellis36ify]

what is the size of the boards?

[@diymumzy8064]

hi the biggest one was around 20 inches , each board decreasing by 2 inches remember to subscribe !!

[@rabbitskinner]

You sound like youre from Leeds?

[@diymumzy8064]

Nearby..yorkshire