DIY CNC Router Part 2 // Building a Small CNC Router

[@hrbsouthbeach6818]

Awesome Job! I am 76 years of age, I have been waiting for someone like you, to do projects like this for years, there is three or four projects of your I want to build. Now I can have all the machines, I need in my shop. You are a God Sent. Your work is very much appreciate. Thank you, Ray

[@RexR256]

Gökmen ALTUNTAŞ !!!! WOW!!! AWESOME!! Thank you so much for taking the time to record and upload this video. I KNOW how time-consuming it is and I think I can say for everyone who watched it, THANK YOU !!!!!

[@ha13151]

Adam ne güzel yapıyor lan diye izlerken birden Türkçe açıklama gördüydüm gurur duydum sevindim hemen abone oldum beğendim. Bende yabancı biri yapıyor sandım youtube rastgele video seyrettirirken denk geldim. Ellerine sağlık Gökmen Usta! Ne mutlu Türküm diyebilene!

[@muhammetakgul5287]

Çok şükür bu işleri yapan bizim milletimizden saygı duyulacak duayyen ustalarimiz da var. Ve ne güzelki ölçü paylaşıyorlar. Ama yorumlara bakıyoruzki yorum yalanların çoğu yabancı. Başarılar saygıdeğer gökmen usta

[@حسینفخرابادی-ض6ر]

I am a carpenter and this machine is very useful for me. Thank you

[@andrewawenew]

На мой взгляд, самая оптимальная и простая в изготовлении конструкция ЧПУ фрезера для домашнего использования. Спасибо автору 👍👍👍

[@Paloma58]

Фантастика, просто супер! Золотые руки и бриллиантовая голова!

[@BigJohnno66]

You need to lubricate your lead screws. The squealing noise it made when you first moved it is from lack of lubrication. You also need to keep the guide rails clean and lubricated as well. Good build, it is amazing to see a CNC router with the structural parts all made from wood.

[@caseyfinn4682]

What would you suggest to use for lubricant?

[@BigJohnno66]

@@caseyfinn4682 I use a PTFE synthetic grease (SuperLube), however people also use light mineral oil. There is also spray on dry PTFE lubricant that people recommend in dusty environments, but I haven't tried that.

[@simonchetwynd]

Excellent, thank you. Love the format, just the right amount of essential information, like lead screws and linear rails. It’s the little things that help, never thought you could put a lead screw through a ball bearing like that. Will be building mine shortly but I can see a few things I might upgrade: not convinced about the router clamp being held on just with glue and I might 3D print the bearing housings rather than use wood. Trivial little upgrades really. Thank you again for putting in the effort to make these videos.❤

[@davidsneddon2242]

Absolutely astonishing detail and so complex in execution. This is simple perfection. Thank you so much for sharing GA.

[@АнатолийДурновцев-ф7в]

Я очень впечатлён классные станки. Вы супер мастер по фанере.

[@JPToto]

This is VERY well done. My new favorite DIY CNC video. Nice work!!!

[@ozaliozcelik3345]

İlk defa bir videoda, beğenmeyen görmüyorum. Tebrik ediyorum sizi 🙏🙏🙏

[@OktayGnz]

vallahi bravooo el yapımı cnc de ilk defa gördüm... Takdir ediyorum...

[@pedromiguelordonezrodrigue2500]

Hola soy de Perú, buenos días Justo desperté soñando sobre quién da más vueltas en un círculo sobre otro atravez de dos engranajes y terminé con la conclusión de hacer dos moldes como los que hicistes desperté prendí el celular y vi una notificación tuya y dije voy a verlo y sorpresá el molde soñado lo hicistes tu, oye amigo eres muy bueno en lo que haces, hasta en tus vídeos, que tengas un lindo día de Dios y Éxito en todo lo que hagas.👍

[@yousef30001]

Just fantastic. moreover, the most interesting thing is that your tools (drill, saw, ...etc ) are also mounted by you. Great.

[@beckseven]

Man I have to comment here, to thank you you opened my mind I'm going to make my project based on yours. and I want to thank you for sharing your knowledge without half terms. Congratulations and thank you. Unlike most videos that put this as an extremely difficult and almost impossible thing to do, you showed that it is possible in a very simple way.

[@taylord1337]

IM Building one as well. I have it almost done. I modeled most of the wood parts for 3d printing other that the base. I may make the base metal eventually as well. This is a great starting point though.

[@shamshairpardesi]

@@taylord1337 How much is the total cost?

[@taylord1337]

@@shamshairpardesi Around $200 or so. I spent a bit more becuase I got some wrong parts on accident. I used recycled wood for the frame as well so that helped.

[@shamshairpardesi]

@@taylord1337 May Allah bless you

[@taylord1337]

@@shamshairpardesi oh… ok?

[@rich3614]

My Son and I have been looking for a CNC router to build together...think we have found our design. Thank you for posting and the inspiration!!

[@yusufkuyuda]

Ne temiz anlatım tek kelime etmeden. Vallahi tebrikler

[@MrMEME48]

Toda mi admiración y respeto. Es usted un verdadero genio. Saludos desde México!!!

[@robertobarbosa1708]

This is the best project , and the final is greattest- God bless your house.

[@ismailcift]

Finally he did this too. This man is insane!!!

[@Tod_Unctious]

What a fantastic video thank you for sharing. Of all the self build videos i have watched yours is the most comprehensive. 👍👏👍👏👍👏

[@ogenmiller]

Мастерство высшего уровня 👍.

[@alfantebeite8659]

Very good, Gökmen ALTUNTAŞ, as always!!!

[@darrelbeaver3834]

will you make a third video showing how you set up the cnc with the computer and controll board settings.

[@minravex9919]

Same Request pls

[@edmundopoot5720]

Same recuest please

[@OGMann]

There are videos all over the place that talk about controllers, drivers, firmware, and control/gcode sender software. He's running candle, and probably grbl.

[@minravex9919]

@@OGMann there are yes ...but we wanted yours...

[@jesusartwood]

Poderia passar todo material e quantidade de cada um que nescessário para montagem?🙏

[@pablog.6339]

Excelente diseño y excelente trabajo. Es la CNC que más me gusta por el espacio de trabajo y que esta mas o menos resguardada del polvo y serrin que genera. probablemente haga este proyecto o similar a este. Muchas gracias

[@Painless61]

Awesome Job ... but i can‘t believe that it‘s so relativly easy to build a CNC ... but you did it ... 👍🏽

[@АлександрВладимирович-к2р]

Супер, браво маэстро) 👍👍👍👌✋.

[@andysilver84]

Unbelievably great, so much engineering went into this project. 👍🏻

[@Mehmetttt1453]

Gökmen usta ellerine sağlık. Sevgiler saygılar 👏👏👏

[@edindinho]

You are just AMAZING!!! 👏🏼👏🏼👏🏼👏🏼👏🏼 Hugs from Rio de Janeiro ✌🏻

[@keithlyons4867]

Stunning you've made me want to make one for myself Thank you

[@abm9547]

GREETINGS, I AM A NEW SUBSCRIBER AND I WANT TO THANK YOU FOR SHARING YOUR KNOWLEDGE AND DETAILS OF THE MEASUREMENTS AND MATERIALS USED IN YOUR PROJECT, I WISH YOU A LOT OF SUCCESS, HEALTH AND BLESSINGS.

[@victorianomg3782]

You are a monster, teacher, thank you for your contributions.

[@juangaona1891]

Exelente proyecto gracias por compartir para nosotros q estamos comenzando al arte dela carpinteria

[@WALEEDQ-qi1hx]

Thank you, my dear friend, always creative.

[@unveraydin1255]

Ellerine saglik calismalarida basarilar dilerim.Titiz calismani cok begendim ,paylastigin icin tesekkurler.

[@fabiomantilla8026]

Excellent my friend! Thanks you. Your project is very practical for all us. Congratulations.

[@dam1lor]

Just one word: WOW!

[@giannismarkidis9546]

This the best..tool. i am proud for you. . John ...from Greece.

[@AlexandrParshev]

Спасибо! Хорошая идея! Thanks! Good idea!

[@tariktariki5454]

Good work, only the teacher can come. Thank you👍👌👍

[@hercules7548]

Μπράβο φίλε γείτονα, είσαι πολύ μεγάλος καλλιτέχνης.

[@serdark7706]

Gökmen Bey emeğinize sağlık, detaylı izah, ayrıntılı ölçüler ve malzemeler için ayrıca teşekkürler

[@DamarinaV]

Wow.. Bravo. Teşekkür ederim.

[@hdl4259]

Nice little mschine, well done. When you will build the big brother? :)

[@viktorviktor5593]

Просто и доступно. Превосходное исполнение

[@pnt1035]

Two excellent and very encouraging videos. I'm in the process of upgrading a small CNC router and really enjoyed watching yours.

[@handicraftirfanwoodworking9434]

You are a teacher of perfection

[@w.r.5445]

Super sprawnie to Panu poszło aż miło popatrzeć. Na filmie wygląda to tak jag by frezarka zrobiona została w jedno popołudnie. Sam chcę zbudować co takiego 👍 👏👍 Pozdrawiam

[@ronaldorodrigues2399]

voce e um genio parabens meu amigo

[@chyrochnik]

Я впечатлен!!! Здорово и удачи!

[@KaBBBram]

First off i want to say that you built an excellent CNC machine! I am building one based on your design and i was wondering whether you have any problems with the z-axis stiffness (is there any play) because of the use of only a metal rod instead of the guide rails you are using for the x- and y-axis. Keep up the great content!

[@ck686]

Mate, great job. I'm essentially going to do thing in the next couple of weeks

[@AzharAli-ck7dc]

Extraordinary build. Ma Sha Allah. I am waiting for next video for software setting. After your next video I will start my own mini cnc. IN SHA ALLAH.

[@VladimirMilyaev]

An amazing thing is that almost all machinery beside basic tools is self-made. The video looks great. Some important measurements were left behind the scene. However, people, who is able to make similar stuff, can recover the logic and, in addition, learn a lot of tricks. I have just got all mechanical parts and going to rebuild my first version of CNC which was made of furniture rulers. Thanks a lot for this video!

[@seilah8]

Have you watched the video till the end? He showed every single measurement information needed for the project.

[@sergioespinosa6377]

Ahora a reunir los materiales y comenzar a armar. Solo haré una modificación. 2 motores en el eje Y. Muchas gracias por "regalar" tus conocimientos. Un abrazo. 🖖🖖

[@SuperRicoMiguel]

Muchísimas gracias Gökmen, será mi próximo proyecto 👍

[@fagnerklimaweski6644]

Hola amigo buenas tardes también la voy a montar ya tengo todas las piezas solo me falta cortar la madera, si puedes pasar un contacto para cambiarnos informaciones

[@llMuratll]

sen ne güzel bir insansın hocam :).

[@حسینفخرابادی-ض6ر]

Hello, I am Iranian and the cost of a CNC machine in Iran is very high Thank you for telling me the accessories and supplies for me to provide Thanks

[@RexR256]

Hello from the USA. I hope you get your CNC machine up and running! Even in the US, it isn't easy without the help of videos like this. I have no idea whats it's like to acquire the parts in Iran.

[@micaelpetrovih7072]

Классный станок👍 И Отличный канал!!!

[@dohjryt]

Nice work! I’m inspired.

[@pierreetleloup7846]

Exelent...! Bravo 👏 !

[@4pp0ll0n]

Very well done, Sir! Thank you for showing the measurements

[@yalcin1234]

Maliyeti nedir bilmiyorum ama Çin mali 3018 den çok daha üstün bir makine oldu. Seri üretime geçip satışını yapmalısınız 👍🏻

[@schm4704]

Well done, thanks for sharing! This project looks really accessible. If only I had the space for one of these... 🥴

[@pinkponyofprey1965]

I'm not even sure I understand what I saw??? Is it spectacularly simple or simply spectacular or both? :D

[@darkwinter6028]

They make “compression” router bits for plywood. They have the spiral flutes heading towards a point in the middle of the bit (from both the top and bottom) so that the cutting forces don’t produce tear-out of the top layer.

[@freddiesoft]

Nice work! One doubt, the router holder stays just glued? No screws?

[@luigiciriolo1179]

Great creation, definitely one of simplest and most efficient I saw on youtube! Bravissimo:) Why did you go for a lead4 rather than a lead2 T8 screw? The ones you used are pitch2 mm correct?

[@railahmedov555]

Молодец!светлая голова.

[@prasadp2878]

What's the cnc software that you use in the video... Plz mention that one also..

[@justmethenetherlands2218]

turned out to be a beautiful machine! It would have been cheaper to order a 1000mm linear rail instead of 400mm and 600mm and then saw it through.

[@bigsparky65]

Very interesting, excellent job. Thanks for sharing

[@christiferray5605]

It looks like he just upcycled a 3018 prover. Blue backing for the board. Also I believe those are the same stepper motors. Way to make one of those small machines work harder for you.

[@joerideman]

well done. Looks so simple.

[@khalidalmasry501]

Please if you know the operating program Share it

[@bebotggon646]

@@khalidalmasry501 qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq¹¹

[@raunakmuz]

Hi, Can you show how you downloaded and used software part?

[@徐则成]

Thank you so much, your sharing spirit is great

[@seyitaydogdu6237]

Çok başarılı, elinize emeğinize sağlık 👏

[@edsonferraz1]

Congratulations, great video, thanks a lot

[@dulcecaramel3308]

Excelente amigo!! Gracias por enseñarnos y compartir tus conocimientos, un abrazo desde México

[@rhoadsfan]

That’s amazing.. you do great work.. can you tell me please what is the software you’re using?

[@you.r.amazing]

You are the best!, please, tell us what software you use to control your cnc. Tank you.

[@EleazarMDisla]

Awesome Job. Highly recommended 🙌🏻🙌🏻 What was the inside diameter for the 19mm ball bearings you used? I didn’t see in the description. Thanks again. Blessings👍👍👍

It's called 698 zz ball bearing, dimensions: 8x19x6

[@ilkergokyokus]

bu zannedersem son nokta oluyor helal olsun.

[@sergioespinosa6377]

Ohhh. Perfectoooo 👏🏻👏🏻. Muy buen trabajo, una vez más 🖖🖖

[@asumanmakas8294]

Ellerine sağlık harikasın kolay gelsin

[@DIY_Engineering]

Very nice job, man! 👍😀

[@manuelgti6766]

Ha quedado muy bien, Felicitaciones 👏👍

[@QuangNguyen-tn7fh]

Amazing DIY with clear instruction. However I look thru all parts from Aliexpress take so long to order (i haven't use Aliexpress at all) It will be great If I can find all part on Amazon. Thank you very much. Keep it up with great DIY

[@tjacksonwoodworker3726]

very well done. I enjoy your videos. Keep up the good work.

[@marcio6498]

Excellent work my friend. Can you pass the link to the GRBL program used? Please.

[@ruimartins4868]

Magnifico trabalho 👍🏻 ⭐️⭐️⭐️⭐️⭐️

[@Antoniorodrigues-zx2oy]

Parabéns pelos vídeos. Muito bons.

[@darkwinter6028]

If you are not using zero-backlash ball screws; you should probably use two leadscrew nuts per axis. This allows you to adjust them relative to each other to remove backlash.

[@e.kostadinidis]

Μπράβο φίλε καλή δουλεία!!!!!

[@mareDBS]

Thank you mister, This will be my next project. I don't know anything about cnc :-/

[@juliocesarbanega7690]

excellente CNC!!!!

[@kamalbrico199]

Excellente CNC Bravo,🥇🎓

[@MultiTom1956]

Brilliant build 👌👌

[@esparbel30]

Great tutorial, thanks. What is the effective size of the work area?